Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “R PROCESS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 973 records · Page 54

The use of multispectral sensing techniques to detect ponderosa pines trees under stress from insects or diseases

The detection of stress induced by bark beetles in conifers is reviewed in two sections: (1) the analysis of very small scale aerial photographs taken by NASA's RB-57F aircraft on August 10, 1969, and (2) the analysis of multispectral imagery obtained by the optical-mechanical line scanner. Underexposure of all films taken from the RB-57 aircraft and inadequate flight coverage prevented drawing definitive conclusions regarding optimum scales and film combinations to detect the discolored infestations. Preprocessing of the scanner signals by both analog and digital computers improved the accuracy of target recognition. Selection and ranking of the best channels for signature recognition was the greatest contribution of digital processing. Improvements were made in separating hardwoods from conifers and old-kill pine trees from recent discolored trees and from healthy trees, but accuracy of detecting the green infested trees is still not acceptable on either the SPARC or thermal-contouring processor. From six years of experience in processing line scan data it is clear that the greatest gain in previsual detection of stress will occur when registered multispectral data from a single aperture or common instantaneous field of view scanner system can be collected and processed.

Heller, R. C.↗

The origin and stability of lunar goethite, hematite and magnetite.

Extra-lunar contamination, fumarolic activity, and exposure to oxidizing gases from comet or carbonaceous meteorite impacts have been previously proposed as the causes of magnetite, hematite, and goethite in lunar materials. However, these minerals can occur in the stable low-temperature gas-solid equilibrium assemblages of lunar rocks. Below 600 C magnetite is in equilibrium with C-O-H gases with compositions compatible with high-temperature equilibrium with metallic iron; below 150 C hematite is stable in these same gases. Goethite is not stable in carbonaceous gases at low total pressure, and thus gases from impacting carbonaceous material cannot have produced it. Goethite is stable at low temperatures and pressures in almost pure H2-H2O gases. Its minimum stability against hematite is 2 bars total pressure at 130 C and 0.001 bars at 30 C for H2 to H2O ratios compatible with the high-temperature redox state of lunar materials. Thus the traces of magnetite, hematite, and goethite in lunar materials may be the result of normal low-temperature processes indigenous to the moon and not special processes.

Williams, R. J.↗

Boundary conditions for diffusion in the pack-aluminizing of nickel.

The surface compositions of nickel specimens coated for various lengths of time in aluminizing packs at 2000 F were studied, in order to obtain information about the kinetics of the pack-cementation process in the formation of aluminide coatings. The results obtained indicate that the surface compositions of the coated nickel specimens are independent of time, at least for time between 0.5 and 20 hrs. Another important observation is that the specimens gained weight during the coating process.

Sivakumar, R.↗

Application of computer-aided aircraft design in a multidisciplinary environment.

Applications of a multidisciplinary system of computer programs to selected analytical and optimization problems encountered in an aircraft design are described. The depth of the analyses and optimizations permits such detailed output as individual stringer sizes and pressure distributions. Data flow from one program to another is performed in a hands-off manner in the modular and open-ended system. Numerical examples show how this automation permits multidisciplinary trade-off studies, typical of a preliminary design process to be based on such a level of detail in each discipline that normally would not be available at this stage of the process.

Fulton, R. E.↗

Reactions of HO2 with carbon monoxide and nitric oxide and of O/1 D/ with water.

Investigation of the reactions of the hydroperoxyl radical with carbon monoxide and nitric oxide in a static system, and reexamination of the reaction of O(1 D) with water. The HO2 radicals were generated by the photolysis of N2O at 2139 A in the presence of excess H2O or H2 and smaller amounts of CO and O2. The O(1 D) atoms produced from the photolysis of N2O react with H2O or with H2 to give OH radicals in the case of H2O or OH radicals and H atoms in the case of H2. With H2O, two OH radicals are produced for each O(1 D) removed at low pressures, but the OH yield drops as the pressure is raised. This drop is attributed to an insertion reaction which removes from 10 to 30% of the O(1 D) atoms at about 650 torr of H2O at 200 F. The OH radicals generated can react with either CO or H2 to produce H atoms, which then add to O2 to produce HO2. In the absence of NO, the HO2 radicals could react by two routes, while with NO present NO2 is produced in a long chain process.

Simonaitis, R.↗

Image Display and Manipulation System (IDAMS) program documentation, Appendixes A-D

The IDAMS Processor is a package of task routines and support software that performs convolution filtering, image expansion, fast Fourier transformation, and other operations on a digital image tape. A unique task control card for that program, together with any necessary parameter cards, selects each processing technique to be applied to the input image. A variable number of tasks can be selected for execution by including the proper task and parameter cards in the input deck. An executive maintains control of the run; it initiates execution of each task in turn and handles any necessary error processing.

Cecil, R. W.↗

Acoustic field positioning for containerless processing

The non-contact positioning of materials in a space processing chamber is accomplished using a new type of acoustic levitator. Liquid and solid materials are positioned using a single source of sound. Fine control of position may be obtained by motion of an acoustical reflector. Electrical power required is usually less than 100 watts. The system operates satisfactorily at high and low temperatures and is adaptable as an add-on feature to existing space experiments. Containerless melting and solidification can be performed and a freely suspended liquid can be shaped to the contour of the sound field. Experiments are described in which aluminum, glass and plastic materials are melted and solidified in the containerless state. The system has applications to containerless crystal growth, melting and related processes.

Whymark, R. R.↗

Arc melting and homogenization of ZrC and ZrC + B alloys

A description is given of the methods used to arc-melt and to homogenize near-stoichiometric ZrC and ZrC-boron alloys, giving attention to the oxygen contamination problem. The starting material for the carbide preparation was ZrC powder with an average particle size of 4.6 micron. Pellets weighing approximately 3 g each were prepared at room temperature from the powder by the use of an isostatic press operated at 50,000 psi. These pellets were individually melted in an arc furnace containing a static atmosphere of purified argon. A graphite resistance furnace was used for the homogenization process.

Darolia, R.↗

Diurnal variations of HOx and NOx in the stratosphere

The diurnal variations of odd hydrogen (OH, HO2, H2O2) and odd nitrogen compounds (NO, NO2, HNO3) are investigated by using a one-dimensional time-dependent model containing both chemistry and eddy transport. These variations are discussed in terms of relevant processes.-

Whitten, R. C.↗

Metallographic study of metallic fragment of lunar surface material

A high precision investigation of a metallic fragment from the lunar material returned by the Soviet Luna 16 automatic station revealed three characteristic temperature intervals with different kinetics of solid solution decomposition. The following were found in the structure of the iron-nickel-cobalt alloy: (1) delta-phase and alpha-ferrite of diffusional, displacement origin in the grain boundary and acicular forms; and (2) martensite of isothermal and athermal nature, acicular, lamellar, massive, and dendritic. The diversity of the shapes of structural constituents is associated with the effect on their formation of elastic distortions and various mechanisms of deformation relaxation processes.

Mints, R. I.↗

Accelerations experienced during low-G flight of Black Brant VC (NAS 21.015) on 4 October 1974

This investigation was to determine whether a Black Brant VC (BBVC) sounding rocket equipped with the Goddard Space Flight Center (GSFC) rate control system (RCS) would produce g-levels which are satisfactory for space processing. Accelerations measured by the Marshall Space Flight Center (MSFC) low-g accelerometer system (LGAS) were compared with accelerations calculated from measured payload RCS gyro data during a low-g flight of BBVC NAS 21.015 at White Sands Missile Range, N.M., on October 4, 1974. Accelerations of up to 0.0002 g existed at the LGAS accelerometers from 70 through 420 sec (5.8 min), with the exception of a spike at 101 sec of 0.0004 g which occurred when the RCS was activated the second time. Accelerations of 0.0001 g existed from 140 through 400 sec (4.3 min). Accelerations of 0.0002 g along the roll axis up to 150 sec and of 0.0015 g in the lateral plane at about 135 sec are being investigated by GSFC. They may be associated with leaking thruster valves or a leak in one of the heat pipe experiments. The vehicle rate buildup each time after the RCS nulls out are also being investigated by GSFC. This rate caused most of the 0.0001 g acceleration experienced after 150 sec into the flight. Aerodynamic drag produced no significant accelerations after about 80 sec. The principal conclusion was that the BBVC with the GSFC RCS produces g-levels satisfactory for space processing.

Kissel, R.↗

Difference equation for superradiance

The evolution of a completely excited system of N two-level atoms, distributed over a large region and interacting with all modes of radiation field, is studied. The distinction between r-conserving (RC) and r-nonconserving (RNC) processes is emphasized. Considering the number of photons emitted as the discrete independent variable, the evolution is described by a partial difference equation. Numerical solution of this equation shows the transition from RNC dominance at the beginning to RC dominance later. This is also a transition from incoherent to coherent emission of radiation.

Lee, C. T.↗

Surface compositional mapping by spectral ratioing of ERTS-1 MSS data in the Wind River Basin and Range, Wyoming

The author has identified the following significant results. ERTS data collected in August and October 1972 were processed on digital and special purpose analog recognition computers using ratio enhancement and pattern recognition. Ratios of band-averaged laboratory reflectances of some minerals and rock types known to be in the scene compared favorably with ratios derived from the data by ratio normalization procedures. A single ratio display and density slice of the visible channels of ERTS MSS data, Channel 5/Channel 4 (R5,4), separated the Triassic Chugwater formation (redbeds) from other formations present and may have enhanced iron oxide minerals present at the surface in abundance. Comparison of data sets collected over the same area at two different times of the year by digital processing indicated that spectral variation due to environmental factors was reduced by ratio processing.

Vincent, R. K.↗

Shuttle ground turnaround operations

It is pointed out that a Shuttle turnaround of two weeks will require new innovative and creative ideas for ground operations. The approach selected implements proven techniques and reduces system level checkout as performance confidence is achieved. Details of operational turnaround are discussed, giving attention also to external tank processing, solid rocket booster (SRB) processing, the SRB recovery concept, and payload processing.

Buckley, R. H.↗

Attitude and orbit estimation using stars and landmarks

An extended Kalman filter is used to process line-of-sight measurements to stars and known landmarks providing a statistical indication of performance in estimating spacecraft attitude, orbital ephemeris, and the bias drift of a set of three strapdown gyros. The landmark measurements were assumed to have been taken from the imagery of an Earth-observing multispectral scanner. It is shown that filtering of these noisy measurements results in highly accurate estimates of the above parameters. Results are given showing the sensitivity of performance to various system parameters such as star tracker accuracy, errors in the knowledge of landmark position, and number of stars and landmarks processed.

White, R. L.↗

The human auditory evoked response

Figures are presented of computer-averaged auditory evoked responses (AERs) that point to the existence of a completely endogenous brain event. A series of regular clicks or tones was administered to the ear, and 'odd-balls' of different intensity or frequency respectively were included. Subjects were asked either to ignore the sounds (to read or do something else) or to attend to the stimuli. When they listened and counted the odd-balls, a P3 wave occurred at 300msec after stimulus. When the odd-balls consisted of omitted clicks or tone bursts, a similar response was observed. This could not have come from auditory nerve, but only from cortex. It is evidence of recognition, a conscious process.

Galambos, R.↗

A method for determining the preferred orientation of crystallites normal to a surface

It is pointed out that in principle all of the preferred-orientation information for the direction normal to a surface will be contained in the intensity differences between X-ray diffraction peaks for a sample with a preferred orientation and one with a fully random crystallite orientation. An experimental investigation is discussed along with questions regarding the procedure used in the evaluation process.

Snyder, R. L.↗

Preservation of lunar core samples - Preparation and interpretation of three-dimensional stratigraphic sections

Preservation and analysis of core samples collected from the lunar regolith are discussed. The objectives of core sampling are described together with the core-sampling equipment used in the Apollo program. The effects of disaggregation in core samples are summarized, and ways to preserve the stratigraphy in these samples are reviewed, particularly partial impregnation of samples with polybutyl methacrylate. It is shown that stratigraphic sections preserved in this way reveal individual fragments of the regolith in their original positions, primary and secondary depositional structures related to lunar processes, and the nature and extent of deformations caused by sampling equipment. It is concluded that since the core sedimentary structures indicate complex three-dimensional variations in the regolith, quantitative models of regolith evolution must allow for distinctive local histories as well as irregular reworking and deposition events due to impact processes.

Fryxell, R.↗