SEARCH · Engineering Papers

Results for “Battery”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 973 records · Page 54

All sources NASA NTRS DOE OSTI

NASA NTRS2018

Trends in 18650 Lithium-Ion Battery Cell Safety for Spacecraft Applications

Highly popular due to their high energy density lithium-ion battery cells have increased in energy density approximately 2.5 times since their commercial debut in 1991. As a result, the hazard severity of a sudden inadvertent release of stored energy has greatly increased. The high energy density of lithium-ion battery cells coupled with the flammable toxic electrolytes they contain and unique failure modes can lead to a potentially catastrophic thermal runaway. This can result in spewing flames even while setting on a shelf unused. The metal oxide cathodes in lithium-ion battery cells can release their oxygen into the cells when they overheat. There is enough oxygen contained in the metal oxide cathodes to combust up to 20 percent of the electrolytes in the cells without any outside oxygen sources. These cells can therefore be viewed as miniature rocket motors capable of venting a considerable blow-torch type flame and up to 2.5 liters of hot flammable toxic gases per cell. This presents special challenges for spaceflight safety. In this paper we will examine roots causes of 18650 lithium-ion battery cell failures and how to best mitigate them at the cell and battery assembly levels. We will also look at some promising future trends that could yield both much greater stored energy and safety.

Allison, Gregory H.↗

NASA NTRS2018

X-57 Maxwell Battery from Cell Level to System Level Design and Testing

The X-57 Maxwell flight demonstrator aircraft is an experimental aircraft designed to demonstrate radically improved aircraft efficiency with a 3.5 times aero-propulsive efficiency gain at a "high-speed cruise" flight condition for comparable general aviation aircraft. These gains are enabled by integrating the design of a new, optimized wing and a new electric propulsion system. There are 14 propulsors in all: 12 high lift motor that are only active during takeoff and climb, and 2 larger motors positioned on the wingtips that operate over the entire mission. The innovative electric propulsion system will have as its primary power a Li-ion battery system. Integrating a battery system into this innovative design poses unique challenges that require careful design considerations across the system. The presentation will cover a breakout of X-57 battery specifications, battery design and lessons learned when designing a high voltage battery system to power electrified aircrafts.

Hernandez Lugo, Dionne↗

NASA NTRS2018

On-Board Battery Monitoring and Prognostics for Electric-Propulsion Aircraft

The reliability of the propulsion system of an aircraft is paramount for the aircraft safety and hence the aircraft health must be monitored continuously. In contrast to fuel- operated aircraft, electric battery-operated propulsion system poses specific problems, such as, the remaining battery power does not linearly decrease and cannot be measured directly. In this paper, we describe a combined monitoring and prognostics architecture that can continuously monitor all components of the electric propulsion system with respect to safety and performance properties as well as state of charge and rest of useful life for the battery. Our system combines a detailed electrochemical battery model for Li-ion batteries with a powerful prognostics engine based upon an Unscented Kalman Filter with the R2U2 monitoring device, which provides efficient observers for metric temporal logic and Bayesian reasoning. R2U2 is a real-time, realizable, responsive, unobtrusive unit, which continuously monitors sensor readings, outputs of the prognostics engine, as well as the ight software status for safety, performance, and security properties. We illustrate our architecture with two case studies, one reporting actual ight tests with an X8+ octocopter and the other a software-in-the-loop simulation with an unmanned Edge 540 electric aircraft model.

Kulkarni, Chetan↗

NASA NTRS2019

A Multi-Physics Study on High-Specific Power Li-O2 Batteries for Electric Aircraft

Commercialization of lithium-air batteries faces many challenges, such as electrolyte decomposition, short cycle life, low energy and power density, etc. However, commercialization of Li-O2 batteries for aeronautics is much more challenging due to additional safety constraints on cyclability and performance (high specific power and specific energy). For this presentation, we will discuss inter-related aspects of physics-based modeling of a pack: cell and battery model calibration. In addition, we will evaluate and present optimal battery designs for high discharge current density, high discharge time, and low battery mass using simulation-based optimization.The Finite Element Model (FEM) used to simulate a Li-O2 cell is based on the work of Bevara [1]. The different aspects of the model are based on: porous electrode theory and concentrated electrolyte theory; quantum tunneling model for the resistance of conformal layer of discharge product (Li2O2) [1]; Butler-Volmer kinetics for electrochemical reaction; Fick's diffusion for oxygen transport; and an oxygen dissolution model is applied at the air/electrolyte interface [2]. The electrolyte properties such as ion conductivity, ion diffusion, oxygen diffusion, and mass density of the electrolyte were taken from Molecular Dynamics (MD) simulations [3]; while the other model parameters, which includes mass of cell components, were calibrated to match experiments at high discharge current densities. The cell mass includes the anode, cathode, separator, electrolyte, and other components (such as current collector). This calibrated model is used to perform parametric studies on cathode thickness, porosity, tortuosity, carbon particle size, electrolyte transport and material properties, partial pressure of oxygen, discharge time, and discharge current density to study optimal designs for high specific power and energy. References:1. Bevara, V. & Andrei, P. (2014), J. Electrochem. Soc. 161 (14), A2068-A2079.2.Mehta, M. & Andrei, P. (2015), J. Power Sources. 286, 299-308.3.Liyana-Arachchi, T.; Haskins, J.; Burke, C.; Diederichsen, K.; McCloskey, B.; & Lawson, J. (2018), J. Phys. Chem. B. 122 (36), 8548 - 8559.4.Choi, W.; Kikumoto, H.; Choudhary, R. & Ooka, R. (2018), Applied Energy, 209, 306-321.

Mehta, Mohit↗

NASA NTRSDate not supplied

Sensor-based Prognostics for Safe Batteries for Electric Aircraft

With a new start awarded under CAS for Fiscal Year 2020, the Sensor-based Prognostics to Avoid Runaway Reactions and Catastrophic Ignition project, or SPARRCI, aims to eliminate safety risks of lithium-ion and next-generation lithium-based batteries. SPARRCI is taking a deeper dive into the inner workings of battery cells by introducing miniature multifunctional sensors within the cells to detect early signs of failure. Combined with nondestructive evaluation techniques to gather complementary battery health data, battery data will be monitored in real-time via prognostics which will ultimately be able to identify when the cell is exhibiting abnormal behavior bordering on failure, with the ability to provide early warning such that the battery may be taken offline prior to catastrophic failure events.

Brianne Demattia↗

NASA NTRSDate not supplied

A Multiphysics Study to Improve Specific Energy of Primary Batteries for Low Temperature Operation for Deep Space Missions

Several lander missions on the outer planets such as Europa, Enceladus, and Titan require electrical power to operate scientific and communication equipment. The traditional power generation methods, such as a photovoltaic array, are not feasible as their efficiency drops significantly at these vast distances. The novel radioisotope power systems are not practical today based on current lander designs and the effectiveness of these systems. To perform in situ science on distant planets, a high specific energy battery (>700 Wh/kg) needs to operate for about 480 hours under cold temperatures (-40C or 0C) [1]. While a primary battery such as Li-CFx can provide high specific energy at room temperature, its specific capacity decreases significantly at low temperatures. One of the causes for this drop is low ion and electrical conductivity, and slower reaction kinetics. Slower transport and facile kinetics lead to an increase in the battery’s resistance and higher voltage drops during the cell operation, thus reducing specific capacity. Both the transport and kinetics show a strong dependence on temperature. Thus, a small temperature rise can lead to an increase in the reaction rate and ion conductivity; since the temperature, cell resistance, and specific capacity are interdependent. A conventional battery model accounts for ohmic, thermodynamic, and, electrochemical, and chemical decomposition heating. The ohmic heating can be controlled by designing a resistive microstructure and varying the ratios of the active materials [2]. The kinetics can be improved by increasing the surface area, reducing the particle size, or adding a catalyst. These parameters are often optimized to achieve high specific energy at room temperatures. A similar optimization study is not available at low temperatures and for a primary (high specific energy) battery. For this presentation, we will explore the effect of geometrical, microstructural, and material properties on optimal specific capacity at low temperatures through multiphysics simulations. The ion transport resistance depends on the porosity and the tortuosity of an electrode and the separator.

M. Mehta↗

NASA NTRS2021

Design and Development of Nano-electro Fuel Batteries and Rim-driven Motors for Electrified Aircraft Applications

The National Aeronautics and Space Administration Convergent Aeronautics Solutions project seeks to determine feasibility of emerging technologies in aeronautics. The Aqueous, QUick-Charging Battery Integration For Electric flight Research study pursued the feasibility of nano-electro fuel and rim-driven motor technologies integrated together for aircraft implementation. Development of the NEF technology was in partnership with Influit Energy, LLC (Chicago, Illinois). A rim-driven motor, designed by the project team, sized to represent one of 24 motors in the propulsion system of the tandem electric super-short takeoff and landing aircraft is discussed. The development of this electric super-short takeoff and landing concept was in partnership with The Boeing Company (Chicago, Illinois). The integrated system design of the nano-electro fuel and rim-driven motor technologies within the wing section was in partnership with Empirical Systems Aerospace, Inc. (ESAero) (San Luis Obispo, California). The feasibility benchmark for the nano-electro fuel battery was to attain 100 mA/sq. cm within two years, a 50-fold increase over the demonstrated cell performance before the Convergent Aeronautics Solutions Aqueous, QUick-Charging Battery Integration For Electric flight Research activity. The team achieved 85 mA/sq. cm in the nano-electro fuel flow cell at the end of the two years. The Aqueous, QUick-Charging Battery Integration For Electric flight Research project team determined the technology to be both inflammable and nonexplosive (unless multiple, simultaneous system failures occur) which would provide a safer alternative to conventional lithium-ion based battery systems.

Kurt V. Papathakis↗

NASA NTRSDate not supplied

Battery Key Performance Projections based on Historical Trends and Chemistries

Recent improvements in state-of-the-art (SOA) batteries driven by the automotive sector have led to many electrified aircraft concepts choosing batteries as the preferred energy-storage method. Current SOA batteries are at the point of enabling certain hybrid and all-electric aircraft, particularly small, short range, lower speed aircraft. Higher performance batteries improve aircraft range and can enable larger, higher speed aircraft. In this work, we develop specific energy projections for future electrified aircraft. The projections are developed based on examining historical commercial SOA trends as well as practical limitations of future chemistries. Accurate projections of future specific energy values are important for estimating the timeline for commercial introduction of electrified aircraft. This work estimates nominal cell level specific energies for rechargeable batteries of 489 Wh/kg by 2030, 638 Wh/kg by 2040, and 764 Wh/kg by 2050. More conservative as well as more aggressive estimates are also provided.

Blake Tiede↗

NASA NTRSDate not supplied

Artemis Vehicle Battery Requirements and Processes

- Purpose: - Give an overview of cells, batteries and design features for safety - Show what the hazards are for flying batteries in crewed space vehicles - Show how to control the hazards of batteries and verify that they are functioning as expected - Contact Information - Success of batteries being approved for flight is improved by talking with JSC Battery Safety Group early in the development of hardware

Renee Coe Weber↗

NASA NTRSDate not supplied

The Cognition Battery: Developing a Normative Database for Spaceflight and Examining the Impact of Prolonged Isolation and Confinement on Cognitive Performance

INTRODUCTION: Astronauts on future long duration space exploration will be required to execute complex tasks in which even minor errors could have devastating consequences. Intact cognition is critical to maintain exceptional performance standards and it is possible that variability even at the highest ends of the performance spectrum will impact operational tasks. Exposure to spaceflight hazards could compromise cognitive performance, and decrements have been documented under conditions of altered gravity and radiation exposure. The cognitive impacts of prolonged isolation and confinement remain relatively unknown. Traditional neuropsychological assessments cannot support earth independent monitoring, do not have normative comparisons for high functioning individuals, and most are not sensitive enough to detect small performance decrements. The Cognition Battery was developed to address these limitations but currently lacks comprehensive normative data. In this project, we aimed to 1) develop a preliminary normative database for astronauts and astronaut surrogates using the Cognition Battery, and 2) characterize differences in cognitive performance after short and long duration analog missions. PARTICIPANTS & METHODS: We assessed baseline cognitive performance by administering the Cognition Battery to 97 astronaut and astronaut surrogates recruited to approximate astronaut demographics (mean age: 39.38, SD=7.62; 35.1% female; 91.7% advanced degrees). For aim 1, we calculated speed and accuracy outcomes for each subtest and summarized the data with descriptive statistics. We examined the relationship between age and performance with Pearsons’s correlations and the relationship between gender and performance with independent samples t-tests. A subset of individuals on short duration (n=48; mean age: 38.18, SD=7.14; 37.5% female; 91.7% advanced degrees) missions of 45 days and long duration (n=34; mean age: 42.12, SD=8.39; 38.2% female; 94.1% advanced degrees) missions ranging from 4-8 months were administered the Cognition Battery during and after their respective missions. For aim 2, we accounted for practice effects using published corrections, and z-transformed post-mission scores using the full sample’s baseline scores. One-way analysis of covariance tests determined the main effect of analog duration on post-mission performance, after accounting for age and gender. The False Discovery Rate method was applied to adjust for multiple comparisons. RESULTS: In the full normative sample, older age was associated with slower reaction times on a processing speed task (r=.39, p=.02), and men were more accurate on processing speed (t=-2.19, p=.03) and faster on sustained attention (t=2.02, p=.049) and risk-taking tasks (t=2.49, p=.02). We observed a main effect of duration on performance on tasks of visual memory (f(1)=5.62, p=.04), processing speed (f(1)=5.48, p=.03), and sensorimotor functioning (f(1)=39.52, p < .001), such that slower performance was observed after long duration missions relative to short. Only sensorimotor functioning was significant after adjustments for multiple comparisons (adjusted p<.001). DISCUSSION: The full sample represents the largest dataset of cognitive performance assessed by the Cognition Battery available and can be used for further research in spaceflight and high-performance populations. Relationships between performance and key demographic variables suggest future research that include age and gender stratification is needed. Our results also show minimal changes in cognitive performance between longer and shorter periods of isolation and confinement.

S I Dev↗

NASA NTRS2026

Highly Porous Polyimide Gel for Use as Battery Separator with Room Temperature Ionic Liquid Electrolytes

Advanced aerospace vehicular concepts require advances in many existing technologies, including space power and energy storage systems. Batteries represent one of the major areas in need of improvement, both in terms of energy density and safety, with growing concerns over the fire safety of commercial lithium-ion batteries. This has prompted efforts to develop nonflammable battery components, namely the electrolyte and separator. Existing commercial lithium-ion batteries utilize polyolefin microporous membranes as separators with an electrolyte consisting of a lithium salt dissolved in a mixture of cyclic carbonate solvents. This separator/electrolyte combination has ionic conductivities in the range of 10 −2 to 10 −3 S/cm. However, the cyclic carbonate solvents are inherently flammable. Room-temperature ionic liquids (RTILs) appear to be a safer alternative. They offer good ionic conductivities and are inherently nonvolatile and nonflammable, giving them a safety advantage. However, many promising RTILs for battery electrolytes are not compatible with commercial polyolefin separator materials. Alternative separator materials, such as polyimides, are non-flammable and are capable of accepting RTILs into their structure. Polyimide gels, with a composition of 4,4′-oxydianiline, 3,3′,4,4′-tetracarboxylic dianhydride and cross-linked with Desmodur N3300A, possess an open-porous, fibrillar network architecture which offers a high degree of porosity (typically greater than 85% porosity) for lithium-ion transport and conduction, as well as good mechanical properties. Furthermore, these polyimide gels are compatible with selected imidazolium-based RTILs. Nonflammable separator/electrolyte systems with room-temperature conductivities in the range of 10 −3 S/cm have been evaluated. It has been demonstrated that 1-ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide was the most promising among six RTILs screened, in terms of both ionic conductivity and constant current cycling.

Polyimide↗

DOE OSTI2020

Electrolytes for iron flow battery

A method of operating an iron redox flow battery system may comprise fluidly coupling a plating electrode of an iron redox flow battery cell to a plating electrolyte; fluidly coupling a redox electrode of the iron redox flow battery cell to a redox electrolyte; fluidly coupling a ductile plating additive to one or both of the plating electrolyte and the redox electrolyte; and increasing an amount of the ductile plating additive to the plating electrolyte in response to an increase in the plating stress at the plating electrode. In this way, ductile Fe can be plated on the negative electrode, and the performance, reliability and efficiency of the iron redox flow battery can be maintained. In addition, iron can be more rapidly produced and plated at the plating electrode, thereby achieving a higher charging rate for all iron flow batteries.

25 ENERGY STORAGE↗

DOE OSTI2020

Ghostbusters for Batteries

End-of-life lithium-ion batteries are Class 9 hazardous materials due to flammability of electrolyte and lithium. It is why the transportation cost ranges from $2.49/kg - $7.20/kg for civilian and defense disposition, that is over 50% of the cost of recycling. Damaged batteries have many times greater transportation cost. Dead batteries require costly bunker-storage that occupies real estate and personnel that could be used for productive purposes. Insurance is expensive and accidents are almost assured even with relatively low volumes of waste. Tipping fees on top of this adds an unpredictable, inflated cost for the EV industry, which is very cost sensitive for survival. Transforming lithium-ion into a class of non-hazardous material reduces transportation cost to $0.10/kg, providing a value opportunity of ~$2/kg to ~$6/kg for civilian and defense disposition respectively. OnTo can eliminate the risk of thermal runaway with a brief, non-toxic treatment to eliminate flammability and toxic risks in most any battery, except Pb, which is inherently toxic. With the service, OnTo also can provide rigorous certainty that cells are rendered inert. OnTo’s patented and patent pending deactivation technology improves the cost and safety for disposition of end-of-life lithium-ion battery packs and cells. Deactivation uses non-toxic chemical processing to remove inherent risks in lithium-ion and other primary and secondary chemistries. The technology has been demonstrated and developed through DOE contract with OnTo Technology LLC (EE0008475).

25 ENERGY STORAGE↗

DOE OSTI2020

Conformal graphene cage encapsulated battery electrode materials and methods of forming thereof

A conformal graphene-encapsulated battery electrode material is formed by: (1) coating a battery electrode material with a metal catalyst to form a metal catalyst-coated battery electrode material; (2) growing graphene on the metal catalyst-coated battery electrode material to form a graphene cage encapsulating the metal catalyst-coated battery electrode material; and (3) at least partially removing the metal catalyst to form a void inside the graphene cage.

Li, Yuzhang↗

DOE OSTI2021

Stripline detector for in situ battery NMR

Provided are batteries and fuel cells incorporating a stripline detector for use in nuclear magnetic resonance (NMR). The stripline batteries and fuel cells can be used for in situ NMR measurement of battery or fuel cell chemistry. Also provided are methods for measuring in situ battery and fuel cell NMR using the stripline batteries and fuel cells of the invention.

Tong, YuYe J.↗

DOE OSTI2022

Characterizing Dynamic Structure in Battery Electrodes by Time-Resolved Cryo-TEM

In recent years, cryogenic transmission electron microscopy (cryo-TEM) has enabled high-resolution characterization of sensitive battery materials by minimizing electron beam-induced artifacts and damage. Success of this technique relies on the preparation of thin, rapidly frozen samples, generally by disassembling batteries under inert atmosphere, transferring materials of interest to a TEM grid, and finally plunge freezing into a cryogen. In material degradation studies, this extensive time between electrochemical cycling and cryo-TEM characterization leaves room for structural relaxation, diffusion, and other dynamic processes that make it difficult to precisely correlate the imaged structure with the native structure that evolves during battery cycling or aging. Here, we present a method to integrate battery cycling with fast preparation of electrode samples for cryo-TEM. This enables higher fidelity between the structures characterized and the electrochemical state of interest, which we use to study deformation in silicon nanoparticle anodes for lithium-ion batteries.

CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSICS↗

DOE OSTI2022

Stripline detector for in situ battery and fuel cell NMR

Tong, YuYe J.↗

DOE OSTI2023

Solid oxide metal-air redox batteries (SOMARB)

The solid oxide metal-air redox batteries (SOMARB), composed of reversible solid oxide fuel cell (RSOFC) and energy storage unit (ESU), is an emerging technology for large-scale energy storage owing to its advantages in high energy density, high rate capability, decoupled energy and power components, all solid state structure, high safety and scalability. Starting with introducing the working principle of this battery, thermodynamics and kinetics, and battery chemistries based on Fe, Mo, and Wo of SOMARB are illustrated. The strategies to improve the performance of Fe-based SOMARB via optimizing RSOFC and ESU are discussed in detail. Finally, several high temperature metal-air batteries derived from SOMARB are introduced. The comparison with other batteries shows that SOMARB is expected to play an important role in future grid and renewable energy storage with concurrent advances in SOFC stack and system design.

Zhang, Cuijuan↗