Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “RECYCLING”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 901 records · Page 50

Permanganate Oxidation of Defense Waste Processing Facility (DWPF) Recycle Collection Tank (RCT) Simulants Larger Scale Protocol Runs - Chemical Process Cell (CPC) Nominal and Foamover Conditions

Testing to develop a process to oxidize glycolate and other organic species in non-radioactive waste simulants was requested by Savannah River Remediation (SRR). A Task Technical and Quality Assurance Plan (TTQAP) was written to describe the testing requested by SRR in the development of a process to oxidize glycolate and other organic species that are responsible for hydrogen generation from thermolysis. Scoping studies have been completed as requested by a Technical Assistance Request (TAR) to evaluate the feasibility of using sodium permanganate and Fenton's Reagent (iron catalyzed hydrogen peroxide) for destroying glycolate. The results from these scoping studies were summarized in a report. Six phases of tests with simulants have been planned in developing an oxidation flowsheet for the Recycle Collection Tank (RCT), as shown in Table 1. The first three phases have been completed. The first phase comprised of scoping tests of permanganate and Fenton's reagent. The second phase was a matrix of 23 tests completed to inform a down-select decision by SRR and to complete testing needed to understand the influence of various factors in defining the optimum processing conditions for oxidation of organics. From the results of this testing, oxidation by permanganate was chosen over Fenton's reagent with hydrogen peroxide. The third phase of testing was to demonstrate nominal operation of the permanganate oxidation process under protocols similar to those used in the Defense Waste Processing Facility (DWPF).

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Elimination of Class-9 Hazards in Lithium-ion Recycling (Final Report)

The objective of this project was based upon the FOA request to demonstrate replication of results of the innovation to different locations. The project demonstrated battery deactivation innovations on different battery formats, chemistries, and within various industrial settings. The successful deactivation process was demonstrated on mainstream applications as well as safety-outliers, such as batteries that may have a residual charge. Success of deactivation was shown through repeated observations that various treated batteries do not exhibit thermal runaway with exposure to excessive heating or nail penetration. Deactivation processing was successfully demonstrated on batteries from private industry, public transit authorities, and military formats accessed with support of the Defense Logistics Agency (DLA). Third party analysis of deactivated batteries is ongoing through use of voucher programs available through OnTo’s Made in America Phase II Battery Recycling Prize, and OnTo’s CalTestBed award; these activities support the future special permit or declassification of deactivation treated material that has a firm foundation in results from this project. The project demonstrated the potential for a service business to perform the activities of electrolyte removal and reactivity elimination from large electric vehicle batteries in a relevant environment such as a battery testing and repackaging, or public-transit electric bus service shop. This successful project provided the first description, demonstration, and basis to teach quality control and assurance of successful battery deactivation.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

Development of a Castable High Strength Secondary Aluminum Alloy from Recycled Wrought Aluminum Scrap

A new process for recycling scrap AA7075 aerospace alloys directly into a high strength castable secondary alloy is demonstrated. The process involves enhancing the castability of the utilized primary wrought aluminum scrap feedstock by scrap alloy chemistry optimization and zirconium additions in order to mitigate the inherent hot tearing tendency of 7075 alloys. By utilizing the new process, the hot tearing index of scrap AA7075 was reduced from 26 to 4. Defect-free castings were obtained in pilot-scale castings trials. The developed secondary 7075 alloy also satisfied preset target mechanical properties with strength levels exceeding 250 MPa and elongation levels higher than 3%. The validity of the new approach and its readiness for transition to commercial practice was demonstrated by casting cylinder heads directly from the modified 7075 scrap.

36 MATERIALS SCIENCE↗

Phosphorus Recycling from Ribonucleotide Structures by Iron Oxide Minerals

In this research, we combined experimental and molecular modeling to obtain a fundamental understanding required to evaluate and predict the role of three natural iron oxides minerals (ferrihydrite, goethite, and hematite) in recycling phosphorus from organic matter, particularly ribonucleotides.

58 GEOSCIENCES↗

Fully Recyclable CFRP Particles (CRADA 519)

The proposed resin-enhanced materials, which utilize fully recycled CFRP (carbon-fiber-reinforced polymer) particles, are enabled by PARC's proprietary Chemically Linked Particles Networks (13 granted patents and patent applications). PNNL and PARC have collaborated to develop manufacturing methods, such as vacuum-assisted wet compression molding and filament winding, for fabricating fiber-reinforced composites with the PARC matrix. PNNL has conducted various mechanical, physical, and thermal characterizations to compare their differences between the composites with baseline and PARC matrices. Those characterizations include density, void volume fraction, optical micrography, uniaxial tension, four-point bending/flexure, interlaminar shear, coefficient of thermal expansion, glass transition temperature, and curing kinetics.

36 MATERIALS SCIENCE↗

A Neutronic Analysis of TRU Recycling in PWRs Loaded with MOX-UE Fuel (MOX with U-235 Enriched U Support)

This report presents the results of a study dealing with the homogeneous recycling of either Pu or Pu+Np or Pu+Np+Am or Pu+Np+Am+Cm in PWRs using MOX-UE fuel, i.e. standard MOX fuel with a U235 enriched uranium support instead of the standard tail uranium (0.25%) for standard MOX fuel. This approach allows to multirecycle Pu or TRU (Pu+MA) as long as U235 is available, by keeping the Pu or TRU content in the fuel constant and at a value ensuring a negative moderator void coefficient (i.e. the loss of the coolant brings imperatively the reactor to a subcritical state). Once this value is determined, the U235 enrichment of the MOX-UE fuel is adjusted in order to reach the target burnup (51 GWd/t in this study).

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

BWR Assembly Optimization for Minor Actinide Recycling

The Primary objective of the proposed project is to apply and extend the latest advancements in LWR fuel management optimization to the design of advanced boiling water reactor (BWR) fuel assemblies specifically for the recycling of minor actinides (MAs).

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Th/U-233 multi-recycle in PWRs.

The use of thorium in current or advanced light water reactors (LWRs) has been of interest in recent years. These interests have been associated with the need to increase nuclear fuel resources and the perceived non-proliferation advantages of the utilization of thorium in the fuel cycle. Various options have been considered for the use of thorium in the LWR fuel cycle including: (1) its use in a once-through fuel cycle to replace non-fissile uranium or to extend fuel burnup due to its attractive fertile material conversion, (2) its use for fissile plutonium burning in limited recycle cores, and (3) its advantage in limiting the transuranic elements to be disposed off in a repository (if only Th/U-233 fuel is used). The possibility for thorium utilization in multirecycle system has also been considered by various researchers, primarily because of the potential for near breeders with Th/U-233 in the thermal energy range. The objective of this project is to evaluate the potential of the Th/U-233 fuel multirecycle in current LWRs, with focus this year on pressurized water reactors (PWRs). In this work, approaches for ensuring a sustainable multirecycle without the need for external source of makeup fissile material have been investigated. The intent is to achieve a design that allows existing PWRs to be used with minimal modifications. In all cases including homogeneous and heterogeneous assembly designs, the assembly pitch is kept consistent with that of the current PWRs (21.5 cm used). Because of design difficulties associated with using the same geometry and dimensions as a PWR core, the potential modifications (other than assembly pitch) that would be needed for PWRs to ensure a sustainable multirecycle system have been investigated and characterized. Additionally, the implications of the use of thorium on the LWR fuel cycle are discussed. In Section 2, background information on studies evaluating the use of thorium in the fuel cycle is provided, but focusing on Th/U-233 multirecycle. Recent studies done internationally and in the U.S. are briefly summarized. Additionally, the previous U.S. thorium breeder experiment in the Shippingport reactor is briefly discussed. The objective of this work and the reactor design issues associated with multirecycle of Th/U-233 are discussed in Section 3. The approaches required to achieve a sustainable system are discussed and evaluated. Homogeneous assembly modeling results are presented in this section. In Section 4, a 17-by-17 heterogeneous assembly design has been selected and evaluated, based on its positive attributes for sustainable Th/U-233 multirecycle. A feasibility study is briefly discussed at the end of this section followed by recommendations for future activities. Section 5 discusses the attributes of the 17-by-17 heterogeneous assembly design. The material mass flow data and fuel cycle impact data are reported in this section. Discussions on the fuel cycle implications of thorium fuel utilization are provided in Section 6. This includes information on fuel sources, fuel manufacturing, fuel reprocessing, and re-fabrication. The conclusions of the study are provided in Section 7.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Recycled PET Nanofibers for Water Filtration Applications

Water shortage is an immediate and serious threat to our world population. Inexpensive and scalable methods to clean freshwater and wastewater are in high demand. Nanofiber filtration membranes represent a next generation nonwoven filter media due to their unique properties. Polyethlyene terephthalate (PET) is often used in the packaging of water and other commonly used materials, leading to a large amount of plastic waste often with limited incentive for recycling (few value-added uses). Here, we present work in the generation of nanofiber liquid filtration membranes from PET plastic bottles and demonstrate their use in microfiltration. PET nanofiber membranes were formed via solution electrospinning with fiber diameters as low as ca. 100 nm. Filtration efficiency was tested with latex beads with sizes ranging from 30 to 2000 nm. Greater than 99% of the beads as small as 500 nm were removed using gravity filtration. To reduce biofouling, the mats were functionalized with quaternary ammonium and biguanide biocides. The biguanide functionalized mats achieved 6 log reduction for both gram negative and gram positive bacteria.

36 MATERIALS SCIENCE↗

SELF-SUSTAINED RECYCLING IN THE INNER DUST RING OF PRE-TRANSITIONAL DISKS

Observations of pre-transitional disks show a narrow inner dust ring and a larger outer one. They are separated by a cavity with no or only little dust. We propose an efficient recycling mechanism for the inner dust ring which keeps it in a steady state. No major particle sources are needed for replenishment. Dust particles and pebbles drift outwards by radiation pressure and photophoresis. The pebbles grow during outward drift until they reach a balanced position where residual gravity compensates photophoresis. While still growing larger they reverse their motion and drift inward. Eventually, their speed is fast enough for them to be destroyed in collisions with other pebbles and drift outward again. We quantify the force balance and drift velocities for the disks LkCa15 and HD 135344B. We simulate single-particle evolution and show that this scenario is viable. Growth and drift timescales are on the same order and a steady state can be established in the inner dust ring.

79 ASTRONOMY AND ASTROPHYSICS↗

M2 Selective Laser Melting GRCop-42 Recycling Study

A powder recycling study was conducted to examine the effects of powder reuse on physical and mechanical properties of SLM GRCop-42. Twelve sequential builds were conducted, each reusing powder from the previous build topped off with virgin powder to fill the powder chamber. Powder morphology, particle size distribution, flowability, and chemistry were examined for each subsequent build, along with the mechanical properties of tensile and LCF specimens built with each powder batch. It was found that only powder flowability demonstrated a trend with increasing reuse, with flowability and cohesiveness generally decreasing over the course of the 12 builds. Minor variation in powder chemistry was observed throughout the study, however, the variations did not correlate with increasing powder reuse

Additive Manufacturing↗

E-RECOV, Electrochemical Recycling Electronic Constituents of Value

Methods for handling electronic waste have failed to keep pace with the world’s growing use of electronics. Recycling is not only an opportunity to reclaim valuable metals for new products, it’s also a responsible way to keep outdated electronics from ending up in unwanted places. The U.S. Department of Energy’s Critical Materials Institute has helped researchers at Idaho National Laboratory develop an economically and sound solution to discarding electronics.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Take a Ride Along NIF’s Optics Recycle Loop

The National Ignition Facility uses over 40,000 optics to help guide 192 laser beams onto a target the size of a pencil eraser. Check out how the optics recycle loop repairs optics, saving time and money.

47 OTHER INSTRUMENTATION↗

Innovative and Recyclable Thermoplastic Wind Turbine Blades

Currently, nearly all utility-scale wind turbine blades are manufactured using traditional thermoset resin systems such as epoxy, polyester, or vinyl ester. Decommissioned thermoset blades cannot easily or economically be recycled at the end of life, with the vast majority of them ending up in landfills. Researchers at the National Renewable Energy Laboratory (NREL) are working to change that.

17 WIND ENERGY↗