Engineering PapersSearch

DOE OSTI · 2572605

Novel white light-emitting CdSe:Mn 2+ synthesized by photo-assisted chemical bath deposition

Abstract

Nowadays, white light-emitting materials have attracted extensive research due to their potential applications in lighting devices and displaying images. Several semiconductor nanoparticles have been explored to achieve efficient white light emission. In this work, we report on novel white light-emitting CdSe:Mn 2+ thin films synthesized by photo-assisted chemical bath deposition. The effect of varying the Mn 2+ ion concentrations on the thin film structure, morphology, and optical properties was investigated. X-ray powder diffraction results indicated that all the films annealed at 250 degrees C possessed a cubic structure, with crystallite sizes in the range of 1-130 nm. Scanning electron microscopy demonstrated spherical nanoparticles with no significant changes with varying Mn 2+ doping concentrations. Energy dispersive X-ray spectroscopy confirmed the presence of the anticipated elements. The atomic force microscope revealed that the surface roughness has decreased with an increase in Mn 2+ ion concentrations but decreased for 0.7 %Mn 2+ . The UV-Vis absorption spectra showed absorption edges around 600-650 nm. Photoluminescence emission spectra excited at 3.8 eV (325 nm) showed emission bands at around 1.75 eV (709 nm), and 1.88 eV (659 nm), which were attributed to the band-to-band emission, and 4 T 1 ( 4 G)-> 6 A 1 ( 6 S) transitions of Mn 2+ ions, respectively, while emission bands at 2.35 eV (528 nm), and prominent at 3.17 eV (391 nm) were due to the glass substrate. The temperature-dependent luminescence showed a decrease in relative emission intensity with the increase in the operating temperature. The chromaticity colour coordinates showed white light-emitting thin films. These present findings open a new door to developing white light using CdSe thin films.

Explore related subjects

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Ntshalintshali, D. [Univ. of the Free State (South Africa)] (ORCID:0000000170129713), Motloung, S. V. [Central Univ. of Technology (South Africa); Sefako Makgatho Health Sciences Univ. (South Africa)], Motaung, T. E. [Sefako Makgatho Health Sciences Univ. (South Africa)], Swart, H. C. [Univ. of the Free State (South Africa)], Kroon, R. E. [Univ. of the Free State (South Africa)], Erasmus, L. J. B. [Univ. of the Free State (South Africa)], Kebede, M. A. [Univ. of South Africa (South Africa)], Hile, D. D. [University of the Free State (South Africa); Joseph Sarwuan Tarka Univ. (Nigeria); Univ. of Zululand (South Africa)], Kingsley, E. [National Renewable Energy Laboratory (NREL), Golden, CO (United States)], Pawade, V. B. [Laxminarayan Innovation Technological Univ. (India)], Koao, L. F. [Univ. of the Free State (South Africa)]. 2025-05-13. Novel white light-emitting CdSe:Mn 2+ synthesized by photo-assisted chemical bath deposition. https://doi.org/10.1016/j.mssp.2025.109669

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related reports

Cyclic moisture reactivation of calcium sorbents for long duration thermochemical energy storage

The transition to a flexible and reliable energy infrastructure, using electro-thermal energy generation technologies such as geothermal, concentrated solar power, and nuclear, usually demands simultaneous advancement of thermal energy storage (TES) to support on-demand electricity generation and industrial applications while mitigating the inherent intermittency of renewable energy sources and power outages from direct energy generation. Among TES technologies, thermochemical energy storage (TCES) based on calcium looping emerges as a compelling high-power energy storage candidate due to its high reaction enthalpy, compatibility with elevated operating temperatures, and abundance of low-cost materials. However, the long-term durability of calcium-based sorbents for TCES is hindered by surface sintering and particle aggregation, leading to performance degradation over repeated thermal cycles. This study explores a moisture hydration-based strategy to regenerate a degraded calcium sorbent and mitigate performance degradation for long duration TCES. The addition of moisture transforms calcium oxide into calcium hydroxide and produces intercalation water layers, associated with a regenerated surface area and reduced calcium oxide crystallite size. Both these effects are beneficial in restoring the sorbents' reactivity for carbonization. Additionally, an optimized hydration-assisted reactivation protocol balances the recovered energy storage capacity with heating penalty required for moisture removal from hydrated samples, resulting in an enhanced energy storage capacity up to 176% compared to benchmark sorbents that undergo cycling without reactivation after 60 cycles. In conclusion, these results highlight the potential of hydration-assisted reactivation to enhance the long-term performance of TCES, providing an effective pathway to advancing electro-thermal storage technologies.

36 MATERIALS SCIENCE