Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “raman”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 955 records · Page 53
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Glass formation and structure of melt quenched mixed oxy-sulfide Na 4 P 2 S 7-x O x glasses for 0 ≤ x ≤ 5

The structures of Na 4 P 2 S 7-x O x , 0 ≤ x ≤ 5, glasses were investigated using melt quench (MQ) samples. The short-range order (SRO) structures of these glasses were examined using a combination of Raman, Fourier Transform Infrared (FT-IR), and 31 P Magic Angle Spinning NMR ( 31 P MAS NMR) spectroscopies to determine how oxygen is incorporated into the sulfide structure. Using vibrational spectroscopy, semi-quantitative 31 P MAS NMR, and charge balancing, a complete compositional map of all the SRO structures present in these glasses has been generated. From these findings, full incorporation of the oxygen into the sulfide melt was found to occur across the compositional series through a structural disproportionation reaction where oxygen systematically replaces bridging sulfurs (BSs), before replacing the remaining non-bridging sulfurs (NBSs). Under the melting and quenching conditions used in this study, it was found that the melts crystallize too quickly to form homogeneous crystallite-free glasses for x > 5.

36 MATERIALS SCIENCE↗
DOE OSTI2026

The influence of iron incorporation on the microstructure and crystal chemistry of UO 2 fuel

The incorporation of dopants into UO 2 is of interest for both doped advanced fuel and nuclear forensics research. Suitable forensics dopants, or taggants, for nuclear fuels are ones that do not adversely affect the performance of the parent material while still being traceable during key stages of the fuel’s life cycle. In this paper, we present our efforts to understand the effects of doping UO 2 with Fe 2 O 3 under multiple parameters, such as Fe concentration (0–3000 wppm), sintering temperature (1673 K, 1773 K, and 1973 K), sintering time (2–12 h), and atmosphere (reducing and inert). Here, we investigated densification behavior, microstructure evolution, and lattice defects based on the geometric densities, scanning electron microscopy (SEM), X-ray diffractograms, and Raman spectra. The effect of Fe on the microstructure and crystal chemistry of UO 2 is very complex, especially at the intermediate temperature (1773 K), where we found that densification kinetics are enhanced and that lattice contraction occurs for doping concentrations greater than 1000 wppm Fe.

Crystallography↗
DOE OSTI2026

Stoichiometric effects on grain growth in zirconium carbide coatings for high-temperature nuclear fuel

Interest in coated particle fuel for space nuclear propulsion (SNP) has expanded in recent years due to successful demonstrations of the resiliency of the coatings to extreme environments. For SNP applications, the coating layer for the particle design needs to be able to withstand exposure to high temperature hydrogen during operating conditions. ZrC has been proposed as a protective layer, however, it is important to understand the high temperature behavior to ensure adequate protection to this fuel. In this study, surrogate ZrC coated particles were heat treated at 1900 °C up to 300 min, to examine how the microstructure evolves when exposed to high temperature. Scanning electron microscopy and electron backscatter diffraction (EBSD) were conducted to determine grain size and grain boundary character and orientation to determine the degree of change in the ZrC layer post heat treatment. Raman spectroscopy provided insight to understand how the as-fabricated stoichiometry of each sample contributed to the differences in grain growth behavior. Despite the as-fabricated samples showing a similar initial grain size and grain boundary character, the samples with a higher amount of excess carbon exhibited smaller grain areas and slower growth rates when exposed to 1900 °C. In conclusion, this investigation details the as-fabricated microstructure of the ZrC layer, specifically grain size, evolved under high temperature as this can impact the performance of the fuel under operating conditions.

EBSD↗
DOE OSTI2026

NOx mediated formation of ε – UO 3 during thermal decomposition of uranyl nitrate hexahydrate under static air conditions

The thermal decomposition of uranyl nitrate hexahydrate in air at temperatures of 650 – 800 °C is expected to yield α – U 3 O 8 through intermediate UO 3 phases. Here, n this study, Raman spectroscopy complimented by powder X-ray diffraction revealed the unexpected formation of ε – UO 3 as an accompanying phase during thermal decomposition of UNH at 700 °C under static air conditions. Experiments demonstrated that ε – UO 3 does not form during the initial ramp up stage nor during the high temperature heating period; but instead forms during the cooling stage between 250 – 400 °C. Additional experiments revealed that UNH initially decomposes through an amorphous UO 3 intermediate prior to α – U 3 O 8 formation. Attempts to bypass the U 3 O 8 precursor in the formation of ε – UO 3 were unsuccessful, supporting the necessity of U 3 O 8 (α – U 3 O 8 in this study) in the formation of ε – UO 3 . The observed phase evolution is proposed to result from the NOx species generated during UNH thermal decomposition, which create localized oxidizing conditions within the furnace under static air conditions. Furthermore, a predominantly phase pure ε – UO 3 was synthesized under static air conditions through the addition of an extra plateau at 250 °C during the cooling step. These findings demonstrate the importance of gas-phase chemistry and cooling conditions in uranium oxide phase evolution and provide additional insight into ε – UO 3 formation pathways.

Epsilon uranium trioxide↗
DOE OSTI2021

Influence of heterocyclic N-donors on the structural topologies and vibrational spectra of uranyl selenate phases

Uranyl (U(VI)O 2 2+ ) selenate compounds represent a well-studied family of structures with diverse structural arrays. Differences in the overall topology and bonding with the uranyl cation combined with additional intermolecular interactions can lead to variation in the resulting spectroscopic signals. Here, in the current study, we evaluated the structural chemistry and vibrational spectroscopy for uranyl selenates crystallized with heterocyclic N-donors. Five compounds ((C 4 H 12 N 2 )[(UO 2 )(SeO 4 ) 2 (H 2 O)]·H 2 O (USe_pip), (C 4 H 5 N 2 ) 2 [(UO 2 )(SeO 4 ) 2 (H 2 O)] (USe_pyrdz), (C 5 H 5 N) 2 [(UO 2 ) 2 (SeO 4 ) 3 (H 2 O)] ∙ 3H 2 O (USe_pyrmd), (H 3 O) 2 (C 4 H 5 N 2 ) 2 [(UO 2 ) 3 (SeO 4 ) 5 (H 2 O)]·H 2 O (USe_pyrz), and (C 5 H 6 N) 2 [(UO 2 ) 2 (SeO 4 ) 3 (H 2 O)] ∙ 3H 2 O (USe_pyr)) were characterized using X-ray diffraction (single-crystal and powder) and vibrational (Raman and IR) spectroscopy. Two one-dimensional (1-D) chain and three two-dimensional sheet (2-D) topologies were identified and classified based upon previous graphical representations. Overall, the arrangement of the heteroatoms could be linked to the hydrogen bonding network associated with the heterocycles and selenate anions. Vibrational spectra of the solid-state compounds were complex, with multiple bands associated with the uranyl cation, selenate anion, and heteroatoms. The ν 1 symmetric stretching band of the uranyl was relatively consistent across all compounds, whereas differences were observed for the ν 3 asymmetric band between the 1-D and 2-D structural topologies.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Choline Fluoride-Ethylene glycol deep eutectic solvent mixture – Synthesis and physicochemical properties

A critical factor in achieving tunability in DESs is varying the type of hydrogen bond acceptors (HBAs) and donors (HBDs). Choline halides (ChX), such as ChCl and ChBr, have been studied to investigate the effect of the choline anion on DESs. However, ChF-based DESs have been underrepresented in scientific research. ChF has excellent potential, such as high electron affinity, ionization potential, and strong hydrogen bond interactions. Moreover, ChF-based DES can lead to a deeper understanding of DESs due to the NMR-active 19F nuclear spin nature. We report the first synthesis and characterization of choline fluoride-EG (1:2, ChF:EG) DES, which we named “EthalineF.” We studied this mixture using various spectroscopic techniques, including NMR, FT-IR, Raman, and UV–vis spectroscopies. Polarity, density, viscosity, and conductivity measurements were collected as well. Transient absorption spectroscopy (TAS) was used to study the solvation dynamics of EthalineF. 19F NMR indicated that some fluoride anions (~15%) are coordinated to the choline cation. In EthalineF, the new type of observed fluoride anions is proposed to be a tight-binding choline-fluoride ion pair. Further, EthalineF has a larger solvodynamic radius than Ethaline. This can explain the lower conductivity for EthalineF compared to Ethaline despite the higher fluidity and solvation dynamics for EthalineF.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Preference for a pressure-induced 3D structure after 1T-HfSe 2

Extensive crystal structure prediction searches provide evidence of two 3D structures with orthorhombic (Immm) and monoclinic (C2/m) space groups as reasonable candidates for the first pressure-induced phase of 1T-HfSe 2 . Our candidates are compared with two recent proposals that keep the 2D nature of the ambient conditions phase and display hexagonal (P6 3 /mmc) and monoclinic (C2/m) symmetry, although the latter has a different structure than our proposed C2/m phase. Both of these 2D-like structures are discarded based on simple thermodynamic and kinetic arguments that can be extended to explain the pressure-induced polymorphic sequence of other transition metal dichalcogenides. The computed observables of our orthorhombic phase are fully consistent with the experimental structural and Raman data observed at low and high-pressure.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Sulphur variations in annually layered stalagmites using benchtop micro-XRF

Variation of sulphur in annually laminated stalagmites can be used to infer the impact of past volcanic activities, anthropogenic pollution, and climate change due to increased bushfire activity. The synchrotron radiation micro-X-Ray fluorescence (SR-XRF) microprobe is a powerful tool to analyse and image sulphur recorded in stalagmites with micrometre resolution. However, access to SR-XRF beamlines can be limited, so researchers must select the most promising stalagmites for imaging. Benchtop micro-XRF is an effective tool for trace elemental analysis of speleothem samples and is a candidate for routine laboratory measurement of sulphur along stalagmite laminae and screening for SR-XRF. Here, this study describes a protocol using matrix-matched standards to measure annual variations of sulphur at trace to percent level along the laminae of two Western Australian stalagmites, one of which already having been analysed using SR-XRF. Parameters that affected quantitation include X-ray tube voltage and current, spot size of the X-ray beam and stalagmite surface roughness and porosity. The use of a 20 μm X-ray spot size provides sub-annual spatial resolution that can be completed in an overnight scan. The features in a 1000 point micro-XRF analysis of sulphur along a 20 mm transect show good consistency with SR-XRF microprobe data. Micro-XRF mapping was also performed to produce chemical images on the stalagmite and compared with Raman and X-ray diffraction (XRD) to confirm that the stalagmite is exclusively calcite, with no aragonite, and that the source of sulphur in the samples was gypsum and anhydrite. Regions of very high sulphur in the micro-XRF maps were found to be artefacts due to diffraction of the incident beam but these could be efficiently removed by using a multiple point statistics approach to produce a clean image suitable for analysis of the laminae. This work shows the potential of micro-XRF for routine analysis of sulphur in stalagmites, and to streamline sample characterisation before SR-XRF imaging.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Characterization of the aerosol vertical distributions and their impacts on warm clouds based on multi-year ARM observations

Aerosol vertical distribution plays a crucial role in cloud development and thus precipitation since both aerosol indirect and semi-direct effects significantly depend on the relative position of aerosol layer in reference to cloud, but its precise influence on cloud remains unclear. In this study, we integrated multi-year Raman Lidar measurements of aerosol vertical profiles from the U.S. Department of Energy Atmospheric Radiation Measurement (ARM) facility with available Value-Added Products of cloud features to characterize aerosol vertical distributions and their impacts on warm clouds over the continental and marine ARM atmospheric observatories, i.e., Southern Great Plains (SGP) and Eastern North Atlantic (ENA). A unimodal seasonal distribution of aerosol optical depths (AODs) with a peak in summer is found at upper boundary layer over SGP, while a bimodal distribution is observed at ENA for the AODs at lower levels with a major winter-spring maximum. The diurnal mean of upper-level AOD at SGP shows a maximum in the early evening. According to the relative positions of aerosol layers to clouds we further identify three primary types of aerosol vertical distribution, including Random, Decreasing, and Bottom. It is found that the impacts of aerosols on cloud may or may not vary with aerosol vertical distribution depending on environmental conditions, as reflected by the wide variations of the relations between AOD and cloud properties. For example, as AOD increases, the liquid water paths (LWPs) tend to be reduced at SGP but enhanced at ENA. The relations of cloud droplet effective radius with AOD largely depend on aerosol vertical distributions, particularly showing positive values in the Random type under low-LWP condition (<50gm -2 ). In conclusion, the distinct features of aerosol-cloud interactions in relation to aerosol vertical distribution are likely attributed to the continental-marine contrast in thermodynamic environments and aerosol conditions between SGP and ENA.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

Thermal stability of dopants in boron carbide

Undoped (B 4 C), B rich (B 5.5 C), and B/Si co-doped (Si-B 6.5 C) boron carbides were annealed at 500 °C for up to 21 days to investigate the thermal stability of primary dopants, B and Si. Structural changes associated with dedoping were investigated by X-ray diffraction (XRD) and Raman spectroscopy. The stable phase B 4 C showed no microstructural or lattice parameter changes. Similarly, lattice parameters of B 5.5 C remained constant, suggesting that B dopant is stable at the given conditions. However, the shortened lattice parameters and reduced Si content of Si-B 6.5 C over the annealing time indicated that Si dopant was in a metastable state at the annealing temperature. Consequently, Si dedoping led to an increase in amorphization (a loss of local crystalline order) which degrades the ballistic performance of boron carbide. The insight highlights the importance of Si dopant in boron carbide and suggests that rapid processing may be necessary to retain more silicon for better performance.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Open Specy 1.0: Automated (Hyper)spectroscopy for Microplastics

Microplastic spectral analysis is one of the most time-consuming processes in studying microplastic pollution, often requiring days per sample. Researchers are transitioning to automated batch and hyperspectral image analysis techniques to enhance efficiency. Open Specy, initially aimed at manual single-spectrum analysis, has now integrated automated methods. This updated version, Open Specy 1.0, introduces several new features, including two algorithms for automated processing (smoothing and particle compression), an extensive library containing over 40,000 open-source Raman and FTIR spectra, and two machine learning classifiers (logistic regression and k medoids) developed from this library. Furthermore, it includes a revamped user interface, an R package, and a benchmark data set for testing future advancements in automated techniques. Researchers evaluated various configurations for hyperspectral smoothing, particle identification, compression, and splitting, to achieve combined recovery rates between 50 and 150% particle counts, identities, and sizes with a coefficient of variation (CV) of less than 40% (the accredited standard). Mean absorbance times the standard deviation provided a consistent particle identification. Hyperspectral smoothing led to a 96% combined recovery rate and reduced variability (CV = 38%) compared to the 86% recovery (CV = 83%) of nonsmoothed controls. Additionally, compressing spectra for particles was significantly faster (>3x) and showed similar accuracy but with reduced variability than processing each pixel individually. Key challenges persist in automating spectral analysis, particularly in refining particle splitting algorithms, and improving identification routines to minimize false positives and negatives. In conclusion, new methods in sample preparation for better stabilization and dispersion of particles could overcome some of these issues.

13 HYDRO ENERGY↗
DOE OSTI2021

Insights into the Rich Polymorphism of the Na + Ion Conductor Na 3 PS 4 from the Perspective of Variable-Temperature Diffraction and Spectroscopy

Solid electrolytes are crucial for next-generation solid-state batteries, and Na 3 PS 4 is one of the most promising Na + conductors for such applications, despite outstanding questions regarding its structural polymorphs. In this contribution, we present a detailed investigation of the evolution in structure and dynamics of Na 3 PS 4 over a wide temperature range 30 < T T < 500 °C, which we attribute to dynamic local tetragonal distortions. The first-order phase transition to the mesophasic high-temperature polymorph (γ, Fddd ) is associated with a sharp volume increase and the onset of liquid-like dynamics for sodium-cations (translational) and thiophosphate-polyanions (rotational) evident by inelastic neutron and Raman spectroscopies, as well as pair-distribution function and molecular dynamics analyses. Overall, these results shed light on the rich polymorphism of Na 3 PS 4 and are relevant for a range host of high-performance materials deriving from the Na 3 PS 4 structural archetype.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Direct Evidence of Charge Transfer upon Anion Intercalation in Graphite Cathodes through New Electronic States: An Experimental and Theoretical Study of Hexafluorophosphate

Graphite intercalation compounds continue to be central to technologies for electrochemical energy storage from anodes in established Li-ion batteries to cathodes in beyond Li-ion concepts paired with multivalent anodes. When used as a cathode, graphite intercalates a variety of anions with PF 6 - being among the most common. Paired with Li intercalation at the anode, the corresponding dual carbon battery yields high energy and power densities. Given the available choice of anions as intercalants, it is important to elucidate how the graphite structure accommodates them in order to tailor the molecular species to maximize charge and reversibility. However, the changes in electronic structure of the host graphite lattice upon anion intercalation are poorly understood compared to cations, which represent a fundamentally different reaction. Herein, PF 6 -intercalated graphite has been studied using techniques sensitive to electronic structure, namely, X-ray Raman spectroscopy (XRS), X-ray absorption near-edge spectroscopy (XANES), and X-ray emission spectroscopy (XES). Complementary full-potential, all-electron density functional theory calculations yielded excellent agreement with the spectra, thus providing insight into charge compensation in the graphite lattice. In particular, a pre-$π^*$ feature emerged in XRS/XANES, which is direct evidence of the removal of charge from the host lattice to compensate the intercalated anions, leading to an overall lowering of the Fermi energy level. This is expected to be characteristic of many intercalants in anion-intercalated graphite. The unambiguous identification of the origin of the pre-$π^*$ spectral feature, which is frequently seen in graphitic systems, is of broad interest to the spectroscopy of graphitic systems beyond the practical implications of anion-induced changes in the electronic properties for real devices.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Radiation Effects on the Performance of Advanced Sulfur Monochloride Chlorination Processes

Advanced sulfur chloride-based chlorination technologies are being developed to enable efficient recycling of aluminum and zirconium-based materials used in the nuclear industry. However, the impacts of ionizing radiation on the performance of these sulfur chloride compounds are not well established, despite this being critical knowledge for assessing their feasibility and longevity under envisioned process conditions. Here, in the present article, we report on the effects of cobalt-60 gamma irradiation (≤ 5 MGy) on the aluminum alloy 6061 (AA6061-T6) chlorination yield in sulfur monochloride (S 2 Cl 2 ). Our findings indicate that, compared to nonirradiated solvent, radiation-induced changes in the chemical composition of S 2 Cl 2 —identified using Raman spectroscopy—afford an additional, dose-dependent exothermic process prior to the chlorination reaction’s typical thermodynamic behavior. We attribute this new process to reactions involving aluminum species (metal, oxide, or [oxy]hydroxides) and sulfur dichloride (SCl 2 ), an S 2 Cl 2 radiolysis product that accumulates with absorbed gamma dose, but is absent following an AA6061-T6 chlorination study. Despite the exothermicity of this new process, the overall yield of chlorination decreased with increasing preirradiation dose. Consequently, the chemical reactivity, specificity (aluminum metal vs aluminum passivation and corrosion layer constituents), and byproducts of SCl 2 must be more thoroughly evaluated to support the continued development of advanced S 2 Cl 2 chlorination technologies.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗
DOE OSTI2022

Structural and Bonding Analysis in Monomeric Actinide(IV) Oxalate from Th(IV) to Pu(IV): Comparison with the An(IV) Nitrate Series

In this work, single-crystal X-ray diffraction (SC-XRD) structures and Raman spectra of a series of new isomorphous molecular An(IV)-oxalate compounds (Th, U, Np, and Pu) are reported. These complexes are crystallized with cobalt(III) hexamine ([Co(NH 3 ) 6 ] 3+ ) as the counter cations, [Co(NH 3 ) 6 ] 2 [An(C 2 O 4 ) 5 ]·4H 2 O, revealing five bidentate nonbridging oxalate ligands in the first coordination sphere (CN = 10). The nonbridging oxalate is rather uncommon for An(IV)-oxalate systems, which are widely characterized as polymeric compounds. Density functional theory (DFT) calculations were performed to examine the bonding between An(IV) cations and oxalate ligands. For comparison, we also report results obtained for the An(IV)-hexanitrate series, [(C 2 H 5 ) 4 N] 2 [An(NO 3 ) 6 ] (with An = Th, U, Np, Pu, and Ce), which consists of O-donor ligands as well but with a larger coordination number (CN = 12). The bonding analysis confirms that the actinide–oxygen bond is predominantly ionic with a minor increase in covalency from Th to U and slight variations from U to Pu. Further comparison showed that the charge transfer increases slightly when increasing the number of anions in the coordination sphere (C 2 O$_4^{2–}$: CN = 10; NO$_3^–$: CN = 12), but covalent effects as indicated by the amount of internuclear electron density accumulation are small and similar for oxalate and nitrate.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Synthesis of Single Crystal Li 2 NpO 4 and Li 4 NpO 5 from Aqueous Lithium Hydroxide Solutions under Mild Hydrothermal Conditions

The ternary oxides, Li 2 NpO 4 and Li 4 NpO 5 , were synthesized under mild hydrothermal conditions using concentrated LiOH solutions containing NpO 2 (NO 3 )( 2 ). The reactions resulted in the formation of single crystals of both compounds, enabling the determination of their single crystal structures for the first time. Further, exploration of the synthetic phase space demonstrates that the resulting neptunate phases are dependent on the concentration of LiOH, transitioning from Li 2 NpO 4 , containing a typical octahedral neptunyl geometry with two shorter Np≡O bonds, at lower LiOH concentrations to Li 4 NpO 5 with two long and four short Np-O bonds under saturated solution conditions. Reactions exploring the same synthetic conditions are also reported for uranyl(VI) for comparison. Raman spectra of the compounds were collected and analyzed to evaluate the Np-O bonding in these compounds.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

In Situ Determination of Speciation and Local Structure of NaCl–SrCl 2 and LiF–ZrF 4 Molten Salts

Understanding the local environment of the metal atoms in salt melts is important for modeling the properties of melts and predicting their behavior and thus helping enable the development of technologies such as molten salt reactors and solar-thermal power systems and new approaches to recycling rare-earth metals. Toward that end, we have developed an in situ approach for measuring the coordination of metals in molten salt coupling X-ray absorption spectroscopy (XAS) and Raman spectroscopy. Our approach was demonstrated for two salt mixtures (1.9 and 5 mol % SrCl 2 in NaCl, 0.8 and 5 mol % ZrF 4 in LiF) at up to 1100 °C. Near-edge (X-ray absorption near-edge structure, XANES) and extended X-ray absorption fine structure (EXAFS) spectra were measured. The EXAFS response was modeled using ab initio FEFF calculations. Strontium’s first shell is observed to be coordinated with chlorine (Sr 2+ –Cl – ) and zirconium’s first shell is coordinated by fluorine (Zr 4+ –F – ), both having coordination numbers that decrease with increasing temperature. Multiple zirconium complexes are believed to be present in the melt, which may interfere and distort the EXAFS spectra and result in an anomalously low zirconium first shell coordination number. Finally, the use of boron nitride (BN) powder as a salt diluent for XAFS measurements was found to not interfere with measurements and thus can be used for investigations of such systems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Comparable Enhancement of TERS Signals from WSe 2 on Chromium and Gold

Plasmonic tip-sample junctions, at which the incident and scattered optical fields are localized and optimally enhanced, are often exploited to achieve ultrasensitive and highly spatially localized tip-enhanced Raman scattering (TERS). Recent work has demonstrated that the sensitivity and spatial resolution that are required to probe single molecules are attainable in such platforms. In this work, we observe and rationalize comparable TERS from few-layer WSe 2 single crystals exfoliated onto Au- and Cr-coated Si substrates, using a plasmonic TERS probe excited with a 638-nm laser. Our experimental observations are supported by finite-difference time-domain simulations that illustrate that the attainable field enhancement factors at the Au-Au and Au-Cr tip-sample nanojunctions are comparable in magnitude. Furthermore, through a combined experimental and theoretical analysis, we propose that besides Au/Ag, several metallic substrates may be used to record bright TERS spectral images.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗