Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “linearization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 973 records · Page 54
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

CBETA: The first multi-pass superconducting linear accelerator with energy recovery

Energy recovery has been achieved in a multipass linear accelerator, demonstrating a technology for more compact particle accelerators operating at higher currents and reduced energy consumption. Energy delivered to the beam during the first four passes through the accelerating structure was recovered during four subsequent decelerating passes. High-energy efficiency was achieved by the use of superconducting accelerating cavities and permanent magnets. The fixed-field alternating-gradient optical system used for the return loop successfully transported electron bunches of 42, 78, 114, and 150 MeV in a common vacuum chamber. This new kind of accelerator, an eight-pass energy recovery linac, has the potential to accelerate much higher current than existing linear accelerators while maintaining small beam dimensions and consuming much less energy per electron.

43 PARTICLE ACCELERATORS↗
DOE OSTI2018

Linearly aligned single-chiral vortices in hexagonal manganites by in situ electric arc heating

Nanoscale topological defects, such as vortices and skyrmions in ferroic systems, have been intensively investigated due to their intriguing properties and behaviors. In addition to harnessing and tuning their functionalities, spatial manipulation and control of topological defects as functional elements are important for future nanotechnologies. Here in this paper, we report a linear alignment behavior of single-chiral vortices observed in thin transmission electron microscopy samples of multiferroic hexagonal manganites during an in situ heating experiment. In order to avoid chemical degradation during high-temperature heating in vacuum, we have utilized a rapid heating and quenching by in situ electric arcing. Using atomic resolution electron microscopy and phase-field simulation, we found that vortices and antivortices formed near the phase transition temperature are pulled out in the opposite directions by mechanical strain to leave single-chiral vortices linearly aligned along an isothermal line formed during quenching. In conclusion, Oour study provides important insight into spatial manipulation of the topological defects in oxide multiferroics by investigating far-equilibrium dynamics of symmetry-breaking continuous phase transitions.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2025

Memristive linear algebra

The advent of memristive devices offers a promising avenue for efficient and scalable analog computing, particularly for linear algebra operations essential in various scientific and engineering applications. This paper investigates the potential of memristive crossbars in implementing matrix inversion algorithms. We explore both static and dynamic approaches, emphasizing the advantages of analog and in-memory computing for matrix operations beyond multiplication. In particular, we demonstrate that the electrical properties of memristive crossbars uniquely suit them for the evolution of a family of matrix exponentials, which can be exploited for the efficient computation of matrix inverses and online solutions for linear problems. Our results demonstrate that memristive arrays can reduce computational complexity. We also study power consumption and show a tradeoff between precision and energy. Furthermore, we address the challenges of device variability, precision, and scalability, providing insights into the practical implementation of these algorithms.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2020

Analyzer-free linear dichroic ptychography

Linear dichroism is an important tool to characterize the transmission matrix and determine the crystal or orbital orientation in a material. To achieve high-resolution mapping of transmission properties, we introduce the linear-dichroism scattering model in ptychographic imaging and develop an efficient two-stage reconstruction algorithm. Using the proposed algorithm on a uniaxial material, the dichroic transmission matrix can be recovered without an analyzer by using ptychography measurements with as few as three different polarization angles, with the help of an empty region to remove phase ambiguities.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2025

Adaptive Linear State Estimation for Unbalanced Distribution System

The inclusion of PMU functionality in distribution relays enables the implementation of a linear state estimator (LSE) in Distribution Systems (DS). However, the unbalanced topology and phase coupling in distribution lines necessitate modifications to the LSE formulation. Additionally, the higher fault frequency in distribution systems requires a state estimation approach that is resilient to contingencies. This work proposes an adaptive linear state estimation algorithm tailored for unbalanced distribution systems with single-phase and two-phase laterals. Furthermore, a modified Optimal PMU Placement (OPP) strategy is introduced to ensure full observability in distribution systems with single-phase and two-phase buses. To maintain adaptability to topology changes, the state estimator incorporates circuit breaker status data provided by PMUs, ensuring robust performance during topology changes triggered by faults. The performance of the algorithm is verified on the IEEE 13-bus, 34-bus, and 123-bus systems.

PMUs↗
DOE OSTI2017

Scaling Up Data-Parallel Analytics Platforms: Linear Algebraic Operation Cases

Linear algebraic operations such as matrix manipulations form the kernel of many machine learning and other crucial algorithms. Scaling up as well as scaling out such algorithms are key to supporting large scale data analysis that require efficient processing over millions of data samples. To this end, we present, ARION, a hardware acceleration based approach for scaling-up individual tasks of Spark, a popular data-parallel analytics platform. We support both linear algebraic operations of between two dense matrices, and between sparse and dense matrices in distributed environments. ARION provides a flexible control of acceleration according to matrix density, along with efficient scheduling based on runtime resource utilization. We demonstrate the benefit of our approach for general matrix multiplication operations over large matrices with up to four billion elements by using Gramian matrix computation that is commonly used in machine learning. Experiments show that our approach achieves more than 2× and 1.5× end-to-end performance speedups for dense and sparse matrices, respectively, and up to 57.04× faster computation compared to MLlib, a state of the art Spark-based implementation. This work is sponsored in part by the NSF under the grants: CNS-1565314, CNS-1405697, and CNS-1615411. The manuscript has been authored by UT-Battelle, LLC under Contract No. DE-AC05-00OR22725 with the U.S. Department of Energy. The United States Government retains and the publisher, by accepting the article for publication, acknowledges that the United States Government retains a non-exclusive, paid-up, irrevocable, world-wide license to publish or reproduce the published form of this manuscript, or allow others to do so, for United States Government purposes. The Department of Energy will provide public access to these results of federally sponsored research in accordance with the DOE Public Access Plan (http://energy.gov/downloads/doe-public-access-plan). This research used resources of the Oak Ridge Leadership Computing Facility at the Oak Ridge National Laboratory, which is supported by the Office of Science of the U.S. Department of Energy under Contract No. DE-AC05-00OR22725.

Xu, Luna↗
DOE OSTI2017

TeaLeaf: A Mini-Application to Enable Design-Space Explorations for Iterative Sparse Linear Solvers

Iterative sparse linear solvers are an important class of algorithm in high performance computing, and form a crucial component of many scientific codes. As intra and inter node parallelism continues to increase rapidly, the design of new, scalable solvers which can target next generation architectures becomes increasingly important. In this work we present TeaLeaf, a recent mini-app constructed to explore design space choices for highly scalable solvers. We then use TeaLeaf to compare the standard CG algorithm with a Chebyshev Polynomially Preconditioned Conjugate Gradient (CPPCG) iterative sparse linear solver. CPPCG is a communication-avoiding algorithm, requiring less global communication than previous approaches. TeaLeaf includes support for many-core processors, such as GPUs and Xeon Phi, and we include strong-scaling results across a range of world-leading Petascale supercomputers, including Titan and Piz Daint.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2023

THz and Mid-Infrared Linear Dichroism in the High Tc Superconductor La2-xSrxCuO4

We measure the rotation of the linear polarization of light that is transmitted through a high Tc superconductor film as a function of sample orientation. We observe a linear dichroism signal over the entire probing range from 2 to 230 meV, which is consistent with anisotropic in-plane conductivity. The La2- xSrxCuO4 thin film sample is epitaxially constrained to be tetragonal, so the symmetry breaking is purely electronic.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2020

Comparison of Linear and Rotary Electric Machine Topologies for a Hybrid Hydraulic Electric Architecture of Off-Highway Vehicles

Electrification of off-highway vehicles offers the benefits of improved energy efficiency, enhanced controllability, and reduction in greenhouse gas emissions. However, progress towards electrification has been limited by the low power density of electric components compared to hydraulic components. A recently proposed hybrid hydraulic electric vehicle architecture provides a potential solution to these power density challenges by minimizing the required power rating of the electric components. This paper investigates the optimal design of linear and rotary electric machines for this new system architecture. Key performance metrics are identified for the electric machine, several variants of electric machines are analytically sized and compared for two different power levels, and an FEA-assisted design optimization is performed on promising candidates. Based on the optimization results, it is shown that an axial flux rotary machine is most suitable for implements requiring high power ratings, while the linear machine's form factor makes it a compelling candidate for lower power implements.

42 ENGINEERING↗
DOE OSTI2021

Iterative Linearization for Phasor-Defined Optimal Power Dispatch

Optimal power flow (OPF) problems, which dispatch power targets to controllable generating units across a network, must generally account for non-convex constraints on power flow. Furthermore, adapting those problems so as to make them solvable with convex optimization techniques is an area of much academic and operational interest. In this paper, we present a method for solving OPF as a quadratic program by iteratively refining and re-initializing a linearized model of power flow based on the outputs of an associated nonlinear solver. The linear model on which we demonstrate this method is an adapted version of an approximation designed for use with unbalanced distribution networks. As an important benefit, the model allows for the explicit inclusion of nodal voltage phasor values in both the OPF problem's objective and its constraints, which opens the door to the idea of phasor-based control (PBC) design. We show in simulations on the IEEE 13-node test feeder that our method quickly converges to a set of phasor targets that are sufficiently precise for use in operations at the distribution level.

24 POWER TRANSMISSION AND DISTRIBUTION↗
DOE OSTI2025

Linear Solver for Electromagnetic Simulation of General Distribution Feeders

High-fidelity electromagnetic transient (EMT) modeling is required for accurate simulation and analysis of power system dynamics in modern distribution feeders. However, the high-fidelity of EMT models often leads to significant computational challenges, particularly in terms of computational resources and simulation time. This paper investigates the development and application of a detailed EMT model for general distribution feeders, with a focus on improving computational efficiency. A direct linear solver is proposed for a bordered block diagonal (BBD) matrix structure commonly encountered in a EMT model of distribution feeders. The solver integrates the Schur complement method with the block tridiagonal matrix algorithm to enhance the computational performance. The proposed solver is validated using the primary feeder of the IEEE 342-node test system, demonstrating its accuracy and efficiency in EMT simulations. Furthermore, the solver’s performance is benchmarked against MATLAB’s built-in linear solvers, showing significant improvements in computation time while maintaining high fidelity and accuracy in simulation results.

Choi, Jongchan [ORNL] (ORCID:000000025952455X)↗
DOE OSTI2023

Comparison of Multi-Scale Nonlinear and Conventional Linear Methods for Stress Analysis of Nb 3 Sn Superconducting Magnets

Here this is an extension of the work on a multi-scale nonlinear procedure that demonstrated how to conduct nonlinear stress analysis of Nb 3 Sn superconducting accelerator magnets. The nonlinear procedure uses measured stress-strain curves of annealed copper, Nb 3 Sn strands and coil samples as inputs, which reduces the number of assumptions made for material properties—key uncertainties of any engineering analysis. The results from nonlinear analysis, semi-nonlinear analysis, and linear analysis of the same QFFB2 Nb 3 Sn quadrupole magnet under the same temperature and loads, were compared and discussed. The comparison illustrates that nonlinear stress analysis is significantly more accurate than other methods. As the superconducting coil block is a complex, composite material, it would be inadequate to assume the whole coil block to be linear, either isotropic or orthotropic. It is imperative to conduct nonlinear analysis by simulating the superconducting coil to the level of detail of the individual cables and individual strands. The nonlinear stress analysis procedure can be used to simulate not only Nb 3 Sn magnets, but also NbTi and HTS magnets.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2024

Losing Control of Your Linear Network? Try Resilience Theory

Resilience of cyber-physical networks to unexpected failures is a critical need widely recognized across domains. For instance, power grids, telecommunication networks, transportation infrastructures, and water treatment systems have all been subject to disruptive malfunctions and catastrophic cyberattacks. Following such adverse events, we investigate scenarios where a node of a linear network suffers a loss of control authority over some of its actuators. These actuators are not following the controller's commands and are instead producing undesirable outputs. The repercussions of such a loss of control can propagate and destabilize the whole network despite the malfunction occurring at a single node. To assess system vulnerability, we establish resilience conditions for networks with a subsystem enduring a loss of control authority over some of its actuators. Furthermore, we quantify the destabilizing impact on the overall network when such a malfunction perturbs a nonresilient subsystem. We illustrate our resilience conditions on two academic examples, on an islanded microgrid and on the linearized IEEE 39-bus system.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2018

Symmetric Indefinite Linear Solver Using OpenMP Task on Multicore Architectures

Recently, the Open Multi-Processing (OpenMP) standard has incorporated task-based programming, where a function call with input and output data is treated as a task. At run time, OpenMP's superscalar scheduler tracks the data dependencies among the tasks and executes the tasks as their dependencies are resolved. On a shared-memory architecture with multiple cores, the independent tasks are executed on different cores in parallel, thereby enabling parallel execution of a seemingly sequential code. With the emergence of many-core architectures, this type of programming paradigm is gaining attention-not only because of its simplicity, but also because it breaks the artificial synchronization points of the program and improves its thread-level parallelization. In this paper, we use these new OpenMP features to develop a portable high-performance implementation of a dense symmetric indefinite linear solver. Obtaining high performance from this kind of solver is a challenge because the symmetric pivoting, which is required to maintain numerical stability, leads to data dependencies that prevent us from using some common performance-improving techniques. To fully utilize a large number of cores through tasking, while conforming to the OpenMP standard, we describe several techniques. Our performance results on current many-core architectures-including Intel's Broadwell, Intel's Knights Landing, IBM's Power8, and Arm's ARMv8-demonstrate the portable and superior performance of our implementation compared with the Linear Algebra PACKage (LAPACK). The resulting solver is now available as a part of the PLASMA software package.

Computer Science↗
DOE OSTI2024

Conditional Sixth-Harmonic Injection to Improve the Linear Modulation Range of Three-Phase Voltage-Source Converters

Overmodulation techniques are used to improve dc bus voltage utilization for three-phase voltage-source converters (VSCs), resulting in significant reduction in fundamental voltage gain. Conventional pulse width modulation (PWM) techniques for three-phase VSCs cannot enhance the linear range of dc bus utilization by more than 15.5%. Here, in this letter, a conditional sixth-harmonic injection technique is introduced, which can theoretically improve the linear modulation range by up to 19.2% for three-phase ac systems without additional hardware components. Experimental validation of the proposed scheme is presented, with its performance compared against the conventional third-harmonic PWM technique.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2019

Linearized Coulomb Collision Operator for Simulation of Interpenetrating Plasma Streams

We present an extension of a linearized Coulomb collision operator, previously used in several Eulerian kinetic codes for like-species collisions and unlike-species collisions in the case where the backgrounds about which the linearization is made all are in collisional equilibrium, to the situation of interpenetrating plasma streams. In the latter case, the backgrounds can not be taken to be in equilibrium and a significant generalization is required. Our development is targeted towards the Eulerian kinetic plasma code LOKI, which evolves the Vlasov- Poisson or Vlasov-Maxwell system in a Cartesian “2+2-dimensional” phase space. The extended operator has been implemented in a test code, and results of both quantitative verification and qualitative “realizability” tests are presented.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2024

Research and Development to Reduce Impurity Production and Transport of the Impurities to the Target in Linear Plasma Devices Using Helicon Plasma Sources

Linear plasma devices used to test plasma facing materials (PFMs) and components for fusion reactors are often suffering under the production of intrinsic impurities from the plasma source system. Most linear plasma devices use internal electrodes (hollow cathodes, reflex arc, or cascading arc), which typically are the source of the main impurities. The next-generation plasma generators use radio frequency (RF) plasma sources like helicons to avoid internal electrodes. However, high power operation of helicons has proven to result in impurity production due to the high rectified sheath voltages created. Depending on the plasma parameters and magnetic configuration, these impurities can be transported to the target and deposited there to unacceptable high levels. Here, in this contribution, the experimental results from Proto-MPEX are summarized, and the conclusions of the impurity source physics are given. Methods to reduce the impurity production, the impurity transport, and the net deposition on the target are presented. These methods to reduce the impurity production include Faraday screens to reduce the sheath voltage drop, high-Z refractory coatings to reduce the erosion yield, and wall conditioning methods. Methods to reduce the impurity transport include changes in the magnetic configuration as well as electron heating to change axial and radial temperature profiles. Preliminary results on the effectiveness of some of these methods are presented.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2017

Sealing glass-ceramics with near-linear thermal strain, part III: Stress modeling of strain and strain rate matched glass-ceramic to metal seals

Thermal mechanical stresses of glass-ceramic to stainless steel (GCtSS) seals are analyzed using finite element modeling over a temperature cycle from a set temperature (T set ) 500°C to -55°C, and then back to 600°C. There are two glass-ceramics that have an identical coefficient of thermal expansion (CTE) at ~16 ppm/°C but have very different linearity of thermal strains, designated as near-linear NL16 and step-like SL16, and were formed from the same parent glass using different crystallization processes. Stress modeling reveals much higher plastic strain in the stainless steel using SL16 glass-ceramic when the GCtSS seal cools from T set . Upon heating tensile stresses start to develop at the GC-SS interface before the temperature reaches T set . On the other hand, the much lower plastic deformation in stainless steel accumulated during cooling using NL16 glass-ceramic allows for radially compressive stress at the GC-SS interface to remain present when the seal is heated back to T set . Finally, the qualitative stress comparison suggests that with a better match of thermal strain rate to that of stainless steel, the NL16 glass-ceramic not only improves the hermeticity of the GCtSS seals, but would also improve the reliability of the seals exposed to high-temperature and/or high-pressure abnormal environments.

36 MATERIALS SCIENCE↗