Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “P STATES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 901 records · Page 50

Optical characterization of deep-level defects in n-type Al x In y Ga 1- x - y P for the development of solid-state photomultiplier analogs

Characterizing intrinsic defects is an essential step in evaluating materials for novel optoelectronic device applications. For photomultipliers, suppressing dark currents is critical, but a tradeoff is present between maximizing the band gap while remaining sensitive to the wavelength of interest and minimizing the incorporation of fresh defects by growing not-yet-optimized alloys. We present a series of capacitance-based measurements, including deep-level optical spectroscopy, steady-state photocapacitance, and illuminated capacitance-voltage, on photodiodes with lightly n-type Al x In y Ga 1−x−y P absorber regions. Several deep levels are identified, including one near the midgap. Although the inclusion of aluminum increases each trap density by approximately 10×, the hole capture cross-section also appears to decrease, suggesting that Shockley–Read–Hall dark currents may be suppressed. These materials may be good candidates for the development into silicon photomultiplier analogs with a wider bandgap for scintillator applications.

III–V↗

Symmetry-dependent electron-electron interaction in coherent tunnel junctions resolved by measurements of zero-bias anomaly

We provide experimental evidence that zero bias anomaly in the differential resistance of magnetic tunnel junctions (MTJs) is due to electron-electron interaction (EEI). Magnon effect is excluded by measuring at low temperatures down to 0.2 K and with reduced AC measurement voltages down to 0.06 mV. The normalized change of conductance is proportional to ln (eV /k B T ), consistent with the Altshuler-Aronov theory of tunneling with EEI but inconsistent with magnetic impurity scattering. The slope of the ln (eV /k B T ) dependence is symmetry dependent, i.e., MTJs with symmetry filtering show di erent slopes for P and AP states, while those without symmetry filtering (amorphous barriers) have nearly the same slopes for P and AP.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Spin Flavor Composition of Excited Baryons

The excited baryon masses are analyzed in the framework of the 1/Nc expansion using the available physical masses and also the masses obtained in lattice QCD for different quark masses. The baryon states are organized into irreducible representations of SU(6)×O(3), where the [56,?P=0+] ground state and excited baryons, and the [56,2+] and [70,1?] excited states are analyzed. The analyses are carried out to O1/Nc and first order in the quark masses. The issue of state identifications is discussed. Numerous parameter independent mass relations result at those orders, among them the well known Gell-Mann-Okubo and Equal Spacing relations, as well as additional relations involving baryons with different spins. It is observed that such relations are satisfied at the expected level of precision. Predictions for physically unknown states for each multiplet are obtained. From the quark-mass dependence of the coefficients in the baryon mass formulas an increasingly simpler picture of the spin-flavor composition of the baryons is observed with increasing pion mass (equivalently, increasing mu,d masses), as measured by the number of significant mass operators.

Goity, Jose↗

High average current HVDC electron gun for EIC hadron cooling

A critical R&D initiative for the Electron Ion Collider (EIC) involves the design of an electron gun capable of gen erating a high average current and high-brightness electron beam for the hadron cooler. This is essential to preserve hadron beam quality and achieve the collider’s luminosity target of 1 × 10 34 s −1 cm −2 . For an energy recovery linac (ERL)-based hadron cooler, the gun must deliver a high average current of 98.5 mA, a normalized transverse emittance of less than 2 mm−mrad, and a bunch charge of up to 2.5 nC. This proceeding outlines the high-voltage design of a DC gun operating at 500 kV, with conditioning capability up to 600 kV. The design incorporates several unique fea tures, including the use of inverted ceramic at this voltage level, active cooling for the cathode, and large single-crystal multi-alkali cathodes grown on a silicon carbide substrate. High-brightness electron sources are also pivotal for other ad vanced applications, such as high-intensity gamma sources, future 𝑒 + 𝑒 − colliders, and ultra-deep UV sources for the semiconductor industry. Additionally, this paper provides an overview of the hadron cooling approaches planned or proposed for the EIC.

43 PARTICLE ACCELERATORS↗

Hyperon III: $$K^{-}p - \pi \varSigma $$ coupled-channel dynamics in the $$\varLambda (1405)$$ mass region

Abstract Low-energy data on the three charge states in $$\gamma p \rightarrow K^+(\varSigma \pi )$$ γ p → K + ( Σ π ) from CLAS at JLab, on $$K^-p\rightarrow \pi ^0\pi ^0\varLambda $$ K - p → π 0 π 0 Λ and $$\pi ^0\pi ^0\varSigma $$ π 0 π 0 Σ from the Crystal Ball at BNL, bubble chamber data on $$K^-p\rightarrow \pi ^-\pi ^+\pi ^{\pm }\varSigma ^{\mp }$$ K - p → π - π + π ± Σ ∓ , low-energy total cross sections on $$K^-$$ K - induced reactions, and data on the $$K^-p$$ K - p atom are fitted with the BnGa partial-wave-analysis program. We find that the data can be fitted well with just one isoscalar spin-1/2 negative-parity pole, the $$\varLambda (1405)$$ Λ ( 1405 ) , and background contributions. In a fit with one isocsalar state, the $$\varLambda (1405)$$ Λ ( 1405 ) structure can be determined as a dominantly SU(3) singlet state. A fit with two isoscalar singlet states, with imposed properties of the low-mass state, is, however, also not incompatible with data.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Particle-gamma spectroscopy of the (p,d-gamma){sup 155}Gd reaction: Neutron single-quasiparticle states at N=91

A segmented Si telescope and HPGe array is used to study the {sup 156}Gd(p,d-gamma){sup 155}Gd direct reaction by d-gamma and d-gamma-gamma coincidence measurements using 25-MeV protons. The present investigation is the first time that this N=91 nucleus and the N=90 region--which is known for a rapid change from vibrational to rotational character, several low-lying 0{sup +} states in the even-even nuclei, and large Coriolis (DELTAOMEGA=1) plus DELTAN=2 mixing in the even-odd nuclei--have been studied by particle-gamma coincidence following a direct reaction with light ions. Gamma-ray energies and branches, excitation energies, angular distributions, and cross sections are measured for states directly populated in the (p,d) reaction. A new low-energy doublet state at 592.46 keV (previously associated with the K=0 x (3/2){sup -}[521] bandhead) and several new gamma-ray transitions (particularly for states with excitation energies >1 MeV) are presented. Most notably, the previous nu (7/2){sup +}[404] systematics at and around the N=90 transition region are brought into question and reassigned as nu (5/2){sup +}[402]. This reassignment makes the nu (1/2){sup +}[400], nu (3/2){sup +}[402], and nu (5/2){sup +}[402] orbitals, which originate from the 3s{sub 1/2}, 2d{sub 3/2}, and 2d{sub 5/2} spherical states, respectively, responsible for the three largest cross sections to positive-parity states in the (p,d){sup 155}Gd direct reaction. These three steeply upsloping orbitals undergo DELTAN=2 mixing with their N=6 orbital partners, which are oppositely sloped with respect to deformation. The presence of these steeply sloped and crossing orbitals near the Fermi surface could weaken the monopole pairing strength and increase the quadrupole pairing strength of neighboring even-even nuclei, which would bring nu 2p-2h 0{sup +} states below 2DELTA. Indeed, this could account for a large number of the low-lying 0{sup +} states populated in the (p,t){sup 154}Gd direct reaction.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

NbTa_BCC_SolidSolution_128atoms_VASP6

We performed density functional theory (DFT) calculations for body-centered-cubic (BCC) structures with 128 lattices sites of solid solution binary alloys niobium-tantalum (Nb-Ta). The electronic structures of alloys have been calculated using Vienna Ab initio Simulation Package (VASP). Within this package the DFT approach is used to reduce many-body Schrodinger equation to set of single particle Kohn-Sham (KS) equations. The generalized electronic exchange-correlation functional is described by generalized gradient approximation with the Perdew-Burke-Ernzerhof parametrization. The electron-ion interactions is described by pseudopotentials developed within the plane-wave basis projector augmented-wave (PAW) approach \cite{PAW}. These pseudopotentials are available at the VASP portal (http://cms.mpi.univie.ac.at/vasp/). Our calculations have been run with the pseudopotentials treating s and p semi-core states as valence in case for the elements Nb. For Ta, p semi-core states as valence were chosen. The electronic densities and potentials are expanded over plane-waves with energy cutoff of 350 eV. 2x2x2 k-mesh and normal precision were used. The alloys were modeled by supercell containing 128 randomly distributed atoms. At initial step the atoms occupy perfect bcc lattice cites. This initial structure was optimized until energy changes less than 1e-6 eV, while forces acting on atoms don't exceed 1e-2 eV/angstrom. The electron-ion interaction is described by PAW pseudopotentials. The calculations have been collected by sampling chemical compositions across the entire compositional range. The chemical compositions have been sampled by progressively changing the number of atoms per constituent by 4. For each chemical composition of binaries and ternaries, the first-principle calculations have been run for 100 randomized arrangements of the constituents on the BCC lattice sites. We collected data for a total of 3,100 randomized atomic structures over 31 chemical compositions. The calculations have been collected on NERSC-Perlmutter using the VASP 6.3.2. The VASP calculations for every atomic structure have been performed in 2 main steps: 1. Starting from an ideal body-centered-cubic (BCC) structure, geometry optimization with low precision has been executed to perform a preliminary optimization of the atomic structure. The output for this calculations is available in the files 0.CONTCAR, 0.OUTCAR, rlx1.out. 2. Using the atomic structure resulting from the preliminary geometry optimization, a second geometry optimization has been performed using normal precision. The output for this calculations is available in the files CONTCAR, OUTCAR, rlx2.out, vaspout.h5, and vasprun.xml. Cases 1-10 have been run without generating the file 'vaspout.h5'. Every chemical composition sampled across the composition range in the dataset has its own directory. The convention used to name the directories for ternary alloys is AXBYCZ, where A, B, and C refer to the constituents, and X, Y, and Z are positive integers that represent the number of atoms for each constituent and their values still sum up to 128. Each atomic structure associated with a specific chemical composition has its own sub-directory within the directory of the corresponding chemical composition. The sub-directories for each atomic structure for each chemical composition are named 'case-*', where * is a positive integer that spans all the values from 1 through 100, extremes included. The files contained in each sub-directory 'case-*' for each atomic structure are as follows: FILES contained in each subdirectory with name case-N where N ranges between 11 and 100, extremes included: 1. INCAR: input file that contains various parameters and settings for controlling the behavior of the electronic structure calculations 2. KPOINTS: input file that specifies the Bloch vectors (k points) used to sample the Brillouin zone 3. 0.POSCAR: input file that defines the atomic structure of a system 4. 0.CONTCAR: output file that provides the atomic positions and cell parameters after the first geometry optimization has been run with the precision variable set to PREC=Low in the INCAR file 5. 0.OUTCAR: output file that contains detailed information about the progress of a calculation after the first geometry optimization has been run with the precision variable set to PREC=Low in the INCAR file 6. rlx1.out: file with diagnostic information about the execution of the first geometry optimization with precision variable set to PREC=Low in the INCAR file 7. POSCAR: input file that defines the atomic structure of a system after the first geometry optimization has been run at low precision. This represents the input for the second geometry optimization run with the precision variable set to PREC=Normal in the INCAR file 8. CONTCAR: output file that provides the atomic positions and cell parameters after the second geometry optimization has been run with the precision variable set to PREC=Normal in the INCAR file 9. OUTCAR: output file that contains detailed information about the progress of a calculation after the second geometry optimization has been run with the precision variable set to PREC=Normal in the INCAR file 10. rlx2.out: file with diagnostic information about the execution of the second geometry optimization with precision variable set to PREC=Normal in the INCAR file 11. vaspout.h5: hierarchical HDF5 file containing the inputs and outputs of a VASP calculation. To analyze the data in this file we recommend using py4vasp. This file is only produced if the VASP version used is compiled with HDF5 support 12. vasprun.xml: contains similar information to OUTCAR, but in an xml format. Subdirectories with name case-N, where N ranges between 1 and 10 (extremes included) contain all the files listed above except 'vaspout.h5'. Subdirectories with name case-N, where N ranges between 41 and 60 (extremes included), contain a duplicate copy of the files listed above except for KPOINTS. The names of the duplicate files end with -bis, and correspond to a second VASP calculation that has converged to a different optimized geometry. This research is sponsored by the Artificial Intelligence Initiative as part of the Laboratory Directed Research and Development (LDRD) Program of Oak Ridge National Laboratory, managed by UT-Battelle, LLC, for the US Department of Energy under contract DE-AC05-00OR22725. This work used resources of the Oak Ridge Leadership Computing Facility, which is supported by the Office of Science of the U.S. Department of Energy under Contract No. DE-AC05-00OR22725, under Directorate Discretionary awards MAT025 (Materials Science) and LRN026 (Machine Learning), and INCITE award MAT201. This work also used resources of the National Energy Research Scientific Computing Center, which is supported by the Office of Science of the U.S. Department of Energy under Contract No. DE-AC02-05CH11231, under award ERCAP0025216. REFERENCES (1) Kresse, G. and Hafner, J. Ab initio molecular dynamics for liquid metals. Phys. review B 47, 558 (1993). (2) Kresse, G. and Hafner, J. Ab initio molecular-dynamics simulation of the liquid-metal-amorphous-semiconductor transition in germanium. Phys. Rev. B 49, 14251 (1994) (3) Kresse, G. and Furthmüller, J. Efficiency of ab-initio total energy calculations for metals and semiconductors using a plane-wave basis set. Comput. materials science 6, 15-50 (1996) (4) Kresse, G. and Furthmüller, J. Efficient iterative schemes for ab initio total-energy calculations using a plane-wave basis set. Phys. review B 54, 11169 (1996) (5) Kresse, G. and Joubert, D. From ultrasoft pseudopotentials to the projector augmented-wave method. Phys. review b 59, 1758 (1999)

36 MATERIALS SCIENCE↗

TaV_BCC_SolidSolution_128atoms_VASP6

We performed density functional theory (DFT) calculations for body-centered-cubic (BCC) structures with 128 lattices sites of solid solution binary alloys tantalum-vanadium (Tanu-V). The electronic structures of alloys have been calculated using Vienna Ab initio Simulation Package (VASP). Within this package the DFT approach is used to reduce many-body Schrodinger equation to set of single particle Kohn-Sham (KS) equations. The generalized electronic exchange-correlation functional is described by generalized gradient approximation with the Perdew-Burke-Ernzerhof parametrization. The electron-ion interactions is described by pseudopotentials developed within the plane-wave basis projector augmented-wave (PAW) approach. These pseudopotentials are available at the VASP portal (http://cms.mpi.univie.ac.at/vasp/). Our calculations have been run with the pseudopotentials treating s and p semi-core states as valence in case for the element V. For Ta, p semi-core states as valence were chosen. The electronic densities and potentials are expanded over plane-waves with energy cutoff of 350 eV. 2x2x2 k-mesh and normal precision were used. The alloys were modeled by supercell containing 128 randomly distributed atoms. At initial step the atoms occupy perfect bcc lattice cites. This initial structure was optimized until energy changes less than 1e-6 eV, while forces acting on atoms don't exceed 1e-2 eV/angstrom. The electron-ion interaction is described by PAW pseudopotentials. The calculations have been collected by sampling chemical compositions across the entire compositional range. The chemical compositions have been sampled by progressively changing the number of atoms per constituent by 4. For each chemical composition of binaries and ternaries, the first-principle calculations have been run for 100 randomized arrangements of the constituents on the BCC lattice sites. We collected data for a total of 3,100 randomized atomic structures over 31 chemical compositions. The calculations have been collected on NERSC-Perlmutter and OLCF-Summit using the VASP 6.3.2. The VASP calculations for every atomic structure have been performed in 2 main steps: 1. Starting from an ideal body-centered-cubic (BCC) structure, geometry optimization with low precision has been executed to perform a preliminary optimization of the atomic structure. The output for this calculations is available in the files 0.CONTCAR, 0.OUTCAR, rlx1.out. 2. Using the atomic structure resulting from the preliminary geometry optimization, a second geometry optimization has been performed using normal precision. The output for this calculations is available in the files CONTCAR, OUTCAR, rlx2.out, vaspout.h5, and vasprun.xml. Cases 1-10 have been run without generating the file 'vaspout.h5'. Every chemical composition sampled across the composition range in the dataset has its own directory. The convention used to name the directories for binary alloys is AXBY, where A and B refer to the constituents, whereas X and Y are positive integers that represent the number of atoms for each constituent and their values still sum up to 128. Each atomic structure associated with a specific chemical composition has its own sub-directory within the directory of the corresponding chemical composition. The sub-directories for each atomic structure for each chemical composition are named 'case-*', where * is a positive integer that spans all the values from 1 through 100, extremes included. The files contained in each sub-directory 'case-*' for each atomic structure are as follows: FILES contained in each subdirectory with name case-N where N ranges between 11 and 100, extremes included: 1. INCAR: input file that contains various parameters and settings for controlling the behavior of the electronic structure calculations 2. KPOINTS: input file that specifies the Bloch vectors (k points) used to sample the Brillouin zone 3. 0.POSCAR: input file that defines the atomic structure of a system 4. 0.CONTCAR: output file that provides the atomic positions and cell parameters after the first geometry optimization has been run with the precision variable set to PREC=Low in the INCAR file 5. 0.OUTCAR: output file that contains detailed information about the progress of a calculation after the first geometry optimization has been run with the precision variable set to PREC=Low in the INCAR file 6. rlx1.out: file with diagnostic information about the execution of the first geometry optimization with precision variable set to PREC=Low in the INCAR file 7. POSCAR: input file that defines the atomic structure of a system after the first geometry optimization has been run at low precision. This represents the input for the second geometry optimization run with the precision variable set to PREC=Normal in the INCAR file 8. CONTCAR: output file that provides the atomic positions and cell parameters after the second geometry optimization has been run with the precision variable set to PREC=Normal in the INCAR file 9. OUTCAR: output file that contains detailed information about the progress of a calculation after the second geometry optimization has been run with the precision variable set to PREC=Normal in the INCAR file 10. rlx2.out: file with diagnostic information about the execution of the second geometry optimization with precision variable set to PREC=Normal in the INCAR file 11. vaspout.h5: hierarchical HDF5 file containing the inputs and outputs of a VASP calculation. To analyze the data in this file we recommend using py4vasp. This file is only produced if the VASP version used is compiled with HDF5 support 12. vasprun.xml: contains similar information to OUTCAR, but in an xml format. Subdirectories with name case-N, where N ranges between 1 and 10 (extremes included) contain all the files listed above except 'vaspout.h5'. Subdirectories with name case-N, where N ranges between 41 and 60 (extremes included), contain a duplicate copy of the files listed above except for KPOINTS. The names of the duplicate files end with -bis, and correspond to a second VASP calculation that has converged to a different optimized geometry. This research is sponsored by the Artificial Intelligence Initiative as part of the Laboratory Directed Research and Development (LDRD) Program of Oak Ridge National Laboratory, managed by UT-Battelle, LLC, for the US Department of Energy under contract DE-AC05-00OR22725. This work used resources of the Oak Ridge Leadership Computing Facility, which is supported by the Office of Science of the U.S. Department of Energy under Contract No. DE-AC05-00OR22725, under Directorate Discretionary awards MAT025 (Materials Science) and LRN026 (Machine Learning), and INCITE award MAT201. This work also used resources of the National Energy Research Scientific Computing Center, which is supported by the Office of Science of the U.S. Department of Energy under Contract No. DE-AC02-05CH11231, under award ERCAP0025216. REFERENCES (1) Kresse, G. and Hafner, J. Ab initio molecular dynamics for liquid metals. Phys. review B 47, 558 (1993). (2) Kresse, G. and Hafner, J. Ab initio molecular-dynamics simulation of the liquid-metal-amorphous-semiconductor transition in germanium. Phys. Rev. B 49, 14251 (1994) (3) Kresse, G. and Furthmuller, J. Efficiency of ab-initio total energy calculations for metals and semiconductors using a plane-wave basis set. Comput. materials science 6, 15-50 (1996) (4) Kresse, G. and Furthmuller, J. Efficient iterative schemes for ab initio total-energy calculations using a plane-wave basis set. Phys. review B 54, 11169 (1996) (5) Kresse, G. and Joubert, D. From ultrasoft pseudopotentials to the projector augmented-wave method. Phys. review b 59, 1758 (1999)

36 MATERIALS SCIENCE↗

Spectroscopic Investigation of Light-Induced Degradation Paramagnetic Defect in Czochralski Silicon

We report on the electron paramagnetic resonance (EPR) spectra of Cz and FZ Si in different stages of light-induced degradation. Firstly, we show that the paramagnetic signal at low temperature (10K) is dependent on the state of light-induced degradation performed at room temperature and on the sample doping. The light-degraded state in p-Cz Si shows strong, sharp paramagnetic defect signatures compared to samples in the annealed state. When an excitation light is applied during the EPR measurement, additional structures appear in the spectra. In contrast, the wide EPR active signature related to boron interaction with lattice, is present in the annealed state but diminishes after light exposure. Finally, we show that the degraded paramagnetic signal returns when annealed samples are exposed to ambient light. We suggest that these changes in the electron paramagnetic resonance spectra is related to the boron-oxygen defect that causes light-induced degradation.

41 EE - Solar Energy Technologies Office (EE-4S)↗

Interplay between p – and d – orbitals yields multiple Dirac states in one- and two-dimensional CrB 4

Theoretical evidence of the existence of six inequivalent and six threefold degenerate pairs of Dirac cones in the low-spectrum diagram of monolayered hexagonal CrB 4 is provided. The four d electrons of the Cr atom are yielded to the B sublattices creating an isoelectronic structure to graphene where the interplay between p and d orbitals leads to the appearance of additional Dirac states on both one- and two-dimensional geometries. Ab initio calculations show that, although spin–orbit interaction splits the cone-shaped valence and conduction bands, CrB 4 is a semimetal with compensated electron–hole pockets. As the 2D layer is shaped into finite-width ribbons, one actual and one symmetry-frustrated Dirac point are observed at the Fermi level, yielding massless fermions in a 1D nano-structure with no topological insulating features. In conclusion, a rational explanation in terms of periodic boundary conditions across the ribbon axis is given to unveil the origin of the Dirac point.

36 MATERIALS SCIENCE↗

Thermal Equation of State of Copper Studied by High P-T Synchrotron X-ray Diffraction

The unit-cell volume of copper (Cu) has been measured by synchrotron x-ray at pressures and temperatures of up to 8.1 GPa and 1100 K. From pressure-volume-temperature (P-V-T) measurements, thermoelastic parameters of Cu were derived based on a modified high-T Birch-Murnaghan equation of state and a thermal pressure approach. The ambient bulk modulus derived from this work is comparable to previously reported value, whereas all other thermoelastic parameters of Cu have never been determined before. These results extend our knowledge of the fundamental thermophysical properties on Cu.

36 MATERIALS SCIENCE↗

Universal Effective Charges in the 𝑠⁢𝑑 and 𝑓⁡𝑝 Shells

The 247-keV state in 54 Sc, populated in the 𝛽 decay of 54 Ca, is reported here as a nanosecond isomer with a half-life of 26.0(22) ns. The state is interpreted as the 1 + member of the 𝜋⁢𝑓 7/2 ⊗ 𝜈⁢𝑓 5/2 spin-coupled multiplet, which decays to the 3 + ,𝜋⁢𝑓 7/2 ⊗ 𝜈⁢𝑝 1/2 ground state. The new half-life corresponds to a pure 𝐸⁢2 transition with a strength of 1.93(16) W.u., providing the most precise, unambiguous 𝐵⁡(𝐸⁢2) value in the neutron-rich 𝑓⁡𝑝 region to date for a nucleus with valence protons above 𝑍 = 20. Notably, it is roughly 4 times larger than the 𝐵⁡(𝐸⁢2;1/2 − → 5/2 − ) value in 55 Ca. The results, as compared to semiempirical and ab initio shell-model calculations, indicate (1) a weak 𝑁 = 34 subshell gap relative to 𝑁 = 32, (2) a large 𝐸⁢2 enhancement in Sc as compared to Ca due to 1⁢𝑝 − 1⁢ℎ proton excitations across 𝑍 = 28, and (3) empirical effective proton and neutron charges 𝑒 𝜋 = 1.30⁢(8)⁢𝑒 and 𝑒 𝜈 = 0.452⁢(7)⁢𝑒, respectively, that are in contrast to reports of 𝑒 𝜋 ≈1.1–1.15⁢𝑒 and 𝑒 𝜈 ≈ 0.6–0.8⁢𝑒 for 𝑓⁡𝑝-shell nuclei near 𝑁 = 𝑍. Here, we demonstrate that these reports are erroneous and that, in fact, a universal set of effective charges can be used across the 𝑠⁢𝑑 and 𝑓⁡𝑝 shells.

Beta decay↗

Measurement of Angular Coefficients of Drell-Yan $e^+e^-$ pairs in $p \bar{p}$ Collisions at $\sqrt{s}$ = 1.96 TeV

In this thesis we present the status of the measurement of angular distributions of final state electrons in $p \bar{p} \to \gamma^* Z \to e^+ e^- + X$ events produced in the Z boson mass region at $\sqrt{s}$ = 1.96 TeV at the Tevatron. For this analysis, we are using the full Run II dataset corresponding to 9.7$\,fb^{-1}$ of integrated luminosity collected with the D0 detector. The angular distributions as a function of the transverse momentum of the electron-positron pair are studied, and the Lam-Tung relation, valid only for a spin-1 description of the gluon is investigated. The final result will also describe the details of the production mechanism of Z bosons via quark anti-quark annihilation or quark-gluon Compton scattering.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Baryon spin-flavor structure from an analysis of lattice QCD results of the baryon spectrum

The excited baryon masses are analyzed in the framework of the 1/Nc expansion using the available physical masses and also the masses obtained in lattice QCD for different quark masses. The baryon states are organized into irreducible representations of SU(6) x O(3), where the [56,l P =0⁺] ground state and excited baryons, and the [56,2 + ] and [70}},1 - ] excited states are analyzed. The analyses are carried out to order O(1/N c ) and first order in the quark masses. The issue of state identifications is discussed. Numerous parameter independent mass relations result at those orders, among them the well known Gell-Mann-Okubo and Equal Spacing relations, as well as additional relations involving baryons with different spins. It is observed that such relations are satisfied at the expected level of precision. The main conclusion of the analysis is that qualitatively the dominant physical effects are similar for the physical and the lattice QCD baryons.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

New results in the CTEQ-TEA global analysis of parton distributions in the nucleon

This report summarizes the latest developments in the CTEQ-TEA global analysis of parton distribution functions (PDFs) in the nucleon. The focus is on recent NNLO fits to high-precision LHC data at 8 and 13 TeV, including Drell–Yan, jet, and top-quark pair production, pursued on the way toward the release of the new generation of CTEQ-TEA general-purpose PDFs. The report also discusses advancements in statistical and numerical methods for PDF determination and uncertainty quantification, highlighting the importance of robust and replicable uncertainties for high-stakes observables. Additionally, it covers phenomenological studies related to PDF determination, such as the interplay of experimental constraints, exploration of correlations between high-x nucleon sea and low-energy parity-violating measurements, fitted charm in the nucleon, the photon PDF in the neutron, and simultaneous SMEFT-PDF analyses.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

The upgraded summing NaI(Tl) (SuN++) absorption spectrometer

Simulations of astrophysical processes require a plethora of nuclear physics input. In particular, models of neutron-capture nucleosynthesis like the s, i, and r processes require β-decay information and experimentally constrained neutron-capture reaction rates. Past experiments with the 4π Summing NaI(Tl) (SuN) total absorption spectrometer have provided these physics quantities. Here, we outline an upgrade of SuN to SuN++, where 20 new segments (12 NaI(Tl) and 8 CeBr 3 ) have been integrated into the pre-existing SuN total absorption spectrometer to provide increased energy and time resolution in β-decay experiments. The details of the newly upgraded SuN++ total absorption spectrometer are discussed with results from the commissioning experiment at the Facility for Rare Isotope Beams (FRIB) utilizing a 70 Cu beam.

CeBr3↗

PETSc/TAO Users Manual Revision 3.23

This manual describes the use of the Portable, Extensible Toolkit for Scientific Computation (PETSc) and the Toolkit for Advanced Optimization (TAO) for the numerical solution of partial differential equations (PDEs) and related problems on high-performance computers. PETSc/TAO is a suite of data structures and routines that provide the building blocks for implementing large-scale application codes on parallel (and serial) computers. PETSc uses the MPI standard for all distributed memory communication.

97 MATHEMATICS AND COMPUTING↗

Explicit inclusion of nonlocality in ( d , p ) transfer reactions

Traditionally, nucleon-nucleus optical potentials are made local for convenience. In recent work we studied the effects of including nonlocal interactions explicitly in the final state for (d,p) reactions, within the distorted wave Born approximation. Our goal in this work is to develop an improved formalism for nonlocal interactions that includes deuteron breakup and to use it to study the effects of including nonlocal interactions in transfer (d,p) reactions, in both the deuteron and the proton channel. We extend the finite-range adiabatic distorted wave approximation to include nonlocal nucleon optical potentials. We apply our method to (d,p) reactions on 16 O, 40 Ca, 48 Ca, 126 Sn, 132 Sn, and 208 Pb at 10, 20 and 50 MeV. Here, we find that nonlocality in the deuteron scattering state reduces the amplitude of the wave function in the nuclear interior, and shifts the wave function outward. In many cases, this has the effect of increasing the transfer cross section at the first peak of the angular distributions. This increase was most significant for heavy targets and for reactions at high energies. Lastly, our systematic study shows that, if only local optical potentials are used in the analysis of experimental (d, p) transfer cross sections, the extracted spectroscopic factors may be incorrect by up to 40% due to the local approximation.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗