Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “LEAD OXIDES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 937 records · Page 52

Hydrogen from the solar photolysis of water

Developments related to the study of photosynthesis are examined and aspects of photosensitization by solids are considered. It is pointed out that solids photosensitization for solar photochemical fuel formation is now an extremely active research area as a consequence of the promising results obtained with semiconductor photoelectrodes. The investigation of water decomposition schemes involving heterogeneous reactions is likely to be a productive area. As is the case for photosynthesis, the known examples of water decomposition by solids photosensitization involve charge separation processes immediately following light absorption. Homogeneous photoredox reactions are also discussed, taking into account thermochemical and photochemical cycles leading to the formation of a photooxidized ion, hydrogen quantum yields in the photo-oxidation aqueous ions, and thermochemical and photochemical cycles leading to the formation of a photoreduced ion.

Ryason, P. R.↗

Evaluating the oxidative, photothermal and electrical stability of colloidal nanocrystal solids

IV-VI quantum dot (QD) solids are a novel class of granular electronic materials with great technological potential (e.g., in photodetectors, field-effect transistors (FETs), and solar cells), but their oxidative and thermal instability present a barrier to practical applications [1]. Poor stability is a fundamental issue facing many nanoscale materials due to high surface area and surface energy. Basic studies are needed to elucidate the most important mechanisms of degradation and develop robust countermeasures if QD materials are to become technologically important. This project determined the degradation mechanisms of IV-VI QD solids (primarily PbSe and PbS) and introduced new chemical strategies to drastically improve their performance, stability, and operating lifetimes [2-5]. Our approach was based on (1) detailed testing of QD thin film materials (principally FETs and solar cells) as a function of oxidative and thermal stress, and (2) the use of organic and inorganic approaches to link the QDs into strongly electronically coupled, high-mobility films, prevent their oxidation, and eliminate internal degrees of freedom that lead to film instability and degradation in response to electrical and thermal stress. Stability against oxidation and thermal degradation was the major focus of this project. We have evaluated the stability of QD thin films and interfaces at temperatures less than 100°C (the regime most relevant to solar and transistor applications). Low-temperature oxidation and sintering of QD films have been investigated using optical absorption spectroscopy, Fourier transform infrared spectroscopy (FTIR), current-voltage scanning of transistors and solar cells, X-ray photoelectron spectroscopy, and scanning Kelvin probe microscopy (SKPM). SKPM was used to map the potential profiles of operating QD FETs and solar cells as a function of bias and illumination, which provides detailed information on how the work functions, potential drops and electric field within these devices determine device operation, and set the stage for future studies targeted at understanding and preventing device failure. We pursued two strategies to fabricate QD films with stable electrical characteristics: (1) the use of robust molecular surface ligands [2], and (2) “matrix engineering,” i.e., infilling the QD solid with metal oxide or metal sulfide matrices by low-temperature atomic layer deposition (ALD) to passivate surface states, prevent oxidation, lock the QDs into position, inhibit diffusion, and tune the height and width of the inter-QD potential barriers that govern charge transport [5,6]. Poor stability is a common feature of nanoscale electronic materials, yet stability is all too rarely the focus of basic research. Fundamental studies are therefore needed to elucidate the most important mechanisms of degradation and develop simple yet effective countermeasures. By revealing both how QD solids degrade in response to environmental stresses (oxidative, photothermal, and electric) and how to prevent this degradation, the project has greatly improved our ability to develop stable, high-performance QD materials for real-world applications.

36 MATERIALS SCIENCE↗

Reevaluation of XPS Pt 4f peak fitting: Ti 3s plasmon peak interference and Pt metallic peak asymmetry in Pt@TiO2 system

The structural, electronic, and electrochemical properties of noble metals supported on transition metal oxides, such as Pt nanoparticles (NPs) supported on TiO2 (Pt@TiO2), have been extensively studied for their relevance to energy technologies, including photocatalysis, electrocatalysis, and electrochemical energy conversion. As the need to lower the amount of Pt and other noble metals used in energy conversion systems becomes urgent, it is essential to accurately quantify the loading of these metals and electronic density redistribution between them and their supports. X-ray photoelectron spectroscopy (XPS) is widely used for the identification and quantification of chemical species. In particular, fitting of the Pt 4f spectra for Pt@TiO2 is frequently performed to determine the chemical environment and oxidation state of Pt, which strongly affect the physical behavior and catalytic performance of this system. Here, we show that neglecting contributions due to the Pt surroundings and the asymmetry of the Pt metal peak in the line shape fitting can lead to severe mischaracterization of the oxidation state of Pt. We quantify the effects of background contributions that stem from the TiO2 support and discuss how factoring in the strong asymmetry of Pt 4f doublets, which stems from the shake-up type processes, affects the interpretation of Pt 4f XPS line shape.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Complex reactions on a convertible catalyst surface: A study of the S-O-Cu system

The interaction of clean and partially oxidized Cu(110) with sulphur was studied by scanning tunneling microscopy and density functional theory calculations in the low-coverage range. On the clean Cu surface individual S atoms adsorb in the troughs between the Cu atom rows. Hollow sites are preferred, but long-bridge sites are occasionally occupied as well. The majority of adsorbed S, however, seems to be involved in the formation of highly mobile Cu x S y clusters of various sizes. The clusters preferentially attach to steps thus changing the step morphology completely. Some of the clusters form aggregates on the terraces. On the partially oxidized surface similar clusters form and cause long-range mass transport to steps. Additionally, nanowires form in [001] direction on and along the surface oxide stress domains. These nanowires have a complex composition, exhibit different corrugations and appear sometimes as three-dimensional needles. Occasionally they flip their direction by 90°, but doing so they partially decompose. Finally, annealing of the S-O-Cu surface leads to consumption of the surface oxide stripes indicating loss of oxygen presumably via SO 2 formation. Simultaneously, linear sulphur chains suspended between the [001] –O-Cu-O- chains form in [11¯0] direction. The surprising multitude of processes and products even at low-pressure, low-temperature conditions in the comparatively simple S-O-Cu system highlights the difficulty of controlling reactivity and selectivity on such convertible catalyst surfaces.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Directional Gateway to Metal Oxidation: 3D Chemical Mapping Unfolds Oxygen Diffusional Pathways in Rhodium Nanoparticles

The interaction of oxygen with a reactive metal is ubiquitous, yet the precise atomic-level mechanisms and pathways leading to the formation of a surface oxide are not well-understood. We report oxygen atom distributions inside Rh single nanoparticles using atom probe microscopy (APM) and demonstrate that mainly facets of the ?022¯? crystallographic directions act as oxygen-permeable gateways. The highly anisotropic spatial distribution of incorporated oxygen atoms is in agreement with video-field emission analyses according to which {113} facets of the ?022¯? zones act as portals for subsurface diffusion. In addition to providing a more fundamental understanding of the precursor states to metal corrosion, in particular for the case of nanosized metal particles, our studies are also relevant for heterogeneous catalysis where catalytic activity and selectivity conform to reaction-induced structural changes of metal nanoparticles.

Lambeets, Sten V M.↗

Generalized large-scale synthesis of MTiO{sub 3} (M = Ba, Sr, Pb) nanocrystals

A general hydrothermal synthesis technique has been developed for the large-scale preparation of perovskite oxide nanocrystals of BaTiO{sub 3} (BT), SrTiO{sub 3} (ST) and PbTiO{sub 3} (PT). X-ray diffraction pattern (XRD) and Raman spectrum revealed that tetragonal BT was successfully synthesized. The obtained ST and PT were in cubic and tetragonal phase, respectively. Scanning electronic microscopy (SEM) and transmission electronic microscopy (TEM) images showed that all of the products were on nanometer scale. These nanocrystals should provide an ideal candidate for fundamental studies of nanoscale ferroelectricity, piezoelectricity, and paraelectricity. Meanwhile, the synthetic strategy may be easily extended to prepare other nearly monodispersed nanocrystals of perovskite oxides or solid solutions. The relative studies are in progress and will be reported later.

36 MATERIALS SCIENCE↗

Diffusion and interface evolution during the atomic layer deposition of TiO{sub 2} on GaAs(100) and InAs(100) surfaces

Atomic layer deposition is used to form TiO{sub 2} films from tetrakis dimethyl amino titanium and H{sub 2}O on native oxide GaAs(100) and InAs(100) surfaces. The evolution of the film/substrate interface is examined as a function of the deposition temperature (100–325 °C) using ex situ x-ray photoelectron spectroscopy. An increase in the deposition temperature up to 250 °C leads to enhancement of the native oxide removal. For depositions at 300 °C and above, interface reoxidation is observed during the initial deposition cycles but when the films are thicker than 3 nm, the surface oxides are removed steadily. Based on these observations, two distinct film growth regimes are identified; up to 250 °C, layer-by-layer dominates while at higher temperatures island growth takes over. Angle resolved x-ray photoelectron spectroscopy measurements performed on 3 nm TiO{sub 2} film deposited at 325 °C on both surfaces demonstrates a very important difference between the two substrates: for GaAs the native oxides remaining in the stack are localized at the interface, while for InAs(100), the indium oxides are mixed in the TiO{sub 2} film.

36 MATERIALS SCIENCE↗

Tungsten Catalyst Incorporating a Well‐Defined Tetracoordinated Aluminum Surface Ligand for Selective Metathesis of Propane, [(≡Si−O−Si≡)(≡Si−O−) 2 Al−O−W(≡C t Bu) (H) 2 ]

Abstract A well‐defined aluminium‐bound hydroxyl group on the surface of mesoporous SBA‐15, [(≡Si−O−Si≡) (≡Si−O) 2 Al−OH], 3 was obtained by reacting di‐isopropyl aluminium hydride with SBA‐15 treated at 700 °C. The resulting surface [(≡Si−O−Si≡) (≡Si−O) 2 Al (isobutyl) fragment undergoes β‐H elimination at 400 °C leading to [(≡Si−O−Si≡)(≡Si−O−) 2 Al−O) Al−H]. Further oxidation of this Al‐hydride with N 2 O leads to 3 . This acidic support was used to create a well‐defined surface organo‐tungsten fragment [(≡Si−O−Si≡)(≡Si−O−) 2 Al−O−W(≡C t Bu)(CH 2 tBu) 2 ] by reacting 3 with W(≡C‐ t Bu)(CH 2 ‐ t Bu) 3 . A further reaction with hydrogen under mild conditions afforded the tungsten carbyne bis‐hydride [(≡Si−O−Si≡)(≡Si−O−) 2 Al−O−W(H) 2 (≡C‐ t Bu)]. The performance of each of the W‐supported catalysts was assessed for propane metathesis in a flow reactor at 150 °C. [(≡Si−O−Si≡)(≡Si−O−) 2 Al−O−W(≡C t Bu)(H) 2 ] was found to be a single‐site catalyst, giving the highest turnover number (TON=800) and the highest reported selectivity for butane (45 %) vs . ethane (32 %) known for oxide‐supported tungsten complex catalysts (with the supports being silica, silica‐alumina, and alumina). The results demonstrate that modification of the oxide ligands on silica via the creation of Al Lewis acid center as an anchoring site for organometallic complexes opens up new catalytic properties, markedly enhancing the catalytic performance of supported organo‐tungsten species.

Werghi, Baraa↗

Percolation conductivity in hafnium sub-oxides

In this study, we demonstrated experimentally that formation of chains and islands of oxygen vacancies in hafnium sub-oxides (HfO{sub x}, x < 2) leads to percolation charge transport in such dielectrics. Basing on the model of Éfros-Shklovskii percolation theory, good quantitative agreement between the experimental and theoretical data of current-voltage characteristics was achieved. Based on the percolation theory suggested model shows that hafnium sub-oxides consist of mixtures of metallic Hf nanoscale clusters of 1–2 nm distributed onto non-stoichiometric HfO{sub x}. It was shown that reported approach might describe low resistance state current-voltage characteristics of resistive memory elements based on HfO{sub x}.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

A Review of the Influence of Processing Parameters on ODS Steels Produced via Additive Manufacturing Techniques

Abstract This paper reviews current observations regarding processing conditions for oxide dispersion-strengthened steels consolidated through additive manufacturing techniques. Variations in ODS steels observed across process parameters include changes in grain size, grain texture, oxide size, density of oxides, porosity, melt pool characteristics, and mechanical properties. These properties were then compared across techniques to understand which techniques and processing conditions lead to the highest strength, ductility, and oxide density. Current literature suggests that a mix of grain types, in the form of either morphology or phase, can significantly increase the strength of printed ODS steels. Meanwhile, the most ductile samples, regardless of consolidation technique or matrix material, were made from feedstock with oxide additions located on the powder surface. Reported grain and oxide sizes were plotted against the ratio of laser power to scan speed, volumetric energy density, and normalized enthalpy. No strong correlation between these values and microstructural features was observed. The plots that were made suggest that a larger data set, more in-depth representative equations, and more defined material properties as a function of specific feedstock used are necessary to determine a value that can be correlated to the printed ODS steel microstructure.

deJong, Matthew↗

Whisker formation in Sn and Pb-Sn coatings: Role of intermetallic growth, stress evolution, and plastic deformation processes

We have simultaneously measured the evolution of intermetallic volume, stress, and whisker density in Sn and Pb-Sn alloy layers on Cu to study the fundamental mechanisms controlling whisker formation. For pure Sn, the stress becomes increasingly compressive and then saturates, corresponding to a plastically deformed region spreading away from the growing intermetallic particles. Whisker nucleation begins after the stress saturates. Pb-Sn layers have similar intermetallic growth kinetics but the resulting stress and whisker density are much less. Measurements after sputtering demonstrate the important role of the surface oxide in inhibiting stress relaxation.

36 MATERIALS SCIENCE↗

Velocity of action of oxygen, hydrogen sulfide, and halogens on metals

This report discusses a method of determining the rate of surface oxidation of a metal by the change in the color of the surface film produced by reactions with oxygen, chlorine, or iodine. The metals studied included iron, nickel, copper, zinc, cadmium, tin, lead, cobalt, and manganese. Tables are given for surface film thickness versus color for various times.

TIN↗

Evidence for decoupled electron and proton transfer in the electrochemical oxidation of ammonia on Pt(100)

The two traditional mechanisms of the electrochemical ammonia oxidation consider only concerted proton-electron transfer elementary steps and thus they predict that the rate–potential relationship is independent of the pH on the pH-corrected RHE potential scale. In this letter we show that this is not the case: the increase of the solution pH shifts the onset of the NH 3 -to-N 2 oxidation on Pt(100) to lower potentials and also leads to higher surface concentration of formed N Oad before the latter is oxidized to nitrite. Therefore, we present a new mechanism for the ammonia oxidation which incorporates a deprotonation step occurring prior to the electron transfer. The deprotonation step yields a negatively charged surface-adsorbed species which is discharged in a subsequent electron transfer step before the N–N bond formation. The negatively charged species is thus a precursor for the formation of N 2 and NO. The new mechanism should be a future guide for computational studies aiming at the identification of intermediates and corresponding activation barriers for the elementary steps. As a result, ammonia oxidation is a new example of a bond-forming reaction on (100) terraces which involves decoupled proton-electron transfer.

ammonia oxidation↗

Interfacial characterization in carbon nanotube reinforced aluminum matrix composites

In this work, the effects of the sintering parameters, such as temperature and the techniques used (HP and SPS), on CNT/Al composite interfaces are studied. The major role of the native aluminum oxide (Al{sub 2}O{sub 3}) layer covering the aluminum grains is highlighted. It is shown that, for a sintering temperature below 620 °C, the amorphous Al{sub 2}O{sub 3} layer prevents the reaction between aluminum and carbon. For greater sintering temperatures, the breaking of the oxide layer due to its crystallization leads to the formation of aluminum carbide (Al{sub 4}C{sub 3}) by reaction between aluminum and the CNT. The Al{sub 4}C{sub 3} crystals grow perpendicularly to the matrix grain boundaries by thermally activated diffusion of the carbon atoms coming from the CNT. It is also demonstrated that, by limiting the sintering time, which is the case in SPS, it is possible to limit the growth of the Al{sub 4}C{sub 3} crystals and thus to preserve the CNT. - Highlights: • The high reactivity between CNT and Al matrix, resulting Al{sub 4}C{sub 3} formation during the sintering process is highlighted. • We demonstrate, thanks to in-situ TEM observations, that Al{sub 4}C{sub 3} crystals grow into aluminum grains by carbon diffusion. • The native aluminum oxide around the aluminum particles prevents the diffusion of carbon into the aluminum grains. • We show that the protective layer can be broken because of its crystallization, leading to the formation of Al{sub 4}C{sub 3}. • SPS, by limiting the sintering duration, is an interesting way for preparing CNT/Al composites without carbide formation.

36 MATERIALS SCIENCE↗

Amorphous iron-(hydr) oxide networks at liquid/vapor interfaces: In situ X-ray scattering and spectroscopy studies

Surface sensitive X-ray reflectivity (XR), fluorescence (XF), and grazing incidence X-ray diffraction (GIXD) experiments were conducted to determine the accumulation of ferric iron Fe (III) or ferrous iron Fe (II) under dihexadecyl phosphate (DHDP) or arachidic acid (AA) Langmuir monolayers at liquid/vapor interfaces. Analysis of the X-ray reflectivity and fluorescence data of monolayers on the aqueous subphases containing FeCl3 indicates remarkably high levels of surface-bound Fe (III) in number of Fe3þ ions per molecule (DHDP or AA) that exceed the amount necessary to neutralize a hypothetically completely deprotonated monolayer (DHDP or AA). These results suggest that nano-scale iron (hydr) oxide complexes (oxides, hydroxides or oxyhydroxides) bind to the headgroups and effectively overcompensate the maximum possible charges at the interface. The lack of evidence of in-plane ordering in GIXD measurements and strong effects on the surface-pressure versus molecular area isotherms indicate that an amorphous network of iron (hydr) oxide complexes contiguous to the headgroups is formed. Similar experiments with FeCl2 generally resulted with the oxidation of Fe (II)–Fe (III) which consequently leads to ferric Fe (III) complexes binding albeit with less iron at the interface. Controlling the oxidation of Fe (II) changes the nature and amount of binding significantly. The implications to biomineralization of iron (hydr) oxides are briefly discussed.

36 MATERIALS SCIENCE↗

Structural basis for proficient oxidized ribonucleotide insertion in double strand break repair

Reactive oxygen species (ROS) oxidize cellular nucleotide pools and cause double strand breaks (DSBs). Non-homologous end-joining (NHEJ) attaches broken chromosomal ends together in mammalian cells. Ribonucleotide insertion by DNA polymerase (pol) μ prepares breaks for end-joining and this is required for successful NHEJ in vivo. We previously showed that pol μ lacks discrimination against oxidized dGTP (8-oxo-dGTP), that can lead to mutagenesis, cancer, aging and human disease. Here we reveal the structural basis for proficient oxidized ribonucleotide (8-oxo-rGTP) incorporation during DSB repair by pol μ. Time-lapse crystallography snapshots of structural intermediates during nucleotide insertion along with computational simulations reveal substrate, metal and side chain dynamics, that allow oxidized ribonucleotides to escape polymerase discrimination checkpoints. Abundant nucleotide pools, combined with inefficient sanitization and repair, implicate pol μ mediated oxidized ribonucleotide insertion as an emerging source of widespread persistent mutagenesis and genomic instability.

60 APPLIED LIFE SCIENCES↗

Electronic and Geometric Contributors to Hydrogen Binding in Uranium Oxide Grain Boundaries

Hydrogen induced corrosion of uranium, which leads to the formation of toxic and pyrophoric UH 3 , raises significant safety concerns for long-term storage of nuclear materials. Previous work suggests hydrogen diffuses through the grain boundaries (GBs) of the passivating oxide layer to initiate hydriding reactions. However, the atomistic mechanisms underlying this phenomenon and the structural factors that control its initiation are not well understood. To address this knowledge gap, here we use a high-throughput density functional theory (DFT) workflow to investigate the adsorption of H and H 2 in the defective bulk UO 2 . Specifically, we have exhaustively investigated the adsorption of H (107 sites) and H 2 (26 sites) in three different coincident site lattice (CSL) GBs: Σ3, Σ5, and Σ9. Compared to the binding energies in pristine UO 2 , we observe significantly stronger hydrogen adsorption at these GB sites. Interestingly, we find that the trends in H and H 2 adsorption vary considerably across the three GB models. In particular, while a small number of sites in Σ5 and Σ9 show exothermic adsorption of H and H 2 , respectively, no such sites are found in Σ3. These results provide fundamental atomistic insights that could guide the development of future corrosion mitigation strategies for the storage of nuclear materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗