Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “SEMICONDUCTOR DEVICE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 937 records · Page 52
All sourcesNASA NTRSDOE OSTI
DOE OSTI2015

3D Band Diagram and Photoexcitation of 2D–3D Semiconductor Heterojunctions

The emergence of a rich variety of two-dimensional (2D) layered semiconductor materials has enabled the creation of atomically thin heterojunction devices. Junctions between atomically thin 2D layers and 3D bulk semiconductors can lead to junctions that are fundamentally electronically different from the covalently bonded conventional semiconductor junctions. In this paper, we propose a new 3D band diagram for the heterojunction formed between n-type monolayer MoS 2 and p-type Si, in which the conduction and valence band-edges of the MoS 2 monolayer are drawn for both stacked and in-plane directions. This new band diagram helps visualize the flow of charge carriers inside the device in a 3D manner. Our detailed wavelength-dependent photocurrent measurements fully support the diagrams and unambiguously show that the band alignment is type I for this 2D-3D heterojunction. Photogenerated electron–hole pairs in the atomically thin monolayer are separated and driven by an external bias and control the “on/off” states of the junction photodetector device. Finally, two photoresponse regimes with fast and slow relaxation are also revealed in time-resolved photocurrent measurements, suggesting the important role played by charge trap states.

36 MATERIALS SCIENCE↗
DOE OSTI2016

Strain-induced phase variation and dielectric constant enhancement of epitaxial Gd{sub 2}O{sub 3}

One of the approaches for realizing advanced high k insulators for metal oxide semiconductor field effect transistors based devices is the use of rare earth oxides. When these oxides are deposited as epitaxial thin films, they demonstrate dielectric properties that differ greatly from those that are known for bulk oxides. Using structural and spectroscopic techniques, as well as first-principles calculations, Gd{sub 2}O{sub 3} films deposited on Si (111) and Ge (111) were characterized. It was seen that the same 4 nm thick film, grown simultaneously on Ge and Si, presents an unstrained lattice on Ge while showing a metastable phase on Si. This change from the cubic lattice to the distorted metastable phase is characterized by an increase in the dielectric constant of more than 30% and a change in band gap. The case in study shows that extreme structural changes can occur in ultra-thin epitaxial rare earth oxide films and modify their dielectric properties when the underlying substrate is altered.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2017

Extreme Carrier Depletion and Superlinear Photoconductivity in Ultrathin Parallel-Aligned ZnO Nanowire Array Photodetectors Fabricated by Infiltration Synthesis

Ultrathin semiconductor nanowires enable high-performance chemical sensors and photodetectors, but their synthesis and device integration by standard complementary metal-oxide-semiconductor (CMOS)-compatible processes remain persistent challenges. This work demonstrates fully CMOS-compatible synthesis and integration of parallel-aligned polycrystalline ZnO nanowire arrays into ultraviolet photodetectors via infiltration synthesis, material hybridization technique derived from atomic layer deposition. The nanowire photodetector features unique, high device performances originating from extreme charge carrier depletion, achieving photoconductive on–off ratios of >6 decades, blindness to visible light, and ultralow dark currents as low as 1 fA, the lowest reported for nanostructure-based photoconductive photodetectors. Surprisingly, the low dark current is invariant with increasing number of nanowires and the photodetector shows unusual superlinear photoconductivity, observed for the first time in nanowires, leading to increasing detector responsivity and other parameters for higher incident light powers. Temperature-dependent carrier concentration and mobility reveal the photoelectrochemical-thermionic emission process at grain boundaries, responsible for the observed unique photodetector performances and superlinear photoconductivity. Here, the results elucidate fundamental processes responsible for photogain in polycrystalline nanostructures, providing useful guidelines for developing nanostructure-based detectors and sensors. Lastly, the developed fully CMOS-compatible nanowire synthesis and device fabrication methods also have potentials for scalable integration of nanowire sensor devices and circuitries.

36 MATERIALS SCIENCE↗
DOE OSTI2024

A butterfly-shaped acceptor with rigid skeleton and unique assembly enables both efficient organic photovoltaics and high-speed organic photodetectors

ABSTRACT It remains challenging to design efficient bifunctional semiconductor materials in organic photovoltaic and photodetector devices. Here, we report a butterfly-shaped molecule, named WD-6, which exhibits low energy disorder and small reorganization energy due to its enhanced molecular rigidity and unique assembly with strong intermolecular interaction. The binary photovoltaic device based on PM6:WD-6 achieved an efficiency of 18.41%. Notably, an efficiency of 19.42% was achieved for the ternary device based on PM6:BTP-eC9:WD-6. Moreover, the photodetection device based on WD-6 demonstrated an ultrafast response speed (205 ns response time at λ of 820 nm) and a high cutoff frequency of −3 dB (2.45 MHz), surpassing the values of most commercial Si photodiodes. Based on these findings, we showcased an application of the WD-6-based photodetection device in high-speed optical communication. These results offer valuable insights into the design of organic semiconductor materials capable of simultaneously exhibiting high photovoltaic and photodetective performance.

Science & Technology - Other Topics↗
DOE OSTI2016

Interlayer exciton optoelectronics in a 2D heterostructure p–n junction

Semiconductor heterostructures are backbones for solid-state-based optoelectronic devices. Recent advances in assembly techniques for van der Waals heterostructures have enabled the band engineering of semiconductor heterojunctions for atomically thin optoelectronic devices. In two-dimensional heterostructures with type II band alignment, interlayer excitons, where Coulomb bound electrons and holes are confined to opposite layers, have shown promising properties for novel excitonic devices, including a large binding energy, micron-scale in-plane drift-diffusion, and a long population and valley polarization lifetime. Here, we demonstrate interlayer exciton optoelectronics based on electrostatically defined lateral p–n junctions in a MoSe 2 –WSe 2 heterobilayer. Applying a forward bias enables the first observation of electroluminescence from interlayer excitons. At zero bias, the p–n junction functions as a highly sensitive photodetector, where the wavelength-dependent photocurrent measurement allows the direct observation of resonant optical excitation of the interlayer exciton. The resulting photocurrent amplitude from the interlayer exciton is about 200 times smaller than the resonant excitation of intralayer exciton. This implies that the interlayer exciton oscillator strength is 2 orders of magnitude smaller than that of the intralayer exciton due to the spatial separation of electron and hole to the opposite layers. Lastly, these results lay the foundation for exploiting the interlayer exciton in future 2D heterostructure optoelectronic devices.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Nanoscale Editing of Multi and Single Layer Tungsten Disulfide via Gas‐Assisted Focused Electron Beam Induced Etching for Device Prototyping

Focused electron beam induced etching (FEBIE) with XeF 2 (xenon difluoride) precursor is conducted on multi-layer exfoliated WS 2 (tungsten disulfide) and monolayer WS 2 grown by chemical vapor deposition (CVD). The films are characterized by atomic force microscopy (AFM) and Raman and photoluminescence (PL) spectroscopy post-etching. The etch rates/efficiencies are reported as a function of electron beam energy, current, dwell time, and XeF 2 pressure. Bulk film Raman spectra are unchanged post-FEBIE, indicating minimal subsurface damage. Monolayer WS 2 shows a decrease in Raman and PL intensity post-FEBIE, with a dose-to-clear of ≈2 nC µm −2 . The study reveals regimes affected by the various mass transport contributions such as refresh time and the ratio of electrons/XeF 2 . Spontaneous etching was discovered during FEBIE of large patterned areas due to the long frame/refresh times. Density functional theory and ab initio molecular dynamics simulations compares desorption of SF x and WF x molecules from pristine WS 2 basal planes and pore edges, revealing the spontaneous etching is consistent with etching of partially etched monolayers during each frame. Single-line etching width of 21 nm, and patterning flakes into 100 nm wide channels are demonstrated. In conclusion, this work demonstrates the possibility of editing WS 2 flakes into electronic devices of arbitrary dimensions for semiconductor applications.

2D materials↗
DOE OSTI2019

Electric-field effect on photoluminescence of lead-halide perovskites

With the development of novel semiconductors for optoelectronic applications, new device functionalities utilizing unique characteristics of emerging materials can be particularly appealing. Here, we demonstrate a reversible control of photoluminescence (PL) emission from lead-halide perovskites achieved in perovskite electric-double-layer transistors. PL in several prototypical lead-halide perovskite compounds is shown to be reversibly tuned by a small gate voltage in the range ±1.2 V applied to the ionic-liquid gel on the perovskite surface, with the intensity modulation that can reach one to two orders of magnitude. This effect may be mediated by a reversible migration of oxygen ions affecting the crystal region near the interface with the ion gel. The resulting passivation (or activation) of non-radiative recombination centers (traps) by oxygen ions would then modulate the population of mobile photogenerated electrons and holes that give rise to PL, which is thus tuned with an electric “knob” (the gate) in these devices.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Novel white light-emitting CdSe:Mn 2+ synthesized by photo-assisted chemical bath deposition

Nowadays, white light-emitting materials have attracted extensive research due to their potential applications in lighting devices and displaying images. Several semiconductor nanoparticles have been explored to achieve efficient white light emission. In this work, we report on novel white light-emitting CdSe:Mn 2+ thin films synthesized by photo-assisted chemical bath deposition. The effect of varying the Mn 2+ ion concentrations on the thin film structure, morphology, and optical properties was investigated. X-ray powder diffraction results indicated that all the films annealed at 250 degrees C possessed a cubic structure, with crystallite sizes in the range of 1-130 nm. Scanning electron microscopy demonstrated spherical nanoparticles with no significant changes with varying Mn 2+ doping concentrations. Energy dispersive X-ray spectroscopy confirmed the presence of the anticipated elements. The atomic force microscope revealed that the surface roughness has decreased with an increase in Mn 2+ ion concentrations but decreased for 0.7 %Mn 2+ . The UV-Vis absorption spectra showed absorption edges around 600-650 nm. Photoluminescence emission spectra excited at 3.8 eV (325 nm) showed emission bands at around 1.75 eV (709 nm), and 1.88 eV (659 nm), which were attributed to the band-to-band emission, and 4 T 1 ( 4 G)-> 6 A 1 ( 6 S) transitions of Mn 2+ ions, respectively, while emission bands at 2.35 eV (528 nm), and prominent at 3.17 eV (391 nm) were due to the glass substrate. The temperature-dependent luminescence showed a decrease in relative emission intensity with the increase in the operating temperature. The chromaticity colour coordinates showed white light-emitting thin films. These present findings open a new door to developing white light using CdSe thin films.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Synthesis and Physical Properties of Manganese Chromium Nitride Thin Films Grown via Molecular Beam Epitaxy

Here, we demonstrate the ability to grow epitaxial thin films of manganese–chromium nitride (Mn x Cr 1–x N) across the entire composition range on magnesium oxide (MgO) (1 0 0) surfaces by molecular beam epitaxy. By independently controlling the ratio of the atomic fluxes of manganese and chromium, the compositional dependence of structural and electrical transport properties is determined. Soft X-ray absorption shows that the valence states of Cr( 3+ ) and Mn( 3+ ) remain identical among these MnCrN epitaxial films. The metallic transport behavior of binary manganese nitride (MnN) and chromium nitride (CrN) is suppressed in the ternary alloys. Changes in room temperature electrical resistivity of up to 100 times and 5 orders of magnitude at cryogenic temperatures are observed. This work expands the variety of nitride compounds available for epitaxial integration and could provide additional flexibility for the development of metal–semiconductor–insulator junctions for spintronic devices.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Bidirectional Suzuki Catalyst Transfer Polymerization of Poly( p -phenylene)

Suzuki catalyst transfer polymerization (SCTP) has emerged as an effective method for accessing length-controlled π-conjugated poly(p-phenylene). Regio-controlled functional group sequencing along the backbone and the chain ends of synthetic polymers remains a challenge for the successful integration of organic semiconductors in sensors and electronic devices. Here, we report a bidirectional SCTP system based on dinuclear palladium(II) initiators. Functional groups transferred during the initiation and termination steps unlock independently addressable synthetic handles at the polymer core and respective chain ends. These functional groups open opportunities for late-stage regio-controlled and chemoselective derivatizations. Control over key polymer parameters, including molecular weight (M n ), dispersity ( Đ = M w /M n ), degree of polymerization ( DP ), termination efficiency, and functional group interconversion, is corroborated by size exclusion chromatography (SEC) and NMR spectroscopy. The modular design of SCTP initiators, in combination with commercially available terminating groups, represents a highly flexible toolbox for late-stage polymer conjugation, e.g., chemoselective anchoring groups for integration with functional electronics or bioorthogonal conjugation for molecular sensing.

Aldehydes↗
DOE OSTI2022

Alkaline-Earth Chalcogenide Nanocrystals: Solution-Phase Synthesis, Surface Chemistry, and Stability

Increasing demand for effective energy conversion materials and devices has renewed interest in semiconductors comprised of earth-abundant and biocompatible elements. Alkaline-earth sulfides doped with rare earth ions are versatile optical materials. However, relatively little is known about controlling the dimensionality, surface chemistry, and inherent optical properties of the undoped versions of alkaline-earth monoand polychalcogenides. Here, we describe the colloidal synthesis of alkaline-earth chalcogenide nanocrystals through the reaction of metal carboxylates with carbon disulfide or selenourea. Systematic exploration of the synthetic phase space allows us to tune particle sizes over a wide range using a mixture of commercially available carboxylate precursors. Solid-state NMR spectroscopy confirms the phase purity of the selenide compositions. Surface characterization reveals that bridging carboxylates and amines preferentially terminate the surface of the nanocrystals. While these materials are colloidally stable in the mother solution, the selenides are susceptible to oxidation over time, eventually degrading to selenium metal through polyselenide intermediates. As part of these investigations, we have developed the colloidal syntheses of barium di- and triselenides, two among few reported nanocrystalline alkaline-earth polychalcogenides. Electronic structure calculations reveal that both materials are indirect band gap semiconductors. The colloidal chemistry presented here may enable the synthesis of more complex, multinary chalcogenide materials containing alkaline-earth elements.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Structural and Dynamic Disorder, Not Ionic Trapping, Controls Charge Transport in Highly Doped Conducting Polymers

Doped organic semiconductors are critical to emerging device applications, including thermoelectrics, bioelectronics, and neuromorphic computing devices. It is commonly assumed that low conductivities in these materials result primarily from charge trapping by the Coulomb potentials of the dopant counter-ions. Here, we present a combined experimental and theoretical study rebutting this belief. Using a newly developed doping technique, we find the conductivity of several classes of high-mobility conjugated polymers to be strongly correlated with paracrystalline disorder but poorly correlated with ionic size, suggesting that Coulomb traps do not limit transport. A general model for interacting electrons in highly doped polymers is proposed and carefully parameterized against atomistic calculations, enabling the calculation of electrical conductivity within the framework of transient localisation theory. Theoretical calculations are in excellent agreement with experimental data, providing insights into the disordered-limited nature of charge transport and suggesting new strategies to further improve conductivities.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2017

Electrically driven deep ultraviolet MgZnO lasers at room temperature

Semiconductor lasers in the deep ultraviolet (UV) range have numerous potential applications ranging from water purification and medical diagnosis to high-density data storage and flexible displays. Nevertheless, very little success was achieved in the realization of electrically driven deep UV semiconductor lasers to date. Here, we report the fabrication and characterization of deep UV MgZnO semiconductor lasers. These lasers are operated with continuous current mode at room temperature and the shortest wavelength reaches 284 nm. The wide bandgap MgZnO thin films with various Mg mole fractions were grown on c-sapphire substrate using radio-frequency plasma assisted molecular beam epitaxy. Metal-semiconductor-metal (MSM) random laser devices were fabricated using lithography and metallization processes. Besides the demonstration of scalable emission wavelength, very low threshold current densities of 29-33 A/cm 2 are achieved. Furthermore, numerical modeling reveals that impact ionization process is responsible for the generation of hole carriers in the MgZnO MSM devices. The interaction of electrons and holes leads to radiative excitonic recombination and subsequent coherent random lasing.

36 MATERIALS SCIENCE↗
DOE OSTI2013

Tunable metamaterials based on voltage controlled strong coupling

We present the design, fabrication, and realization of an electrically tunable metamaterial operating in the mid-infrared spectral range. Our devices combine intersubband transitions in semiconductor quantum-wells with planar metamaterials and operate in the strong light-matter coupling regime. The resonance frequency of the intersubband transition can be controlled by an external bias relative to the fixed metamaterial resonance. This allows us to switch dynamically from an uncoupled to a strongly coupled system and thereby to shift the eigenfrequency of the upper polariton branch by 2.5 THz (corresponding to 8% of the center frequency or one full linewidth) with a bias of 5 V.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Photothermoelectric effect in cadmium arsenide thin films for unbiased, mid-infrared photodetection

Mid-infrared photodetectors that can operate at room temperature are of great interest for a wide range of applications. Here, we demonstrate unbiased, mid-infrared (10.4 μm) photodetection in epitaxial thin films of the three-dimensional Dirac semimetal cadmium arsenide (Cd 3 As 2 ), which are grown on a III–V heterostructure. We show that the photocurrent response of planar metal–Cd 3 As 2 –metal devices is consistent with the photothermoelectric effect, which is due to a temperature gradient that develops under asymmetric illumination of the device. We show that the photoresponsivity of Cd 3 As 2 channel devices is an order of magnitude greater than devices with a III–V semiconductor channel, attesting to the excellent thermoelectric properties of Cd 3 As 2 and promising efficient unbiased, room-temperature mid-infrared photodetection.

36 MATERIALS SCIENCE↗
DOE OSTI2019

Tailoring the growth and electronic structures of organic molecular thin films

In the rapidly developing electronics industry, it has become increasingly necessary to explore materials that are cheap, flexible and versatile which have led to significant research efforts towards organic molecular thin films. Organic molecules are unique compared to their inorganic atomic counterparts as their properties can be tuned drastically through chemical functionalization, offering versatility, though their extended shape and weak intermolecular interactions bring significant challenges to the control of both the growth and the electronic structures of molecular thin films. Herein, we will review the self-assembly process and how to establish long-range ordered organic molecular thin films. We will also discuss how the electronic structures of thin films are impacted by the molecule’s local electrostatic environment and its interaction with the substrate, within the context of controlling interfacial energy level alignment between organic semiconductors and electrodes in electronic devices.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Trap Passivation for Reducing On-Resistance and Saturation Voltage in Wafer-Bonded InGaAs-Channel/GaN-Drain Vertical FETs

High frequency and high power are the driving forces behind semiconductor transistor technology. However, conventional devices have the tradeoff of either being high speed or high breakdown—but not both. Wafer-bonded current aperture vertical electron transistors (BAVETs) help eliminate the tradeoff by combining a high-speed III-As channel to a high-breakdown III-N drift region. The device presented herein comprises of an InAlAs gate-barrier/InGaAs channel, wafer-bonded to an InGaN/GaN drift region, with the InGaAs/InGaN interface referred to as the wafer-bonded interface (WBI). The electronic behavior of WBIs is yet less known but necessary in realizing the potential of a BAVET. Herein, strong trap activity at the WBI is shown to be the cause of abnormally high saturation voltage ( V DS_SAT ) in BAVETs. The traps cause unintentional space charge (SC) region in the drain region of the device. This causes a drain resistance, a higher ON-resistance ( R ON ), and a higher V DS_SAT . Here, the challenge is overcome by hydrogen passivation of traps at WBI by using a p-doping for the InAlAs layer, which reduces the trap-charge concentration at the WBI. Consequently, the width of the SC region is reduced and a reduction in V DS_SAT is demonstrated, wherein it reduces from >12 to 5 V.

36 MATERIALS SCIENCE↗