Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “PLASMA PROBE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 955 records · Page 53

Role of plasma enhanced atomic layer deposition reactor wall conditions on radical and ion substrate fluxes

Chamber wall conditions, such as wall temperature and film deposits, have long been known to influence plasma source performance on thin film processing equipment. Plasma physical characteristics depend on conductive/insulating properties of chamber walls. Radical fluxes depend on plasma characteristics as well as wall recombination rates, which can be wall material and temperature dependent. Variations in substrate delivery of plasma generated species (radicals, ions, etc.) impact the resulting etch or deposition process resulting in process drift. Plasma enhanced atomic layer deposition is known to depend strongly on substrate radical flux, but film properties can be influenced by other plasma generated phenomena, such as ion bombardment. In this paper, the chamber wall conditions on a plasma enhanced atomic layer deposition process are investigated. The downstream oxygen radical and ion fluxes from an inductively coupled plasma source are indirectly monitored in temperature controlled (25–190 °C) stainless steel and quartz reactors over a range of oxygen flow rates. Etch rates of a photoresist coated quartz crystal microbalance are used to study the oxygen radical flux dependence on reactor characteristics. Plasma density estimates from Langmuir probe ion saturation current measurements are used to study the ion flux dependence on reactor characteristics. Reactor temperature was not found to impact radical and ion fluxes substantially. Radical and ion fluxes were higher for quartz walls compared to stainless steel walls over all oxygen flow rates considered. The radical flux to ion flux ratio is likely to be a critical parameter for the deposition of consistent film properties. Reactor wall material, gas flow rate/pressure, and distance from the plasma source all impact the radical to ion flux ratio. These results indicate maintaining chamber wall conditions will be important for delivering consistent results from plasma enhanced atomic layer deposition systems.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Observation of Large-Scale Density Cavities and Parametric-Decay Instabilities in the High-Altitude Discrete Auroral Ionosphere under Pulsed Electromagnetic Radiation

A large density cavity that measured 2000 km across and 500 km in height was observed by DEMETER and Formosat/COSMIC satellites in temporal and spatial relation to a new mode of propagation of electromagnetic (em) pulses between discrete magnetic field-aligned auroral plasmas to high altitudes. Recorded positive plasma potential from satellite probes is consistent with the expulsion of electrons in the creation of density cavities. High-frequency decay spectra support the concept of parametric instabilities fed by free energy sources.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Origin of electrical signals for plasma etching endpoint detection

Electrical signals are used for endpoint detection in plasma etching, but the origin of the electrical changes observed at endpoint is not known. They may be caused by changes in the gas-phase densities of etch products and reactants or by changes in substrate surface properties such as photoemitted or ion-induced electron yield. To investigate these effects, experiments were performed in an inductively coupled, rf-biased reactor, during CF{sub 4}/Ar etches of SiO{sub 2} films on Si wafers. The rf bias impedance was measured vs. time during etching, simultaneous with Langmuir probe measurements. At endpoint, a decrease in impedance coincided with increases in ion current and electron energy. The data, analyzed by a numerical model of the discharge, indicate that changes in electron emission yield were relatively insignificant or entirely absent. Thus the impedance change is not a surface effect but is, instead, predominantly or entirely a gas-phase phenomenon.

36 MATERIALS SCIENCE↗

Standing waves along a microwave generated surface wave plasma

Two surface wave plasma columns, generated by microwave power in argon at gas pressures of 0.05 torr to 330 torr, interact in the same discharge tube to form standing surface waves. Radial electric field and azimuthal magnetic field outside the discharge tube are measured to be 90 deg out of phase with respect to axial position and to decay exponentially with radial distance from the tube axis. Maximum light emission occurs at the position of maximum azimuthal magnetic field and minimum radial electric field. Electron temperature and density are measured at low pressures with double probes inserted into the plasma at a null of radial electric field. Measured electron densities compare well with those predicted by Gould-Trivelpiece surface wave theory.

Rogers, J.↗

Study of plasma dynamics in a modulated pulsed power magnetron discharge using a time-resolved Langmuir probe

Modulated pulse power (MPP) technology is a derivative of high power pulsed magnetron sputtering that allows unprecedented user control over the growth process, although the critical time-dependent plasma properties during the power pulse have not been studied until now. Using a MPP plasma generator, pulses of custom voltage waveforms were generated and applied to the cathode of a 36 cm diameter circular planar magnetron. The I-V characteristics of the pulses are separable into distinct discharge stages. A time-resolved triple Langmuir probe was introduced to measure the temporal evolution of the plasma. Typical electron density of 5x10{sup 17} m{sup -3} and electron temperature of 10 eV during the pulse were calculated from measured parameters. Plasma behaviors were observed to closely depend on the pulse waveforms. Various parameters, including pulse current, pulse frequency, pressure, and distance from the target, also affected the electron density and temperature, providing degrees of freedom to optimize the sputtering processes. The effects of each parameter on the pulsed plasma dynamics are discussed and then attributed to mechanisms of electron impact ionization, gas heating, and magnetic confinement.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Electrical characterization of the flowing afterglow of N{sub 2} and N{sub 2}/O{sub 2} microwave plasmas at reduced pressure

A cylindrical Langmuir probe was used to analyze the spatial distribution of the number density of positive ions and electrons as well as the electron energy distribution function (EEDF) in the flowing afterglow of a 6 Torr N{sub 2} and N{sub 2}/O{sub 2} plasma sustained by a propagating electromagnetic surface wave in the microwave regime. In pure N{sub 2} discharges, ion densities were in the mid 10{sup 14} m{sup −3} in the pink afterglow and in the mid 10{sup 12} m{sup −3} early in the late afterglow. In both pink and late afterglows, the ion population was much higher than the electron population, indicating non-macroscopically neutral media. The EEDF was close to a Maxwellian with an electron temperature of 0.5 ± 0.1 eV, except in the pink afterglow where the temperature rose to 1.1 ± 0.2 eV. This latter behavior is ascribed to N{sub 2} vibration-vibration pumping in the pink afterglow that increases the concentration of high N{sub 2} vibrational states and thus rises the electron temperature by vibration-electron collisions. After addition of small amounts of O{sub 2} in the nominally pure N{sub 2} discharge, the charged particles densities and average electron energy first strongly increased and then decreased with increasing O{sub 2} concentration. Based on these data and the evolution of the N{sub 2}{sup +}(B) band emission intensities, it is concluded that a significant change in the positive ion composition of the flowing afterglow occurs, going from N{sub 2}{sup +} in nominally pure N{sub 2} discharges to NO{sup +} after addition of trace amounts of O{sub 2} in N{sub 2}.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Open quantum systems for quarkonia

I review recent applications of the open quantum system framework in the understanding of quarkonium suppression in heavy-ion collisions, which has been used as a probe of the quark–gluon plasma for decades. The derivation of the Lindblad equations for quarkonium in both the quantum Brownian motion and the quantum optical limits and their semiclassical counterparts is explained. The hierarchy of time scales assumed in the derivation is justified from the separation of energy scales in nonrelativistic effective field theories of QCD. Physical implications of the open quantum system approach are also discussed. Finally, I list some open questions for future studies.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Suppression of electric and magnetic fluctuations and improvement of confinement due to current profile modification by biased electrode in Saha Institute of Nuclear Physics tokamak

Improvement of plasma confinement is achieved in normal q{sub a} discharges of SINP-tokamak by introducing a biased electrode inside the last closed flux surface. All the important features of high confinement mode are observed biasing the electrode negatively with respect to the vacuum vessel. Arrays of electric and magnetic probes introduced in the edge plasma region reveal suppression of electric and magnetic fluctuations over distinct frequency ranges as well as modification of the toroidal current profile due to biasing. Further analysis identifies the electrostatic fluctuations to be due to drift mode and the magnetic fluctuations may be of slow compressional Alfven waves. Both get suppressed due to current profile modification during biasing, hence leading to the improvement of plasma confinement.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Propagation speed of rotation signals for field lines undergoing magnetic reconnection

Reconnection is associated with two bending of the magnetic field lines. Considering the usual plane of a 2D reconnection simulation, the first bending is in-plane and produces the needed topological changes by bringing oppositely directed filed lines in proximity. The second is typical of fast reconnection and is out of plane, leading to the formation of the Hall magnetic field. This second rotation has recently been observed to proceed at superAlfvénic speeds and to carry substantial energy fluxes (Shay et al., Phys. Rev. Lett. 107, 065001 (2011)). We revisit these rotations with a new diagnostics based on dispersing a multitude of virtual probes into a kinetic simulation, akin the approach of multi spacecraft missions. The results of the new diagnostics are compared with the theory of characteristics applied to the two fluid model. The comparison of virtual probes and the method of characteristics confirm the findings relative to the out of plane rotation and uncover the existence of two families of characteristics. Both are observed in the simulation. The early stage of reconnection develops on the slower compressional branch and the later faster phase develops on the faster torsional branch. The superAlfvénic signal is only relevant in the second phase.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Propagation of charge-exchange plasma produced by an ion thruster

A charge-exchange plasma is produced downstream of ion thrusters by collisions between energetic ions and neutrals escaping through the ion optics. The charge-exchange ions flow radially from the thruster beam due to electric fields produced by its density gradient. The propagation of the charge-exchange plasma after it leaves the thruster beam is the subject of this paper. Under the proper conditions there is an 'end-effect' of a long, cylindrical Langmuir probe which allows a significant increase in collected ion current when the probe is aligned with a flowing plasma. This effect is used to determine the charge-exchange plasma flow direction at various locations relative to the ion thruster. A portion of the charge-exchange plasma flows upstream of the ion thruster and can represent a contamination source to electrically propelled spacecraft. The ion current collected by the probe as a function of its angle with respect to the plasma flow allows determination of the plasma density and plasma flow velocity at the probe's location upstream of the ion thruster optics. The density value obtained from the ion current agree to within a factor of two of density values obtained by typical voltage-current Langmuir probe characteristics.

Carruth, M. R., Jr.↗

Boltzmann expansion in a radiofrequency conical helicon thruster operating in xenon and argon

A low pressure ({approx}0.5 mTorr in xenon and {approx}1 mTorr in argon) Boltzmann expansion is experimentally observed on axis within a magnetized (60 to 180 G) radiofrequency (13.56 MHz) conical helicon thruster for input powers up to 900 W using plasma parameters measured with a Langmuir probe. The axial forces, respectively, resulting from the electron and magnetic field pressures are directly measured using a thrust balance for constant maximum plasma pressure and show a higher fuel efficiency for argon compared to xenon.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Improving a high-efficiency, gated spectrometer for x-ray Thomson scattering experiments at the National Ignition Facility

We are developing x-ray Thomson scattering for applications in implosion experiments at the National Ignition Facility. In particular we have designed and fielded MACS, a high-efficiency, gated x-ray spectrometer at 7.5–10 keV [T. Döppner et al., Rev. Sci. Instrum. 85, 11D617 (2014)]. Here we report on two new Bragg crystals based on Highly Oriented Pyrolytic Graphite (HOPG), a flat crystal and a dual-section cylindrically curved crystal. We have performed in situ calibration measurements using a brass foil target, and we used the flat HOPG crystal to measure Mo K-shell emission at 18 keV in 2nd order diffraction. Such high photon energy line emission will be required to penetrate and probe ultra-high-density plasmas or plasmas of mid-Z elements.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Study of the feasibility of distributed cathodic arc as a plasma source for development of the technology for plasma separation of SNF and radioactive wastes

One of the key problems in the development of plasma separation technology is designing a plasma source which uses condensed spent nuclear fuel (SNF) or nuclear wastes as a raw material. This paper covers the experimental study of the evaporation and ionization of model materials (gadolinium, niobium oxide, and titanium oxide). For these purposes, a vacuum arc with a heated cathode on the studied material was initiated and its parameters in different regimes were studied. During the experiment, the cathode temperature, arc current, arc voltage, and plasma radiation spectra were measured, and also probe measurements were carried out. It was found that the increase in the cathode heating power leads to the decrease in the arc voltage (to 3 V). This fact makes it possible to reduce the electron energy and achieve singly ionized plasma with a high degree of ionization to fulfill one of the requirements for plasma separation of SNF. This finding is supported by the analysis of the plasma radiation spectrum and the results of the probe diagnostics.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Structure of an exploding laser-produced plasma

Currents and instabilities associated with an expanding dense plasma embedded in a magnetized background plasma are investigated by direct volumetric probe measurements of the magnetic field and floating potential. A diamagnetic cavity is formed and found to collapse rapidly compared to the expected magnetic diffusion time. The three-dimensional current density within the expanding plasma includes currents along the background magnetic field, in addition to the diamagnetic current. Correlation measurements reveal that flutelike structures at the plasma surface translate with the expanding plasma across the magnetic field and extend into the current system that sustains the diamagnetic cavity, possibly contributing to its collapse.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

White Dwarf Photospheres in the Laboratory: A Testbed for Fundamental Atomic Processes

While the spectrum of pure hydrogen plasmas at low densities seems well understood, at higher densities this is not the case. In this domain the line broadening can be extreme and the lines overlap, making the determination of the continuum problematic. The surfaces of white dwarf stars (WDs) fall into this high-density category. Observationally, we find a systematic offset between the masses of WDs derived using the gravitational-redshift method and those using the spectral line-shape fitting method (Falcon et al. 2010, ApJ, 712,585). Given the straightforward nature of the gravitational-redshift method, this discrepancy points toward incompleteness in the modeling of the broadening of hydrogen lines. The resulting uncertainty in mass hinders the many uses of WDs in astronomy and physics: for example, as Galactic chronometers (Winget et al. 1987, ApJL, 315, 77), tracers of stellar evolution, and probes of dense Coulomb plasmas (Winget et al. 2009, ApJL, 693, 6). This has motivated recent attempts to improve the theoretical line profiles used in white dwarf atmosphere models by independent groups, including us. Laboratory benchmarks are essential for assessing the viability of these new theories (Falcon et al. 2013, HEDP, 9, 82). Therefore, our goal is to make laboratory benchmark measurements of atomic line shapes in H – eventually He and C and O as well--for comparison with the lines observed in the photospheres of white dwarf stars.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Two-dimensional double layer in plasma in a diverging magnetic field

Plasma created by an inductive RF discharge is allowed to expand along a diverging magnetic field. Measurement of the axial plasma potential profile reveals the formation of an electric double layer near the throat of the expansion chamber. An accelerated ion beam has been detected in the downstream region, confirming the presence of the double layer. The 2-D nature of the ion energy distribution function of the downstream plasma has been studied by a movable ion energy analyser, which shows that the beam radius increases along the axial distance. The 2-D structure of the plasma potential has been studied by a movable emissive probe. The existence of a secondary lobe in the contour plot of plasma equipotential is a new observation. It is also an interesting observation that the most diverging magnetic field line not intercepting the junction of the discharge tube and the expansion chamber has an electric field aligned with it.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Measurement of sheared flows in the edge plasma of the CASTOR tokamak

The ion saturation current and floating potential are measured with high temporal (1 {mu}s) and spatial (2.5 mm) resolutions at the plasma edge of the CASTOR tokamak by two poloidally spaced radial arrays of Langmuir probes. The radial electric field and the phase velocity of plasma fluctuations are estimated. The position of the velocity shear layer (VSL) is localized with a high precision. The shearing rate {omega}{sub ExB} determined and found to be comparable with the inverse of the correlation time of fluctuations 1/{tau}{sub ac} outside the VSL and about five times higher in the proximity of the VSL. A small impact of the shear on fluctuation level at the VSL is observed also in the statistic parameters of the U{sub fl} and I{sub sat}.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗