Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “diffractive computing”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 973 records · Page 54

High performance computation of residual stress and distortion in laser welded 301L stainless sheets

Transient thermo-mechanical simulation of stainless plate laser welding process was performed by a highly efficient and accurate approach-hybrid iterative substructure and adaptive mesh method. Especially, residual stress prediction was enhanced by considering various heat effects in the numerical model. The influence of laser welding heat input on residual stress and welding distortion of stainless thin sheets were investigated by experiment and simulation. X-ray diffraction (XRD) and contour method were used to measure the surficial and internal residual stress respectively. Effect of strain hardening, annealing and melting on residual stress prediction was clarified through a parametric study. It was shown that these heat effects must be taken into account for accurate prediction of residual stresses in laser welded stainless sheets. Reasonable agreement among residual stresses by numerical method, XRD and contour method was obtained. Buckling type welding distortion was also well reproduced by the developed thermo-mechanical FEM.

36 MATERIALS SCIENCE↗

Molecular and electronic structure of Re 2 Br 4 (PMe 3 ) 4

The dinuclear rhenium(II) complex Re 2 Br 4 (PMe 3 ) 4 was prepared from the reduction of [Re 2 Br 8 ] 2– with ( n -Bu 4 N)BH 4 in the presence of PMe 3 in propanol. The complex was characterized by single-crystal X-ray diffraction (SCXRD) and UV–visible spectroscopy. It crystallizes in the monoclinic C2/c space group and is isostructural with its molybdenum and technetium analogues. The Re–Re distance (2.2521(3) Å) is slightly longer than the one in Re 2 Cl 4 (PMe 3 ) 4 (2.247(1) Å). The molecular and electronic structure of Re 2 X 4 (PMe 3 ) 4 (X = Cl, Br) were studied by multiconfigurational quantum chemical methods. The computed ground-state geometry is in excellent agreement with the experimental structure determined by SCXRD. The calculated total bond order (2.75) is consistent with the presence of an electron-rich triple bond and is similar to the one found for Re 2 Cl 4 (PMe 3 ) 4 . The electronic absorption spectrum of Re 2 Br 4 (PMe 3 ) 4 was recorded in benzene and shows a series of low-intensity bands in the range 10 000–26 000 cm –1 . The absorption bands were assigned based on calculations of the excitation energies with the multireference wave functions followed by second-order perturbation theory using the CASSCF/CASPT2 method. As a result, calculations predict that the lowest energy band corresponds to the δ* → σ* transition, while the next higher energy bands were attributed to the δ* → π*, δ → σ*, and δ → π* transitions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Crystal Morphology and Phase Transformation of LiAlO 2 : Combined Experimental and First-Principles Studies

Layered α-LiAlO 2 matrix often suffers from detrimental structural and morphological changes during its lifetime, especially under H 2 containing fuel inlet environments of molten carbonate fuel cell systems. However, the underlying mechanism of this phase and morphological transformations has rarely been explored. In this study, transmission electron microscopy (TEM) techniques were used to determine the changes in structure and morphology of LiAlO 2 samples lifted by a focused ion beam (FIB). In accordance with X-ray diffraction (XRD) analysis, TEM images show that under H-rich conditions the rhombohedral α-LiAlO 2 transforms to tetragonal γ-LiAlO 2 phase with the appearance of the (101) terminated octahedral shaped γ-LiAlO 2 crystallites. We further support, and plausibly rationalize, the observed transformations using density functional theory (DFT) calculation. The DFT computed surface energies of γ-LiAlO 2 reveal that the {101} surface becomes the lowest energy surface upon H-adsorption, thus leading to formation of observed octahedral geometry. Contrary to stabilization of γ-LiAlO 2 surfaces upon H passivation, DFT revealed H-adsorption on α-LiAlO 2 surfaces to be energetically unfavorable. Furthermore, this contrasting behavior of α-LiAlO 2 and γ-LiAlO 2 under H-rich environments could be a potential driving force for the observed α-LiAlO 2 to γ-LiAlO 2 phase transformation.

36 MATERIALS SCIENCE↗

Au 3 -to-Ag 3 coordinate-covalent bonding and other supramolecular interactions with covalent bonding strength

An efficient strategy for designing charge-transfer complexes using coinage metal cyclic trinuclear complexes (CTCs) is described herein. Due to opposite quadrupolar electrostatic contributions from metal ions and ligand substituents, [Au(m-Pz-(i-C 3 H7) 2 )] 3 ∙[Ag(m-Tz-(n-C 3 F 7 ) 2 )] 3 (Pz = pyrazolate, Tz = triazolate) has been obtained and its structure verified by single crystal X-ray diffraction – representing the 1st crystallographically-verified M 3 @M' 3 stacked adduct of monovalent coinage metal CTCs. Abundant supramolecular interactions with aggregate covalent bonding strength arise from a combination of M–M' (Au / Ag), metal–π, π–π interactions and hydrogen bonding in this charge-transfer complex, according to density functional theory analyses, yielding a computed binding energy of 66 kcal mol -1 between the two trimer moieties – a large value for intermolecular interactions between adjacent d 10 centres (nearly doubling the value for a recently claimed Au(I) / Cu(I) polar-covalent bond: Proc. Natl. Acad. Sci. U.S.A., 2017, 114, E5042) – which becomes 87 kcal mol -1 with benzene stacking. Surprisingly, DFT analysis suggests that: (a) some other literature precedents should have attained a stacked M 3 @M' 3 product akin to the one herein, with similar or even higher binding energy; and (b) a high overall intertrimer bonding energy by inferior electrostatic assistance, underscoring genuine orbital overlap between M and M' frontier molecular orbitals in such polar-covalent M–M' bonds in this family of molecules. The Au / Ag bonding is reminiscent of classical Werner-type coordinate-covalent bonds such as H 3 N: → Ag in [Ag(NH 3 ) 2 ] + , as demonstrated herein quantitatively. Solidstate and molecular modeling illustrate electron flow from the p-basic gold trimer to the p-acidic silver trimer with augmented contributions from ligand-to-ligand’ (LL'CT) and metal-to-ligand (MLCT) charge transfer.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Experimental Study of Local Micro-forming for Bi-HTS

The Bi-HTS (BSCCO high temperature superconductor) tape now has become the product in an industrial way, which has been available to apply in electric and electron fields. The main way to manufacture Bi-HTS tape is to use the technique of oxide powder in silver tube (OPIT), which involves the multi-step drawing and rolling with plastic deformation, which obviously belongs to a type of the micro-forming in macro-scale processing. There are two main characteristics founded: (a) contact and friction between silver and BSCCO surfaces, (b) interface between two materials. A series of micro-tensile experiments of silver foil with thicknesses of 0.03, 0.06 and 0.1 mm are designed to investigate the behaviors of silver with various scale of sizes. And the surface topography measurements have been carried out to analyze the changes in surface topography. Based upon experiments, some topics are researched which are referred to inhomogeneous, local effect, size effect, grain and micro-structure affecting, surface roughness, long-distance sausage phenomenon. Further the local breakdown of silver by Bi-HTS powder during process is analyzed through failure criterion. The results of this work will bring out an important exploration value to the theory and computation of micro-forming.

36 MATERIALS SCIENCE↗

Simulation of the UT inspection of planar defects using a generic GTD-Kirchhoff approach

The modeling of ultrasonic Non Destructive Evaluation often plays an important part in the assessment of detection capabilities or as a help to interpret experiments. The ultrasonic modeling tool of the CIVA platform uses semi-analytical approximations for fast computations. Kirchhoff and GTD are two classical approximations for the modeling of echoes from plane-like defects such as cracks, and they aim at taking into account two different types of physical phenomena. The Kirchhoff approximation is mainly suitable to predict specular reflections from the flaw surface, whereas GTD is dedicated to the modeling of edge diffraction. As a consequence, these two approximations have distinct and complementary validity domains. Choosing between them requires expertise and is problematic in some inspection configurations. The Physical Theory of Diffraction (PTD) was developed based on both Kirchhoff and GTD in order to combine their advantages and overcome their limitations. The theoretical basis for PTD and its integration in the CIVA modeling approach are discussed in this communication. Several results that validate this newly developed model and illustrate its advantages are presented.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

The First Neptunium Dioxide Neutron Diffraction Experiment at HFIR

Here we present the first neutron diffraction experiment of a 50 mg sample of neptunium(IV) dioxide (NpO 2 ) powder at the High Flux Isotope Reactor (HFIR) using the wide-angle neutron diffractometer (WAND 2 ) HB-2C. We also provide a brief literature survey to pinpoint gaps in the crystal, electronic, and magnetic structure of NpO 2 to determine the optimum experiment to be pursued in the next HFIR user proposal cycle. Characterizing actinide materials with neutron diffraction, inelastic scattering, neutron imaging, polarized neutron studies, and small-angle neutron scattering techniques will increase our understanding of 5f electron behavior and elucidate atomic and magnetic structural properties. This strategy will help fill gaps in the literature and provide theoretical physicists with the data needed to build physical and chemical models to guide and validate computational methods. These methods may be used for predicting structural and chemical features of actinide-based materials. This proof-of-principle effort begins to uncover how to advance actinide science and technology at Oak Ridge National Laboratory (ORNL) using neutron capabilities. This effort has already sparked collaborative discussions between researchers outside the Radioisotope Science and Technology Division, including theoretical physicists from the Nuclear Nonproliferation Division and beamline scientists in the Neutron Scattering Division. We intend to continue pursuing neutron experiments and develop a scientific strategy focused on studying transuranium elements (e.g., Np, Pu, Am, and Cm) using the advanced neutron capabilities at ORNL.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Real-time sparse-sampled Ptychographic imaging through deep neural networks

Ptychography has rapidly grown in the fields of X-ray and electron imaging for its unprecedented ability to achieve nano or atomic scale resolution while simultaneously retrieving chemical or magnetic information from a sample. A ptychographic reconstruction is achieved by means of solving a complex inverse problem that imposes constraints both on the acquisition and on the analysis of the data, which typically precludes real-time imaging due to computational cost involved in solving this inverse problem. In this work we propose PtychoNN, a novel approach to solve the ptychography reconstruction problem based on deep convolutional neural networks. We demonstrate how the proposed method can be used to predict real-space structure and phase at each scan point solely from the corresponding far-field diffraction data. The presented results demonstrate how PtychoNN can effectively be used on experimental data, being able to generate high quality reconstructions of a sample up to hundreds of times faster than state-of-the-art ptychography reconstruction solutions once trained. By surpassing the typical constraints of iterative model-based methods, we can significantly relax the data acquisition sampling conditions and produce equally satisfactory reconstructions. Besides drastically accelerating acquisition and analysis, this capability can enable new imaging scenarios that were not possible before, in cases of dose sensitive, dynamic and extremely voluminous samples.

Cherukara, Mathew J↗

Materials genome innovation for computational software (magics) center

Functional layered material (LM) architectures will dominate nanomaterials science in this century. We have developed theory, modeling, simulation, and software and data tools that enhance understanding and AI guide synthesis, enable characterization of complex structures, and improve capabilities in the predictive design and growth of LMs. Research at the Center has focused on: Computational synthesis and characterization: AI guided synthesis and experimental synthesis of stacked LMs with tailored properties via optimized chemical vapor deposition (CVD) growth and liquid-phase exfoliation; study defects, edges, grain boundaries, wrinkling of atomic layers and their effects on chemical, mechanical, electrical, and optical properties. Far-from-equilibrium processes: Joint experimental and simulation based probe of electronic processes with NAQMD and ultrafast X-ray free-electron laser (XFEL) and ultrafast electron diffraction (UED) facilities at Stanford. Experimentally validate NAQMD by ultrafast electron diffraction and X-ray spectroscopy studies of structural and excited state dynamics, shape fluctuations, and phonon dynamics. Scalable software: Simulation engines for desktop-to-exascale platforms using low-overhead, linear-scaling QMD algorithms; divide-conquer-recombine NAQMD with electronic excitations; extended-Lagrangian reactive molecular dynamics (RMD), machine learning (ML) based neural-network quantum molecular dynamics (NNQMD), and super-state accelerated molecular dynamics (AMD) and kinetic Monte Carlo codes; thermal and electrical transport software; and design 3D architectures of LMs with desired functionality using scalable software. Distribution of software and data, and training: Software and simulation-experimental data generated within the Center are distributed to the materials science community via Berkeley Materials Project (MP) framework. We have also organized three workshops for software distribution and training at USC (Nov. 2017, Mar. 2018) and Gaithersburg, MD (Nov. 2018) to train researchers, with the last one in focused on underrepresented groups, in collaboration with Howard University which is one of the largest HBCUs. The Center supported a total of 46 personnel and 6 undergraduate students. These include 14 faculty, 11 postdoctoral research associates, 20 graduate research assistants, and mentored 6 undergraduate students. This resulted in the publications of 63 research papers that include 46 publications on Reactive and Quantum Dynamics Simulations, 13 publications on Machine Learning for Quantum Materials, and 4 publications on Quantum Computing.

2D Materials↗

An Atomic View of Cation Diffusion Pathways from Single‐Crystal Topochemical Transformations

Abstract The diffusion pathways of Li‐ions as they traverse cathode structures in the course of insertion reactions underpin many questions fundamental to the functionality of Li‐ion batteries. Much current knowledge derives from computational models or the imaging of lithiation behavior at larger length scales; however, it remains difficult to experimentally image Li‐ion diffusion at the atomistic level. Here, by using topochemical Li‐ion insertion and extraction to induce single‐crystal‐to‐single‐crystal transformations in a tunnel‐structured V 2 O 5 polymorph, coupled with operando powder X‐ray diffraction, we leverage single‐crystal X‐ray diffraction to identify the sequence of lattice interstitial sites preferred by Li‐ions to high depths of discharge, and use electron density maps to create a snapshot of ion diffusion in a metastable phase. Our methods enable the atomistic imaging of Li‐ions in this cathode material in kinetic states and provide an experimentally validated angstrom‐level 3D picture of atomic pathways thus far only conjectured through DFT calculations.

Handy, Joseph V.↗

Elucidating texture and grain morphology contributions to the micromechanical response of additively manufactured Inconel 625

Microstructural variation of additively manufactured (AM) metal components in comparison to wrought counterparts makes certification for critical applications a challenge. Microscale simulations leveraging modern computational tools may be used to supplement testing of AM microstructures, thus accelerating certification by reducing the number of experiments needed. However, as micromechanical response is closely tied to critical properties like fatigue-life and fracture, utilization of these simulations with macroscale experimental data alone is insufficient. One means to attain microscale experimental data is in situ diffraction data collected from synchrotron X-ray sources. In this work, such data were collected during in situ compression of AM Inconel 625 superalloy. Interpretation of experimental results was assisted by massive (8M element) complementary micromechanical simulations performed on sets of virtual microstructures generated using cellular automata. Together, micromechanical data from diffraction experiments and simulations were used to probe the effects of textured “track” microstructures generated during laser powder bed fusion and directional strength-to-stiffness on micromechanical response. Though fiber-averaged directional strength-to-stiffness ratios were expected to dominate given the high elastic anisotropy of the material, the combination of small variations in texture and specific grain configurations unique to AM microstructures lead to significant variability in micromechanical response after yield. The findings emphasize the importance of high-fidelity microstructural representation that captures key texture components and AM-specific morphology for property prediction of AM metals.

36 MATERIALS SCIENCE↗

Topological analysis of void spaces in tungstate frameworks: Assessing storage properties for the environmentally important guest molecules and ions: CO 2 , UO 2 , PuO 2 , U, Pu, Sr 2+ , Cs + , CH 4 , and H 2

The identification of inorganic materials, which are able to encapsulate environmentally important small molecules or ions via host-guest interactions, is crucial for the design and development of next-generation energy sources and for storing environmental waste. Especially sought after are molecular sponges with the ability to incorporate CO 2 , gas pollutants, or nuclear waste materials such as UO 2 and PuO 2 oxides or U, Pu, Sr 2+ or Cs + ions. Porous framework structures promise very attractive prospects for applications in environmental technologies, if they are able to incorporate CH 4 for biogas energy applications, or to store H 2 , which is important for fuel cells e.g. in the automotive industry. All of these applications should benefit from the host being resistant to extreme conditions such as heat, nuclear radiation, rapid gas expansion, or wear and tear from heavy gas cycling. As inorganic tungstates are well known for their thermal stability, and their rigid open-framework networks, the potential of Na 2 O-Al 2 O 3 -WO 3 and Na 2 O-WO 3 phases for such applications was evaluated. To this end, all known experimentally-determined crystal structures with the stoichiometric formula M a M’ b W c O d (M = any element) are surveyed together with all corresponding theoretically calculated Na a Al b W c O d and Na x W y O z structures that are statistically likely to form. Network descriptors that categorize these host structures are used to reveal topological patterns in the hosts, including the nature of porous cages which are able to accommodate a certain type of guest; this leads to the classification of preferential structure types for a given environmental storage application. Crystal structures of two new tungstates NaAlW 2 O 8 (1) and NaAlW 3 O 11 (2) and one updated structure determination of Na 2 W 2 O 7 (3) are also presented from in-house X-ray diffraction studies, and their potential merits for environmental applications are assessed against those of this larger data-sourced survey. Altogether, results show that tungstate structures with three-nodal topologies are most frequently able to accommodate CH 4 or H 2 , while CO 2 appears to be captured by a wide range of nodal structure types. The computationally generated host structures appear systematically smaller than the experimentally determined structures. For the structures of 1 and 2, potential applications in nuclear waste storage seem feasible.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Superlattice reflection signatures of the insulator–metal transition in V 3 O 5 thin films

Nanoelectronic systems that are inspired by the brain are increasingly looking to insulator–metal transition (IMT) materials as they can mimic the response characteristics of neurons to temperature changes so that these can be used in robotic and computational applications. V 3 O 5 has an insulator–metal transition at ∼430 or ∼80 K higher than VO 2 and provides a unique high-temperature opportunity for these types of applications. Here, in this work, we track the structural evolution of V 3 O 5 thin films across the IMT through conventional selected-area electron diffraction (SAED) and four-dimensional scanning TEM (4D-STEM), correlated with temperature-dependent resistance measurements. SAED patterns show reversible evidence of superlattice reflections associated with the IMT—present below T IMT and absent above it—consistent with the accompanying drop in resistance. At room temperature, nanobeam electron diffraction patterns further reveal three local configurations: (i) type I regions with clean patterns lacking superlattice reflections and spot splitting; (ii) type II regions exhibiting rows of superlattice reflections and split spots indicative of crystallographic variants; and (iii) type III regions with negligible superlattice reflections but larger spot splitting suggestive of overlapping domains of insulating and conducting phases likely driven by local lattice distortions. Upon heating, the superlattice reflections disappear between 413 and 453 K, concurrent with the resistance drop at T IMT , consistent with the emergence of a conducting phase. The overall diffraction geometry remains essentially unchanged up to 573 K, implying that relative domain orientations persist through the transition. These observations reveal nanoscale structural heterogeneity in V 3 O 5 thin films across the IMT and inform operation in regimes where mixed-phase textures are expected. A plausible indexing framework rationalizing the observed geometries is presented in the Discussion section, alongside its limitations and alternative interpretations.

25 ENERGY STORAGE↗

Direct growth of crystalline SiGe nanowires on superconducting NbTiN thin films

Novel heterostructures created by coupling one-dimensional semiconductor nanowires with a superconducting thin film show great potential toward next-generation quantum computing. Here, by growing high-crystalline SiGe nanowires on a NbTiN thin film, the resulting heterostructure exhibits Ohmic characteristics as well as a shift of the superconducting transition temperature (T c ). The structure was characterized at atomic resolution showing a sharp SiGe/NbTiN interface without atomic interdiffusion. Lattice spacing, as calculated from large-area x-ray diffraction experiments, suggests a potential preferred d-spacing matching between (200) NbTiN and (110) SiGe grains. The observed out-of-plane compressive strain within the NbTiN films coupled with SiGe nanowires explains the downward shift of the superconductivity behavior. The presented results post scientific insights toward functional heterostructures by coupling multi-dimensional materials, which could enable tunable superconductivity that benefits the quantum science applications.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Discovery of Nb hydride precipitates in superconducting qubits

We report the first evidence of the formation of niobium hydrides within niobium films on silicon substrates in superconducting qubits fabricated at Rigetti Computing. We combine complementary techniques including room and cryogenic temperature atomic scale high-resolution and scanning transmission electron microscopy (HR-TEM and STEM), atomic force microscopy (AFM), and the time-of-flight secondary ion mass spectroscopy (TOF-SIMS) to reveal the existence of the niobium hydride precipitates directly in the Rigetti chip areas. Electron diffraction and high-resolution transmission electron microscopy (HR-TEM) analyses are performed at room and cryogenic temperatures (~106 K) on superconducting qubit niobium film areas, and reveal the formation of three types of Nb hydride domains with different crystalline orientations and atomic structures. There is also variation in their size and morphology from small (~5 nm) irregular shape domains within the Nb grains to large (~10-100 nm) Nb grains fully converted to niobium hydride. As niobium hydrides are non-superconducting and can easily change in size and location upon different cooldowns to cryogenic temperatures, our findings highlight a new previously unknown source of decoherence in superconducting qubits, contributing to both quasiparticle and two-level system (TLS) losses, and offering a potential explanation for qubit performance changes upon cooldowns. A pathway to mitigate the formation of the Nb hydrides for superconducting qubit applications is also discussed.

Lee, Jaeyel↗

On-the-fly generation of differential resonance scattering probability distribution functions for Monte Carlo codes

Current Monte Carlo codes use one of three models to model neutron scattering in the epithermal energy range: (1) the asymptotic scattering model, (2) the free gas scattering model, or (3) the S({alpha},{beta}) model, depending on the neutron energy and the specific Monte Carlo code. The free gas scattering model assumes the scattering cross section is constant over the neutron energy range, which is usually a good approximation for light nuclei, but not for heavy nuclei where the scattering cross section may have several resonances in the epithermal region. Several researchers in the field have shown that using the free gas scattering model in the vicinity of the resonances in the lower epithermal range can under-predict resonance absorption due to the up-scattering phenomenon. Existing methods all involve performing the collision analysis in the center-of-mass frame, followed by a conversion back to the laboratory frame. In this paper, we will present a new sampling methodology that (1) accounts for the energy-dependent scattering cross sections in the collision analysis and (2) acts in the laboratory frame, avoiding the conversion to the center-of-mass frame. The energy dependence of the scattering cross section was modeled with even-ordered polynomials to approximate the scattering cross section in Blackshaw's equations for the moments of the differential scattering PDFs. These moments were used to sample the outgoing neutron speed and angle in the laboratory frame on-the-fly during the random walk of the neutron. Results for criticality studies on fuel pin and fuel assembly calculations using these methods showed very close comparison to results using the reference Doppler-broadened rejection correction (DBRC) scheme. (authors)

97 MATHEMATICS AND COMPUTING↗