Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Guidelines”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 973 records · Page 54
All sourcesNASA NTRSDOE OSTI
NASA NTRS1977

A scientific operations plan for the large space telescope

The paper describes an LST ground system which is compatible with the operational requirements of the LST. The goal of the approach is to minimize the cost of post launch operations without seriously compromising the quality and total throughput of LST science. Attention is given to cost constraints and guidelines, the telemetry operations processing systems (TELOPS), the image processing facility, ground system planning and data flow, and scientific interfaces.

West, D. K.↗
NASA NTRS1976

On the use of two hardening rules of plasticity in incremental and pseudo force analysis

The tangent stiffness and pseudo force forms of the equations of motion are first derived within the context of a total Lagrangian formulation. After a brief discussion of available incremental theory plasticity models, the small strain formulations and computational procedures of the mechanical sublayer model and combined kinematic-isotropic hardening as used in the general purpose structural analysis program AGGIE I are presented. Several sample problems are then presented along with recommended guidelines for use of the two plasticity models.

Hunsaker, B., Jr.↗
NASA NTRS1977

Calorimetric studies of 7000 series aluminum alloys. I - Matrix precipitate characterization of 7075. II - Comparison of 7075, 7050, and RX720 alloys

Correlation between differential scanning calorimetry and high temperature transmission electron microscopy for the characterization of preexisting matrix precipitates in the highest-strength and overaged tempers of 7075 aluminum was demonstrated. The solid state reactions undergone by these tempers in the 20-500 C temperature range were elucidated and expressed in terms of thermodynamic and kinetic parameters. The dissolution parameters for each phase are distinguishable and serve as guidelines for a rapid characterization of the matrix microstructure of these alloys.

Deiasi, R.↗
NASA NTRS1977

An analysis of the Wheeler method for measuring the radiating efficiency of antennas

A model problem is formulated to evaluate the limitations imposed by the assumptions in the Wheeler or cap method for measuring the radiating efficiency of antennas. The antenna in the model is a circular loop and the radiation shield is a spherical metal shell. Calculated values of the actual efficiency of the antenna and the efficiency that would be measured using the Wheeler method are compared to determine the accuracy of the method and set guidelines for its application.

Smith, G. S.↗
NASA NTRS1976

The computer for design and optimization

Computerized design using numerical optimization techniques is discussed and guidelines for writing analysis computer codes that can be readily coupled to optimization codes are presented. The following numerical optimization techniques are examined: random search, sequential unconstrained minimization, direct constrained optimization, and one-dimensional search. A number of design applications are considered including high speed airfoil lift maximization, the preliminary design of a wing, design of a planar tower for optimal geometry, and the conceptual design of a tactical fighter aircraft.

Vanderplaats, G. N.↗
NASA NTRS1978

CMOS bulk-metal design handbook

User's guide describes techniques for generating precision mask artwork for complex CMOS integrated circuits, starting from logic diagram. Techniques are based on standard-cell approach. Guide also includes user guidelines for designing efficient CMOS arrays.

Edge, T. M.↗
NASA NTRS1979

Residential solar-heating system-design package

Design package for modular solar heating system includes performance specifications, design data, installation guidelines, and other information that should be valuable to those interested in system (or similar systems) for projected installation. When installed in insulated "energy saver" home, system can supply large percentage of total energy needs of building.

Source record↗
NASA NTRS1979

Concentrating solar collector-installation package

Report contains general description of concentrating solar collector and tracking system kit, along with comprehensive drawings, instructions, and guidelines to assist in field assembly, installation, operation, and maintenance of system.

Source record↗
NASA NTRS1977

Engine non-containment: UK risk assessment methods

More realistic guideline data must be developed for use in aircraft design in order to comply with recent changes in British civil airworthiness requirements. Unrealistically pessimistic results were obtained when the methodology developed during the Concorde SST certification program was extended to assess catastrophic risks resulting from uncontained engine rotors.

Wallin, J. C.↗
NASA NTRS1977

Fuel system protection

The hazardous nature of most fuels and the potential for catastrophe if ignition should occur was investigated in regard to the design of adequate lightning protection for aircraft fuel systems. Typical aircraft fuel flammability characteristics and possible ways to control fuel flammability and ignition were reviewed. Guidelines for effective protection of fuel systems were delineated.

Franklin A Fisher↗
NASA NTRS1977

Technology requirements for advanced earth-orbital transportation systems

Areas of advanced technology that are either critical or offer significant benefits to the development of future Earth-orbit transportation systems were identified. Technology assessment was based on the application of these technologies to fully reusable, single-stage-to-orbit (SSTO) vehicle concepts with horizontal landing capability. Study guidelines included mission requirements similar to space shuttle, an operational capability begining in 1995, and main propulsion to be advanced hydrogen-fueled rocket engines. Also evaluated was the technical and economic feasibility of this class of SSTO concepts and the comparative features of three operational take-off modes, which were vertical boost, horizontal sled launch, and horizontal take-off with subsequent inflight fueling. Projections of both normal and accelerated technology growth were made. Figures of merit were derived to provide relative rankings of technology areas. The influence of selected accelerated areas on vehicle design and program costs was analyzed by developing near-optimum point designs.

Haefeli, R. C.↗
NASA NTRS1977

Modifying the NASTRAN system with a new capability

The need for a new capability/maintenance interface specification for the NASTRAN system was discussed. Those problems are highlighted which are most difficult to resolve when a new capability is delivered for inclusion into an archive level. The guidelines presented show the objectives of new capability integration as they relate to design and development, delivery, checkout, and documentation. Examples of new capability/maintenance interface already done on an informal basis are presented to illustrate the 'test conditions' of the idea of defining implementation objectives.

Mcdonough, J. R.↗
NASA NTRS1977

Simplified thermal estimation techniques for large space structures

A tool for making rapid estimates of the response of space structures to thermal environments encountered in earth orbits is provided for the designer of these structures. Charts giving heating rates and temperatures for certain typical large spacecraft structural elements are provided. Background information for spacecraft thermal design considerations is presented. Environments, requirements, thermal control techniques, design guidelines, and approaches available for more detailed thermal response analysis are discussed.

Brogren, E. W.↗
NASA NTRS1977

A survey of the status of and philosophies relating to cockpit warning systems

A survey was taken to study current cockpit caution and warning (c/w) systems, and to examine industry philosophies regarding c/w system design including current efforts to improve them. Guidelines currently in use were outlined and those which appear to have general acceptance, those which are considered ineffective or erroneous, and those with which there is broad disagreement as to validity, were delineated. Major airplane manufacturerd were surveyed and a manufacturer dealing specifically with aircraft instrumentation was consulted.

Cooper, G. E.↗
NASA NTRS1977

Multi-calculation rate simulations

It is common in real time simulations of large aerospace systems to separate the high and low frequency subsystems within the simulation and perform the integrations of the subsystems at different calculation rates. This is done to strike a balance between accuracy of calculation and capacity of the digital computer. Questions arising as to the accuracy of this structure compared to single calculation rates were studied using a linear aircraft model. Also investigated were interactions arising to cause errors worse than those expected. Problems are specifically identified and guidelines are given for selection of sample rates for multiple rate simulations.

Powell, J. D.↗
NASA NTRS1977

The Feasibility of Establishing Operational Water Hyacinth-Based Systems at the Treatment Facilities of Existing Cities

The wastewater treatment facilities of three communities in southern Florida and two in southern Texas areas having populations of 20,000 or fewer persons were surveyed to determine: (1) their performance characteristics and the nature of their customers; (2) facility upgrading requirements needed to meet current and future EPA and State standards; (3) their adaptability to water hyacinth utilization and harvested plant disposal; and (4) the level of community support. Guidelines for site selection were established and applied to five cities in Texas and four in Florida. An evaluation of the prospective sites reveals that the Florida locations are generally unsuitable for implementation of water hyacinth based systems because of regulatory philosophy. All five Texas sites have excellent potential.

Source record↗
NASA NTRS1978

The effects of eccentricities on the fracture of off-axis fiber composites

Finite element analyses were performed to investigate theoretically the effects of in-plane and out-of-plane eccentricities, bending or twisting, and thickness nonuniformity on the axial stress and strain variations across the width of off-axis specimens. The results are compared with measured data and are also used to assess the effects of these eccentricities on the fracture stress of off-axis fiber composites. Guidelines for detecting and minimizing the presence of eccentricities are described.

Chamis, C. C.↗