Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “binder”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 919 records · Page 51

Tailoring Cementitious Materials Towards Value-Added Use of Large CO 2 Volumes

A novel method was developed for the use of carbon dioxide as a raw material in production of hydraulic cements. The solid raw materials were selected to produce a chemistry that is amenable to the formation of alkali aluminosilicate hydrates and carbonates. These raw materials were first pelletized using a relatively low moisture content in the presence of carbon dioxide gas. The resulting pellets were then subjected to milling action in the presence of carbon dioxide in order to mechanochemically transform them into a hydraulic cement comprising largely of alkali aluminosilicates and metastable carbonates. Hydration of this hydraulic cement produces an integrated binder comprising largely of alkali aluminosilicate hydrates and finely dispersed crystalline carbonates. Analytical chemistry and physical test methods were employed in order to evaluate the composition and properties of pellets and the resultant hydraulic cement. The CO 2 uptake of the cement was measured at about 10 wt.%, which was raised with increasing milling duration in a carbon dioxide environment. The composition of the hydraulic cement was refined to further increase the use of abundant and market-limited industrial byproducts as raw materials, and to produce a balance of performance characteristics that meet standard requirements. Concrete materials were prepared with the hybrid hydraulic cement developed in the project, and were thoroughly characterized. The hydraulic cement formulation was further refined in order to produce concrete materials with desired deicer salt scaling resistance. The fresh mix attributes of the hybrid cement concrete were thoroughly characterize in order to evaluate its rheological characteristics, bleeding and plastic shrinkage cracking resistance. The resultant concrete was found to produce mechanical, physical and durability characteristics that were superior to those of conventional Portland cement concrete. The fresh mix rheology, bleeding and plastic shrinkage cracking resistance of the hybrid cement concrete were found to be compatible with the mainstream construction practices. Scalability and compatibility with industrial-scale practices are key to the commercial success of the new class of hydraulic cements developed in this project. These attributes cannot be easily assessed in laboratory-scale investigations. Energy-based models were developed to enable scale-up of the process. Pilot-scale implementation of the process in a power plant was successful. Theoretical analyses complemented with pilot-scale experimental investigations indicated that the transformation from laboratory- to pilot-scale mechanochemical processing can reduce the milling duration by up to 85%. The data produced in pilot-scale processing of the hydraulic cement was used to assess the net carbon footprint of the resultant binder, which was found to be negative due to uptake of carbon dioxide in the process. The energy content of the new hydraulic cement was significantly below that of Portland cement, and it also offered favorable economics. Significant support has been raised for industrial-scale demonstration and commercialization of the technology. A theoretical framework was established based on thermodynamic and diffusion principles to explain the mechanochemical capture and value-added use of carbon dioxide in hydraulic cement production.

01 COAL, LIGNITE, AND PEAT↗

Additive Manufacturing for Low Volume Bearings

ORNL worked with the Schaeffler Group USA to explore additive manufacturing techniques that might be appropriate for prototyping of bearing cages. Multiple additive manufacturing techniques were investigated, including e-beam, binder jet and multiple laser based processes. The binder jet process worked best for the thin, detailed cages printed.

36 MATERIALS SCIENCE↗

Gelcasting low-carbon B4C for cermets (Allison intern SULI paper)

A boron carbide (B 4 C) gelcasting suspension involving melamine formaldehyde (MF) resin was developed to obtain green bodies with low carbon after pyrolysis. MF resin allows highly complicated B 4 C parts to be produced with little to no shrinkage when gelcast into molds. A MF binder content of ~7.5 wt % consistently produced green bodies with sufficient strength to withstand demolding and handling. Variations in B 4 C particle size, curing temperature, and pH were investigated in order to optimize the suspension for casting. Resin pyrolysis trials showed that 90.0 ± 0.9 wt % of resin mass was lost during pyrolysis, corresponding to < 1 wt % of binder residual in the overall green bodies. The minimal carbon content in the green bodies is favorable for the infiltration of aluminum into open pore spaces. Due to the high hardness of B 4 C and the ductility of aluminum, the ceramic-metal (cermet) composite formed is ideal for applications such as light-weight armors.

36 MATERIALS SCIENCE↗

Development of Innovative Gas Diffusion Layers for Polymer Electrolyte Membrane Fuel Cells: Final Technical Report

This phase 1 program accomplished its primary goal of reducing the mass transport resistance (MTR) within the gas diffusion layer (GDL). The improvement in MTR was achieved by (1) the reduction of carbonaceous binder content, (2) reduced penetration of the microporous layer (MPL) into the substrate, and (3) a controlled size and frequency of micro-cracks within the MPL. Of these factors, (1) the amount of carbonaceous binder within the GDL substrate showed the greatest potential for a reduction of MTR and should be the focus for future development, preferably in concert with a commercial partner to ensure the material can meet the market requirements.

microporous layer (MPL)↗

Cesium Removal Performance Comparisons of Crystalline Silicotitanate Media Batches with Savannah River Site Waste Simulant

The Tank Closure Cesium Removal (TCCR) system uses ion exchange columns filled with Crystalline Silicotitanate (CST) media to process radioactive waste solutions for the removal of Cs137. TCCR currently focuses on dissolving Savannah River Site (SRS) Tank 10H waste (primarily sodium salt cake solids) within the tank followed by at-tank ion exchange column treatment. Plans are underway to prepare and install a second TCCR unit at SRS. Capacity and particle size differences exist between archived (IE-911) and more recently-prepared CST media batches (9120- B and 9140-B). Side-by-side comparison testing was performed to evaluate the cesium removal performance of each batch to aid in selecting the preferred CST batch and media characteristics to load into the second TCCR unit. Batch contact equilibrium and flow-through column tests have been conducted with three CST batches using an SRS Average Simulant. Simulant batch contact equilibrium cesium loading results for the three CST batches (including two lots of one batch) are provided in Table ES-1. The 35 °C data indicates that the archived IE-911 batch has a higher cesium capacity than recently-prepared CST media and that the minor TCCR CST 9120-B media lot (2099000035) has similar cesium removal performance to the major TCCR lot (2099000034). Tests conducted at 25 ºC for the archived IE-911 CST batch indicated lower cesium removal performance with this simulant batch than was observed recently with a different SRS Average Simulant batch. A dilution factor (DF) is typically utilized when modeling engineered CST media cesium loading performance to account for mass contributions from the binder material. In cases where CST performance is lower than expected, this factor includes corrections for the binder and for low performance. The ZAM (Zheng, Anthony, and Miller) Isotherm Model DF values are provided in Table ES-1 for each simulant batch contact result. DF values near 0.5 were determined for the 9120-B and 9140-B CST batch contact tests while DF values near 0.6 (20% higher) were determined for the tests with IE-911. These dilution factors are lower than recently observed with a different SRS Average Simulant batch (9140-B DF = 0.68; IE-911 DF = 1.0). Based on these results, it appears that some component in the simulant solution used for equilibrium testing may have resulted in reduced cesium loading on the CST media.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Effect of Heterogeneities on the Reaction-zone of a Propagating Detonation Wave

Reactive burn models for propagating detonation waves in an explosive are based on the ZND (Zel'dovich-Von Neumann-Doring) theory. A key property of the ZND theory, which leads to self-sustaining detonation waves, is a sonic point relative to the front in the reaction zone. Moreover, burn models assume the explosive is a homogeneous material. This assumption is used for plastic-bonded explosives, even though they are heterogeneous materials. The heterogeneities are accounted for only with an empirical burn rate. Furthermore, the reaction-zone width can be less than the length scale of heterogeneities. This raises the question of the effect of heterogeneities on the reaction zone. In particular, whether the reaction zone can be steady and have a well defined sonic point. To examine this question we focus on PBX 9501 since there is data on the grain-binder heterogeneities and on the reaction-zone velocity time history of a steady planar detonation wave. Using pseudo-mesoscale 1-D simulations, we examine the effect of a detonation wave transversing explosive and binder segments of random length. The simulations show that the reaction zone is quasi-steady with only short wavelength small amplitude variations in the detonation wave pressure and speed. The main effect of the heterogeneities is to introduce noise in the pressure and velocity fields that propagates into the Taylor wave behind the detonation. This is consistent with the scatter in the reaction-zone measurements for PBX 9501.

42 ENGINEERING↗

Additive Manufacturing of Energy Harvesting Material System for Active Wireless MEMS Sensors

Combustion systems make up a large sum of the world’s yearly energy production despite advances in renewable energy sources. Precise control of pressure and temperature in combustion chambers allows for lower carbon emissions, and overall higher efficiency. Wireless temperature and pressure sensors are critical for the operation of combustion chambers. Energy harvesters have emerged as a viable way to power wireless sensors when heat and mechanical energy are available. Lithium niobate (LNB), barium titanate (BTO), and lead zirconate titanate (PZT) pyroelectric ceramics were studied and fabricated through additive manufacturing (AM) for use as energy harvesting structures in combustion environments. The electric power generation potential of LNB and PZT ceramics was studied by varying the temperature from 50 to 60 °C and by introducing cyclic compression loads of 2000 N amplitude. It was found that thermal energy conversion had the highest output of 500 nW and that combined thermal and mechanical conversion did not increase the harvesting potential because of the competing contributions of both effects. Powder bed and slurry extrusion AM methods were used to fabricate BTO and PZT ceramic structures. Optimization of the powder-based binder jetting method produced BTO ceramics with a relative density of 36.77% a piezoelectric coefficient of 153 pC/N. The density of the ceramics increased up to 56% when increasing the saturation of binder in the powder to because of liquid phase sintering. Finally, PZT structures were manufactured through AM and fin features were added to the design to enhance the heat transfer along the material. The harvested power density of the flat samples was 3.643 μW/cm 3 and of the finned samples was 3.034 μW/cm3. This research paves the ways for the development of self-powered wireless sensors in critical areas of operation such as combustion.

01 COAL, LIGNITE, AND PEAT↗

A viscoelastic viscoplastic damage model (VPVD)

This report documents the development, implementation, and parameter estimation procedures for aviscoelastic-viscoplastic-viscodamage model. This model is being developed to improve the predictive accuracy of simulations involving plastic bonded explosives (PBX). A representative PBX is PBX9501, which is 95% by weight HMX, 2.5% estane binder and 2.5% nitroplasticizer. Mechanical deformation of this material is primarily accommodated by straining of the polymer binder and rearranging the relatively rigid HMX crystals.

45 MILITARY TECHNOLOGY, WEAPONRY, AND NATIONAL DEF↗

DPC Cement Filler Development (Progress Report)

The fillers research and development (R&D) program, mostly experimental, is part of a broader R&D program that includes new process modeling and performance assessment of criticality effects and the overall importance of criticality to repository performance (consequence screening). A literature research and consultation effort with experts by Hardin and Brady (2018) identified several potentially effective and workable filler materials including cements (primarily phosphate based), moltenmetal alloys, and low-temperature glasses. Filler attributes were defined, and the preliminary lists were compared qualitatively. Further comparative analysis will be done (e.g., cost estimates) after experimental screening has narrowed the list of alternatives. The following cement filler compositions were selected for experimental development work and accelerated testing in FY20: Aluminum phosphate cements (APCs); more specifically aluminum oxide / aluminum phosphate (Al 2 O 3 / AlPO 4 ) cements in which Al 2 O 3 serves as the filler material bound by an AlPO 4 binder formed by the reaction of Al 2 O 3 with H 3 PO 4 ; Calcium phosphate cements (CPCs); more specifically composed of pure or nearly pure hydroxyapatite or HAP (Ca 5 (PO 4 ) 3 (OH)); Wollastonite phosphate cements (WPC), specifically wollastonite and aluminum or calcium aluminum phosphates in which CaSiO 3 serves as the filler material and the phosphate serves as the binder. The FY20 effort focused on the optimization of compositions and subsequent processing of these three materials to achieve dense and well-consolidated monolithic samples with 30 to 40% porosity and permeabilities of 1 millidarcy. At the close of this progress report the aluminum phosphate cements (APCs) and the wollastonite phosphate cements (WPCs) appear to show the most promise for continued development. Less progress has been made with the calcium phosphate cements (CPCs); their slurry viscosities are high (and difficult to measure) and they exhibit relatively short cure times of 2 to 3 hours with concomitant and excessive volatile (e.g. CO 2 ) generation.

36 MATERIALS SCIENCE↗

Fluoropolymer Aging Assessments

Fluoropolymer (FP) binders are commonly only a few percent of polymer bonded explosive compositions but they are essential for the mechanical integrity of the part. Because we are using newly manufactured binders, we need to understand how lot variations might affect processing, aging, and mechanical properties. Time, temperature and radiation induce phase changes in fluoropolymers. These phase changes can rearrange the polymer causing crystalline domains to nucleate and grow that can alter mechanical properties. These studies quantify the aging process so that it may be cross correlated with changes in the adhesion, strength, and other properties important for performance.

36 MATERIALS SCIENCE↗

Modified Isotherm Modeling to Predict Cs Exchange with Crystalline Silicotitanate in Tank Waste Simulants

The U.S. Department of Energy is working to expedite processing of Hanford tank waste supernate at the Hanford Waste Treatment and Immobilization Plant. To support this goal, Washington River Protection Solutions is designing a Tank Side Cesium Removal (TSCR) system for suspended solids and cesium (Cs/ 137 Cs) removal from Hanford tank waste supernate. The ion exchange media selected for Cs removal at TSCR is crystalline silicotitanate (CST) that is manufactured in a nearly spherical form by Honeywell UOP LLC (UOP; Des Plaines, IL) as product IONSIV® R9140-B (Na form). The Zheng Anthony Miller (ZAM) isotherm model (Zheng et al. 1997) is a multicomponent ion exchange model used to predict the exchange of Group I metals onto CST. The ZAM isotherm has historically been used to predict Cs distribution values from Hanford and Savannah River Site (SRS) tank waste simulants. Figure S.1 summarizes model predictions from the ZAM isotherm that indicate poor prediction of Cs distribution values for simple and complex simulants with the engineered form of CST, IONSIV® R9140-B, and IONSIV® R9120-B where the solid line indicates a perfect fit by the model. The dotted lines indicate ±20% error. Batch contact testing with Hanford tank waste complex and simple simulants was used in conjunction with SRS simulants to experimentally determine Cs distribution values using a modification to the original isotherm model. The experimentally determined maximum Cs capacity for IONSIV® R9140-B CST in both the simple and complex matrices was found to be 0.53±0.3 mmoles Cs/g of CST. This value is not drastically different from the maximum Cs capacity of 0.58 mmoles Cs/g TAM-5 reported by Zheng et al. (1997). However, it is important to note that TAM-5 (commercially IONSIV® IE-910) is a powder. Hamm et al. (2002) determined that a dilution factor was needed to account for the Zr(OH)2 binder in the engineered form of CST. Hamm et al. determined that a dilution factor of 0.68 was appropriate to account for binder contribution and correct overprediction of Cs exchange on the engineered form of CST in ZAM calculations. This reduced the total capacity from 0.58 mmol/g with TAM-5 to 0.39 mmol/g for the engineered form of CST (Hamm et al. 2002). Despite substituting the experimentally determined maximum Cs capacity of 0.55 mmoles Cs/g for the literature-reported capacity of 0.39 mmoles Cs/g, it was determined that additional modifications to the model’s equilibrium rate constants were necessary in refining the isotherm model. The modified model overpredicted K+ uptake by the CST when compared to digested CST results described by Campbell et al. (2019). The modified model was further revised to omit three of the five K+ exchange equilibrium reactions described by ZAM to reduce the additional K+ loading seen by the model. Figure S.2 summarizes the revised model isotherm predictions plotted against measured Kd values.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

FY2020 Annual Report on Subcontract B631779 with UC Berkeley: Reactive Precursors Additive Manufacturing Report

This work succeeded in reaching each of the stated milestones for developing, printing, reacting, and characterizing the uranium carbide final products. Leveraging experience gained from creating magnesium oxide inks (milestone #1) and prior reactive precursor work with boron carbide (milestone #2) a uranium carbide reactive precursor ink was developed. The chosen composition of ink utilized a mixture of wax, petrolatum, and stearic acid as the binder. The reactive precursor portion of the ink was comprised of uranium oxide and nano particle activated carbon for production of uranium carbide via carbothermal reduction. Following an in-air burnout of the binder at 160C the printed samples were reacted and sintered at 1750C in an argon environment induction furnace. The resulting product has an open porosity dense, foam-like internal structure with a calculated density of 89% in the solid fraction.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗

Large-Scale Additive Manufacturing of Silicon Carbide with Process Monitoring

This report summarizes new capabilities in additive manufacturing (AM) of large-scale silicon carbide (SiC) components under the Advanced Materials and Manufacturing Technologies (AMMT) program. SiC is a promising material that is being considered for many advanced reactor designs due to its high temperature strength, radiation tolerance, minimal neutron absorption, and oxidation resistance [1-8]. One of the primary limitations to using SiC as an in-core structural material is the inability to fabricate large SiC components with complex geometries. While under the former Transformational Challenge Reactor (TCR) program, ceramic AM systems at the Oak Ridge National Laboratory (ORNL) were limited in the quantity and overall size achievable for producing ceramic AM components. To address this, ORNL has improved its infrastructure for binder jet and chemical vapor infiltration (CVI) processes with cutting-edge equipment coming online in a newly renovated laboratory space capable of producing larger components and higher throughput without compromise on part size. This report details the laboratory renovation progress, focusing specifically on the DesktopMetal (formerly ExOne) X25Pro binder jet, a large scale CVI furnace, and the added functionality of a software tool called Peregrine for quality assurance and control purposes.

36 MATERIALS SCIENCE↗

Carbon Electrodes from Powder River Basin Coal Development of Competitive Supercapacitor Electrodes of Diverse Compositions from Coal Extract

Recent demand for coal as a thermal energy source has decreased significantly and will likely continue to decrease as renewable sources of energy become more available and environmental concern and cost from burning coal makes it more costly than renewables. Given that Powder River Basin (PRB) coal in Wyoming has relatively low thermal energy, it is critical for Wyoming to employ coal in other capacities at the current energy transition period in history. Among many potential non-thermal applications, PRB coal can be utilized for membrane and electrode applications through the formation of carbon fibers. Coal-derived membranes can become low-cost, conductive membranes for use in electrodialysis separation processes. Carbon fiber derived electrodes have been shown be a cost-effective alternative to typical electrode materials that can meet or exceed the performance of current carbon electrode materials. In this talk, we demonstrate the manufacture of supercapacitor electrodes from Powder River Basin (PRB) coal-derived precursors. Specifically, PRB coal was treated in cheap solvents, partitioned into liquid extract and solid residue. An electropinning process has been developed that can convert either the liquid extract or the solid residue into carbon fiber mats. The electrospinning process is versatile with many tunable process parameters to achieve desirable physiochemical properties. For example, the coal residue can be manipulated by additional heat treatment, or by adding binders, salts, or surfactants to create a solution that can be electrospun into advanced carbon electrodes with desirable structural and surface properties. Similarly, some of the liquid extract (tar fraction) can be subsequently reacted with toluene diisocyanate to create resinous coal-derived polyurethane (PUs) as a spinnable ink. Carbon nanofiber mats made from our proprietary electrospinning process were further carbonized at temperature ranging from 700°C to 900°C before they are used as electrodes in supercapacitors. Galvanostatic charge-discharge (GCD) results show that the best performing PU fiber mats can deliver a specific capacitance of 604 F g -1 at the current density of 1 A g -1 . A carbon fiber mat from a different solvent extraction residue also delivered the specific capacitance of 508 F g -1 . These specific capacitance values are comparable to or better than commercial activated carbons, demonstrating the viability of manufacturing carbon nanofiber electrodes from coal without the use of a commercial polymer as binder in the spinning ink.

Cincotta, Robert↗

Project Fringe, Testing and Validation on Metal Additive Manufacturing

Oak Ridge National Laboratory (ORNL) worked with Additive Monitoring Systems (AMS) to demonstrate the real-time inspection of additive manufacturing (AM) binder jet fusion 3D printing (BJF). Test coupons on the ExOne Innovent were printed and monitored using AMS’s Project Fringe structured light system. Anomalies were detected automatically and classified post build as recoater powder layer non-uniformities, binder powder interaction, depressions, and sub optimal print area. These anomalies were not apparent in the visual spectrum, which suggests that the structured light system has advanced the monitoring techniques state-of-the-art for BJF.

36 MATERIALS SCIENCE↗

Coal-based Bricks & Blocks (CBBs): Process Development to Prototype Fabrication Coupled with Techno-Economic Analysis and Market Survey

Coal-based bricks and blocks (CBBs) were formulated using anthracite and thermoplastic binder. Lab scale test composites were formed by hot-press molding and commercial extrusion for test articles and for a full-scale prototype. Formulations and test matrices followed a systematic experimental design to examine the effects of and interactions among three primary independent variables: a) thermoplastic type, b) weight fractions of binder relative to the total anthracite weight, and c) relative proportions of large versus small (milled) anthracite size fractions. Technical performance metrics include compressive strength, modulus, porosity/permeability and density. These DoE studies establish composition-property relations and identify the best combination for any desired property of interest – in particular, strength. Based on CBB composition and fabrication process, validated against technical performance metrics, a techno-economic analysis was constructed which incorporated a process flow model, engineering design (with scaling), and calculated capital plus operating costs. Based on measured property metrics and estimated process economics and a projected price by TEA (techno-economic analysis), building and construction target markets were identified by a market survey assessment. With known cost, price, performance metrics and competitive advantages for CBBs matched with commercial applications/uses, a technical gap analysis was performed to identify further development required for scale-up and commercialization.

01 COAL, LIGNITE, AND PEAT↗

Near-net shaping of high-density, complex, spatially-tailored ceramics for extreme environments

The purpose of this subcontract is for LLNL to collaborate with the Subcontractor (UCSB) in the areas of binder jet additive manufacturing (BJAM), hot pressing (HP), finite element modeling (FEM), and multi-material sintering studies. LLNL wants to further develop its hot pressing, AM, and modeling capabilities through LLNL’s Early Career Faculty Program. This work will focus on developing a method to hot press complex-shaped ceramic parts through the co-deposition of a structural/functional ceramic and sacrificial mold material in one assembly via multi-material binder jet printing. The method aims to produce dense, near-net shaped parts with applications relevant to a wide variety of fields including aerospace, defense, and energy.

36 MATERIALS SCIENCE↗

Light, High Performance and Scalable Coal-Derived Composites for Construction: Precast and Cast-in-Place Applications

The overall objective of this project was to produce a coal-based construction material that has up to ~95 weight percent (wt. %) coal with physical, chemical, and thermal properties exceeding those of ordinary Portland cement (OPC)-based construction materials. Additionally, the project aimed to minimize external binders by implementing novel mixing techniques, while exceeding the performance/cost ratio of OPC. Finally, the project was to demonstrate production of precast products via the design and fabrication of products via a bench scale process. Consistent with some of these objectives, the project successfully fabricated samples of coal-based composite materials with >80 wt% coal with physical, chemical and thermal properties on par with cement-based concrete. Select samples demonstrated compressive strengths with >7,000 psi and flexural strength of >420 psi. The composite materials minimized external binders and also demonstrated durability, as evidenced by resistance to acidic and basic solutions. Finally, larger slab and beam type samples were produced using a process developed by the Recipient, although, the process was not semicontinuous in nature. Taken together, the results of this project suggest that domestic coal has potential to serve as a replacement for cementitious materials utilized in incumbent construction technologies, which could significantly reduce the energy and emissions of the construction industry

01 COAL, LIGNITE, AND PEAT↗