Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “FLUID MEASUREMENT”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 991 records · Page 55

A Hydro-based MCMC Analysis of SNR 0509–67.5: Revealing the Explosion Properties from Fluid Discontinuities Alone

Using Hubble Space Telescope/ACS Hα images of SNR 0509–67.5 taken ~10 yr apart, we measure the forward shock (FS) proper motions (PMs) at 231 rim locations. The average shock radius and velocity are 3.66 ± 0.036 pc and 6315 ± 310 km s –1 . Hydrodynamic simulations, recast as similarity solutions, provide models for the supernova remnant’s expansion into a uniform ambient medium. These are coupled to a Markov chain Monte Carlo (MCMC) analysis to determine explosion parameters, constrained by the FS measurements. For our baseline model, the MCMC posteriors yield an age of 315.5 ± 1.8 yr, a dynamical explosion center at 5 h 09 m 31. s 16, $-67^\circ 31^{\prime} 17\buildrel{\prime\prime}\over{.} 1$ and ambient medium densities at each azimuth ranging over 3.7–8.0 × 10 –25 g cm –3 . The age uncertainty can be an order of magnitude larger when considering other models, or subsets of the data. We detect stellar PMs corresponding to speeds in the Large Magellanic Cloud ≥ 770 km s –1 . Five stars in the remnant show measurable PMs but none are moving radially from the dynamical center. There are four stars 1."4 from the center, including three faint, previously unidentified ones. Using coronal [Fe XIV ] λ5303 emission as a proxy for the reverse shock location, we constrain the explosion energy (for a compression factor of 4) to a value of E = (1.30 ± 0.41) × 10 51 erg for the first time from shock kinematics alone. Higher compression factors (7 or more) are strongly disfavored based on multiple criteria, arguing for inefficient particle acceleration in the Balmer shocks of SNR 0509–67.5.

79 ASTRONOMY AND ASTROPHYSICS↗

The Effect of Working Fluid Composition on Heat Transfer in a Direct Supercritical CO2 Power Cycle Recuperator

For pure CO2, the experimental measurements of the heat transfer coefficient in this paper agreed to within 5% of the classical Dittus-Boelter correlation. When nitrogen was added to the CO2 at concentrations from 0–28% nitrogen, these experiments found that the measured Nusselt numbers decreased by 20% below the Dittus-Boelter correlation evaluated with thermophysical properties for the N2/CO2 gas mixture. In general, the McAdams correlation evaluated with mixture properties predicted the friction factor within ±10%.

Searle, Matthew↗

Idaho National Laboratory Experimental Program to Measure the Flow Phenomena in a Scaled Model of a Prismatic Gas-Cooled Reactor Lower Plenum for Validation of CFD Codes

The experimental program that is being conducted at the Matched Index-of-Refraction (MIR) Flow Facility at Idaho National Laboratory (INL) to obtain benchmark data on measurements of flow phenomena in a scaled model of a prismatic gas-cooled reactor lower plenum using 3-D Particle Image Velocimetry (PIV) is presented. A description of the scaling analysis, experimental facility, 3-D PIV system, measurement uncertainties and analysis, experimental procedures and samples of the data sets that have been obtained are included. Samples of the data set that will be presented include mean-velocity-field and turbulence data in an approximately 1:7 scale model of a region of the lower plenum of a typical prismatic gas-cooled reactor (GCR) similar to a General Atomics Gas-Turbine-Modular Helium Reactor (GTMHR) design. This experiment has been selected as the first Standard Problem endorsed by the Generation IV International Forum. The flow in the lower plenum consists of multiple jets injected into a confined cross flow - with obstructions. The model consists of a row of full circular posts along its centerline with half-posts on the two parallel walls to approximate flow scaled to that expected from the staggered parallel rows of posts in the reactor design. The model is fabricated from clear, fused quartz to match the refractive-index of the mineral oil working fluid. The benefit of the MIR technique is that it permits high-quality measurements to be obtained without locating intrusive transducers that disturb the flow field and without distortion of the optical paths. An advantage of the INL MIR system is its large size which allows improved spatial and temporal resolution compared to similar facilities at smaller scales. Results concentrate on the region of the lower plenum near its far reflector wall (away from the outlet duct). Inlet jet Reynolds numbers (based on the jet diameter and the time-mean average flow rate) are approximately 4,300 and 12,400. The measurements reveal developing, non-uniform flow in the inlet jets and complicated flow patterns in the model lower plenum. Data include three-dimensional vector plots, data displays along the coordinate planes (slices) and charts that describe the component flows at specific regions in the model. Information on inlet velocity profiles is also presented.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Stretch-rate relationships for turbulent premixed combustion LES subgrid models measured using temporally resolved diagnostics

Temporally resolved measurements of turbulence-flame interaction were used to experimentally determine relationships for the strain-rate and curvature stretch-rate exerted on a premixed flame surface. These relationships include a series of transfer functions that are analogous to, but not equal to, stretch-efficiency functions. The measurements were obtained by applying high-repetition-rate particle image velocimetry in a turbulent slot Bunsen flame and were able to resolve the range of turbulent scales that cause flame surface straining and wrinkling. Fluid control masses were tracked in a Lagrangian manner as they interacted with the flame surface. From each interaction, the spatially and temporally filtered subgrid strain-rate and curvature stretch-rate were measured. By analyzing the statistics of thousands of turbulence-flame interactions, relationships for the strain-rate and curvature stretch-rate were determined that are appropriate for Large Eddy Simulation. It was found that the strain-rate exerted on the flame during these interactions was better correlated with the strength of the subgrid fluid-dynamic strain-rate field than with previously used characteristic strain-rates. Furthermore, stretch-efficiency functions developed from simplified vortex-flame interactions significantly over-predict the measurements. Hence, the proposed relationship relates the strain-rate on the flame to the filtered subgrid fluid-dynamic strain-rate field during real turbulence-flame interactions using an empirically determined Strain-Rate Transfer function. It was found that the curvature stretch-rate did not locally balance the strain-rate as has been proposed in previous models. A geometric relationship was found to exist between the subgrid flame surface wrinkling factor and subgrid curvature stretch-rate, which could be expressed using an empirically determined wrinkling factor transfer function. Curve fits to the measured relationships are provided that could be implemented in numerical simulations of turbulent premixed combustion. (author)

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Turbulence-induced bias in time-averaged laser absorption tomography of correlated concentration and temperature fields with a first-order correction

The influence of correlated scalar fluctuations on time-averaged laser absorption tomography measurements of temperature and species in a piloted turbulent premixed flame was examined using a coupled spectroscopic and fluid-dynamic analysis. To understand bias associated with turbulence, spatio-temporally resolved temperature and species mole fraction profiles predicted by large eddy simulations (LES) were used to synthetically generate time-resolved line-of-sight absorption measurements at short time scales (microsecond) to reflect the unsteady nature of a canonical jet burner across various transverse measurement planes. Inversion methods were employed on the time-averaged line-of-sight data to produce radially-resolved temperature and mole fraction profiles, analogous to those produced by laser absorption tomography performed on a time-averaged axisymmetric flowfield. It is shown that bias in the measurements compared to true time-averaged scalar fields is a function primarily of temperature dependence in absorptivity and non-zero correlation between temperature and species concentration scalars. Finally, a first-order correction to tomography measurements is proposed to account for the bias based on estimated correlations and the known spectroscopic parameters of the probed absorption transitions.

42 ENGINEERING↗

Formation of hydrocarbons favored by high pressure at subduction zone conditions

Subduction zones enable carbon transport to the deep Earth. Inorganic and organic carbon in fluids released from the subducted slab are important in water-rock interactions. However, the potential role of reduced carbon species in fluids during subduction is still unclear. In particular, the pressure, temperature, and oxidation state conducive to the formation of fluid hydrocarbons are poorly understood. Here we focused on the role of pressure influencing the formation of hydrocarbons using diamond anvil cell experiments starting with 0.5 M Ca-acetate solutions over a broad range of pressures, from 1.6 to 4.6 GPa at temperatures of 300 and 350°C. Droplets of immiscible hydrocarbon fluid coexisting with aqueous carbonate or bicarbonate and crystals of calcite or aragonite were formed at peak pressure and temperature conditions in the experiments. Furthermore, greater quantities of hydrocarbons formed at higher pressure as revealed by measuring the in situ volume percent of the droplets. Measurement of the in situ Raman spectra of the co-existing aqueous solutions and analysis of the peak area ratios of acetate to HCO 3 – showed faster decrease at higher pressure, which indicated that the reactions forming hydrocarbons were accelerated by pressure. Compared to previous Na-acetate experiments at 300°C and 3.0 GPa, this study found hydrocarbons that were more methane-rich and had more propane and less isobutane. In experiments at 350°C, isobutane transformed to one or more aromatic hydrocarbons in an immiscible fluid. The air-dried aromatic hydrocarbons were measured using a UV laser, and show peaks of bitumen. Overall, our study supports the hypothesis that high pressures and high temperatures facilitate the possible occurrence of immiscible hydrocarbon fluids in the deep carbon cycle.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Investigation of Flux Spreading in a Light-Trapping, Planar-Cavity Receiver for Enclosed Solar Particle Heating

Concentrating solar thermal power (CSP) technology development has recently focused on increasing the operating temperatures to accommodate high efficiency power cycles and thermochemical processes. Inert solid particles as heat transfer media enable solar receivers to operate above 700 degrees Celsius resulting in increased system thermal efficiency compared to the conventional molten salt based CSP system. An open-cavity falling-particle solar receiver that can efficiently heat particles by direct heating from concentrated solar radiation faces challenges with large particle losses from wind and unable to support thermochemical reactions. A light-trapping, planar cavity reiver (LTPCR) where particles are indirectly heated can significantly minimize the particle losses during the operation, support thermochemical reactions, and offer scalability potential. The LTPCR features an array of vertical planar receiver/absorber panels arranged within a cavity configuration. Concentrated solar radiation from heliostats is focused onto the receiver walls, where heat is indirectly transferred to solid particles flowing inside the receiver channels. Heat transfer occurs through direct contact between the receiver panel walls and particles, and can be enhanced by fluidizing particles with air. This fluidization increases particle-wall contact and extends particle residence time, maximizing heat transfer efficiency. The unique vertical planar receiver structure originated from a near-blackbody tubular light absorber, effectively distributing the incoming solar beam spread across the panel walls and trapping light. This flux spreading effect, driven by cosine projection, converts high incident solar flux into a lower, more uniform heat flux on the panel walls. This redistribution enhances heat transfer efficiency between particle-wall or reaction gases-wall, while preventing localized overheating of the receiver panel. Indirect planar cavity solar receivers completely separate solid particles from the ambient environment that can greatly reduce the thermal losses in heated particles resulting in high efficiency at high temperatures above 700 degrees Celsius. This design ensures no particle losses to the environment during the operation while open-cavity designs can experience significant particle losses from wind. An experimental investigation was conducted to observe flux spreading on the receiver panel wall. A lab-scale prototype planar receiver, fabricated using Haynes 230 alloy, was tested under direct concentrated solar radiation using the high-flux solar furnace (HFSF) facility at NREL. The experiment was performed under normal peak radiative heat fluxes ranging from 800 to 1900 kW/m2. A temperature distribution on the panel wall was measured using a thermal imaging camera (FLIR A 6600). To prevent overheating at the receiver front tip, prism-shaped heat shields (Zircar UNIFROM C1) were placed in front of the receiver, and their influence on flux spreading was also studied. Absorbed flux distribution on the panel wall was modeled using SolTrace. The total solar power and flux distributions delivered from HFSF were determined based on the heliostat mirror optical properties, direct normal irradiance (DNI) on the on-sun testing days, peak flux measurement during the on-sun testing, and shutter/attenuator settings Due to the large incident angles of the solar beam on the panel wall, the angular optical properties of Haynes 230 alloy and Zircar heat shields were incorporated into the model. This flux distribution model was then integrated into a computational fluid dynamics (CFD) simulation to predict the receiver panel wall temperature, which was compared with the experimental measurements. Both prediction and measurements identified a temperature hotspot at the backside of the panel, indicating that the incident solar beam can fully reach to the rear of the receiver. The heat shields positioned at the front of the receiver effectively reduced the excessive temperature rise at the receiver front tip. Overall, the temperature was well distributed over the panel wall, with a minor hotspot at the back of the receiver. The model slightly overpredicted the temperature, possibly due to discrepancies in optical properties of the panel and an underprediction of thermal loss in the receiver. The advancement of the particle LTPCR offers a viable alternative to open-cavity receivers by addressing particle loss issues. Additionally, it presents a pathway for enabling solar thermochemical processes, extending CSP technology beyond power generation to fuel and chemical production.

14 SOLAR ENERGY↗

Numerical and Physical Simulation of the Fluid Flow in a Beam Blank Mold Fed Through the Center of the Web

Fluid flow inside a beam blank mold fed through a three-port SEN (two lateral ports and one bottom port), positioned at the center of the mold, has been investigated. Literature survey shows that this kind of configuration is not frequently used. It had been shown that it is possible to get a symmetrical flow with this configuration. The downward inclination of the ports should influence the transient fluid flow. The greater the downward inclination, the greater is the instability of the jet and of the interface between the immiscible fluids that simulate the slag/metal behavior. The flow characterization was made by dye dispersion, PIV technique, measurement of the meniscus oscillation using ultrasonic sensors, and CFD simulations. The slag/metal behavior was simulated using water and oils with different physical properties. The results from PIV as well as from observations of the water–oil interface have been used to validate the CFD simulations. Oils with density close to water resulted in more instability at the interface with entrainment starting from fluid flow rate of 125 L/min (equivalent to casting speed of 1 m/min). Decreasing the viscosity of slag (oils) and increasing the casting velocity (water flow rate) result in reduction of the interfacial stability.

36 MATERIALS SCIENCE↗

Correlation between Antimicrobial Activity and Bioactivity of Na-Mica and Na-Mica/Fluorapatite Glass and Glass-Ceramics and Their Corrosion Protection of Titanium in Simulated Body Fluid

The improvement in bioactivity of titanium (Ti) surface was achieved via coating it with Na-mica and Na-mica/fluorapatite glass and glass-ceramic using the low-cost electrophoretic deposition technique. Two compositions from pure Na-mica (M) and 80 Na-mica/20 fluorapatite glasses (MF) were prepared in the system SiO{sub 2}-Al{sub 2}O{sub 3}-MgO-MgF{sub 2}-Na{sub 2}O-B{sub 2}O{sub 3} using melting–quenching technique. Characterization of the as-prepared glasses and their counterpart glass-ceramics was studied using differential thermal analysis (DTA), x-ray diffraction (XRD), Scanning Electron Microscopy (SEM) and Fourier Transform-IR (FTIR) spectroscopy techniques. The bioactivity behavior was proved by studying the XRD, FTIR and SEM after immersing both glass and glass-ceramic samples in simulated body fluid (SBF). Both M and MF glasses and glass-ceramics showed high microhardness measurements and good antibacterial behavior. In vitro biodegradation was studied by using electrochemical corrosion behavior of the prepared glass- and glass-ceramic-coated Ti in SBF. The prepared coated Ti showed good corrosion resistance in SBF at 37 °C using potentiodynamic polarization technique, and the impedance data fitting explained the structure of the coating and the adsorption of SBF ions on the Ti surface. The MFGC provides the best corrosion-resistant coating, especially after sintering it.

36 MATERIALS SCIENCE↗

Laboratory Evaluation of a Natural Gas–Based Foamed Fracturing Fluid

Abstract Foams have been used as hydraulic fracturing fluids to reduce water usage and minimize the potentially deleterious impact on water-sensitive formations. Traditionally, carbon dioxide (CO2) and nitrogen (N2) have been used as the internal phase in these foamed fluids. Hydraulic fracturing with natural gas (NG) is a relatively inexpensive option, particularly if NG produced from the wellhead can be used without significant processing. In an ongoing program sponsored by the US Department of Energy (DOE), an alternative fracturing process is being developed that uses NG-based foam. Previously, the optimal thermodynamic pathway was identified to transform wellhead NG into pressurized NG suitable for use as the internal phase in a foamed fracturing fluid. Recent work has focused on preparing a NG-based foam at surface conditions typically encountered in hydraulic fracturing and measuring the stability and rheological properties of the foam. In addition, the transient response of the foam during fracture initiation was simulated using a fast-acting solenoid valve. A single base-fluid mixture was prepared by combining a commercially available viscosifier and foaming surfactant with water. The base fluid was then injected into a tee using a water pump. Simultaneously, liquefied natural gas (LNG) was pressurized using a cryogenic pump, vaporized using a heat exchanger, and injected into the tee to mix with the base fluid and generate foam. The foam then flowed through approximately 300 ft of 0.312-in. inside diameter (ID) tubing equipped with pressure transducers at several locations. The test fixture included a sight glass to visually inspect the quality of the foam. This paper reports on findings related to foam stability and rheology and compares these results to previous studies on foamed fracturing fluids.

Beck, Griffin↗

Dynamic response of shear thickening fluid under laser induced shock

The dynamic response of the 57 vol./vol. % dense spherical silica particle-polyethylene glycol suspension at high pressure was investigated through short pulsed laser induced shock experiments. The measured back free surface velocities by a photonic Doppler velocimetry showed that the shock and the particle velocities decreased while the shock wave transmitted in the shear thickening fluid (STF), from which an equation of state for the STF was obtained. In addition, the peak stress decreased and the absorbed energy increased rapidly with increasing the thickness for a thin layer of the STF, which should be attributed to the impact-jammed behavior through compression of particle matrix, the deformation or crack of the hard-sphere particles, and the volume compression of the particles and the polyethylene glycol.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Constitutive model fingerprints in medium-amplitude oscillatory shear

Rheologists have expectations for signatures of linear viscoelastic properties, such as shapes of G'(ω) and G"(ω). Medium amplitude (or asymptotically-nonlinear) oscillatory shear (MAOS) provides additional nonlinear rheological information with low dimensional, well-defined material functions. Here, we develop expectations of signatures (or fingerprints) for the four asymptotically-nonlinear material functions associated with MAOS, [e 1 ](ω), [e 3 ](ω), [v 1 ](ω), [v 3 ](ω). Although the linear fingerprints may be identical for different models, the asymptotically-nonlinear fingerprints may be different in magnitude, frequency-scaling, curve shapes, and sign changes. To perform the analysis, we collect/translate a library of available analytical strain-controlled MAOS fingerprints for seven different constitutive models. Using this library, we identify general trends and highlight key differences of asymptotic-nonlinear viscoelasticity. Asymptotic nonlinearities for all models considered here obey the terminal regime inter-relations and frequency scaling predicted by Bharadwaj and Ewoldt. Unlike the positive linear viscoelastic measures, at least one of the four asymptotic nonlinearities changes signs with Deborah number (De). Following sign interpretations of Ewoldt and Bharadwaj, we show that nonlinearities tend to be driven by strain-rates at small De, and by strains at large De, a trend observed for nearly all the constitutive models studied here, the exception being the model for dilute rigid dumbbell suspensions. Some constitutive models exhibit multiple sign changes at intermediate De and there may be no universal behavior of asymptotically-nonlinear fingerprints in this regime. Therefore, frequency-dependent signatures can be material-specific. Furthermore, this will allow inverse problems to infer structure, select models, and fit model parameters using asymptotically-nonlinear signatures. To illustrate this aspect, we demonstrate a fingerprint matching exercise with experimental measurements on a transiently cross-linked hydrogel system. We find that currently available model fingerprints can match the qualitative magnitudes and frequency dependence, but not the signs of the experimental transient network response.

42 ENGINEERING↗

In situ measurement of velocity-stress sensitivity using crosswell continuous active-source seismic monitoring

The ability to characterize time-varying reservoir properties, such as the state of stress, has fundamental implications in subsurface engineering, relevant to geologic sequestration of CO 2 . Stress variation, here in the form of changes in pore fluid pressure, is one factor known to affect seismic velocity. Induced variations in velocity have been used in seismic studies to determine and monitor changes in the stress state. Previous studies conducted to determine velocity-stress sensitivity at reservoir conditions rely primarily on laboratory measurements of core samples or theoretical relationships. In this paper, we have developed a novel field-scale experiment designed to study the in situ relationship between pore-fluid pressure and seismic velocity using a crosswell continuous active-source seismic monitoring (CASSM) system. At the Cranfield, Mississippi, CO 2 sequestration field site, we actively monitored seismic response for five days with a temporal resolution of 5 min; the target was a 26 m thick injection zone at approximately 3.2 km depth in a fluvial sandstone formation (lower Tuscaloosa Formation). The variation of pore fluid pressure was obtained during discrete events of fluid withdrawal from one of the two wells and monitored with downhole pressure sensors. The results indicate a correlation between decreasing CASSM time delay (i.e., velocity change for a raypath in the reservoir) and periods of reduced fluid pore pressure. The correlation is interpreted as the velocity-stress sensitivity measured in the reservoir. This observation is consistent with published laboratory studies documenting a velocity ( V ) increase with an effective stress increase. A traveltime change ( d t ) of 0.036 ms is measured as the consequence of a change in pressure of approximately 2.55 MPa ( d P e ). For T = 13 ms total traveltime, the velocity-stress sensitivity is d V / V / d P e = d t / T / d P e = 10.9 × 10 - 4 / MPa . Finally, the overall results suggest that CASSM measurements represent a valid technique for in situ determination of velocity-stress sensitivity in field-scale monitoring studies.

58 GEOSCIENCES↗

In-situ thermophysical measurement of flowing molten chloride salt using modulated photothermal radiometry

Molten salts are leading candidates for high-temperature heat transfer fluids (HTFs) for thermal energy storage and conversion systems in concentrated solar power (CSP) and nuclear energy power plants. The ability to probe molten salt thermal transport properties in both stationary and flowing status is important for the evaluation of their heat transfer performance under realistic operational conditions, including the temperature range and potential degradation due to corrosion and contamination. However, accurate thermal transport properties are usually challenging to obtain even for stagnant molten salts due to different sources of errors from convection, radiation, and corrosion, let alone at flowing status. To the best of authors’ knowledge, there is no available in-situ technique for measuring flowing molten salt thermal conductivity. Here, we report the first in-situ flowing molten salt thermal conductivity measurement using modulated photothermal radiometry (MPR). We could successfully perform the first in-situ thermal conductivity measurement of flowing molten NaCl-KCl-MgCl 2 in the typical operating temperature (520 and 580 °C) with flow velocities ranging from around 0.3 to 1.0 m s -1 . The relative change of the molten salt thermal conductivity was measured. Gnielinski’s correlation was also used to estimate the heat transfer coefficient h of the flowing NaCl-KCl-MgCl 2 in the given experimental condition. Furthermore, the work showed the potential of the MPR technique serving as an in-situ diagnostics tool to evaluate the heat transfer performance of flowing molten salts and other high-temperature HTFs.

14 SOLAR ENERGY↗

Turbulent mixing in a precessing sphere

By numerically simulating turbulent flows at high Reynolds numbers in a precessing sphere, we propose a method to enhance the mixing of a fluid confined within a smooth cavity by its rotational motion alone. To precisely evaluate the mixing efficiency, we extend the quantification method proposed by Danckwerts [“The definition and measurement of some characteristics of mixtures,” Appl. Sci. Res. A 3, 279–296 (1952)] to the case in which only a finite number of fluid particle trajectories can be known. Our accurate numerical tracking of fluid particles in the flow, which is controlled by the Reynolds number (an indicator of the spin rate) and the Poincaré number (the precession rate), shows the following results. First, the mixing process on the time scale normalized by the spin period is independent of the Reynolds number as long as it is high enough for the flow to be developed turbulence. Second, fastest mixing is achieved under weak precession (Poincaré number ≈0.1); in such cases, perfect mixing requires only 10–15 spins of the container. Third, the power to sustain turbulence is a weakly increasing function of the Poincaré number, and the energy efficiency of the mixing is also maximized when the Poincaré number is about 0.1. Fourth, efficient mixing driven by the weak precession arises from the effective cooperation of complex large-scale flow and small-scale turbulence, which itself is sustained by the large-scale flow.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Coherent Structures and Intermittency in Plasma Turbulence

The paper discusses some fundamental issues related to the phenomenon of intermittency in plasma turbulence with particular reference to experimental observations in fusion devices. Intermittency is typically associated with the presence of coherent structures in turbulence. Since coherent structures can play an important role in governing the transport properties of a system they have received a great deal of attention in fusion research. We review some of the experimental measurements and numerical simulation studies on the presence and formation of coherent structures in plasmas and discuss their relevance to intermittency. Intermittency, as widely discussed in the context of neutral fluid turbulence, implies multiscaling behaviour in contrast to self-similar scaling patterns observed in self organized criticality (SOC) phenomenon. The experimental evidence from plasma turbulence measurements reveal a mixed picture--while some observations support the SOC model description others indicate the presence of multiscaling behaviour. We discuss these results in the light of our present understanding of plasma turbulence and in terms of certain unique aspects of intermittency as revealed by fluid models of plasmas.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Numerical Prediction of Oscillation Behaviors of a Multiphase Core–Shell Droplet During Interfacial Tension Measurement

Interfacial tension between molten high-temperature materials is to be measured using the electrostatic levitation furnace (ELF) and the electromagnetic levitator (ISS-EML) aboard the International Space Station. A levitated compound droplet of a concentric core–shell structure is excited either by an impulsive electromagnetic field or by a superimposed electrostatic field. The oscillation behavior of the compound droplet is analyzed to measure interfacial tension at the interface of the two phases. In support of the space experiments, a computational fluid dynamic model was developed to characterize the oscillation behavior of multiphase core–shell droplet. The developed model predicted the interfacial tension between molten copper-rich and cobalt-rich phases with a difference of 3.3 pct compared to the values reported in literature. The developed model is being utilized to investigate the influence of various test parameters on measured surface tension and also being extended for molten steel–molten slag systems.

36 MATERIALS SCIENCE↗