Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “targeted”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 955 records · Page 53

Influence of prepulse plasma formation on neutron production from the laser-target interaction

The interaction of an intense ultrashort pulse laser with a planar uniform target was studied with a two-dimensional relativistic electromagnetic particle-in-cell method to determine the acceleration of deuterons and production of neutrons. A Au-CD{sub 2} double-layer planar target with thickness of {approx}1 {mu}m and a preplasma of variable length was used to generate high-energy deuterons as a precursor for neutron production. The deuteron energy and angular distributions and the neutron production from D(d,n)-{sup 3}He nuclear fusion reactions were studied as a function of the preplasma scale length and target thickness. For very thin (submicron) targets the preplasma increases the neutron yield only marginally, but for realistic targets with thickness of a few microns the preplasma enhances the neutron yield by two orders of magnitude. Both the average deuteron energy and neutron yield peak at an optimum preplasma scale length L{sub p}{sup opt}{approx_equal}1/k{sub 0} (k{sub 0} laser wave vector), which is of the order of one inverse laser wave vector.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Observation of Quasi Mono-Energetic Protons in Laser Spray-Target Interaction

Laser driven ion acceleration arises from charge separation effects caused by an ultrahigh intensity laser pulse. Limited mass targets confine the accelerated electrons within the target size and prevent the large area spreading seen in extended foil targets. Furthermore, if the target size is smaller than the laser wavelength and focal spot diameter, homogeneous heating of the target is ensured. Observation of quasi-monoenergetic protons in the interaction of a high intensity high contrast laser pulse at 5x10{sup 19} W/cm{sup 2} with 150 nm--diameter water droplets is investigated. An ensemble of such objects is formed in a spray. Quasi mono energetic proton bursts of energy Eapprox1.6 MeV are observed and are associated with a specific ionization and explosion dynamics of the spheres.

43 PARTICLE ACCELERATORS↗

Physical thickness characterization of the FRIB production targets

The FRIB heavy-ion accelerator, commissioned in 2022, is a leading facility for producing rare isotope beams (RIBs) and exploring nuclei beyond the limits of stability. These RIBs are produced via reactions between stable primary beams and a graphite target. Approximately 20–40% of the primary beam power is deposited in the target, requiring efficient thermal dissipation. Currently, FRIB operates with a primary beam power of up to 20 kW. To enhance thermal dissipation efficiency, a single-slice rotating graphite target with a diameter of approximately 30 cm is employed. The effective target region is a 1 cm-wide outer rim of the graphite disc. To achieve high RIB production rates, the areal thickness variation must be constrained within 2%. This paper presents physical thickness characterizations of FRIB production targets with various nominal thicknesses, measured using a custom-built non-contact thickness measurement apparatus.

Instrumentation for radioactive beams (fragmentati↗

SHIELDING ANALYSIS FOR X-RAY SOURCES GENERATED IN TARGET CHAMBER OF THE NATIONAL IGNITION FACILITY

Prompt doses from x-rays generated as result of laser beam interaction with target material are calculated at different locations inside the National Ignition Facility (NIF). The maximum dose outside a Target Chamber diagnostic port is {approx} 1 rem for a shot utilizing the 192 laser beams and 1.8 MJ of laser energy. The dose during a single bundle shot (8 laser beams) drops to {approx} 40 mrem. Doses calculated outside the Target Bay doors and inside the Switchyards (except for the 17 ft.-6 in. level) range from a fraction of mrem to about 11 mrem for 192 beams, and scales down proportionally with smaller number of beams. At the 17ft.-6 in. level, two diagnostic ports are directly facing two of the Target Bay doors and the maximum doses outside the doors are 51 and 15.5 mrem, respectively. Shielding each of the two Target Bay doors with 1/4 in. Pb reduces the dose by factor of fifty. One or two bundle shots (8 to 16 laser beams) present a small hazard to personnel in the Switchyards.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Minor Actinide Recycle in Sodium Cooled Fast Reactors Using Heterogeneous Targets

This paper investigates the plausible design of transmutation target assemblies for minor actinides (MA) in Sodium Fast Reactors (SFR). A heterogeneous recycling strategy is investigated, whereby after each reactor pass, un-burned MAs from the targets are blended with MAs produced by the driver fuel and additional MAs from Spent Nuclear Fuel (SNF). A design iteration methodology was adopted for customizing the core design, target assembly design and matrix composition design. The overall design was constrained against allowable peak or maximum in-core performances. While respecting these criteria, the overall design was adjusted to reduce the total number of assemblies fabricated per refueling cycle. It was found that an inert metal-hydride MA-Zr-Hx target matrix gave the highest transmutation efficiency, thus allowing for the least number of targets to be fabricated per reactor cycle.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Design of the NIF Cryogenic Target System

The United States Department of Energy has embarked on a campaign to conduct credible fusion ignition experiments on the National Ignition Facility (NIF) at the Lawrence Livermore National Laboratory in 2010. The target assembly specified for this campaign requires the formation of a deuterium/tritium (DT) fuel ice layer in a 2 mm diameter capsule at the center of a 9 mm long by 5 mm diameter cylinder, called a hohlraum. The ice layer must be formed and maintained at temperatures below 20 K. At laser shot time, the target is positioned at the center of the NIF target chamber, aligned to the laser beams and held stable to less than 7 {micro}m rms. We have completed the final design of the Cryogenic Target System and are integrating the devices necessary to create, characterize and position the cryogenic target for ignition experiments. These designs, with supporting analysis and prototype test results, will be presented.

42 ENGINEERING↗

STATUS OF BEAM IMAGING DEVELOPMENTS FOR THE SNS TARGET

The Spallation Neutron Source (SNS) continues a ramp up in proton beam power toward the design goal of 1.4 MW on target. At Megawatt levels, US and Japanese studies have shown that cavitation in the Mercury target could lead to dramatically shortened target lifetime. Therefore, it will be critical to measure and control the proton beam distribution on the target, in a region of extremely high radiation and limited accessibility. Several sources of photons have been considered for imaging the beam on or near the target. These include a freestanding temporary screen, a scintillating coating, Helium gas scintillation, optical transition radiation, and a beam- heated wire mesh. This paper will outline the selection process that led to the current emphasis on coating development. In this harsh environment, the optics design presented significant challenges. The optical system has been constructed and characterized in preparation for installation. Optical test results will be described along with predictions of overall system performance.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Heavy-Ion Irradiation of Thulium(III) Oxide Targets Prepared by Polymer-Assisted Deposition

Thulium(III) oxide (Tm{sub 2}O{sub 3}) targets prepared by the polymer-assisted deposition (PAD) method were irradiated by heavy-ion beams to test the method's feasibility for nuclear science applications. Targets were prepared on silicon nitride backings (thickness of 1000 nm, 344 {micro}g/cm{sup 2}) and were irradiated with an {sup 40}Ar beam at laboratory frame energy of {approx}210 MeV (50 particle nA). The root mean squared (RMS) roughness prior to irradiation is 1.1 nm for a {approx}250 nm ({approx}220 {micro}g/cm{sup 2}) Tm{sub 2}O{sub 3} target, and an RMS roughness of 2.0 nm after irradiation was measured by atomic force microscopy (AFM). Scanning electron microscopy of the irradiated target reveals no significant differences in surface homogeneity when compared to imaging prior to irradiation. Target flaking was not observed from monitoring Rutherford scattered particles as a function of time.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Preparation of thin metallic titanium foils as hydrogen targets.

In a recently proposed study to resolve the discrepancy for the cross-section from the inverse reaction {sup 21}Ne(p,{alpha}){sup 18}F, important in calculations of asymptotic giant branch (AGB) stellar nucleosynthesis, a hydrogen target was required. Another important consideration for studying this reaction involves the isotopic abundance of Ne measured in stellar silicon carbide (SiC) grains found in meteorites. The measurement consists of the time-reversed reaction in inverse kinematics {sup 1}H({sup 21}Ne,{alpha}){sup 18}F at the resonance energy. Using a stable {sup 21}Ne beam, high currents are anticipated requiring a robust hydrogen-containing target. A metal hydride foil would be more apt to withstand the bombardment over a plastic polyethylene target. For this purpose we chose titanium hydride, as the easily produced titanium foils can be reacted with hydrogen to produce the needed targets. Details of the methods of production as well as target characteristics and performance are discussed.

08 HYDROGEN↗

Density changes in low pressure gas targets for electron scattering experiments

A system of modular sealed gas target cells has been developed for use in electron scattering experiments at the Thomas Jefferson National Accelerator Facility (Jefferson Lab). This system was initially developed to complete the MARATHON experiment which required, among other species, tritium as a target material. Thus far, the cells have been loaded with the gas species 3 H, 3 He, 2 H, 1 H and 40 Ar and operated in nominal beam currents of up to 22.5 μA in Jefferson Lab's Hall A. While the gas density of the cells at the time of loading is known, the density of each gas varies uniquely when heated by the electron beam. To extract experimental cross sections using these cells, density dependence on beam current of each target fluid must be determined. In this study, data from measurements with several beam currents within the range of 2.5 to 22.5 μA on each target fluid are presented. In addition, expressions for the beam current dependent fluid density of each target are developed.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Electrospraying deposition and characterization of potassium chloride targets for nuclear science measurements

Natural and isotopically enriched KCl targets were prepared using specially formulated KCl solutions, deposited by electrospraying on thin (1.5 μm) gold backings, followed by a short annealing in a preheated (350-450 °C) furnace. Various techniques, such as X-ray fluorescence (XRF), scanning electron microscopy (SEM) imaging, and energy-dispersive X-ray spectroscopy (EDS), were used to characterize the produced targets. A white neutron beam at the Los Alamos Neutron Science Center (LANSCE) facility was also used to verify the estimated atomic percentages of the enriched 40 KCl targets. KCl was deposited relatively uniformly as large particles rather than films on the gold surface. As a result, this method can be broadly extended to make stable targets that are difficult to produce with other methods and more exotic radioactive targets required for research in fundamental sciences and applications.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Correcting beam space charge effects in Active-Target Time Projection Chamber

By providing a large gaseous volume for nuclear interactions while simultaneously recording the tracks of resulting reaction products, an active target serves as both a thick target and a detector. Once a reaction occurs, the emitted charged fragments strip electrons from the target gas along their path as they transverse the detector. Collection of these stripped electrons allow for detection of the product tracks. As beam intensity increases, the resulting ionization in the active target can significantly distort this collection of electrons. If left uncorrected, the resulting measurements could be wrong. In this paper, we investigate the impact of the space charge produced by heavy radioactive beams within the Active Target - Time Projection Chamber at Michigan State University. The beams are injected parallel to the electric field of the time projection chamber which is operated without a magnetic field for this experiment. Furthermore, we analyze the rate dependence of the space charge effects and demonstrate that they can be modeled and effectively corrected.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Chemoproteomic Elucidation of β-Lactam Drug Targets in Mycobacterium abscessus

The pathogen Mycobacterium abscessus (Mab) can cause severe and difficult-to-treat chronic lung infections. Despite the rising incidence and clinical concern of Mab infections, treatment options are limited and often ineffective. Treatment is complicated by Mab’s ability to persist in a nonreplicating, drug-resistant state. Several β-lactam antibiotics are potently bactericidal against Mab but are underutilized because their molecular mechanisms of action against Mab are incompletely understood. In the current study, we used β-lactam-derived activity-based probes and chemoproteomics to report the first comprehensive list of Mab enzymes targeted by β-lactams. We compared β-lactam targets across two Mab subspecies in actively replicating and nonreplicating cultures, using a new carbon starvation model of persistence. We identified 17 targets that were active in every condition tested, seven of which were previously unknown to bind β-lactams. Lastly, we characterized the β-lactamase activity and β-lactam inhibition profiles of nine Mab enzymes, demonstrating that imipenem inhibits these targets more effectively than cefoxitin. These findings demonstrate β-lactam target engagement in persistent Mab and provide clarity on the mechanisms of action of clinically relevant β-lactams in Mab, crucial steps toward fully realizing their potential for treating infections caused by this opportunistic pathogen.

Mycobacterium abscessus↗

Streaked x-ray backlighting with twin-slit imager for study of density profile and trajectory of low-density foam target filled with deuterium liquid

Low-density plastic foam filled with liquid deuterium is one of the candidates for inertial fusion target. Density profile and trajectory of 527 nm laser-irradiated planer foam-deuterium target in the acceleration phase were observed with streaked side-on x-ray backlighting. An x-ray imager employing twin slits coupled to an x-ray streak camera was used to simultaneously observe three images of the target: self-emission from the target, x-ray backlighter profile, and the backlit target. The experimentally obtained density profile and trajectory were in good agreement with predictions by one-dimensional hydrodynamic simulation code ILESTA-1D.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

A metamodeling approach for studying ignition target robustness in a highly dimensional parameter space

Inertial confinement fusion targets must be carefully designed to ignite their central hot spots and burn. Changes in the optimal implosion could reduce the fusion energy or even prevent ignition. Since there are unavoidable uncertainties due to technological defects and not perfect reproducibility from shot to shot, the fusion energy will remain uncertain. The degree with which a target can tolerate larger specifications than specified, and the probability with which a particular yield is exceeded, are possible measures of the robustness of that design. This robustness must be assessed in a very high-dimensional parameter space whose variables include every characteristics of the given target and of the associated laser pulse shape, using high-fidelity simulations. Therefore, these studies would remain computationally very intensive. In this paper we propose an approach which consist first of constructing an accurate metamodel of the yield on the whole parameter space with a reasonable data set of simulations. Then the robustness is very quickly assessed for any set of specifications with this surrogate. The yield is approximated by a neural network, and an iterative method adds new points in the data set by means of D-optimal experimental designs. The robustness study of the baseline Laser Megajoule target against one-dimensional defects illustrates this approach. A set of 2000 simulations is sufficient to metamodel the fusion energy on a large 22-dimensional parameter space around the nominal point. Furthermore, a metamodel of the robustness margin against all specifications has been obtained, providing guidance for target fabrication research and development.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Ion Beam Analysis of Targets Used in Controlatron Neutron Generators

Controlatron neutron generators are used for testing neutron detection systems at Sandia National Laboratories. To provide for increased tube lifetimes for the moderate neutron flux output of these generators, metal hydride (ZrT{sub 2}) target fabrication processes have been developed. To provide for manufacturing quality control of these targets, ion beam analysis techniques are used to determine film composition. The load ratios (i.e. T/Zr concentration ratios) of ZrT{sub 2} Controlatron neutron generator targets have been successfully measured by simultaneously acquiring RBS and ERD data using a He{sup ++} beam energy of 10 MeV. Several targets were measured and the film thicknesses obtained from RBS measurements agreed within {+-}2% with Dektak profilometer measurements. The target fabrication process and ion beam analysis techniques will be presented.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

High-quality proton bunch from laser interaction with a gas-filled cone target

Generation of high-energy proton bunch from interaction of an intense short circularly polarized (CP) laser pulse with a gas-filled cone target (GCT) is investigated using two-dimensional particle-in-cell simulation. The GCT target consists of a hollow cone filled with near-critical gas-plasma and a thin foil attached to the tip of the cone. It is observed that as the laser pulse propagates in the gas-plasma, the nonlinear focusing will result in an enhancement of the laser pulse intensity. It is shown that a large number of energetic electrons are generated from the gas-plasma and accelerated by the self-focused laser pulse. The energetic electrons then transports through the foil, forming a backside sheath field which is stronger than that produced by a simple planar target. A quasi-monoenergetic proton beam with maximum energy of 181 MeV is produced from this GCT target irradiated by a CP laser pulse at an intensity of 2.6 x 10{sup 20} W/cm{sup 2}, which is nearly three times higher compared to simple planar target (67 MeV).

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Proton emission from thin hydrogenated targets irradiated by laser pulses at 10{sup 16} W/cm{sup 2}

The iodine laser at PALS Laboratory in Prague, operating at 1315 nm fundamental harmonics and at 300 ps FWHM pulse length, is employed to irradiate thin hydrogenated targets placed in vacuum at intensities on the order of 10{sup 16} W/cm{sup 2}. The laser-generated plasma is investigated in terms of proton and ion emission in the forward and backward directions. The time-of-flight technique, using ion collectors and semiconductor detectors, is used to measure the ion currents and the corresponding velocities and energies. Thomson parabola spectrometer is employed to separate the contribution of the ion emission from single laser shots. A particular attention is given to the proton production in terms of the maximum energy, emission yield, and angular distribution as a function of the laser energy, focal position, target thickness, and composition. Metallic and polymeric targets allow to generate protons with large energy range and different yield, depending on the laser, target composition, and target geometry properties.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗