Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “CORRELATIONS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 973 records · Page 54

Reactive nitrogen and its correlation with ozone in the lower stratosphere and upper troposphere

High resolution in situ measurements of reactive nitrogen (NO(y)) and O3 were made in the upper troposphere and lower stratosphere at a variety of latitudes and seasons. In the lower stratosphere, NO(y) and O3 are very highly positively correlated at all times and spatial scales sampled. The ratio NO(y)/NO3 is much less variable than either species measured separately. The ratio has a much weaker gradient with altitude than the mixing ratios of O3 or NO(y). The ratio is smaller and decreases more rapidly with altitude in the tropics than at midlatitudes. In the upper troposphere NO(y) and O3 are only weakly correlated. Their ratio in the tropical upper troposphere is about 0.005-0.025 and the ratio in the midlatitude upper troposphere is about 0.004-0.010. The NO(y) in the upper troposhere is probably partly due to lightning.

Murphy, D. M.↗

High-speed joint-transform optical image correlator using GaAs/AlGaAs semi-insulating multiple quantum wells and diode lasers

We demonstrate a compact real-time optical image correlator using diode lasers and a semi-insulating GaAs/AlGaAs multiple-quantum-well (SI-MQW) device as the holographic element. With only 3 mW of power incident upon the SI-MQW device, the correlation is obtained in 1 microsec and can be erased in as fast as 2 microsec, which presents the possibility of a system capable of 3 x 10 exp 5 correlations/s. We also show that images can be stored for a controllable length of time (2-25 microsec), which presents possibilities for the use of the SI-MQW device as a data or image buffer memory.

Partovi, A.↗

Airborne eddy correlation gas flux measurements - Design criteria for optical techniques

Although several methods exist for the determination of the flux of an atmospheric species, the airborne eddy correlation method has the advantage of providing direct flux measurements that are representative of regional spatial domains. The design criteria pertinent to the construction of chemical instrumentation suitable for use in airborne eddy correlation flux measurements are discussed. A brief overview of the advantages and limitations of the current instrumentation used to obtain flux measurements for CO, CH4, O3, CO2, and water vapor are given. The intended height of the measurement within the convective boundary layer is also shown to be an important design criteria. The sensitivity, or resolution, which is required in the measurement of a scalar species to obtain an adequate species flux measurement is discussed. The relationship between the species flux resolution and the more commonly stated instrumental resolution is developed and it is shown that the standard error of the flux estimate is a complicated function of the atmospheric variability and the averaging time that is used. The use of the recently proposed intermittent sampling method to determine the species flux is examined. The application of this technique may provide an opportunity to expand the suite of trace gases for which direct flux measurements are possible.

Ritter, John A.↗

Statistical fitting accuracy in photon correlation spectroscopy

Continuing our experimental investigation of the fitting accuracy associated with photon correlation spectroscopy, we collect 150 correlograms of light scattered at 90 deg from a thermostated sample of 91-nm-diameter, polystyrene latex spheres in water. The correlograms are taken with two correlators: one with linearly spaced channels and one with geometrically spaced channels. Decay rates are extracted from the single-exponential correlograms with both nonlinear least-squares fits and second-order cumulant fits. We make several statistical comparisons between the two fitting techniques and verify an earlier result that there is no sample-time dependence in the decay rate errors. We find, however, that the two fitting techniques give decay rates that differ by 1 percent.

Shaumeyer, J. N.↗

Optimal binary phase and amplitude correlation filters for polarization-rotating spatial light modulators

We investigate the optimal designs of binary phase and amplitude filters (BPAFs) for the key correlation metrics of peak intensity, peak-to-correlation energy, SNR, and discrimination. These filters may be implemented on binary polarization-rotating spatial light modulators. We present simulation results comparing performance to conventional binary phase-only filters (BPOFs) and illustrating trade-offs between the different performance criteria in terms of the filter design parameter. We also extend the generalization to three-level phase and amplitude filters with a nonzero region of support and demonstrate that optimal three-level BPAFs can provide clearly superior performance to optimal three-level BPOFs.

Downie, John D.↗

A tight correlation between radio and X-ray luminosities of M dwarfs

We present results of a survey of nonflare radio and X-ray properties of dM/dMe stars. This survey was obtained during the ROSAT All-Sky Survey and is accompanied by mostly simultaneous VLA observations. We find that the X-ray and radio luminosities are correlated over three orders of magnitude, L(R) is proportional to L(X), irrespective of spectral type. This result improves if strictly simultaneous observations are considered. This correlation points to a physical relation between the particle populations responsible for the two emissions.

Gudel, Manuel↗

Correlation of Forced-convection Heat-transfer Data for Air Flowing in Smooth Platinum Tube with Long-approach Entrance at High Surface and Inlet-air Temperatures

A heat-transfer investigation was conducted with air in an electrically heated platinum tube with long-approach entrance, inside diameter of 0.525 inch, and effective heat-transfer length of 24 inches over ranges of Reynolds number up to 320,000, average inside-tube-wall temperature up to 3053 degrees R, and inlet-air temperature up to 1165 degrees R. Correlation of data by the conventional Nusselt relation resulted in separation of data with tube-wall temperature. Good correlation was obtained, however, by use of a modified Reynolds number.

Desmon, Leland G↗

A Correlation by Means of the Transonic Similarity Rules of the Experimentally Determined Characteristics of 22 Rectangular Wings of Symmetrical Profile

The transonic similarity rules have been applied to the correlation of experimental data for a series of 22 rectangular wings having symmetrical NACA 63A-series sections, aspect ratios from 1/2 to 6, and thicknesses from 2 to 10 percent. The data were obtained by use of the transonic bump technique over a Mach number range from 0.40 to 1.10, corresponding to a Reynolds number range from 1.25 to 2.05 million. The results show that it is possible to correlate experimental data throughout the subsonic, transonic, and moderate supersonic regimes by using the transonic similarity parameters in forms which are consistent with the Prandtl-Glauert rule of linearized theory. The multiple families of basic data curves for the various aspect ratios and thickness ratios have been summarized in single presentations involving only one geometric variable - the product of the aspect ratio and the l/3 power of the thickness ratio.

Mcdevitt, John B↗

Correlation of Cooling Data from an Air-Cooled Cylinder and Several Multicylinder Engines

The theory of engine-cylinder cooling developed in a previous report was further substantiated by data obtained on a cylinder from a Wright r-1820-g engine. Equations are presented for the average head and barrel temperatures of this cylinder as functions of the engine and the cooling conditions. These equations are utilized to calculate the variation in cylinder temperature with altitude for level flight and climb. A method is presented for correlating average head and barrel temperatures and temperatures at individual points on the head and the barrel obtained on the test stand and in flight. The method is applied to the correlation and the comparison of data obtained on a number of service engines. Data are presented showing the variation of cylinder temperature with time when the power and the cooling pressure drop are suddenly changed.

Pinkel, Benjamin↗

Correlation of the Characteristics of Single-Cylinder and Flight Engines in Tests of High-Performance Fuels in an Air-Cooled Engine I : Cooling Characteristics

Variable charge-air flow, cooling-air pressure drop, and fuel-air ration investigations were conducted to determine the cooling characteristics of a full-scale air-cooled single cylinder on a CUE setup. The data are compared with similar data that were available for the same model multicylinder engine tested in flight in a four-engine airplane. The cylinder-head cooling correlations were the same for both the single-cylinder and the flight engine. The cooling correlations for the barrels differed slightly in that the barrel of the single-cylinder engine runs cooler than the barrel of te flight engine for the same head temperatures and engine conditions.

Wilson, Robert W.↗

Optical Correlator Performs Novelty Filtering

Experimental real-time optical correlator performs correlation and novelty filtering in photorefractive crystal. Crystal oriented enabling cross-polarization diffraction: together with polarizing beam splitter, increases signal-to-noise ratio. Laser and optical components expand, collimate, and divide laser beam.

Liu, Duncan Tsuen-Hsi↗

A high speed CMOS correlator

A full custom, 25 MHz, 1.6 microns CMOS Correlator chip is presented. The 5.15mm by 4.23mm chip performs either autocorrelation or crosscorrelation, consuming less than 10mW per channel. The correlator, designed for a space borne spectrometer, contains 32 channels. The 24 bit accumulator registers can be read independent of the input data path, in either 8 bit bytes, or 16 bit words. The device is cascadable and allows integration periods of up to 1.78 seconds, at 25 Megasamples/second. The controllers, for the input data path and the data output section, are implemented with Sequence Invariant State Machines.

Canaris, J.↗

Correlated states of a quantum oscillator acted by short pulses

Correlated squeezed states for a quantum oscillator are constructed based on the method of quantum integrals of motion. The quantum oscillator is acted upon by short duration pulses. Three delta-kickings of frequency are used to model the pulses' dependence upon the time aspects of the frequency of the oscillator. Additionally, the correlation coefficient and quantum variances of operations of coordinates and momenta are written in explicit form.

Manko, O. V.↗

Si-29 NMR spectroscopy of naturally-shocked quartz from Meteor Crater, Arizona: Correlation to Kieffer's classification scheme

We have applied solid state Si-29 nuclear magnetic resonance (NMR) spectroscopy to five naturally-shocked Coconino Sandstone samples from Meteor Crater, Arizona, with the goal of examining possible correlations between NMR spectral characteristics and shock level. This work follows our observation of a strong correlation between the width of a Si-29 resonance and peak shock pressure for experimentally shocked quartz powders. The peak width increase is due to the shock-induced formation of amorphous silica, which increases as a function of shock pressure over the range that we studied (7.5 to 22 GPa). The Coconino Sandstone spectra are in excellent agreement with the classification scheme of Kieffer in terms of presence and approximate abundances of quartz, coesite, stishovite, and glass. We also observe a new resonance in two moderately shocked samples that we have tentatively identified with silicon in tetrahedra with one hydroxyl group in a densified form of amorphous silica.

Boslough, M. B.↗

Formal specification of a high speed CMOS correlator

The formal specification of a high speed CMOS correlator is presented. The specification gives the high-level behavior of the correlator and provides a clear, unambiguous description of the high-level architecture of the device.

Windley, P. J.↗

NASA SERC digital correlator projects

Interest in custom digital correlator processors is growing, in both the radio astronomy and earth sensing communities, as scientists realize that VLSI technology is available to them. This paper presents three digital correlator projects currently underway at the NASA SERC for VLSI Systems Design. The projects are as follows: a 60MHz chip for the ESTAR satellite; a 100MHz, 1024 channel autocorrelator; and a 64 MHz, VLSI system consisting of 8 32- channel complex crosscorrelators including phase rotators.

Canaris, John↗

A 1 GHz sample rate, 256-channel, 1-bit quantization, CMOS, digital correlator chip

This paper describes the development of a digital correlator chip with the following features: 1 Giga-sample/second; 256 channels; 1-bit quantization; 32-bit counters providing up to 4 seconds integration time at 1 GHz; and very low power dissipation per channel. The improvements in the performance-to-cost ratio of the digital correlator chip are achieved with a combination of systolic architecture, novel pipelined differential logic circuits, and standard 1.0 micron CMOS process.

Timoc, C.↗

Structure in gamma ray burst time profiles: Correlations with other observables

One of the current debates raging in the world of gamma-ray burst physics is whether the sources of these enigmatic bursts arise from a single or from multiple distributions. Several authors contend that the histograms of GRB observables imply the latter. The two most-likely candidate components are galactic and cosmological. For example, some researchers claim that a dip in the V/V max distribution is a result of such a two-component source distribution. Others have used a parameter called the 'burst variability' calculated by dividing the maximum count rate on the 64-msec timescale by that from the 1024-msec timescale to show that a correlation of this parameter with bursts brightness implies a two-component model. This method has met vigorous criticism. We have developed two parameters that measure the variability or structure in the time profiles of BATSE gamma-ray bursts. Both parameters ('structure' and 'spike height') are based on the statistics of 'runs up' and 'runs down.' In short, the structure parameter is the observed number of runs (at several lengths) minus the number expected in a chance distribution. The 'spike height' is the sum of all run heights minus the expected sum. These two are straight-forward to calculate, robust, and measure the variability over the complete profile--not just at the peak. We have applied this algorithm to the profiles of 156 GRB's. In this paper we present graphs of the two parameters as functions of the following: (1) burst duration, (2) burst hardness ratio, (3) V/V max, (4) source galactic longitude, and (5) source galactic latitude. We seek correlations as well as groupings in the data that might indicate a multi-component source distribution.

Lestrade, John Patrick↗