Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “optical structures”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 991 records · Page 55

Thin-film light-intensity measurement strain-analysis technique.

The optical response to loading of a thin metallic film deposited on a low-modulus structural substrate is studied theoretically and experimentally. Two types of optical properties called total and central-image transmittance (or reflectance) are shown to be related to the mechanical state of the substrate. Empirical optical-mechanical relationships are proposed between these optical properties and the substrate strain field of a general plane-stress problem. A technique based on wrinkle and microfracture patterns is described for determining principal directions of strain. Experimental results for uniaxially loaded specimens show that it is possible to obtain a nearly linear relationship between transmittance and strain for certain materials combinations.

Williams, J. G.↗

Receiver processing for direct-detection optical communication systems.

A model that is sufficiently general to describe the predominant statistical characteristics of the output of many real optical detectors is formulated. This model is used to study the optimum receiver processing for direct-detection optical communication systems. In particular, the structures of detectors and estimators for filtered doubly stochastic Poisson processes (DSPP) observed in additive white Gaussian noise are considered. Representations for the posterior statistics of a vector Markov process that modulates the intensity of the DSPP are obtained.

Hoversten, E. V.↗

Solid state image sensing arrays

The fabrication of a photodiode transistor image sensor array in silicon, and tests on individual elements of the array are described along with design for a scanning system for an image sensor array. The spectral response of p-n junctions was used as a technique for studying the optical-absorption edge in silicon. Heterojunction structures of Sb2S3- Si were fabricated and a system for measuring C-V curves on MOS structures was built.

Sadasiv, G.↗

Infrared spectroscopy of lunar mare regolith

Spectra of reflection, emission, and transmission of regolith returned by the Luna 16 automatic station were investigated in the 1.8-13 micrometers region. A reflection maximum was shown to be present in the region 3 to 5 micrometer, along with a corresponding minimum in the emission coefficient. The spectra were interpreted based on a comparison of the optical properties with the chemical and structural properties of the regolith. The regolith in the entire array of properties in the infrared region differs appreciably from terrestrial objects. Spectra of diffuse reflection and the spectra at angles of incidence 0 deg and angles of reflection 15 and 30 deg with samples of the regolith returned by the Apollo 11 and Apollo 12 missions revealed a similarity of the infrared reflection characteristics of the regolith from different lunar mare regions.

M. V. Akhmanova↗

The potential of multi-port optical memories in digital computing

A high-capacity memory with a relatively high data transfer rate and multi-port simultaneous access capability may serve as the basis for new computer architectures. The implementation of a multi-port optical memory is discussed. Several computer structures are presented that might profitably use such a memory. These structures include (1) a simultaneous record access system, (2) a simultaneously shared memory computer system, and (3) a parallel digital processing structure.

Alford, C. O.↗

Design alternatives for the Shuttle Infrared Telescope Facility

The paper discusses the Shuttle Infrared Telescope Facility (SIRTF), a versatile astronomical telescope that can accomodate photometric, spectroscopic, and polarimetric measurements. It is expected to be 100 to 1000 times more sensitive than any existing infrared telescope; detailed designs of cooled IR telescopes were made for the Infrared Astronomical Satellite and the Small Helium Cooled Infrared Telescope for Spacelab 2. Rocket tests verified the capability of using superfluid helium as a cryogen in zero gravity. Constraints on funds for Shuttle payloads require an evolutionary approach to the development of the full potential of SIRTF, necessitating consideration of design alternatives involving the optical configuration, the cryogen, the mechanical structure, and size of SIRTF.

Witteborn, F. C.↗

Infrared observations of the Saturnian system from Voyager 1

Atmospheric chemistry analyses of Saturn based on Voyager 1 infrared spectral and radiometric data are presented, including characteristics of the planet's rings and of Titan and other satellites. Infrared spectra of Saturn indicate the presence of H2, CH4, NH3, PH3, C2H2, and C2H6, with the possibility of C3H4 and C3H8. The atmospheric thermal structure of the planet shows hemispheric asymmetries that are consistent with seasonally varying insolation response, with an extensive small-scale latitudinal structure. Atmospheric chemistries of Titan, and optical and thermal characteristics for the rings of Saturn, are also given.

Hanel, R.↗

Convective accretion disks and the onset of dwarf nova outbursts

Vertically integrated, steady state convective models of accretion disks have been constructed to explore the mechanism of instability in dwarf novae. The models and observations of dwarf novae suggest a picture in which transferred matter piles up in an optically thin torus. The torus eventually becomes optically thick, and the resulting convective structure is thermally unstable. Matter then flows inward, and the sudden conversion of gravitational potential energy to radiation is identified as the dwarf nova outburst. At sufficiently high mass accretion rates, the inflow is continuous.

Cannizzo, J. K.↗

High-resolution X-ray observations of M87 - Nucleus, jet and radio halo

X-ray observations of M87 made using the Einstein Observatory HRI show the presence of four components. A broad, diffuse component associated with hot gas in the galaxy follows an approximate inverse power law; the pressure of the gas could be sufficient to confine the inner and outer radio lobes. A diffuse, asymmetrical X-ray distribution to the east and southwest appears similar to the radio morphology and is consistent with an inverse Compton model. An X-ray source centered on the nucleus of the galaxy is extended by 2-3 arcsec and may be due to thermal bremsstrahlung; a possible compact source of less than 10 to the 41st ergs/sec is weak compared with other active galaxies, and its implications for the presence of a massive black hole are discussed. A structure correlated with the radio-optical jet is also seen; the X-ray flux is consistent with an extrapolation of the optical synchrotron spectrum. The four components suggest that all three canonical astrophysical X-ray emission mechanisms are present in M87: thermal bremsstrahlung, inverse Compton scattering, and synchrotron radiation.

Schreier, E. J.↗

The structure of Saturn's rings - Implications from the Voyager stellar occultation

A 100-m resolution has been obtained in the radial direction, across the entire Saturn ring system, in Voyager 2 photopolarimeter observations of Delta Scorpii as it was occulted by the rings. An automatic search with finite Fourier transforms located 13 density waves excited by resonances with Saturn's satellites. Although strong density waves can be easily located, no waves have been identified which have predicted torques/surface mass density values lower than 4 x 10 to the 16th cu cm/sec-squared. This suggests a limit of less than 100 waves to be found in the Saturn rings. Total ring mass is estimated as 5 x 10 to the -8th of the mass of Saturn. The power spectrum for the rings shows no dominant individual wavelengths. The majority of ring structures and most variance in ring optical depth are not explainable by currently entertained physical mechanisms.

Esposito, L. W.↗

Shock-induced CO2 loss from CaCO3: Implications for early planetary atmospheres

Recovered samples from shock recovery experiments on single crystal calcite were subjected to thermogravimetric analysis to determine the amount of post-shock CO2, the decarbonization interval and the activation energy, for the removal of remaining CO2 in shock-loaded calcite. Comparison of post-shock CO2 with that initially present determines shock-induced CO2 loss as a function of shock pressure. Incipient to complete CO2 loss occurs over a pressure range of approximately 10 to approximately 70 GPa. Optical and scanning electron microscopy reveal structural changes, which are related to the shock-loading. The occurrence of dark, diffuse areas, which can be resolved as highly vesicular areas as observed with a scanning electron microscope are interpreted as representing quenched partial melts, into which shock-released CO2 was injected. The experimental results are used to constrain models of shock-produced, primary CO2 atmospheres on the accreting terrestrial planets.

Lange, M. A.↗

The C ring of Saturn: A high resolution view of some of its structure

Voyager 2 photopolarimeter stellar occultation data on Saturn C ring are discussed. The overall shape is much like the W-shape of other Saturnian rings and the Uranian epsilon ring. The inner structure is quite complex and it is not possible to locate the region of the weaker 1980S27 resonance. There appear to be pseudoperiodic structures, with very pronounced variations in optical depth. Possibly two isolated resonances in close proximity can develop a gravitational interaction that leads to wave patterns imposed upon the intervening ring material. The strength of the variations noted in optical depth between 90140 and 90175 km is too large to be an artifact. It could be temporal, however.

Lane, A. L.↗

An infrared study of the NGC 1977 H II region/molecular cloud interface

The results of an infrared study of the H II region NGC 1977 and the adjacent dense molecular cloud are reported. Extensive far-infrared maps with 45 arcsec resolution allow the spatial structure of the dust temperature and optical depth variations across the ionization front to be delineated. Analysis of the dust energetics indicates that the only significant energy source is the B1 V star HD 37018 which ionizes the H II region. This result, together with a favorable geometry, provides a good opportunity to determine the ratio of ultraviolet absorption efficiency to far-infrared emission efficiency, 790 + 460 or - 180. Analysis of the gas energetics indicates that collisions with warm dust grains can explain the observed gas temperatures.

Makinen, P.↗

Shock-induced CO2 loss from CaCO3 - Implications for early planetary atmospheres

Recovered samples from shock recovery experiments on single crystal calcite were subjected to thermogravimetric analysis to determine the amount of post-shock CO2, the decarbonization interval and the activation energy, for the removal of remaining CO2 in shock-loaded calcite. Comparison of post-shock CO2 with that initially present determines shock-induced CO2 loss as a function of shock pressure. Incipient to complete CO2 loss occurs over a pressure range of approximately 10 to approximately 70 GPa. Optical and scanning electron microscopy reveal structural changes which are related to the shock-loading. The occurrence of dark, diffuse areas, which can be resolved as highly vesticular areas as observed with a scanning electron microscope are interpreted as representing quenched partial melts, into which shock-released CO2 was injected. The experimental results are used to constrain models of shock-produced, primary CO2 atmospheres on the accreting terrestrial planets.

Lange, M. A.↗

Active Control Evaluation for Spacecraft (ACES)

The Air Force goal is to develop vibration control techniques for large flexible spacecraft by addressing sensor, actuator, and control hardware and dynamic testing. The Active Control Evaluation for Spacecraft (ACES) program will address the Air Force goal by looking at two leading control techniques and implementing them on a structural model of a flexible spacecraft under laboratory testing. The first phase in the ACES program is to review and to assess the High Authority Control/Low Authority Control (HAC/LAC) and Filter accomodated Model Error Sensitivity Suppression (FAMESS) control techniques for testing on the modified VCOSS structure. Appropriate sensors and actuators will be available for use with both techniques; locations will be the same for both techniques. The control actuators will be positioned at the midpoint and free end of the structure. The laser source for the optical sensor is mounted on the feed mast. The beam will be reflected from a mirror on the offset antenna onto the detectors mounted above the shaker table bay. The next phase is to develop an analysis simulation with the control algorithms implemented for dynamics verification. The third phase is to convert the control laws into high level computer language and test them in the NASA-MSFC facility. The final phase is to compile all analytical and test results for performance comparisons.

Pearson, J.↗