Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “physisorption”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Multiple experimental studies of pore structure and mineral grain sizes of the Woodford shale in southern Oklahoma, USA

Pore structure study is an important part of unconventional shale reservoir characterization, since the pore system provides the primary petroleum storage space and fluid flow pathways. Previous studies have suggested that the pore structure is related to the total organic carbon (TOC) content, mineral compositions, and the maturity of the organic matter (OM). However, few studies have focused on the mineral grains, the primary grains being deposited but before cementation, which are the building blocks of shale. Eight Woodford Shale outcrop samples from southern Oklahoma were chosen to study the effects of mineral grain size on the pore structure characterization, using multiple and complementary experimental approaches, including laser diffraction, mineralogy, TOC, pyrolysis, liquid immersion porosimetry, mercury intrusion porosimetry, gas physisorption, (ultra) small angle X-ray scattering, scanning electron microscopy, and spontaneous imbibition. The results from different experiments of eight samples show that the Woodford Shale has the mean mineral grain diameters at 3–6 μm, a wide range of porosity at 3–40% and pore diameters at 50–1,000 nm, and various pore connectivity. Grain size variation was probably caused by the sea-level fluctuation during its deposition, which affect the porosity, pore size distribution, and pore connectivity. With decreasing mineral grain sizes, the porosity tends to increase while the pore connectivity worsens. The results also indicate that OM and carbonates in this low-maturity Woodford Shale could block the pores and decrease the porosity. Coupling with the grain size analyses, the control of depositional environment on grain sizes and subsequent effects on pore structure is identified. The pore structure characteristics over a wide pore-diameter range provided by multiple experiments could improve the understanding of storage space and fluid flow in the Woodford Shale to further increase its petroleum production.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

A density functional theory analysis of the adsorption and surface chemistry of inorganic iodine species on graphitea

In the event of a nuclear accident, fission products may be released into the environment. The release of 131 I is of particular concern to human health. Iodine can be captured using a number of materials and frequently, this is accomplished with activated carbon impregnated with organic bases. Previous studies have used DFT and the graphite (0001) surface as a surrogate for adsorption, those studies focus on the species I • , I 2 , and CH 3 I. In this work we perform an ab initio study of the adsorption onto the surface of a graphite sheet of I 2 , CH 3 I, and inorganic acidic iodine species (HI, HOI, HIO 2 , and HIO 3 ), which were selected to examine the possible effect of oxidation state on adsorption. The PBE exchange-correlation functional with D3 dispersion was employed. It was found that for molecular iodine, the iodine atoms tended to either situate above the center of a hexagonal site on the graphite or directly atop a carbon atom with the lighter components resting closer to the graphite. For each species the relative binding energies spanned the range of 21–33 kJ mol -1 and graphite-iodine distance was in the range of 3.52–3.93 Å. In all cases we found no significant charge transfer between the iodine species and the graphite, thus we conclude that all the iodine species studied undergo strong physisorption to the graphite.

Ritzmann, Andrew M.↗
DOE OSTI2023

Impact of Oxygen Storage Components in Prototype Pd-Based Three-Way Catalysts under Exhaust Conditions Relevant to Propane Engines

With increasing concerns about global warming, the push for sustainable and eco-friendly fuels is accelerating. Propane, recognized as liquefied petroleum gas or LPG, has garnered research interest as an alternative fuel due to its notable advantages, including a high-octane rating, reduced greenhouse gas emissions, and potential cost-effectiveness. However, to realize its full potential as an alternative fuel it is essential to develop catalysts that efficiently handle emissions at low temperatures. In our research, we investigated three distinct palladium (Pd)-based three-way catalyst (TWC) formulations (PdRh, Pd-only, and Pd-OSC) to investigate the influence of typical TWC components rhodium (Rh) and oxygen storage components (OSC) in exhaust scenarios relevant to propane-fueled engines. Among these, the formulation containing oxygen storage components (Pd-OSC) showed the highest reactivity for both NO and C 3 H 8 while minimizing performance degradation from hydrothermal aging (HTA). Notably, the temperature of 50% conversion (T50) for propane in the Pd-OSC fresh and HTA sample was lower by 30 °C and 13 °C, respectively, compared to the Pd-only sample, highlighting the role of oxygen storage materials in enhancing catalyst performance, even without dithering. Additionally, N 2 physisorption showed that the PdOSC sample has a higher surface area and increased pore volume. This underscores the idea that OSC materials not only augment the catalyst’s porosity but also optimize reactant accessibility to active sites, thus elevating catalytic efficiency. In addition to evaluating performance, we further explored the performance and characteristics of the catalysts using catalytic probe reactions, such as water–gas shift and steam reforming reactions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Separation of Radionuclides from a Rare Earth-Containing Solution by Zeolite Adsorption

The increasing industrial demand for rare earths requires new or alternative sources to be found. Within this context, there have been studies validating the technical feasibility of coal and coal byproducts as alternative sources for rare earth elements. Nonetheless, radioactive materials, such as thorium and uranium, are frequently seen in the rare earths’ mineralization, and causes environmental and health concerns. Consequently, there exists an urgent need to remove these radionuclides in order to produce high purity rare earths to diversify the supply chain, as well as maintain an environmentally-favorable extraction process for the surroundings. In this study, an experimental design was generated to examine the effect of zeolite particle size, feed solution pH, zeolite amount, and contact time of solid and aqueous phases on the removal of thorium and uranium from the solution. The best separation performance was achieved using 2.50 g of 12-µm zeolite sample at a pH value of 3 with a contact time of 2 h. Under these conditions, the adsorption recovery of rare earths, thorium, and uranium into the solid phase was found to be 20.43 wt%, 99.20 wt%, and 89.60 wt%, respectively. The Freundlich adsorption isotherm was determined to be the best-fit model, and the adsorption mechanism of rare earths and thorium was identified as multilayer physisorption. Further, the separation efficiency was assessed using the response surface methodology based on the development of a statistically significant model.

58 GEOSCIENCES↗
DOE OSTI2025

Effect of Preparation Conditions of Fe@SiO2 Catalyst on Its Structure Using High-Pressure Activity Studies in a 3D-Printed SS Microreactor

Fischer–Tropsch synthesis (FTS) in a 3D-printed stainless steel (SS) microchannel microreactor was investigated using Fe@SiO2 catalysts. The catalysts were prepared by two different techniques: one pot (OP) and autoclave (AC). The mesoporous structure of the two catalysts, Fe@SiO2 (OP) and Fe@SiO2 (AC), ensured a large contact area between the reactants and the catalyst. They were characterized by N2 physisorption, H2 temperature-programmed reduction (H2-TPR), scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray diffraction (XRD), Fourier-transform infrared spectroscopy (FTIR), X-ray photoelectron microscopy (XPS), and thermogravimetric analysis–differential scanning calorimetry (TGA-DSC) techniques. The AC catalyst had a clear core–shell structure and showed a much greater surface area than that prepared by the OP method. The activities of the catalysts in terms of FTS were studied in the 200–350 °C temperature range at 20-bar pressure with a H2/CO molar ratio of 2:1. The Fe@SiO2 (AC) catalyst showed higher selectivity and higher CO conversion to olefins than Fe@SiO2 (OP). Stability studies of both catalysts were carried out for 30 h at 320 °C at 20 bar with a feed gas molar ratio of 2:1. The Fe@SiO2 (AC) catalyst showed higher stability and yielded consistent CO conversion compared to the Fe@SiO2 (OP) catalyst.

Biochemistry & Molecular Biology↗
DOE OSTI2025

Effect of Fe on Co-Based SiO2Al2O3 Mixed Support Catalyst for Fischer–Tropsch Synthesis in 3D-Printed SS Microchannel Microreactor

This research explores the effect of a composite support of SiO2 and Al2O3 with Fe and Co incorporated as catalysts for Fischer–Tropsch synthesis (FTS) using a 3D-printed stainless steel (SS) microchannel microreactor. Two mesoporous catalysts, FeCo/SiO2Al2O3 and Co/SiO2Al2O3, were synthesized via a one-pot (OP) method and extensively characterized using N2 physisorption, XRD, SEM, TEM, H2-TPR, TGA-DSC, FTIR, and XPS. H2-TPR results revealed that the synthesis method significantly affected the reducibility of metal oxides, thereby influencing the formation of active FTS sites. SEM-EDS and TEM further revealed a well-defined hexagonal matrix with a porous surface morphology and uniform metal ion distribution. FTS reactions, carried out in the 200–350 °C temperature range at 20 bar with a H2/CO molar ratio of 2:1, exhibited the highest activity for FeCo/SiO2Al2O3, with up to 80% CO conversion. Long-term stability was evaluated by monitoring the catalyst performance for 30 h on stream at 320 °C under identical reaction conditions. The catalyst was initially active for the methanation reaction for up to 15 h, after which the selectivity for CH4 declined. Correspondingly, the C4+ selectivity increased after 15 h of time-on-stream, indicating a shift in the product distribution toward longer-chain hydrocarbons. This trend suggests that the catalyst undergoes gradual activation or restructuring under reaction conditions, which enhances chain growth over time. The increase in C4+ products may be attributed to the stabilization of the active sites and suppression of methane or light hydrocarbon formation.

Biochemistry & Molecular Biology↗
DOE OSTI2025

Raw Data for: Ultra-Confined Environments May Restrict the Possible Configurations of Supported Metal Complexes

Raw NMR data (1D 2H spectrum and pseudo-2D 2H CODEX spectra) in Bruker topspin format. Raw DRIFTS IR data as text files. Results from the DFT potential energy surface scans (coordinates are in the supporting information of the main publication). Raw BET nitrogen physisorption isotherms and the determined more size distributions.

Perras, Frederic A [Ames National Laboratory]↗
DOE OSTI2020

Facilitated Transport Membranes with Tunable Amine-CO 2 Chemistry for CO 2 /H 2 Separation

CO 2 -selective, amine-containing facilitated transport membranes are of great interest for syngas purification since high-pressure H 2 can be retained upon CO 2 removal. A variety of amine-containing polymers have shown decent chemical and thermal stability at aggressive conditions, but their CO 2 /H 2 separation properties are largely limited by the hydrostatic compaction and severe carrier saturation associated with the high syngas pressure. Herein, we report a new approach to enhance the CO 2 permeability by manipulating the steric hindrance of the amine carriers. A series of α-aminoacids with different alkyl or hydroxyethyl substituents are deprotonated by 2-(1-piperazinyl)ethylamine, leading to nonvolatile amine carriers with different degrees of steric hindrance. For hosting the low MW amine carriers, a highly crosslinked poly(vinyl acetal) is synthesized as a water-swellable polymer network. In order to avoid membrane compaction, perforated graphene oxide mono-sheets are dispersed as reinforcement fillers. In the presence of moisture, a bulkier alkyl substituent to the amino site (increasing steric hindrance) destabilizes the carbamate adduct and thus drastically increases the chemisorption of CO 2 , while the incorporation of ethylene oxide groups provides additional physisorption of CO 2 . The enhanced CO 2 solubility significantly mitigates the carrier saturation behavior, and an unprecedented CO 2 /H 2 selectivity greater than 100 is demonstrated at 107 °C and 12.5 atm of CO 2 partial pressure. As the CO 2 partial pressure reduces to 0.4 atm, a less hindered amine yields a higher reactive diffusivity of CO 2 , resulting in a CO 2 permeance of 435 GPU with a selectivity greater than 500. These reaction-mediated polymeric membranes are well above the theoretical upper bound, and they are of great interest for designing a highly-selective membrane process for syngas purification.

08 HYDROGEN↗
DOE OSTI2020

Conversion, Stability, and Selectivity Improvements Through Catalyst Development for the Reductive Etherification Reaction

Economical pathways from lignocellulosic non-food biomass feedstocks to biofuels with appropriate fuel properties are necessary for displacing fossil-fuel derived diesel use in medium-/heavy duty vehicles. Oxygenated compounds have recently shown promise due to low sooting tendencies and autoignition properties and molecules with sufficiently high carbon numbers can meet the requisite standards for water solubility and flash point. Coupling waste biomass derived small molecules into bioblendstock targets through the reductive etherification reaction shows potential for increasing molecular weight without losing the advantages of oxygenates. However, the transition to industrial viability for this process is limited by strong catalyst deactivation in typical flow reactor systems. Strong acid resins such as Amberlyst-15 (A-15) show excellent activity in batch reactions but are limited to low temperatures and are poisoned by the side-product, water. In this talk, I will describe our recent work in catalyst synthesis and testing to select superior options with improved aqueous and thermal stability in reductive etherification flow reactions. Water-tolerant solid acid catalysts have potential to improve the conversion and selectivity to the ether target at temperatures above the degradation point of A-15. Analysis techniques such as physisorption, chemisorption, x-ray diffraction and transmission electron microscopy are being used to characterize the active sites. These techniques are also being used to evaluate degradation of the catalyst after extensive flow reactions in addition to comparative efficiency testing with standardized cyclohexene hydrogenation reactions. Finally, I will discuss a demonstration of the full pathway from bio-derived butyric acid to the performance-advantaged ether product and the additional obstacles from side-products and purification limitations in the preliminary upgrading reactions.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗
DOE OSTI2021

Atomic Layer Deposition for Materials-Based H2 Storage: Opportunities and Limitations

The transportation demands in our growing hydrogen (H2) economy requires robust storage systems. The current commercially implemented technology in fuel cell cars relies on the well-established technology of hydrogen gas compressed to 350-700 bar, depending on the application. The compressed gas tanks in use today are bulky and cost intensive. To address this challenge, material-based storage is one of the long-term alternatives considered and constitutes the focus of this talk. Material-based storage is broadly defined as hydrogen bound to solid materials, with its binding strength varying from physisorption to porous materials, such as zeolites and metal organic frameworks, to chemisorption in (complex) metal hydrides. The ultimate targets set by the U.S. Department of Energy for this technology include a system gravimetric capacity of 6.5 wt% and volumetric capacity of 40 g/L at 100 bar, operating temperatures ranging between -40 C and +40 C and adsorption/desorption timescales of < 5 min. Storage in the form of physisorbed or chemisorbed hydrogen has guided the materials research, which metal- organic framework and (complex) metal hydrides being the most promising materials classes. A variety of these materials have met one or more of the targets, but it has remained elusive for a single material system to meet all these stringent requirements. Nano-encapsulation and low-concentration chemical additives have previously been employed separately to overcome such challenges. Functionalization via atomic layer deposition (ALD), however, offers unique characteristics that make it suitable for both, nano-encapsulation and "doping" with low-concentration additives. This deposition technique has sub-monolayer thickness control, is highly conformal in high-surface area materials and is self-limiting, i.e., once the gas-phase precursor reacts with the available surface sites, the surface reactions stop. In this presentation, we will showcase examples where ALD, more generally vapor-phase functionalization, on (complex) metal hydrides and organic frameworks has improved the material properties for H2 storage. In our first study, Al2O3 was deposited on magnesium borohydride, Mg(BH4)2, at room temperature using trimethylaluminum (TMA) and water. From our findings, encouraging initial results were obtained: the H2 desorption temperature was lowered by 60-120 degrees C, the desorbed gravimetric H2 capacity at temperatures < 250 degrees C was doubled, and the desorption kinetics increased by a factor of ~6 compared to uncoated Mg(BH4)2. However, hydrolysis reactions caused by residual surface -OH groups from the ALD water-pulse degraded the sample substantially. Through this study, the use of TMA was observed to be highly reactive with the Mg(BH4)2 surface species, leading to the strategy of exposing the sample only to TMA. The relative mole fraction of the vapor-phase additive can be precisely controlled with the number of TMA pulses and pulse duration. By tuning these parameters, we show in our second study that 10 pulses of TMA at ambient conditions were able to decrease the H2 desorption temperature by ~100 degrees C while retaining <95 % of its H2 capacity. We applied this approach with other additives such as BBr3, TiCl4 and tetrahydrofuran, and demonstrate that this unique approach opens the door to a new class of molecular additives and catalysts which cannot easily be introduced with conventional mechano-chemical or solvent-based techniques for (complex) metal-hydrides. In the case of metal organic frameworks, ALD is a promising technique to functionalize the pores with metal atoms or functional groups able to tune the gas selectivity and binding energy, for which ~15 kJ/mol has been established as the optimal value for H2 storage in sorbent materials. Vapor-phase techniques such as ALD have numerous benefits over other functionalization tools for H2 storage materials opening innumerable opportunities to the field. To exploit these opportunities, the current limitations on room temperature and water-less ALD processes needs to be overcome which will greatly expand the possibilities of encapsulation and incorporation of additives for organic frameworks and (complex) metal hydrides.

atomic layer deposition↗
DOE OSTI2021

Amino‐Functionalised Hybrid Ultramicroporous Materials that Enable Single‐Step Ethylene Purification from a Ternary Mixture

Abstract Pyrazine‐linked hybrid ultramicroporous (pore size <7 Å) materials (HUMs) offer benchmark performance for trace carbon capture thanks to strong selectivity for CO 2 over small gas molecules, including light hydrocarbons. That the prototypal pyrazine‐linked HUMs are amenable to crystal engineering has enabled second generation HUMs to supersede the performance of the parent HUM, SIFSIX‐3‐Zn , mainly through substitution of the metal and/or the inorganic pillar. Herein, we report that two isostructural aminopyrazine‐linked HUMs, MFSIX‐17‐Ni (17=aminopyrazine; M=Si, Ti), which we had anticipated would offer even stronger affinity for CO 2 than their pyrazine analogs, unexpectedly exhibit reduced CO 2 affinity but enhanced C 2 H 2 affinity. MFSIX‐17‐Ni are consequently the first physisorbents that enable single‐step production of polymer‐grade ethylene (>99.95 % for SIFSIX‐17‐Ni ) from a ternary equimolar mixture of ethylene, acetylene and CO 2 thanks to coadsorption of the latter two gases. We attribute this performance to the very different binding sites in MFSIX‐17‐Ni versus SIFSIX‐3‐Zn .

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Stoichiometric metal nitration based novel green synthesis of mesoporous metal oxides and their enhanced heterogeneity

Here, in this work, a general and novel method for the green synthesis of mesoporous metal oxides via stoichiometric metal nitration has been demonstrated. Pluronic surfactants and their effect on synthesis procedures in terms of surface area have been experimentally studied in detail. Contrary to the traditional synthesis procedure, water has been utilized as the solvent and in several cases, such as tin oxide, manganese oxide, aluminum oxide, antimony oxide, zinc oxide, cobalt oxide, copper oxide, yttrium oxide, lanthanum oxide, and silver either the highest or comparable surface areas have been successfully synthesized. Through XRD, and TEM, all materials were observed to be crystalline except silver and magnesium oxide. SEM shows that with an increase in surfactant molar mass agglomeration decreases. Ammonia chemisorption on acidic materials gives quantitative amounts of ammonia chemical bonding with catalysts, whereas carbon dioxide chemisorption gives a quantitative value of CO 2 chemical binding with basic sites. As high as 1901.8 μmol/g and 994.6 μmol/g ammonia chemisorption values for oxides of vanadium and tin were achieved. Amphoteric materials give both acidic and basic enhanced adsorption. Finally, all synthesized materials are studied under organic catalytic transformations. Benzyl bromide is theoretically more active compared with benzylamine and benzyl alcohol which was also experimentally shown through the conversion.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Evidence for nitrogen binding to surface defects for topological insulator Bi 2 Se 3

Using scanning tunneling spectroscopy and theoretical simulations we have studied the effects of nitrogen gas exposure on the electronic density of states of Bi 2 Se 3 , a well-studied topological insulator. In carefully controlled measurements, Bi 2 Se 3 crystals were initially cleaved in a helium gas environment and then exposed to a 22 SCFH flow of ultra-high purity N 2 gas. We observe a resulting change in the spectral curves, with the exposure effect saturating after approximately 50 min, ultimately bringing the Dirac point about 50 meV closer to the Fermi level. Furthermore, these results are compared to density functional theory calculations, which support a picture of N 2 molecules physisorbing near Se vacancies. Furthermore, ab initio molecular dynamics simulations aided by a Blue Moon ensemble method reveal the dissociative adsorption of N 2 molecules which then bind strongly to Se vacancies at the surface. In this scenario, the binding of the N atom to a Se vacancy site removes the surface defect state created by the vacancy and changes the position of the Fermi energy with respect to the Dirac point.

36 MATERIALS SCIENCE↗
DOE OSTI2025

The Temperature Dependence of the Langmuir Adsorption Model for a Single-Site Metal–Organic Framework

The single-site Langmuir adsorption model, also known as the Langmuir isotherm equation, is one of the simplest possible descriptions of adsorption phenomena, and yet finds widespread applicability across a range of disciplines. In its simplest form, it is deployed to treat adsorption equilibria at constant temperature (i.e., along isotherms); however, at the heart of its derivation is a more general class of models that each incorporate an explicit temperature dependence, subject to assumptions about the spatial/translational degrees of freedom of the adsorbed species. In this work, measurements of the temperature dependence of supercritical adsorption of H 2 on a single-site metal-organic framework (MOF) are presented, and fitted using a range of Langmuir models with distinct treatments of degrees of freedom in the adsorbed phase. Surprisingly, all of the models can be used to adequately represent the measured data, despite yielding significantly different values for binding energy and the temperature dependence of the isosteric enthalpy of adsorption (i.e., the isosteric heat, qst). Furthermore, a critical finding is that the mean-temperature isosteric enthalpy of adsorption remains consistent across all models within experimental error, highlighting its reliability for evaluating adsorption thermodynamics.

08 HYDROGEN↗
DOE OSTI2024

Electric charging effects on insulating surfaces in cryogenic liquids

Here, this paper presents a new technique to study the adsorption and desorption of ions and electrons on insulating surfaces in the presence of strong electric fields in cryoliquids. The experimental design consists of a compact cryostat coupled with a sensitive electro-optical Kerr device to monitor the stability of the electric fields. The behavior of nitrogen and helium ions on a poly(methyl methacrylate) (PMMA) surface was compared to a PMMA surface coated with a mixture of deuterated polystyrene and deuterated polybutadiene. Ion accumulation and removal on these surfaces were unambiguously observed. Within the precision of the data, both surfaces behave similarly for the physisorbed ions. The setup was also used to measure the (quasi-)static dielectric constant of PMMA at T ≈ 70 K. The impact of the ion adsorption on the search for a neutron permanent electric dipole moment in a cryogenic environment, such as the nEDM@SNS experiment, is discussed.

Cryogenics↗
DOE OSTI2022

Single-molecule magnet Mn 12 on GaAs-supported graphene: Gate field effects from first principles

In this work, we study gate field effects on the Mn 12 O 12 (COOH) 16 (H 2 O) 4 | graphene | GaAs heterostructure via first-principles calculations. We find that under moderate doping levels electrons can be added to but not taken from the single-molecule magnet Mn 12 O 12 (COOH) 16 (H 2 O) 4 (Mn 12 ). The magnetic anisotropy energy (MAE) of Mn 12 decreases as the electron doping level increases, due to electron transfer from graphene to Mn 12 and change in the band alignment between Mn 12 and graphene. At an electron doping level of -5.00×10 13 cm -2 , the MAE decreases by about 18% compared with zero doping. The band alignment between graphene and GaAs is more sensitive to electron doping than to hole doping, since the valence band of GaAs is close to the Fermi level. The GaAs substrate induces a small band gap in the supported graphene under zero gate field and a nearly strain-free configuration. Finally, we propose a vertical tunnel junction for probing the gate dependence of MAE via electron transport measurements.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2020

Consistency and reproducibility in atomic layer deposition

Atomic layer deposition (ALD) is a thin film synthesis technique that can provide exquisite accuracy and precision in film thickness and composition even on complex, large area substrates. Based on self-limiting surface chemistry, ALD can be insensitive to process conditions and reactor designs, allowing an ALD process developed in one lab to be easily reproduced in other labs. In practice, however, ALD is sometimes difficult to reproduce or replicate, and the results can vary substantially between ALD reactors and between labs. This is exemplified by large deviations in reports on the growth of, e.g., Al2O3, FeOx, and TiO2 given the same precursors under similar conditions. Furthermore, the problem of irreproducibility seems to be growing as ALD is adopted by more researchers and integrated into new applications. In this article, the authors highlight some of the major sources of variations and errors and common misconceptions related to ALD. In particular, the authors focus on issues related to precursors, substrates, and deposition tools. The authors illustrate these problems through examples from the literature, and they present results from numerical simulations that describe how nonidealities would manifest in thickness profiles in a typical cross-flow reactor. They also describe how reproducibility in ALD is linked to consistent experimental practice and reporting between labs. The authors’ hope is that by educating newcomers to ALD and advocating for consistent reporting of deposition conditions, they can minimize irreproducibility and enable ALD practitioners to realize the full potential afforded by self-limiting surface chemistry.

36 MATERIALS SCIENCE↗