Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “bundle protocol”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

82 records · Page 5

Ambient Large-Scale Template-Mediated Synthesis of High-Aspect Ratio Single-Crystalline, Chemically Doped Rare-Earth Phosphate Nanowires for Bioimaging

A simple and effective template-mediated protocol has been developed for the large-scale, room-temperature preparation of high-aspect-ratio, single-crystalline Tb-doped CePO{sub 4} nanowires, measuring {approx}12 nm in diameter and over 10 {mu}m in length. Moreover, we also isolated sheaf-like bundles of nanostructures. The synthesis mechanism likely involved a crystal splitting step. The resulting nanowires demonstrated an intense redox-sensitive green photoluminescence, which was exploited, in addition to their inherently high biocompatibility and low toxicity, for potential applications in biological imaging and labeling of cells.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Zapiary: Creating Visibility in IOT Networks

Zigbee and Z-Wave are the main networking protocols used by low-power Internet of Things (IOT) devices. These protocols use low frequencies. Mesh architecture, and unique address formats that make them not compatible with traditional network traffic tools like IX-Discovery Tools. Zapiary is a software that takes CSV files with Zigbee and Z-Wave traffic and generates Structured Threat Information eXpression (STIX) JSON bundles illustrating the communication within IOT networks. The bundles can then be viewed within Structured Threat Intelligence Graph (STIG) or used with AI/ML models to provide deeper visibility into nodes that make up the network and the ability to trend the mesh network over time.

24 POWER TRANSMISSION AND DISTRIBUTION↗

Operating CFDP in the Interplanetary Internet

This paper examines the design elements of CCSDS File Delivery Protocol and Interplanetary Internet technologies that will simplify their integration and discusses the resulting new capabilities, such as efficient transmission of large files via multiple relay satellites operating in parallel.

CFDP IPN bundling↗

Disruption Tolerant Networking Flight Validation Experiment on NASA's EPOXI Mission

In October and November of 2008, the Jet Propulsion Laboratory installed and tested essential elements of Delay/Disruption Tolerant Networking (DTN) technology on the Deep Impact spacecraft. This experiment, called Deep Impact Network Experiment (DINET), was performed in close cooperation with the EPOXI project which has responsibility for the spacecraft. During DINET some 300 images were transmitted from the JPL nodes to the spacecraft. Then they were automatically forwarded from the spacecraft back to the JPL nodes, exercising DTN's bundle origination, transmission, acquisition, dynamic route computation, congestion control, prioritization, custody transfer, and automatic retransmission procedures, both on the spacecraft and on the ground, over a period of 27 days. All transmitted bundles were successfully received, without corruption. The DINET experiment demonstrated DTN readiness for operational use in space missions. This activity was part of a larger NASA space DTN development program to mature DTN to flight readiness for a wide variety of mission types by the end of 2011. This paper describes the DTN protocols, the flight demo implementation, validation metrics which were created for the experiment, and validation results.

DTN↗

BPTAP: A New Approach to IP over DTN

Traditional Internet protocols have been widely deployed for a variety of applications. However such protocols generally perform poorly in situations in which, round trip delays are very large (interplanetary distances) or . persistent connectivity is not always available (widely dispersed MANET). Delay/Disruption Tolerant Network (DTN) technology was invented to address these issues: (1) . Relay nodes "take custody" of blocks of network traffic on a hop-by -hop basis and retransmit them in cases of expected or unexpected link outage (2) Bundle lifetime may be configured for long round trip light times. BPTAP is novel by encapsulating Ethernet frames in BP

space links↗

Extending the Licklider Transmission Protocol to Multi-Band Links

Most deep space missions return data to Earth using links operating at a single frequency band. Indeed, their data requirements are low enough that bandwidth regulations do not constrain the system. In contrast, spacecraft such as Kepler or Europa Clipper are transitioning to a new operational paradigm where engineering and science data are transmitted through simultaneous links operating at different frequency bands (henceforth termed multi-band links). This ensures, for instance, that critical data is correctly received using a well characterized X-band link, while science data at a much larger data rate can be returned efficiently (both in terms of bandwidth and energy) through a Ka-band link.Having a spacecraft establish two simultaneous links with a ground station opens a large span of potential improvements for space communications and mission operations. In this paper, we consider the problem of running a Licklider Transmission Protocol (LTP) session over a multi-band link. LTP is an implementation of a selective Automatic Repeat reQuest (ARQ) protocol, i.e. it ensures correct delivery of data over an error prone link with potentially long propagation delays. To maximize its efficiency in deep space environments, LTP operates in deferred-ACK mode and is typically included as one of the core protocols in the Delay Tolerant Networking (DTN) suite.The contributions of this paper are as follows: First, we propose an extension to LTP for multi-band links (denoted MBLTP) and sketch how it can be implemented without modifying the current definition of LTP data units. Next, we develop bounds on the performance of MBLTP when transmitting a single data file over a multi-band link. Three metrics are considered, file expected delivery time, total energy spent and bundle jitter. The results of the analytic model are first benchmarked against simulations to ensure validity, and then compared against the performance of both traditional LTP and Parallel LTP (PLTP).We demonstrate that MBLTP can significantly reduce the latency and jitter with which data products are delivered to destination over a deep space link compared to LTP at moderate energy cost. Similarly, we also demonstrate that MBLTP outperforms PLTP in all considered metrics.

Sanchez Net, Marc↗

High-Rate Delay Tolerant Networking (HDTN) Software Requirements Analysis

This document serves as a detailed analysis of the main networking protocols implemented by HDTN. Sources of the protocol specifications include Internet Engineering Task Force (IETF) Request for Comments (RFC) and Consultative Committee for Space Data Systems (CCSDS) standards. The focus of this report is to derive software requirements suitable for NASA Procedural Requirements 7150.2D Class B compliance, including requirements traceability and software verification and validation, from the source specifications. This analysis will be incorporated into the finalized HDTN Software Requirements Specification (SRS) but does not encompass the full scope of the HDTN SRS. Requirements in this document are considered draft. The complete requirements will include bundle application requirements, interface requirements, computer resource requirements, software quality factors, and additional requirements as determined by the project. This document is publicly released to the greater community to receive feedback and foster collaboration opportunities.

Rachel Dudukovich↗

OpenStudio®-MCP [SWR-26-035]

OpenStudio®-MCP is a Model Context Protocol (MCP) server that lets AI assistants perform building energy modeling through natural language. Rather than requiring users to learn the OpenStudio® SDK, EnergyPlus® scripting, or Ruby/Python automation, the server translates conversational requests into sequences of tool calls that create models, design HVAC systems, run simulations, and extract results — all within a single chat session. The server's 124 tools are organized into a skills architecture where each skill encapsulates a domain of building energy modeling (envelope, HVAC, loads, weather, simulation, results) behind typed, LLM-friendly interfaces. High-leverage operations like applying ASHRAE 90.1 baseline systems or generating standards-compliant typical buildings are exposed as single tool calls that internally wire dozens of OpenStudio® objects. Bundled measures from ComStock™ and Openstudio® -common-measures-gem are wrapped with dedicated tools and typed arguments rather than exposed through a generic measure interface, so AI models get consistent, error-resistant recipes without needing to discover measure arguments at runtime. A key design decision is structured results extraction: six SQL-based tools return surgical ~300–1,000 token responses (end-use breakdowns, envelope summaries, HVAC sizing, timeseries data) instead of requiring the AI to parse ~100K-token raw HTML reports, making iterative design exploration practical within context window limits. The codebase is designed as a reference implementation — explicit, well-commented, and modular — so that other simulation engines (EnergyPlus® standalone, TRNSYS, DOE-2) can use it as a template for building their own MCP servers.

Ball, Brian [National Laboratory of the Rockies (N↗

Heterojunction Architecture of N‐Doped WO 3 Nanobundles with Ce 2 S 3 Nanodots Hybridized on a Carbon Textile Enables a Highly Efficient Flexible Photocatalyst

Abstract The availability of robust, versatile, and efficient photocatalysts is the main bottleneck in practical applications of photocatalytic degradation of organic pollutants. Herein, N‐WO 3 /Ce 2 S 3 nanotube bundles (NBs) are synthesized and successfully immobilized on a carbon textile, resulting in a flexible and conducting photocatalyst. Due to the large interfacial area between N‐WO 3 and Ce 2 S 3 , the interwoven 3D carbon architecture and, more importantly, the establishment of a heterojunction between N‐WO 3 and Ce 2 S 3 , the resultant photocatalyst exhibits excellent light absorption capacity and superior ability to separate photoinduced electron–hole pairs for the photocatalytic degradation of organic compounds in air and water media. Theoretical calculations confirm that the strong electronic interaction between N‐WO 3 and Ce 2 S 3 can be beneficial to the enhancement of the charge carrier transfer dynamics of the as‐prepared photocatalyst. This work provides a new protocol for constructing efficient flexible photocatalysts for application in environmental remediation.

Huang, Yongchao↗

Comparison of NMR and crystal structures for the proteins TM1112 and TM1367

The NMR structures of the TM1112 and TM1367 proteins from Thermotoga maritima in solution at 298 K were determined following a new protocol which uses the software package UNIO for extensive automation. The results obtained with this novel procedure were evaluated by comparison with the crystal structures solved by the JCSG at 100 K to 1.83 and 1.90 Å resolution, respectively. In addition, the TM1112 solution structure was compared with an NMR structure solved by the NESG using a conventional largely interactive methodology. For both proteins, the newly determined NMR structure could be superimposed with the crystal structure with r.m.s.d. values of <1.0 Å for the backbone heavy atoms, which provided a starting platform to investigate local structure variations, which may arise from either the methods used or from the different chemical environments in solution and in the crystal. Thereby, these comparative studies were further explored with the use of reference NMR and crystal structures, which were computed using the NMR software with input of upper-limit distance constraints derived from the molecular models that represent the results of structure determination by NMR and by X-ray diffraction, respectively. The results thus obtained show that NMR structure calculations with the new automated UNIO software used by the JCSG compare favorably with those from a more labor-intensive and time-intensive interactive procedure. An intriguing observation is that the ‘bundles’ of two TM1112 or three TM1367 molecules in the asymmetric unit of the crystal structures mimic the behavior of the bundles of 20 conformers used to represent the NMR solution structures when comparing global r.m.s.d. values calculated either for the polypeptide backbone, the core residues with solvent accessibility below 15% or all heavy atoms.

59 BASIC BIOLOGICAL SCIENCES↗