Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “solid Earth”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 973 records · Page 54

Developing Lanthanide-Nitrate Cluster Chemistry toward Rare Earth Separations

Nitrate-decorated hexamers with a [Ln 6 (μ 6 -O)(μ 3 –OH) 8 ] 8+ core have been reported for nearly every lanthanide ion and are used as precursors for the assembly of functional metal–organic frameworks. Yet, few studies have examined the correlation between the solution and solid-state species, and the formation of mixed-metal clusters. Toward this end, a series of homo- and heterometal lanthanide nitrate hexamers was prepared via pH adjustment of aqueous lanthanide nitrate solutions. Examination of the homometallic europium solutions using Small Angle X-ray Scattering and nESI-MS showed that lower order complexes dominate lanthanide speciation in nitrate media. Yet, powder X-ray diffraction data of the precipitated phase confirmed the formation of [Ln 6 (μ 6 -O)(μ 3 -OH) 8 (NO 3 ) 6 (H 2 O) 12 ]·2(NO 3 )·n(H 2 O), Ln 6 , for Ln = Eu and Tb. For heterometal systems, analysis of the solid-state product by ICP–MS showed the selective incorporation of the heavier rare earths into Ln 6 . Selectivity was quantified by calculating an average separation factor, which is defined as the ratio of recovery factors of both metals. Further examination of the luminescence behavior of mixed metal [Tb 6–x Eu x (μ 6 -O)(μ 3 -OH) 8 (NO 3 ) 6 (H 2 O) 12 ]·2(NO 3 )·n(H 2 O), with x = 1.1–3.6, showed that the relative intensities of the peaks at 489 nm (terbium, 5 D 4 → 7 F 6 ) and 690 nm (europium, 5 D 0 → 7 F 4 ) trend with the percent incorporation of europium and terbium into the cluster.

anions↗

Thermal evolution and chemical differentiation of the terrestrial magma ocean

The release of gravitational energy resulted in global melting and formation of a magma ocean during accretion of the Earth. Although it is believed that the formation of the magma ocean resulted in gravitational differentiation of melt and solid, the differentiation might be disturbed by the following processes: (1) convective mixing; (2) cooling and solidification; and (3) growth of the earth, which results in secular increase of pressure, and stirring by planetesimal impacts. The purpose of this study is to investigate the differentiation processes of the terrestrial magma ocean by taking into account various disturbing processes.

Abe, Y.↗

Investigation about thermophysical properties of Ln{sub 2}Ce{sub 2}O{sub 7} (Ln = Sm, Er and Yb) oxides for thermal barrier coatings

Graphical abstract: Display Omitted Highlights: ► We successfully prepared three types of new rare earth cerium oxides. ► We measured their thermophysical properties. ► These new ceramics can be explored as candidate ceramics for thermal barrier coatings. -- Abstract: Three kinds of rare earth cerium oxides – Ln{sub 2}Ce{sub 2}O{sub 7} (Ln = Sm, Er and Yb) were prepared by solid state reaction method. Their phase compositions, microstructures and thermophysical properties were investigated. Results of X-ray diffraction reveal that pure Ln{sub 2}Ce{sub 2}O{sub 7} (Ln = Sm, Er and Yb) oxides with fluorite structure are successfully synthesized in the current research. Scanning electrical microscopy results show that their microstructures are dense and no other un-reacted oxides or inter-phases exist in the interfaces between grains. Their thermal expansion coefficients are higher than those of YSZ, while their thermal conductivities are lower than those of YSZ. The decreasing ionic radius from Sm{sup 3+} to Yb{sup 3+} results in the descending thermal expansion coefficients from Sm{sub 2}Ce{sub 2}O{sub 7} to Yb{sub 2}Ce{sub 2}O{sub 7}. The effective phonon scattering by atomic weight difference contributes to the decreasing thermal conductivities from Sm{sub 2}Ce{sub 2}O{sub 7} to Yb{sub 2}Ce{sub 2}O{sub 7}. These results imply that synthesized rare earth cerium oxides have potentials to be used as novel candidate materials for thermal barrier coatings in the future.

36 MATERIALS SCIENCE↗

Vibrational properties of the gallium monohydrides SrGaGeH, BaGaSiH, BaGaGeH, and BaGaSnH

Vibrational properties of the gallium monohydrides SrGaGeH, BaGaSiH, BaGaGeH, and BaGaSnH (AeGaTtH) have been investigated by means of inelastic neutron scattering (INS) and first principles calculations. The compounds contain separated Ga-H units being part of a two dimensional polyanionic layer, [TtGaH]{sup 2-} (Tt=Si, Ge, Sn). The INS spectra show internal Ga-H bending and stretching modes at frequencies around 900 and 1200 cm{sup -1}, respectively. While the stretching mode is virtually invariant with respect to the variable chemical environment of the Ga-H unit, the bending mode frequency varies and is highest for BaGaSiH and lowest for BaGaSnH. The stretching mode is a direct measure of the Ga-H bond strength, whereas the bending mode reflects indirectly the strength of alkaline earth metal-hydrogen interaction. Accordingly, the terminal Ga-H bond in solid state AeGaTtH is distinct, but-compared to molecular gallium hydrides-very weak. - Graphical abstract: Vibrational properties of the gallium monohydrides SrGaGeH, BaGaSiH, BaGaGeH, and BaGaSnH have been investigated and revealed Ga-H stretching mode frequencies around 1200 cm{sup -1}. This implies that the terminal Ga-H bond in solid state polyanionic gallium hydrides is very weak compared to molecular gallium hydride species.

36 MATERIALS SCIENCE↗

Water Ice and Life's Roots in Space

Nearly three decades ago as Voyager 2 spacecraft raced out of the Solar System. NASA engineers turned its camera arm around (at the request of the American astronomer Carl Sagan) to take a parting snapshot of Earth. Earth's image was a single pale blue pixel, its color caused by the Rayleigh scattering of sunlight in the water of our oceans. Earth is a water planet, and this is the color of life. No matter how far we travel on our planet, no matter how high or deep, if we find liquid water, we find some form of life that manages to survive there. And yet there is a cruel irony. Water in its solid crystalline form is hostile to life. Organisms can roost in geysers, wallow in brine and gulp down acid, but they cowered from ice. The rigid ordering of water molecules in ice crystals expels impurities and tears organic tissue beyond repair. In fact, about the only good thing you can say about ice is that it gets out of the way: Its low density ensures that it floats and leaves the water dwelling creatures in peace. Recent discoveries have caused us to rethink this basic premise. New lines of evidence both observational and experimental - suggest that prebiotic organic compounds are not only comfortable in, but in fact had their origin in a peculiar form of solid water ice that is ubiquitous in interstellar space, but completely absent from Earth. Only recently have we been able to create even submicroscopic quantities of this ice in terrestrial laboratories, yet it constitutes the most abundant form of water in the universe. Interstellar ice is a far cry from the ice we are so familiar with on Earth. This interstellar ice has no crystalline structure, and despite the fact that its temperature is a scant few degrees above absolute zero (where all molecular motion ceases), it is highly reactive and can flow like water when exposed to radiation. It is in fact this ice's similarity to liquid water that allows it to participate in the creation of the very first organic compounds.

Blake, David↗

Application of Colorimetric Solid Phase Extraction (C-SPE) to Monitoring Nickel(II) and Lead(II) in Spacecraft Water Supplies

Archived water samples collected on the International Space Station (ISS) and returned to Earth for analysis have, in a few instances, contained trace levels of heavy metals. Building on our previous advances using Colorimetric Solid Phase Extraction (C-SPE) as a biocide monitoring technique, we are devising methods for the low level monitoring of nickel(II), lead(II) and other heavy metals. C-SPE is a sorption-spectrophotometric platform based on the extraction of analytes onto a membrane impregnated with a colorimetric reagent that are then quantified on the surface of the membrane using a diffuse reflectance spectrophotometer. Along these lines, we have determined nickel(II) via complexation with dimethylglyoxime (DMG) and begun to examine the analysis of lead(II) by its reaction with 2,5- dimercapto-1,3,4-thiadiazole (DMTD) and 4-(2- pyridylazo)-resorcinol (PAR). These developments are also extending a new variant of C-SPE in which immobilized reagents are being incorporated into this methodology in order to optimize sample reaction conditions and to introduce the colorimetric reagent. This paper describes the status of our development of these two new methods.

Diaz, Neil C.↗

Neutron powder diffraction, and solid-state deuterium NMR analyses of Yb{sub 2}RuD{sub 6} and spectroscopic vibrational analysis of Yb{sub 2}RuD{sub 6} and Yb{sub 2}RuH{sub 6}

The crystal structure of Yb{sub 2}RuD{sub 6} has been determined by neutron powder diffraction and the results were consistent with the Fm3m (no. 225) space group, a=7.2352(18) A, with the atoms arranged according to the well-known K{sub 2}PtCl{sub 6} structure. No structural phase transition was observed in going from room temperature to 4 K. Raman spectra were not available due to fluorescence, but all fundamental bands and combination bands were assigned from FTIR and PAIR spectra only following previous studies for other alkaline earth and europium ruthenium ternary metal hydrides and deuterides. The deuterium nuclear quadrupole coupling constant, 40.9 kHz, leads to an ionic character of the Ru-D bond of 82%. - Graphical Abstract: Using PAIR (see figure above) and FTIR data spectroscopic vibrational assignments are reported for (a) Yb{sub 2}RuH{sub 6} and (b) Yb{sub 2}RuD{sub 6}. In addition, neutron powder diffraction structural elucidation data and deuterium NMR data are reported for Yb{sub 2}RuD{sub 6}. Highlights: > Yb{sub 2}RuD{sub 6} was prepared by a high temperature gas/solid phase reaction among YbD{sub 2}, Ru and D{sub 2}. > The crystal structure of Yb{sub 2}RuD{sub 6} was elucidated by powder neutron diffraction. > Yb{sub 2}RuD{sub 6} and Yb{sub 2}RuH{sub 6} were analyzed by infrared spectroscopy. > In addition, Yb{sub 2}RuD{sub 6} was analyzed with D NMR spectroscopy.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Continuous recovery of phosphoric acid and Rare-Earths containing particles from phosphoric acid sludge using a decanter centrifuge

Recovery of rare earth elements (REEs) from various industrial and natural streams currently draws significant attention in efforts to meet the demands of the manufacturing industry. Among many industrial byproducts and waste streams, phosphoric acid sludge could be one of the most economically feasible resources for the recovery of REEs because solid particles in the sludge contain relatively concentrated REEs, up to 3,000 ppm, while the liquid component of the sludge is valuable phosphoric acid (P 2 O 5 ) that can be recovered and returned to the main product. Due to high viscosity and large solids content (e.g., 30–40 %), however, this byproduct stream requires multistep separation and purification processes. In this study, a single-step process involving a continuous-flow decanter centrifuge (CFDC) was employed to investigate its feasibility for continuous solid/liquid separation from real phosphoric acid sludge. High centrifugal forces generated from up to 1500 G gravity acceleration separate solid particles from the sludge, generating a liquid-rich stream and a solids-rich stream at the exit of the CFDC. A single pass of phosphoric-acid sludge through the CFDC yielded 95 % liquid recovery and 90 % recovery of REEs-containing solids from 20 to 34 wt% solids-containing sludge. Finally, a reduced order model developed for the CFDC operation showed good agreement with experimental data, and preliminary technoeconomic analysis revealed potential process feasibility.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The Materials Chemistry of Atomic Oxygen with Applications to Anisotropic Etching of Submicron Structures in Microelectronics and the Surface Chemistry Engineering of Porous Solids

Neutral atomic oxygen is the most abundant component of the ionospheric plasma in the low Earth orbit environment (LEO; 200 to 700 kilometers altitude) and can produce significant degradation of some spacecraft materials. In order to produce a more complete understanding of the materials chemistry of atomic oxygen, the chemistry and physics of O-atom interactions with materials were determined in three radically different environments: (1) The Space Shuttle cargo bay in low Earth orbit (the EOIM-3 space flight experiment), (2) a high-velocity neutral atom beam system (HVAB) at Los Alamos National Laboratory (LANL), and (3) a microwave-plasma flowing-discharge system at JSC. The Space Shuttle and the high velocity atom beam systems produce atom-surface collision energies ranging from 0.1 to 7 eV (hyperthermal atoms) under high-vacuum conditions, while the flowing discharge system produces a 0.065 eV surface collision energy at a total pressure of 2 Torr. Data obtained in the three different O-atom environments referred to above show that the rate of O-atom reaction with polymeric materials is strongly dependent on atom kinetic energy, obeying a reactive scattering law which suggests that atom kinetic energy is directly available for overcoming activation barriers in the reaction. General relationships between polymer reactivity with O atoms and polymer composition and molecular structure have been determined. In addition, vacuum ultraviolet photochemical effects have been shown to dominate the reaction of O atoms with fluorocarbon polymers. Finally, studies of the materials chemistry of O atoms have produced results which may be of interest to technologists outside the aerospace industry. Atomic oxygen 'spin-off' or 'dual use' technologies in the areas of anisotropic etching in microelectronic materials and device processing, as well as surface chemistry engineering of porous solid materials are described.

Koontz, Steve L.↗

Hybrid Iodide Perovskites of Divalent Alkaline Earth and Lanthanide Elements

Hybrid halide perovskites AM II X 3 (A = ammonium cation, M II = divalent cation, X = Cl, Br, I) have been extensively studied but have only previously been reported for the divalent carbon group elements Ge, Sn, and Pb. While they have displayed an impressive range of optoelectronic properties, the instability of Ge II and Sn II and the toxicity of Pb have stimulated significant interest in finding alternatives to these carbon group-based perovskites. Here, we describe the low-temperature solid-state synthesis of five new hybrid iodide perovskites centered around divalent alkaline earth and lanthanide elements, with the general formula AM II I 3 (A = methylammonium, MA; M II = Sr, Sm, Eu, and A = formamidinium, FA; M II = Sr, Eu). Structural, calorimetric, optical, photoluminescence, and magnetic properties of these materials are reported.

36 MATERIALS SCIENCE↗

Alternative Solid‐State Synthesis Route for Highly Fluorinated Disordered Rock‐Salt Cathode Materials for High‐Energy Lithium‐Ion Batteries

Abstract Fluorination has been identified as a key element for enabling the stable cycling of earth‐abundant manganese‐based disordered rock salt (DRX) cathodes. However, fluorination in the DRX bulk remains a challenge for scalable solid‐state synthesis. In this study, a tailored reaction pathway is proposed to synthesize a highly fluorinated DRX. It is demonstrated for the first time that the unconventional precursors, Li 6 MnO 4 , MnF 2 , and TiO 2 , can avoid the formation of Mn‐based intermediates (such as Li 2 (Mn,Ti)O 3, LiMnO 2 , and Mn 3 O 4 ), which, once formed, persist until the synthesis temperature reaches close to or above that required for fluorine volatility. Therefore, this method can form a highly fluorinated DRX with a composition of Li 1.23 Mn 0.40 Ti 0.37 O 2−y F y ( y = 0.29–0.34) at a low temperature (800 °C) relative to that required for conventional DRX solid‐state reactions (≥900 °C). Li 1.23 Mn 0.40 Ti 0.37 O 2−y F y ( y = 0.29–0.34) delivers a specific capacity above 300 mAh g −1 and a specific energy of 980 Wh kg −1 at 30 °C. Detailed characterization reveals that this DRX phase reversibly utilizes Mn 2+/3+ redox in the low‐voltage region and Mn 3+/4+ redox in the middle‐voltage range, whereas reversible oxygen redox is observed at high potentials.

Avvaru, Venkata Sai↗

Optical properties of solid and liquid sulfur at visible and infrared wavelengths

The real part of the refractive index of liquid sulfur and solid orthorhombic sulfur was measured in the 0.4-2.0 micron range, with reference to applications to Venus, Jupiter, Amalthea, Io, and the earth. The imaginary part of the refractive index of liquid sulfur was also measured, and the reflectance of semiinfinite slabs of solid and liquid sulfur was calculated on the basis of the measured values of the real and imaginary parts of the refractive index. The conclusion that liquid sulfur melts on Io would be classified as 'black' by the Voyager spectrophotometric analysis is confirmed.

Sasson, R.↗

Conditions during formation of the Earth

The formation of the Earth starts with gravitational instabilities in the gas of primitive solar nebula, which form giant gaseous protoplanets. The envelopes of these are thermally evaporated, but solids can gravitationally settle to the center of the protoplanets, and most of the core and mantle of the Earth were formed at that time (age about 10,000 years). The protoearth then survived a period of high temperatures in the surrounding gas (age about 10 to the 5th years). While and after the gas was thermally stabilized and removed from the solar system, the Earth grew by bombardment of planetesimals and its early atmosphere was established. A late major collision led to formation of the Moon and loss of the primordial atmosphere (age about 10 to the 8th years). The present atmosphere resulted from still later accretion. The presence of this atmosphere spreads out the mantle cooling and solidification over hundreds of millions of years.

Cameron, A. G. W.↗

Structural modification and photoluminescence studies of Eu in lamellar fluorphlogopite by the adjustment of layer charge

Highlights: • The structure of fluorphlogopite was modified by the decrease of layer charge. • Characteristic emission of Eu{sup 3+} was greatly enhanced as doped to the modified clay. • The emitting color changed from orange-red to red in respect to the original host. • This is a new strategy to enhance the luminescence of inorganic layered materials. - Abstract: In this paper, the lamellar fluorphlogopite was structurally modified by the adjustment of layer charge and the rare earth Eu{sup 3+} was doped to fluorphlogopite with a subsequent high temperature solid state reaction process. The structural modification involved a preliminary treatment of fluorphlogopite with HNO{sub 3} and oxalic acid to reduce the layer charge density, and part of the charge-reduced fluorphlogopite was converted to a homoionic Na form by ion exchange with NaCl or NaB(C{sub 6}H{sub 5}){sub 4}. It has been noticed that the interlayer spacing of modified fluorphlogopite is decreased as compared with the original fluorphlogopite due to the ionic radius difference between K{sup +} and Na{sup +}. The photoluminescence study suggests that adjustment of layer charge of fluorphlogopite is beneficial to enhance the luminescence intensity excited with near UV light, and the layered system may be a potential red light component for the use of solid-state lighting and other optoelectronic fields.

36 MATERIALS SCIENCE↗

Separation of Radionuclides from a Rare Earth-Containing Solution by Zeolite Adsorption

The increasing industrial demand for rare earths requires new or alternative sources to be found. Within this context, there have been studies validating the technical feasibility of coal and coal byproducts as alternative sources for rare earth elements. Nonetheless, radioactive materials, such as thorium and uranium, are frequently seen in the rare earths’ mineralization, and causes environmental and health concerns. Consequently, there exists an urgent need to remove these radionuclides in order to produce high purity rare earths to diversify the supply chain, as well as maintain an environmentally-favorable extraction process for the surroundings. In this study, an experimental design was generated to examine the effect of zeolite particle size, feed solution pH, zeolite amount, and contact time of solid and aqueous phases on the removal of thorium and uranium from the solution. The best separation performance was achieved using 2.50 g of 12-µm zeolite sample at a pH value of 3 with a contact time of 2 h. Under these conditions, the adsorption recovery of rare earths, thorium, and uranium into the solid phase was found to be 20.43 wt%, 99.20 wt%, and 89.60 wt%, respectively. The Freundlich adsorption isotherm was determined to be the best-fit model, and the adsorption mechanism of rare earths and thorium was identified as multilayer physisorption. Further, the separation efficiency was assessed using the response surface methodology based on the development of a statistically significant model.

58 GEOSCIENCES↗

Bombardment History of the Moon: What We Think We Know and What We Don't Know

The absolute impace history of the moon and inner solar system can in principle be derived from the statistics of radiometric ages of shock-heated planetary samples (lunar or meteoritic), from the formation ages of specific impact craters on the moon or Earth; and from agedating samples representing geologic surface units on the moon (or Mars) for which crater densities have been determined. This impact history, however, is still poorly defined. The heavily cratered surface of the moon is a testimony to the importance of impact events in the evolution of terrestrial planets and satellites. Lunar impacts range in scale from an early intense flux of large objects that defined the surface geology of the moon, down to recent, smaller impacts that continually generate and rework the lunar regolith. Densities of larger craters on lunar surface units of dated age define a projectile flux over time that serves as the basis for estimating surface ages on other solid bodies, particularly Mars. The lunar cratering history may address aspects of Earth s evolution, such as the possible role of early intense impacts on the atmosphere and early life and possible periodicity in large impact events in the more recent past. But, much about the lunar impact history remains unknown.. On Earth approximately 172 impact craters up to ~300 km in diameter and up to ~2 Gyr in age are recognized. Although these data suggest greater relative numbers of younger craters, possibly suggesting a recent increase in projectile flux, both the diameters and especially the ages of most terrestrial crates are so poorly known that the differential terrestrial impact flux over time is uncertain. For the moon, densities of craters on some mare surfaces and crater ejecta deposits, for which we have measured or estimated formation ages, suggest an approximately constant lunar impact rate of larger projectiles over the past ~3.5 Gyr. However, the data are cumulative in nature and limited. Questions exist as to how accurately dated samples correlate with surfaces having measured crater densities. Studies of ages of many tiny impact-melt beads from Apollos 12 and 14 soils show a decrease in the number of beads with age from ~4 Gyr ago to ~0.4 Gyr ago, followed by a significant increase in beads with age <0.4 Gyr (2). These authors concluded that the projectile flux had decreased over time, followed by a significant flux increase more recently.

Bogard, Donald↗

A possible mechanism for the capture of microparticles by the earth and other planets of the solar system

By application of Lyttleton's theory for the formation of comets, it is shown that a possible mechanism for the origin and formation of a concentration of cosmic particles around the earth and the other planets of the solar system exists. In the vicinity of the neutral point, where the velocity of colliding particles is not greater than 6 km/s, it is found that if the solid particles after collision must remain in a solid state, there can be no possibility of accretion for Mercury, Mars, and the Moon, where the maximum value of the distance of the center of the planet to the asymptotic trajectory is less than the radius of the planet. On the other hand, the capture radii of microparticles in solid form varies from a minimum of 2.95 planetary radii for Venus and 3.47 for the Earth, to about 986 for Jupiter.

Dibenedetto, F.↗

Mining Unexplored Chemistries for Phosphors for High-Color-Quality White-Light-Emitting Diodes

There is a critical need for new earth-abundant phosphors to enable next-generation, highly efficient solid-state lighting. Here we report the discovery of Sr 2 LiAlO 4 , the first known Sr-Li-Al-O quaternary crystal, via a carefully targeted data-driven structure prediction and screening effort using density functional theory calculations. Sr 2 LiAlO 4 is predicted and experimentally confirmed to be a thermodynamically and thermally stable phosphor host that can be excited with near-UV/blue sources. The Eu 2+ - and Ce 3+ -activated Sr 2 LiAlO 4 phosphors exhibit broad emissions at λ max ~ 512 nm (green-yellow) and λ max ~ 434 nm (blue), respectively, with excellent thermal quenching resistance of >88% intensity at 150°C. A prototype phosphor-converted white LED utilizing Sr 2 LiAlO 4 -based phosphors yields an excellent color-rendering index exceeding 90. Sr 2 LiAlO 4 therefore exhibits great potential for industrial applications in low-cost, high-color-quality WLEDs.

Wang, Zhenbin↗