Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “System Operations”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 973 records · Page 54

Analysis of information systems for hydropower operations

The operations of hydropower systems were analyzed with emphasis on water resource management, to determine how aerospace derived information system technologies can increase energy output. Better utilization of water resources was sought through improved reservoir inflow forecasting based on use of hydrometeorologic information systems with new or improved sensors, satellite data relay systems, and use of advanced scheduling techniques for water release. Specific mechanisms for increased energy output were determined, principally the use of more timely and accurate short term (0-7 days) inflow information to reduce spillage caused by unanticipated dynamic high inflow events. The hydrometeorologic models used in predicting inflows were examined to determine the sensitivity of inflow prediction accuracy to the many variables employed in the models, and the results used to establish information system requirements. Sensor and data handling system capabilities were reviewed and compared to the requirements, and an improved information system concept outlined.

Sohn, R. L.↗

A Representative Shuttle Environmental Control System

The Representative Shuttle Environmental Control System (RSECS) provides a ground test bed to be used in the early accumulation of component and system operating data, the evaluation of potential system improvements, and possibly the analysis of Shuttle Orbiter test and flight anomalies. Selected components are being subjected to long term tests to determine endurance and corrosion resistance capability prior to Orbiter vehicle experience. Component and system level tests in several cases are being used to support flight certification of Orbiter hardware. These activities are conducted as a development program to allow for timeliness, flexibility, and cost effectiveness not possible in a program burdened by flight documentation and monitoring constraints.

Brose, H. F.↗

Satellites using the 30/20 GHz band

A review of the future options open to satellite system planners focuses attention on the use of the 30/20 GHz band. Very broad bandwidths available, coupled with a primary allocation for fixed satellite service, make the band very attractive. NASA, in concert with the system and service supplier industries, is planning a research and development program aimed at flight demonstration of 30/20 satellite systems which it is hoped will lead to operational system use in the early 1990's. The communication system concepts and the spacecraft systems necessary to support these for operational use in 1990 and beyond are discussed.

Sivo, J. N.↗

Weight and structural analysis of four structural concepts for a land mobile satellite system

The present study is concerned with a Land Mobile Satellite System (LMSS) which can provide mobile communications for commercial and government applications in nonmetropolitan areas of the continental U.S. and Canada as an augmentation to existing and planned terrestrial systems. The satellite system would provide 'narrow band' telecommunications services, thin-route fixed telephone and data services in the 806-890 MHz band, and continuous emergency beacon monitoring in the 406-406.1 MHz band. It is pointed out that a satellite system operating in concert with terrestrial cellular systems could provide truly ubiquitous mobile communications services in the U.S. and Canada. A single shuttle shuttle launch could place the LMSS spacecraft in geosynchronous orbit over the continental U.S. in 1995 with a 10-year lifetime. Attention is given to the structural concepts, a weight analysis, and a structural analysis.

Ferebee, M. J.↗

Aircraft scatterometer observations of soil moisture on rangeland watersheds

Extensive studies conducted by several researchers using truck-mounted active microwave sensors have shown the sensitivity of these sensors to soil moisture variations. The logical extension of these results is the evaluation of similar systems at lower resolutions typical of operational systems. Data collected during a series of aircraft flights in 1978 and 1980 over four rangeland watersheds located near Chickasha, Oklahoma, were analyzed in this study. These data included scatterometer measurements made at 1.6 and 4.75 GHz using a NASA aircraft and ground observations of soil moisture for a wide range of moisture conditions. Data were analyzed for consistency and compared to previous truck and aircraft results. Results indicate that the sensor system is capable of providing consistent estimates of soil moisture under the conditions tested.

Jackson, T. J.↗

MINDS: A microcomputer interactive data system for 8086-based controllers

A microcomputer interactive data system (MINDS) software package for the 8086 family of microcomputers is described. To enhance program understandability and ease of code maintenance, the software is written in PL/M-86, Intel Corporation's high-level system implementation language. The MINDS software is intended to run in residence with real-time digital control software to provide displays of steady-state and transient data. In addition, the MINDS package provides classic monitor capabilities along with extended provisions for debugging an executing control system. The software uses the CP/M-86 operating system developed by Digital Research, Inc., to provide program load capabilities along with a uniform file structure for data and table storage. Finally, a library of input and output subroutines to be used with consoles equipped with PL/M-86 and assembly language is described.

Soeder, J. F.↗

Optical Strain Measurement System Development

Investigations of physical phenomena affecting the durability of SSME components require measurement systems operational in hostile environments. The need for such instrumentation caused the definition and operation of an optical strain measurement system. This optical strain measurement system based on the speckle shift method is being developed. This is a noncontact, automatic method of measuring surface strain in one dimension that corrects for error due to rigid body motion. It provides a gauge length of 1 to 2 mm and allows the region of interest on the test specimen to be mapped point by point. The output is a graphics map of the points inspected on the specimen; data points is stored in quasi-real time. This is the first phase of a multiphase effort in optical strain measurement. The speckle pattern created by the test specimen is interpreted as high order interference fringes resulting from a random diffraction grating, being the natural surface roughness of the specimen. Strain induced on the specimen causes a change in spacing of the surface roughness, which in turn shifts the position of the interference pattern (speckles).

Lant, C. T.↗

Space Station overall management approach for operations

An Operations Management Concept developed by NASA for its Space Station Program is discussed. The operational goals, themes, and design principles established during program development are summarized. The major operations functions are described, including: space systems operations, user support operations, prelaunch/postlanding operations, logistics support operations, market research, and cost/financial management. Strategic, tactical, and execution levels of operational decision-making are defined.

Paules, G.↗

Insect contamination protection for laminar flow surfaces

The ability of modern aircraft surfaces to achieve laminar flow was well-accepted in recent years. Obtaining the maximum benefit of laminar flow for aircraft drag reduction requires maintaining minimum leading-edge contamination. Previously proposed insect contamination prevention methods have proved impractical due to cost, weight, or inconvenience. Past work has shown that insects will not adhere to water-wetted surfaces, but the large volumes of water required for protection rendered such a system impractical. The results of a flight experiment conducted by NASA to evaluate the performance of a porous leading-edge fluid discharge ice protection system operated as an insect contamination protections system are presented. In addition, these flights explored the environmental and atmospheric conditions most suitable for insect accumulation.

Croom, Cynthia C.↗

Development of a 32-bit UNIX-based ELAS workstation

A mini/microcomputer UNIX-based image analysis workstation has been designed and is being implemented to use the Earth Resources Laboratory Applications Software (ELAS). The hardware system includes a MASSCOMP 5600 computer, which is a 32-bit UNIX-based system (compatible with AT&T System V and Berkeley 4.2 BSD operating system), a floating point accelerator, a 474-megabyte fixed disk, a tri-density magnetic tape drive, and an 1152 by 910 by 12-plane color graphics/image interface. The software conversion includes reconfiguring the ELAs driver Master Task, recompiling and then testing the converted application modules. This hardware and software configuration is a self-sufficient image analysis workstation which can be used as a stand-alone system, or networked with other compatible workstations.

Spiering, Bruce A.↗

Airborne water vapor DIAL research: System development and field measurements

This paper describes the airborne differential absorption lidar (DIAL) system developed at the NASA Langley Research Center for remote measurement of water vapor (H2O) and aerosols in the lower atmosphere. The airborne H2O DIAL system was flight tested aboard the NASA Wallops Flight Facility (WFF) Electra aircraft in three separate field deployments between 1989 and 1991. Atmospheric measurements were made under a variety of atmospheric conditions during the flight tests, and several modifications were implemented during this development period to improve system operation. A brief description of the system and major modifications will be presented, and the most significant atmospheric observations will be described.

Higdon, Noah S.↗

Beyond the X-30 - Incorporating mission capability

A review of the X-30 technology demonstration concept is presented, and differences in concept and requirements between a demonstrator and an operational system are discussed. How changes for operational capability can affect vehicle design are considered and a methodology used to estimate the effects of these changes is offered. Attention is given to the feasibility of operational NASP derived vehicles.

Johnson, Donald B.↗

CTOS course

The topics are presented in viewgraph form and include the following: a Center for Intelligent Robotic Systems for Space Exploration (CIRSSE) Testbed Operating System (CTOS) overview; CTOS tasks and applications; building and sending CTOS messages; message data management; X-window input/output; CTOS configuration; CTOS startup; advanced tools and services; motion control systems (MCS), vision services system (VSS), and Petri Net (PN) controllers; and exercises.

Lefebvre, D. R.↗

An iconic programming language for sensor-based robots

In this paper we describe an iconic programming language called Onika for sensor-based robotic systems. Onika is both modular and reconfigurable and can be used with any system architecture and real-time operating system. Onika is also a multi-level programming environment wherein tasks are built by connecting a series of icons which, in turn, can be defined in terms of other icons at the lower levels. Expert users are also allowed to use control block form to define servo tasks. The icons in Onika are both shape and color coded, like the pieces of a jigsaw puzzle, thus providing a form of error control in the development of high level applications.

Gertz, Matthew↗

ISTAR: Intelligent System for Telemetry Analysis in Real-time

The intelligent system for telemetry analysis in real-time (ISTAR) is an advanced vehicle monitoring environment incorporating expert systems, analysis tools, and on-line hypermedia documentation. The system was developed for the Air Force Space and Missile Systems Center (SMC) in Los Angeles, California, in support of the inertial upper stage (IUS) booster vehicle. Over a five year period the system progressed from rapid prototype to operational system. ISTAR has been used to support five IUS missions and countless mission simulations. There were a significant number of lessons learned with respect to integrating an expert system capability into an existing ground system.

Simmons, Charles↗

The role of structural dynamics in the design and operations of space systems: The history, the lessons, the technical challenges of the future

Structural dynamics and its auxiliary fields are the most progressive and challenging areas space system engineering design and operations face. Aerospace systems are dependent on structural dynamicists for their success. Past experiences (history) are colored with many dynamic issues, some producing ground or flight test failures. The innovation and creativity that was brought to these issues and problems are the aura from the past that lights the path to the future. Using this illumination to guide understanding of the dynamic phenomena and designing for its potential occurrence are the keys to successful space systems. Our great paradox, or challenge, is how we remain in depth specialists, yet become generalists to the degree that we make good team members and set the right priorities. This paper will deal with how we performed with acclaim in the past, the basic characteristics of structural dynamics (loads cycle, for example), and the challenges of the future.

Ryan, Robert S.↗

Summary of ADTT Website Functionality and Features

This report summarizes development of the ADTT web-based design environment by the ELORET team in 2000. The Advanced Design Technology Testbed had been in development for several years, with demonstration applications restricted to aerodynamic analyses of subsonic aircraft. The key changes achieved this year were improvements in Web-based accessibility, evaluation of collaborative visualization, remote invocation of geometry updates and performance analysis, and application to aerospace system analysis. Significant effort was also devoted to post-processing of data, chiefly through comparison of similar data for alternative vehicle concepts. Such comparison is an essential requirement for designers to make informed choices between alternatives. The next section of this report provides more discussion of the goals for ADTT development. Section 3 provides screen shots from a sample session in the ADTT environment, including Login and navigation to the project of interest, data inspection, analysis execution and output evaluation. The following section provides discussion of implementation details and recommendations for future development of the software and information technologies that provide the key functionality of the ADTT system. Section 5 discusses the integration architecture for the system, which links machines running different operating systems and provides unified access to data stored in distributed locations. Security is a significant issue for this system, especially for remote access to NAS machines, so Section 6 discusses several architectural considerations with respect to security. Additional details of some aspects of ADTT development are included in Appendices.

Hawke, Veronica↗

Formation Flying of Components of a Large Space Telescope

A conceptual space telescope having an aperture tens of meters wide and a focal length of hundreds of meters would be implemented as a group of six separate optical modules flying in formation: a primary-membrane-mirror module, a relay-mirror module, a focal-plane-assembly module containing a fast steering mirror and secondary and tertiary optics, a primary-mirror-figure-sensing module, a scanning-electron-beam module for controlling the shape of the primary mirror, and a sunshade module. Formation flying would make it unnecessary to maintain the required precise alignments among the modules by means of an impractically massive rigid structure. Instead, a control system operating in conjunction with a metrology system comprising optical and radio subsystems would control the firing of small thrusters on the separate modules to maintain the formation, thereby acting as a virtual rigid structure. The control system would utilize a combination of centralized- and decentralized-control methods according to a leader-follower approach. The feasibility of the concept was demonstrated in computational simulations that showed that relative positions could be maintained to within a fraction of a millimeter and orientations to within several microradians.

Mettler, Edward↗