Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “cubic crystals”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

MgPd 2 Sb : A Mg-based Heusler-type superconductor

Here, we report the synthesis and physical properties of a full Heusler compound, MgPd 2 Sb, which we found to show superconductivity below T c = 2.2 K . MgPd 2 Sb was obtained by a two-step solid-state reaction method and its purity and cubic crystal structure [Fm-3m, a = 6.4523(1) Å ] were confirmed by powder x-ray diffraction. Normal and superconducting states were studied by electrical resistivity, magnetic susceptibility, and heat capacity measurements. The results show that MgPd 2 Sb is a type-II, weak coupling superconductor ( λ e-p = 0.53 ). The observed pressure dependence of T c (ΔT c /p ≈ -0.23 K / GPa ) is one of the strongest reported for a superconducting Heusler compound. The electronic structure, phonons, and electron-phonon coupling in MgPd 2 Sb were theoretically investigated. The obtained results are in agreement with the experiment, confirming the electron-phonon coupling mechanism of superconductivity. We compare the superconducting parameters to those of all reported Heusler-type superconductors.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Fragmentation of faceted crystalline wires

The reduction of surface energy is a well-known driving force for the fragmentation of nanowires. Fragmentation can limit the service life of those small low-dimensional building blocks or can be controlled to induce beneficial shape changes. For isotropic surface energy, fragmentation is analogous to the classic Rayleigh-Plateau instability of liquid jets. However, commonly synthesized crystalline nanowires have strongly anisotropic surface energies and exhibit facets coinciding with cusps in the Wulff plot. Depending on growth orientation, different fragmentation behaviors have been seen in nanowires. Using phase-field simulations, we show that fragmentation of faceted nanowires with cubic crystal symmetry may occur by a finite-amplitude nonlinear instability, as opposed to a Rayleigh-Plateau-like linear instability, depending on nanowire growth orientation. Here, we carry out a weakly nonlinear analysis based on sharp interface theory to characterize the faceted nanowire shape corresponding to a surface-energy saddle point. The analysis predicts that the minimum amplitude of a periodic shape perturbation to trigger fragmentation increases with cusp strength but decreases inversely proportionally to the perturbation wavelength for long wavelengths, in good quantitative agreement with phase-field predictions. The results provide the theoretical foundation to predict nanowire stability as a function of length and surface energy in diverse applications.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Swap motion–directed twinning of nanocrystals

Twinning frequently occurs in nanocrystals during various thermal, chemical, or mechanical processes. However, the nucleation and propagation mechanisms of twinning in nanocrystals remain poorly understood. Through in situ atomic resolution transmission electron microscopy observation at millisecond temporal resolution, we show the twinning in Pb individual nanocrystals via a double-layer swap motion where two adjacent atomic layers shift relative to one another. The swap motion results in twin nucleation, and it also serves as a basic unit of movement for twin propagation. Our calculations reveal that the swap motion is a phonon eigenmode of the face-centered cubic crystal structure of Pb, and it is enhanced by the quantum size effect of nanocrystals.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Status and results from the CUORE experiment

The Cryogenic Underground Observatory for Rare Events (CUORE) is a tonne-scale cryogenic experiment located at the Laboratori Nazionali del Gran Sasso that exploits bolometric technique to search for neutrinoless double beta decay [0$vββ$] of 130 Te. The detector consists of a segmented array of 988 natural TeO 2 cubic crystals arranged in a cylindrical compact structure of 19 towers. The detector construction was completed in August 2016 and data taking started in Spring 2017. Here, we present a brief description of the bolometric technique for rare events search and the CUORE detector, then we concentrate on the data analysis results. In this respect, we focus on the procedure for data processing and on the first 0$vββ$ results we obtained from a total TeO 2 exposure of 86.3 kg · yr. Next, we illustrate the main background sources and the CUORE background model, from which we obtain the most precise measurement of 130 Te 2$vββ$ half-life to date. Finally, we discuss the improvements achieved with 2018 and 2019 detector optimization campaigns and the current perspectives of our experiment.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2023

Parallel Dislocation Simulator

ParaDiS, or Parallel Dislocation Simulator, is a simulation tool that performs direct numerical simulation of dislocation ensembles, the carriers of plasticity, to predict the strength in crystalline materials from the fundamental physics of defect motion, evolution, and interaction. The code has been successfully deployed on high performance computing architectures and used to study the origins of strength and strain hardening for cubic crystals, the strength of micro-pillars, and irradiated materials at LLNL. The ParaDiS code has been successfully deployed on more than one hundred thousand CPU's with over ten million active degrees of freedom.

Bulatov, Vasily↗
NASA NTRS1975

Correlation of materials properties with the atomic density concept

Based on the hypothesis that the number of atoms per unit volume, accurately calculable for any substance of known real density and chemical composition, various characterizing parameters (energy levels of electrons interacting among atoms of the same or different kinds, atomic mass, bond intensity) were chosen for study. A multiple exponential equation was derived to express the relationship. Various properties were examined, and correlated with the various parameters. Some of the properties considered were: (1) heat of atomization, (2) boiling point, (3) melting point, (4) shear elastic modulus of cubic crystals, (5) thermal conductivity, and (6) refractive index for transparent substances. The solid elements and alkali halides were the materials studied. It is concluded that the number of different properties can quantitively be described by a common group of parameters for the solid elements, and a wide variety of compounds.

Source record↗
NASA NTRS1980

Heterodyne signal-to-noise ratios in acoustic mode scattering experiments

The relation between the signal to noise ratio (SNR) obtained in heterodyne detection of radiation scattered from acoustic modes in crystalline solids and the scattered spectral density function is studied. It is shown that in addition to the information provided by the measured frequency shifts and line widths, measurement of the SNR provides a determination of the absolute elasto-optical (Pockel's) constants. Examples are given for cubic crystals, and acceptable SNR values are obtained for scattering from thermally excited phonons at 10.6 microns, with no external perturbation of the sample necessary. The results indicate the special advantages of the method for the study of semiconductors.

Cochran, W. R.↗
NASA NTRS1982

Intermetallics as alternative materials

Aluminum containing intermetallics have B2 cubic crystal structures, exist over a wide range of composition, have large solubilities for third element alloying additions, are capable of both low and high temperature plastic flow, and have very high melting temperatures (approximately 1900 K) except for FeAl. The slow strain rate elevated temperature properties of Fe, Ni, and Co aluminides are investigated. Because of the reported difficulties with traditional melting/casting methods, sound polycrystalling materials are fabricated by hot extrusion of steel canned blended prealloyed powders. These binary aluminides are used to develop base line elevated temperature mechanical properties as well as an understanding of the factors which affect/control the strength and ductility.

Whittenberger, J. D.↗
NASA NTRS1990

Preliminary investigation of a NiAl composite prepared by cryomilling

An attempt has been made to improve the high temperature mechanical strength of the B2 cubic crystal structure intermetallic NiAl by dispersion strengthening. Prealloyed Ni-51 at. pct Al was cryomilled with a Y2O3 addition to form an yttria dispersoid within the intermetallic matrix. Following milling, the powder was hot extruded to full density and machined into test coupons. Compression testing between 1200 and 1400 K indicated that the cryogenic process yielded the strongest NiAl based material tested to date. Creep resistance was six times better than NiAl and twice that of a NiAl particulate composite containing 10 vol pct TiB2. Surprisingly, transmission electron microscopy revealed that the second phase was inhomogeneously distributed. Furthermore, X-ray analysis indicated that the second phase was not Y2O3 but rather AlN.

Whittenberger, J. Daniel↗
NASA NTRS1990

A simplified orthotropic viscoplasticity theory based on overstress

The viscoplasticity theory based on overstress, a simplified version of Sutcu (1985) theory, is presented for the case of orthotropy. The theory permits asymptotic solutions for checking numerical experiments and for identification of material properties. It is applicable to materials with rate(time) dependence, hysteresis, and a permanent set, such as cubic crystals, directionally solidified alloys, and metal matrix composites. Though it is a unified type theory, with effects of creep and plasticity not separated, it allows to identify viscous and plastic contributions to the stress in the asymptotic state.

Sutcu, M.↗
NASA NTRS1995

On spurious bulk wave excitation in SAW grating reflectors on GaAs(001)(110)

Reflection of SAW (surface acoustic waves) from groove gratings on a cubic crystal is analyzed numerically on the basis of perturbation theory. It is shown that for certain angles of incidence, the conversion of SAW into bulk waves vanishes. This reduces the SAW reflection loss from grating.

Danicki, E.↗
NASA NTRS2000

Characterization of Molybdate Conversion Coatings for Aluminum Alloys by Electrochemical Impedance Spectroscopy

Electrochemical impedance spectroscopy (EIS) was used to investigate the corrosion inhibiting properties of newly developed proprietary molybdate conversion coatings on aluminum alloy 2024-T3 under immersion in aerated 5% (w/w) NaCl. Corrosion potential and EIS measurements were gathered for six formulations of the coating at several immersion times for two weeks. Nyquist as well as Bode plots of the data were obtained. The conversion-coated alloy panels showed an increase in the corrosion potential during the first 24 hours of immersion that later subsided and approached a steady value. Corrosion potential measurements indicated that formulations A, D, and F exhibit a protective effect on aluminum 2024-T3. The EIS spectra of the conversion-coated alloy were characterized by an impedance that is higher than the impedance of the bare alloy at all the immersion times. The low frequency impedance, Z(sub lf) (determined from the value at 0.05 Hz) for the conversion-coated alloy was higher at all the immersion times than that of the bare panel. This indicates improvement of corrosion resistance with addition of the molybdate conversion coating. Scanning electron microscopy (SEM) revealed the presence of cracks in the coating and the presence of cubic crystals believed to be calcium carbonate. Energy dispersive spectroscopy (EDS) of the test panels revealed the presence of high levels of aluminum, oxygen, and calcium but did not detect the presence of molybdenum on the test panels. X-ray photoelectron spectroscopy (XPS) indicated the presence of less than 0.01 atomic percent molybdenum on the surface of the coating.

Calle, Luz Marina↗
NASA NTRS1995

The Metastable Persistence of Vapor-Deposited Amorphous Ice at Anomalously High Temperatures

Studies of the gas release, vaporization behavior and infrared (IR) spectral properties of amorphous and crystalline water ice have direct application to cometary and planetary outgassing phenomena and contribute to an understanding of the physical properties of astrophysical ices. Several investigators report anomalous phenomena related to the warming of vapor-deposited astrophysical ice analogs. However gas release, ice volatilization and IR spectral features are secondary or tertiary manifestations of ice structure or morphology. These observations are useful in mimicking the bulk physical and chemical phenomena taking place in cometary and other extraterrestrial ices but do not directly reveal the structural changes which are their root cause. The phenomenological interpretation of spectral and gas release data is probably the cause of somewhat contradictory explanations invoked to account for differences in water ice behavior in similar temperature regimes. It is the microstructure, micromorphology and microchemical heterogeneity of astrophysical ices which must be characterized if the mechanisms underlying the observed phenomena are to be understood. We have been using a modified Transmission Electron Microscope to characterize the structure of vapor-deposited astrophysical ice analogs as a function of their deposition, temperature history and composition. For the present experiments, pure water vapor is deposited at high vacuum onto a 15 K amorphous carbon film inside an Hitachi H-500H TEM. The resulting ice film (approx. 0.05 micrometers thick) is warmed at the rate of 1 K per minute and diffraction patterns are collected at 1 K intervals. These patterns are converted into radial intensity distributions which are calibrated using patterns of crystalline gold deposited on a small part of the carbon substrate. The small intensity contributed by the amorphous substrate is removed by background subtraction. The proportions of amorphous and crystalline material in each pattern are determined by subtracting a percentage of crystalline component relative to amorphous and pure crystalline endmembers. Vapor-deposited water ice undergoes two amorphous to amorphous structural transformations in the temperature range 15-130 K with important astrophysical implications. The onset of cubic crystallization occurs at 142-160 K (at 1K per minute heating rates) during which the 220 and 311 diffraction maxima appear and 0.1 micrometer crystallites can be seen in bright field images. This transition is time dependent.

Blake, David F.↗
NASA NTRSDate not supplied

Geometric Requirements for Modeling Polycrystalline Representative Volume Elements Using the Generalized Method of Cells

To accurately predict the mechanical response of advanced metallic parts, the grain structure of the metal must be considered and coupled to the macroscale in a multiscale model. The size of the microscale representative volume element must be sufficiently large, and the grid used to discretize the microscale must be adequately refined, in order to ensure an accurate and converged solution. The generalized method of cells is used to predict the mechanical properties of polycrystalline representative volume elements of copper containing randomly oriented grains with the properties of a single face-centered-cubic crystal. Moreover, the results of a parametric study are used to conclude the geometric requirements for an objective microscale model, with respect to the elastic stiffness.

Multiscale Modeling↗
DOE OSTI2020

Harnessing the power of an X-ray laser for serial crystallography of membrane proteins crystallized in lipidic cubic phase

Serial femtosecond crystallography (SFX) with X-ray free-electron lasers (XFELs) has proven highly successful for structure determination of challenging membrane proteins crystallized in lipidic cubic phase; however, like most techniques, it has limitations. Here we attempt to address some of these limitations related to the use of a vacuum chamber and the need for attenuation of the XFEL beam, in order to further improve the efficiency of this method. Using an optimized SFX experimental setup in a helium atmosphere, the room-temperature structure of the adenosine A 2A receptor (A 2A AR) at 2.0 Å resolution is determined and compared with previous A 2A AR structures determined in vacuum and/or at cryogenic temperatures. Specifically, the capability of utilizing high XFEL beam transmissions is demonstrated, in conjunction with a high dynamic range detector, to collect high-resolution SFX data while reducing crystalline material consumption and shortening the collection time required for a complete dataset. The experimental setup presented herein can be applied to future SFX applications for protein nanocrystal samples to aid in structure-based discovery efforts of therapeutic targets that are difficult to crystallize.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

High-throughput computational framework for high-order anharmonic thermal transport in cubic and tetragonal crystals

Accurate first-principles prediction of lattice thermal conductivity (κL) remains challenging in identifying materials with extreme thermal behavior. While the harmonic approximation with three-phonon scattering (HA + 3ph) is now routine, reliable κL prediction often requires higher-order anharmonic effects, including self-consistent phonon renormalization, three- and four-phonon scattering, and off-diagonal heat flux (SCPH + 3, 4ph + OD). We present a state-of-the-art high-throughput workflow that unifies these effects and apply it to 773 cubic and tetragonal crystals spanning diverse chemistries and structures. From 562 dynamically stable compounds, we assess the hierarchical impacts of higher-order anharmonicity. For around 60% of materials, HA + 3ph predictions closely match those from SCPH + 3, 4ph + OD. SCPH generally increases κ L , by over 8 times in extreme cases, whereas four-phonon scattering universally suppresses κ L , sometimes to 15% of the HA + 3ph value. Off-diagonal contributions are negligible in high-κ L systems but can rival diagonal terms in highly anharmonic low-κ L compounds. We highlight four case studies, Rb 2 TlAlH 6 , Cu 3 VSe 4 , CuBr, and KTlCl 4 , that exhibit distinct extreme behaviors. This work delivers not only a robust workflow for high-fidelity κL dataset but also a quantitative framework to determine when higher-order effects are essential. The hierarchy of κ L results, from the HA + 3ph to SCPH + 3, 4ph + OD level, offers a scalable, interpretable route to discovering next-generation extreme thermal materials.

36 MATERIALS SCIENCE↗
DOE OSTI2022

High thermal conductivity in wafer-scale cubic silicon carbide crystals

High thermal conductivity electronic materials are critical components for high-performance electronic and photonic devices as both active functional materials and thermal management materials. We report an isotropic high thermal conductivity exceeding 500 W m –1 K –1 at room temperature in high-quality wafer-scale cubic silicon carbide (3C-SiC) crystals, which is the second highest among large crystals (only surpassed by diamond). Furthermore, the corresponding 3C-SiC thin films are found to have record-high in-plane and cross-plane thermal conductivity, even higher than diamond thin films with equivalent thicknesses. Our results resolve a long-standing puzzle that the literature values of thermal conductivity for 3C-SiC are lower than the structurally more complex 6H-SiC. We show that the observed high thermal conductivity in this work arises from the high purity and high crystal quality of 3C-SiC crystals which avoids the exceptionally strong defect-phonon scatterings. Moreover, 3C-SiC is a SiC polytype which can be epitaxially grown on Si. We show that the measured 3C-SiC-Si thermal boundary conductance is among the highest for semiconductor interfaces. These findings provide insights for fundamental phonon transport mechanisms, and suggest that 3C-SiC is an excellent wide-bandgap semiconductor for applications of next-generation power electronics as both active components and substrates.

42 ENGINEERING↗