SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
The authors present a novel method called time-varying transfer function estimation (TTFE) in which time-domain parameters are computed through identification in the frequency domain. The method is particularly well suited for flexible structure control problems. An example of a flexible manipulator system is presented for which a self-tuning control law with frequency shaping is derived and demonstrated.
Several ways for obtaining aerodynamic parameters of an aircraft from flight data are presented. A brief description of data analysis from steady measurements is given, and a concept of system identification is introduced. This is followed by a mathematical model of an aircraft with aerodynamic forces and moments approximated either by polynomials or splines and a detailed treatment of two often-used techniques for parameter estimation. Because of renewed interest in frequency-domain analysis, one section of the paper is devoted to this problem. The methods are demonstrated in several examples using real flight data.
This paper describes an on-orbit modal identification experiment design for large space structures. Space Station Freedom (SSF) systems design definition and structural dynamic models were used as representative large space structures for optimizing experiment design. Important structural modes of study models were selected to provide a guide for experiment design and used to assess the design performance. A pulsed random excitation technique using propulsion jets was developed to identify closely-spaced modes. A measuremenat location selection approach was developed to estimate accurate mode shapes as well as frequencies and damping factors. The data acquisition system and operational scenarios were designed to have minimal impacts on the SSF. A comprehensive simulation was conducted to assess the overall performance of the experiment design.
A method was developed for the detection and measurement of a periodic signal with unknown characteristics in a data set where the existence of such signal was not known. The method detects a signal by using Bayesian probability theory to compare a constant model for the signal to members of a class of models with periodic structure. The method was applied to simulated data generated with both stepwise and sinusoidal light curves, demonstrating that such signals can be sensitively detected and the signal frequency and its shape can be accurately estimated.
Spectral line observations in radio astronomy require simultaneous power estimation in many (often hundreds to thousands) frequency bins. Digital autocorrelation spectrometers, which appeared thirty years ago, are now being implemented in VLSI. The same architecture can be used to implement transversal digital filters. This was done at the Arecibo Observatory for pulse compression in radar observations of Venus.
The pure rotational spectrum of the MgF radical in its ground X(sup 2) Sigma(+) electronic state has been observed in the laboratory using millimeter/submillimeter direct absorption spectroscopy. Rotational transitions arising from the v = 0, 1, 2, and 3 vibrational modes of the main magnesium isotopic species, (24)MgF, have been recorded, as well as those arising from the v = 0 state of the Mg-25 and Mg-26 isotopomers. Rotational and fine-structure constants have been determined for these molecules, as well as hyperfine parameters for both the F-19 (I = 1/2) and Mg-25 (I = 5/2) nuclei. The rest frequencies presented here for MgF have an estimated accuracy of +/- 200 kHz, and will enable astronomical searches to be carried out for this fluoride radical. Magnesium fluoride may be present in the late-type carbon star IRC +10216, where AlF appears to be abundant.
In arid environments, specific microwave signatures have been observed with the Special Sensor Microwave/Imager (SSM/I). For a given diurnal change in surface skin temperature, the corresponding change in the microwave brightness temperature is smaller than expected. With the help of a 1D, time-dependent heat conduction model, this behavior is explained by microwave radiation coming from different depths in the soil, depending on the soil type and on the microwave radiation frequency. Using the eight-times daily estimates of the surface skin temperature by the International Satellite Cloud Climatology Project (ISCCP) and a simple Fresnel model, collocated month-long time series of the SSM/I brightness temperatures and the surface skin temperatures give a consistent estimate of the effective microwave emissivity and penetration depth parameters. Results are presented and analyzed for the Sahara and the Arabian Peninsula, for July and November 1992. The case of the Australian desert is also briefly mentioned. Assuming a reasonable thermal diffusivity for the soil in desert areas, the microwave radiation is estimated to come from soil layers down to depths of at least five wavelengths in some locations. Regions where the microwave radiation comes from deeper soil layers also have large microwave emissivity polarization differences and large visible reflectances, suggesting that these areas correspond to sand dune fields.
Spectral lags (tau(sub lag)) are deduced for 1437 long (T(sub 90) greater than 2 s) BATSE gamma-ray bursts (GRBs) with peak flux F(sub p) greater than 0.25 photons cm(sup -2)/s, near to the BATSE trigger threshold. The lags are modeled to approximate the observed distribution in the F(sub p)-T(sub lag) plane, realizing a noise-free representation. Assuming a two-branch lag-luminosity relationship, the lags are self-consistently corrected for cosmological effects to yield distributions in luminosity, distance, and redshift. The results have several consequences for GRB populations and for unified gamma-ray/afterglow scenarios which would account for afterglow break times and gamma-ray spectral evolution in terms of jet opening angle, viewing angle, or a profiled jet with variable Lorentz factor: A component of the burst sample is identified - those with few, wide pulses, lags of a few tenths to several seconds, and soft spectra - whose Log[N]-Log[F(sub p)] distribution approximates a -3/2 power-law, suggesting homogeneity and thus relatively nearby sources. The proportion of these long-lag bursts increases from negligible among bright BATSE bursts to approx. 50% at trigger threshold. Bursts with very long lags, approx. 1-2 less than tau(sub lag) (S) less than 10, show a tendency to concentrate near the Supergalactic Plane with a quadrupole moment of approx. -0.10 +/- 0.04. GRB 980425 (SN 1998bw) is a member of this subsample of approx. 90 bursts with estimated distances less than 100 Mpc. The frequency of the observed ultra-low luminosity bursts is approx. 1/4 that of SNe Ib/c within the same volume. If truly nearby, the core-collapse events associated with these GRBs might produce gravitational radiation detectable by LIGO-II. Such nearby bursts might also help explain flattening of the cosmic ray spectrum at ultra-high energies, as observed by AGASA.
NASA s Marshall Space Flight Center s Systematic Image-Based Optical Alignment (SIBOA) Testbed was developed to test phase retrieval algorithms and hardware techniques. Individuals working with the facility developed the idea of implementing phase retrieval by breaking the determination of the tip/tilt of each mirror apart from the piston motion (or translation) of each mirror. Presented in this report is an algorithm that determines the optimal phase correction associated only with the piston motion of the mirrors. A description of the Phase Retrieval problem is first presented. The Systematic Image-Based Optical Alignment (SIBOA) Testbeb is then described. A Discrete Fourier Transform (DFT) is necessary to transfer the incoming wavefront (or estimate of phase error) into the spatial frequency domain to compare it with the image. A method for reducing the DFT to seven scalar/matrix multiplications is presented. A genetic algorithm is then used to search for the phase error. The results of this new algorithm on a test problem are presented.
This paper presents an approach to measuring all major components of the water cycle from space. The goal of the paper is to explore the concept of using a sensor-web of satellites to observe the global water cycle. The details of the required measurements and observation systems are therefore only an initial approach and will undergo future refinement, as their details will be highly important. Key elements include observation and evaluation of all components of the water cycle in terms of the storage of water-in the ocean, air, cloud and precipitation, in soil, ground water, snow and ice, and in lakes and rivers-and in terms of the global fluxes of water between these reservoirs. For each component of the water cycle that must be observed, the appropriate temporal and spatial scales of measurement are estimated, along with the some of the frequencies that have been used for active and passive microwave observations of the quantities. The suggested types of microwave observations are based on the heritage for such measurements, and some aspects of the recent heritage of these measurement algorithms are listed. The observational requirements are based on present observational systems, as modified by expectations for future needs. Approaches to the development of space systems for measuring the global water cycle can be based on these observational requirements.
In situ measurements of ionospheric D-region characteristics are somewhat scarce and rely mostly on sounding rockets. Remote sensing techniques employing Very Low Frequency (VLF) transmitters can provide electron density estimates from subionospheric wave propagation modeling. Here we discuss how lightning waveform measurements, namely sferics and tweeks, can be used for monitoring the D-region variability and day-night transition, and for local electron density estimates. A brief comparison among D-region aeronomy models is also presented.
X-ray brightness oscillations during thermonuclear X-ray bursts--burst oscillations--have provided a new probe of neutron star spins as well as of the dependent nuclear burning processes. The frequency drift and amplitude evolution of the oscillations observed during bursts can in principle place constraints on the physics of thermonuclear flame spreading and the dynamics of the burning atmosphere. I use simulations appropriate to LOFT to explore the precision with which the time dependence of the oscillation frequency can be inferred. This can test, for example, different models for the frequency drift, such as up-lift versus geostrophic drift. I also explore the precision with which asymptotic frequencies can be constrained in order to estimate the capability for LOFT to detect the Doppler shifts induced by orbital motion of the neutron star from a sample of bursts at different orbital phases.
The Advanced Technology Microwave Sounder (ATMS), on SNPP and NOAA-20, provides vertical atmospheric temperature and moisture profiles that are a key input to numerical weather prediction. Full characterization of radiometric noise is critical to error modeling, algorithm development and the potential development of performance requirements and product improvements. This paper presents estimates of white noise and low-frequency 1/f noise as derived from the Allan variance and scan-to-scan autocorrelations of data from the internal hot calibration. This approach allows direct comparison of on-orbit performance of the two units as well as comparison between ground calibration test data and on-orbit performance. The autocorrelation at multiple scan intervals is used as input to a theoretical model of the NET of inferred scene brightness temperature, when using weighted samples of calibration data over multiple scans. This will support selection of optimized calibration weighting functions for each channel, as well as providing further insight into the striping phenomenon. These measured autocorrelations are also compared to the autocorrelations derived from the 1/f spectra obtained both in special ground and on-orbit tests that characterize gain fluctuation. Channel cross-correlations are also presented, which can have a significant impact on effectiveness of direct assimilation performance.
A new airborne synthetic aperture radar (SAR) system was recently developed for the estimation of snow water equivalent (SWE). The radar is part of the SWESARR (Snow Water Equivalent Synthetic Aperture Radar and Radiometer) instrument, an active passive microwave system specifically designed for the accurate estimation of SWE. The dual polarization (VV, VH) radar operates at three frequency bands (9.65 GHz, 13.6 GHz, and 17.25 GHz), with bandwidths of up to 200 MHz. The radar flew its first flight campaign in November 2019, along with SWESARR’s - already operational – radiometer. The radar collected comprehensive data sets over various terrains that show a successful system performance. The inst slated to participate in future SnowEx campaigns.
Atmospheric 3D winds in the horizontal and vertical directions are critical for improving short-range and long-range forecasting. Such advancement in forecasting directly applies to research in a number of areas including convective processes, wildfire plumes and tornado prediction. Atmospheric Motion Vectors (AMVs) provide a passively sensed approach to quantifying horizontal motion and cloud heights, which are typically sourced from geostationary sensors due to the availability of high frequency observations. Recent work has shown that estimating AMVs by tracking individual pixels with dense optical flow is a promising new direction. In this work, we use a state-of-the-art convolutional neural network for optical flow (FlowNetS) in a physics-guided deep learning framework for predicting AMVs in the horizontal direction. The approach is semi-supervised and uses physically informed wind vectors from high-resolution numerical simulations (DYAMOND) for supervised learning followed by fine-tuning though warping and reconstruction of full-disk geostationary images (GOES-16). In the vertical direction, we use labels from the CALIPSO low-earth orbit satellite to predict cloud height from 16-band geostationary images with a neural network. We present results for both tasks on held-out time periods and secondary datasets.
Observations of atmospheric 3D winds are critical for improving short-range and long-range forecasting. Such advancement in forecasting directly applies to research in a number of areas including convective processes, wildfire plumes and tornado prediction. Atmospheric Motion Vectors (AMVs) provide a passively sensed approach to quantifying horizontal motion and cloud heights, which are typically sourced from geostationary sensors due to the availability of high frequency observations. Recent work has shown that estimating AMVs by tracking individual pixels with dense optical flow is a promising new direction. In this work, we compare state-of-the-art convolutional neural networks for optical flow in a physics-guided deep learning framework for predicting AMVs. The approach is semi-supervised and uses physically informed wind vectors from high-resolution numerical simulations for supervised learning followed by fine-tuning though warping and reconstruction of full-disk geostationary images (GOES-16). In the vertical direction, we use labels from the CALIPSO low-earth orbit satellite to predict cloud height from 16-band geostationary images with a neural network. We present results for both tasks on held-out time periods and secondary datasets.
Creep and relaxation are the two major time-dependent fracturing processes in rocks. While a considerable amount of research has been done in understanding these two mechanisms, critical gaps remain regarding how different energy components evolve during time-dependent fracturing processes in rocks. In this study, a series of relaxation and creep experiments were conducted on prismatic Barre granite specimens in the laboratory to estimate the energy budget of brittle fracturing in granite. For the input energy, the work done by the machine (W) is calculated and for the output energy the radiated seismic energy (E R ), released in the form of acoustic emissions (AEs), is calculated as the only measurable output energy component in the conducted experiments. The low-frequency plateau (Ω 0 ) and corner frequency (f 0 ) for each AE waveform was estimated by fitting the observed AE spectra with the theoretical spectra using the Omega model. These parameters were used to estimate the seismic moments (M 0 ) based on the radiation pattern for the double couple (shear) and non-double-couple (non-shear) events. The range of f 0 and M 0 varied from 150 to 750 kHz and 10 –4 to 10 –1 N m, respectively. Moment magnitude (M w ) varied in a wider range from –9 to –6 in creep and –8.5 to –7 in relaxation. Stress drops (Δ σ ) and source radius (r) were estimated for the AEs using Brune’s model. Here, the results report on three primary observations: (1) the effects of different source mechanisms on the estimated source parameters showed that M 0 and Δ σ were higher for DC events as compared to NDC in both relaxation and creep. (2) The radiation efficiency in the case of creep is 70% higher as compared to relaxation and, (3) the stress drop estimated in relaxation and creep demonstrated a breakdown in scaling with the seismic moment.
To explore the hypothesis of a common source of variability in two time series, observers may estimate the magnitude-squared coherence (MSC), which is a frequency-domain view of the cross correlation. For time series that do not have uniform observing cadence, MSC can be estimated using Welch's overlapping segment averaging. However, multitaper has superior statistical properties to Welch's method in terms of the tradeoff between bias, variance, and bandwidth. The classical multitaper technique has recently been extended to accommodate time series with underlying uniform observing cadence from which some observations are missing. This situation is common for solar and geomagnetic data sets, which may have gaps due to breaks in satellite coverage, instrument downtime, or poor observing conditions. We demonstrate the scientific use of missing-data multitaper magnitude-squared coherence by detecting known solar mid-term oscillations in simultaneous, missing-data time series of solar Lyman α flux and geomagnetic Disturbance Storm Time index. Due to their superior statistical properties, we recommend that multitaper methods be used for all heliospheric time series with underlying uniform observing cadence.