SEARCH · Engineering Papers

Results for “usability studies”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5

All sources NASA NTRS DOE OSTI

NASA NTRS2012

Initial Evaluation of a Conflict Detection Tool in the Terminal Area

Despite the recent economic recession and its adverse impact on air travel, the Federal Aviation Administration (FAA) continues to forecast an increase in air traffic demand that may see traffic double or triple by the year 2025. Increases in air traffic will burden the air traffic management system, and higher levels of safety and efficiency will be required. The air traffic controllers primary task is to ensure separation between aircraft in their airspace and keep the skies safe. As air traffic is forecasted to increase in volume and complexity [1], there is an increased likelihood of conflicts between aircraft, which adds risk and inefficiency to air traffic management and increases controller workload. To attenuate these factors, recent ATM research has shown that air and ground-based automation tools could reduce controller workload, especially if the automation is focused on conflict detection and resolution. Conflict Alert is a short time horizon conflict detection tool deployed in the Terminal Radar Approach Control (TRACON), which has limited utility due to the high number of false alerts generated and its use of dead reckoning to predict loss of separation between aircraft. Terminal Tactical Separation Assurance Flight Environment (T-TSAFE) is a short time horizon conflict detection tool that uses both flight intent and dead reckoning to detect conflicts. Results of a fast time simulation experiment indicated that TTSAFE provided a more effective alert lead-time and generated less false alerts than Conflict Alert [2]. TSAFE was previously tested in a Human-In-The-Loop (HITL) simulation study that focused on the en route phase of flight [3]. The current study tested the T-TSAFE tool in an HITL simulation study, focusing on the terminal environment with current day operations. The study identified procedures, roles, responsibilities, information requirements and usability, with the help of TRACON controllers who participated in the experiment. Metrics such as lead alert time, alert response time, workload, situation awareness and other measures were statistically analyzed. These metrics were examined from an overall perspective and comparisons between conditions (altitude resolutions via keyboard entry vs. ADS-B entry) and controller positions (two final approach sectors and two feeder sectors) were also examined. Results of these analyses and controller feedback provided evidence of T-TSAFE s potential promise as a useful air traffic controller tool. Heuristic analysis also provided information on ways in which the T-TSAFE tool can be improved. Details of analyses results will be presented in the full paper.

Verma Savita Arora↗

NASA NTRS1990

Operationally Efficient Propulsion System Study (OEPSS) data book. Volume 2: Ground operations problems

Operations problems and cost drivers were identified for current propulsion systems and design and technology approaches were identified to increase the operational efficiency and to reduce operations costs for future propulsion systems. To provide readily usable data for the ALS program, the results of the OEPSS study were organized into a series of OEPSS Data Books. This volume presents a detailed description of 25 major problems encountered during launch processing of current expendable and reusable launch vehicles. A concise description of each problem and its operational impact on launch processing is presented, along with potential solutions and technology recommendation.

Waldrop, Glen S.↗

NASA NTRS1991

Reusable Reentry Satellite (RRS) system design study. Phase B, appendix E: Attitude control system study

A study which consisted of a series of design analyses for an Attitude Control System (ACS) to be incorporated into the Re-usable Re-entry Satellite (RRS) was performed. The main thrust of the study was associated with defining the control laws and estimating the mass and power requirements of the ACS needed to meet the specified performance goals. The analyses concentrated on the different on-orbit control modes which start immediately after the separation of the RRS from the launch vehicle. The three distinct on-orbit modes considered for these analyses are as follows: (1) Mode 1 - A Gravity Gradient (GG) three-axis stabilized spacecraft with active magnetic control; (2) Mode 2 - A GG stabilized mode with a controlled yaw rotation rate ('rotisserie') using three-axis magnetic control and also incorporating a 10 N-m-s momentum wheel along the (Z) yaw axis; and (3) Mode 3 - A spin stabilized mode of operation with the spin about the pitch (Y) axis, incorporating a 20 N-m-s momentum wheel along the pitch (Y) axis and attitude control via thrusters. To investigate the capabilities of the different controllers in these various operational modes, a series of computer simulations and trade-off analyses have been made to evaluate the achievable performance levels, and the necessary mass and power requirements.

Source record↗

NASA NTRSDate not supplied

Additional Metadata Guidelines to Improve the Structure and Usability of HDF and NetCDF Files

The Hierarchical Data Format (HDF) and Network Common Data Form (NetCDF) are data file formats created to aid users in the creation or use of scientific data. These file formats are useful for handling large data volumes and hosting extensive metadata as global attributes or variables and are popular with the modeling community. HDF and NetCDF files are largely used with remote sensing data and have been used to support measurements from numerous campaigns, from satellite to aircraft or ground and mobile based measurements. The files from airborne field studies, however, vary greatly in terms of the file structure and the amount and content of metadata. Information relevant to the file that can be useful to the user such as the data producer, location where data was taken, variable descriptions, or information about the instrument might not be included in the file. This metadata might be present in another file in the dataset containing the same data using the International Consortium for Atmospheric Research on Transport and Transformation (ICARTT) format. Recently, the Aerosols, Clouds, and their Interactions for Earth System Models (MACIE) group started a grassroots effort to develop a set of requirements for the HDF and NetCDF files for field studies, aiming to make the data products more interoperable and usable. Particularly, these requirements seek to make the files more compliant to Climate and Forecast (CF) metadata conventions and to standardize the file structure and the global and variable attributes. These requirements would help to ensure that HDF and NetCDF files contain adequate metadata to better support their use for research, e.g., the modeling community, and to enhance the usability and interoperability of data for research communities at large. To be presented are the details of the MACIE requirements as well as examples of the implementation of these requirements for merge files and lidar observation data files.

Sean Leavor↗

NASA NTRS1995

Block-structured grids for complex aerodynamic configurations: Current status

The status of CFD methods based on the use of block-structured grids for analyzing viscous flows over complex configurations is examined. The objective of the present study is to make a realistic assessment of the usability of such grids for routine computations typically encountered in the aerospace industry. It is recognized at the very outset that the total turnaround time, from the moment the configuration is identified until the computational results have been obtained and postprocessed, is more important than just the computational time. Pertinent examples will be cited to demonstrate the feasibility of solving flow over practical configurations of current interest on block-structured grids.

Vatsa, Veer N.↗

NASA NTRS1999

Automated Development of Accurate Algorithms and Efficient Codes for Computational Aeroacoustics

The simulation of sound generation and propagation in three space dimensions with realistic aircraft components is a very large time dependent computation with fine details. Simulations in open domains with embedded objects require accurate and robust algorithms for propagation, for artificial inflow and outflow boundaries, and for the definition of geometrically complex objects. The development, implementation, and validation of methods for solving these demanding problems is being done to support the NASA pillar goals for reducing aircraft noise levels. Our goal is to provide algorithms which are sufficiently accurate and efficient to produce usable results rapidly enough to allow design engineers to study the effects on sound levels of design changes in propulsion systems, and in the integration of propulsion systems with airframes. There is a lack of design tools for these purposes at this time. Our technical approach to this problem combines the development of new, algorithms with the use of Mathematica and Unix utilities to automate the algorithm development, code implementation, and validation. We use explicit methods to ensure effective implementation by domain decomposition for SPMD parallel computing. There are several orders of magnitude difference in the computational efficiencies of the algorithms which we have considered. We currently have new artificial inflow and outflow boundary conditions that are stable, accurate, and unobtrusive, with implementations that match the accuracy and efficiency of the propagation methods. The artificial numerical boundary treatments have been proven to have solutions which converge to the full open domain problems, so that the error from the boundary treatments can be driven as low as is required. The purpose of this paper is to briefly present a method for developing highly accurate algorithms for computational aeroacoustics, the use of computer automation in this process, and a brief survey of the algorithms that have resulted from this work. A review of computational aeroacoustics has recently been given by Lele.

Goodrich, John W.↗

NASA NTRS1995

The Application of Microwave Incineration to Regenerative Life Support

Future human exploration missions will require life support systems that are highly regenerative, requiring minimum resupply, enabling the crews to be largely self-sufficient. Solid wastes generated in space will be processed to recover usable material. Researchers at NASA Ames Research Center are studying a commercially-produced microwave incinerator as a solid waste processor. This paper will describe the results of testing to-date.

Sun, Sidney C.↗

NASA NTRSDate not supplied

Coupling a Computational Fluid Dynamics Model to a Spacecraft Thermal System Model for the DraMS Instrument Thermal Analysis

The Dragonfly Mass Spectrometer (DraMS) is an instrument on the Dragonfly mission, which will spend 7 years in deep space cruise before landing and operating on the surface of Titan. Vacuum thermal analyses are required for deep space cruise, and convection analyses are required for the Titan surface operations. Model exchanges across multiple thermal teams are needed for all phases of the mission. For DraMS, Thermal Desktop® (TD) has been the main thermal analytical tool of choice due to its capability in modeling complex thermal systems with relatively low computational power and for its availability across thermal teams. However, TD does not have computational fluid dynamics (CFD) capability and struggles to accurately capture complex convective behavior. DraMS has fans operating in tandem and gas flow behaviors are not easily predicted due to its complex flow paths. CFD software, such as Fluent, can model and predict such complex flow behaviors, but CFD models are computationally expensive, and its workflow processes are not tailored towards simulating large and complex systems. Therefore, a coupled modeling approach was chosen for DraMS: A TD model was used for simulating all the conductive, radiative, and source terms, while a Fluent CFD model was added on, as needed, to the TD model to provide the convective boundary conditions using the System Coupling software. The coupling software allows the TD and Fluent models to communicate data and arrive at a co-solved and co-converged solution. Furthermore, Thermal Iso-value Exchange (TIE) method was developed to facilitate and improve the TD-Fluent data exchange process. This paper will discuss the analytical studies that were done to verify the accuracy and usability of the coupled approach and the challenges associated, which lead to the development of the TIE approach. DraMS thermal design and co-solved analysis results will also be discussed.

Heat transfer↗

NASA NTRSDate not supplied

Coupling a Computational Fluid Dynamics (CFD) Model to a Spacecraft Thermal System Model for the DraMS Instrument Thermal Analysis

The Dragonfly Mass Spectrometer (DraMS) is an instrument on the Dragonfly mission, which will spend 7 years in deep space cruise before landing and operating on the surface of Titan. Vacuum thermal analyses are required for deep space cruise, and convection analyses are required for the Titan surface operations. Model exchanges across multiple thermal teams are needed for all phases of the mission. For DraMS, Thermal Desktop (TD) has been the main thermal analytical tool of choice due to its capability in modeling complex thermal systems with relatively low computational power and for its availability across thermal teams. However, TD does not have computational fluid dynamics (CFD) capability and struggles to accurately capture complex convective behavior. DraMS has fans operating in tandem and gas flow behaviors are not easily predicted due to its complex flow paths. CFD software, such as Fluent, can model and predict such complex flow behaviors, but CFD models are computationally expensive, and its workflow processes are not tailored towards simulating large and complex systems. Therefore, a coupled modeling approach was chosen for DraMS: A TD model was used for simulating all the conductive, radiative, and source terms, while a Fluent CFD model was added on, as needed, to the TD model to provide the convective boundary conditions using the System Coupling software. The coupling software allows the TD and Fluent models to communicate data and arrive at a co-solved and co-converged solution. Furthermore, Thermal Iso-value Exchange (TIE) method was developed to facilitate and improve the TD-Fluent data exchange process. This paper will discuss the analytical studies that were done to verify the accuracy and usability of the coupled approach and the challenges associated, which lead to the development of the TIE approach. DraMS thermal design and co-solved analysis results will also be discussed.

heat transfer↗

NASA NTRS1992

Issues in knowledge representation to support maintainability: A case study in scientific data preparation

Scientific data preparation is the process of extracting usable scientific data from raw instrument data. This task involves noise detection (and subsequent noise classification and flagging or removal), extracting data from compressed forms, and construction of derivative or aggregate data (e.g. spectral densities or running averages). A software system called PIPE provides intelligent assistance to users developing scientific data preparation plans using a programming language called Master Plumber. PIPE provides this assistance capability by using a process description to create a dependency model of the scientific data preparation plan. This dependency model can then be used to verify syntactic and semantic constraints on processing steps to perform limited plan validation. PIPE also provides capabilities for using this model to assist in debugging faulty data preparation plans. In this case, the process model is used to focus the developer's attention upon those processing steps and data elements that were used in computing the faulty output values. Finally, the dependency model of a plan can be used to perform plan optimization and runtime estimation. These capabilities allow scientists to spend less time developing data preparation procedures and more time on scientific analysis tasks. Because the scientific data processing modules (called fittings) evolve to match scientists' needs, issues regarding maintainability are of prime importance in PIPE. This paper describes the PIPE system and describes how issues in maintainability affected the knowledge representation used in PIPE to capture knowledge about the behavior of fittings.

Chien, Steve↗

NASA NTRS2021

Remote Concurrent Engineering: A-Team Studies in the Virtual World

NASA Jet Propulsion Laboratory’s (JPL’s)Architecture Team (A-Team) has nearly a decade of experiencein maturing early formulation mission and technology conceptsby combining innovative collaborative engineering methodswith cutting-edge subject matter expertise and advancedanalysis tools in an in-person environment. When COVID-19forced JPL’s workforce to work remotely in March 2020, ATeamhad to quickly pivot from an in-person collaborativeenvironment to a remote working environment.Through introspection, careful planning, and considerablepractice, A-Team was able to develop new operating proceduresto effectively continue early formulation studies in a virtualenvironment. A-Team has held over 57 remote studies in the 10months since the start of mandatory telework at JPL in March2020. In the remote setting, A-Team conducts studies in half-daysessions with clients and subject matter experts (SMEs) viavideoconferencing, shared computer screens, and digitalcollaborative tools.The key lesson is that increased staffing and planning is neededto prepare and successfully run remote A-Team studies. RemoteA-Team studies require careful selection of the appropriatetools for security, accessibility, and usability within theNASA/JPL environment. Knowledge capture methods andtemplates need to be thought out and agreed upon in advance asthere is less room for improvising in a remote format. Variouscommunication channels have to be monitored to allow for teamcoordination while maintaining fruitful participant engagementduring a session. In addition, technical backup for all roleswithin the A-Team have to be identified to allow the study tocontinue even if a team member’s connectivity is temporarilyinterrupted. Finally, careful thought has to be put into methodsand processes to create a collaborative environment in a virtualspace such that a group of experts who are only connected viathe internet can experience the creative spark and flow of a greatcollaborative and innovative study.

Zusack, Steven↗

NASA NTRS1989

[NASA/DOD Aerospace Knowledge Diffusion Research Project. Report 1, part 1:] Technical communications in aeronautics: Results of an exploratory study

A study was undertaken that explored several aspects of technical communications in aeronautics. The study, which utilized survey research in the form of a self-administered questionnaire, was sent to 2,000 randomly selected members of the American Institute of Aeronautics and Astronautics. Six hundred and six usable questionnaires (30.3 percent) were received by the established cut off date. The study had five objectives. The first was to solicit the opinions of aeronautical engineers and scientists regarding the importance of technical communications to their profession; second, to determine their use and production of technical communications; third, to seek their views on the content of an undergraduate course in technical communications; fourth, to determine their use of libraries/technical information centers; and finally, to determine the use and importance of computer and information technology to them. The findings add considerable information to the knowledge of technical communications practices among aeronautical engineers and scientists and reinforce some of the conventional wisdom about technical communications and question other widely-held notions.

Pinelli, Thomas E.↗

NASA NTRS1991

Adaptive optics in coherent lidar wind measurements: A feasibility study

Laser Doppler radar (lidar) is widely used for remote sensing of wind velocities. Usable wavelengths for the laser are limited by the effects of atmospheric turbulence. An adaptive optical system is proposed to compensate for turbulence effects on signal power. The feasibility of an adaptive system is considered in light of the effects of speckle from the aerosol target. It is concluded that adaptive optics is a promising technique for improving the performance of a 2 micron lidar wind measurement system. The chief technical challenges are a laser that will give the required output and pulse repetition rate, a combined Hartmann sensor and heterodyne detector, and a suitable reconstruction algorithm.

Leland, Robert P.↗

NASA NTRS1949

General Characteristics of a Airspeed System using Fuselage Static Vents on a Swept-Wing Airplane

Studies have been made by the NACA wing-flow method of the use of fuselage static orifices between the wing and tail of a swept-wing airplane for possible application to service airspeed installations. The tests were made at zero angle of attack. The results indicate that, although the maximum errors are large, these locations are usable from the consideration that the local Mach numbers at the locations studied are sensitive to variation of the true Mach number within the test Mach number range of 0.7 to 1.2. The maximum errors in Mach number in the subsonic range varied from zero for the most forward location to -0.05 for the most rearward location (indicated Mach number less than true). At Mach numbers above 1.0, the maximum errors were from 0.14 for the most forward location to 0.04 for the most rearward location.

Johnston, J. Ford↗

NASA NTRS1971

Reflectance and transmittance characteristics of several selected green and blue-green unialgae.

Obtained reflectance properties of green and blue-green unialgae are evaluated for determining the feasibility of using selected wavelengths in differentiating between green and blue-green algae. The attempt is made to establish selected wavelengths and ratios that would delineate relative concentrations of the algal suspensions. The results should prove helpful in the selection of spectral bands usable in conjunction with multispectrum scanners for qualitative and quantitative studies of algae in bodies of water.

Gramms, L. C.↗

NASA NTRS1976

A study of the utilization of EREP data from the Wabash River basin

The author has identified the following significant results. The study of the multispectral data sets indicate that better land use delineation using machine processing techniques can be obtained with data from multispectral scanners than digitized S190A photographic sensor data. Results of the multiemulsion photographic data set were a little better than the multiband photographic data set. Comparison results of the interim and filtered S191 data indicate that the data were improved some for machine processing techniques. Results of the S191 X-5 detector array studied over a wintertime scene indicate that a good quality far infrared channel can be useful. The S191 spectroradiometer study results indicate that the data from the S191 was usable, and it was possible to estimate the path radiance.

Silva, L. F.↗

NASA NTRS1980

Space transportation system disconnect

The use of medium duty 300 psi fluid disconnects for orbital servicing was demonstrated to be both practical and technically feasible. A prototype disconnect was designed and tested, based on criteria formulated from a survey of expected usage requirements for orbital servicing concepts. Testing involved the comparison of three seal materials (EPR, Neoprene and Teflon), and two test media (helium and Freon 21), and was conducted over a temperature range of -150 F to +225 F. Results indicate low helium leakage (10 to the -4 power sccs) and extremely low engagement forces (56 lb sub f). Testing was also performed on a new seal design. Design concepts for a cryogenic disconnect and a high pressure disconnect were investigated. Results of an industry survey for usable orbital servicing disconnects and areas needing attention in future studies are discussed.

Source record↗

NASA NTRS1993

The 1992-1993 advanced design program. Part 1: The Mars methane engine project. Part 2: The Mars oxygen processor new furnace

Three constituents of the Martian atmosphere, methane, carbon dioxide, and oxygen, can be used for internal combustion in engines utilized for future space exploration on Mars. These three gases, considered as the test case in this research, will be examined to determine required flow rates needed for combustion and optimization of engine performance. Results of the test case are examined in relation to a base case of methane and air for comparative purposes. Testing of exhaust temperatures, cylinder pressure, and exhaust gas analysis were performed for the base case and test case. Also described is a study utilizing a zirconia cell to convert carbon dioxide into usable oxygen to help support future Mars missions.

Lauer, Stephen↗