Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “TRIBOLOGY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5

Tribological properties of nanosized calcium carbonate filled polyamide 66 nanocomposites

For the purpose of developing high performance tribomaterials for mechanical sliding parts such as gears, bearings and so on, nanosized calcium carbonate (nano-CaCO{sub 3}) filled polyamide 66 (PA66) nanocomposites were investigated. The nano-CaCO{sub 3} was a kind of precipitated (colloid typed) CaCO{sub 3}, and its average particle size was 40, 80 and 150 nm. Surface treatment was performed by fatty acid on the nano-CaCO{sub 3} and its volume fraction in the nanocomposite was varied from 1 to 20vol.%. These nanocomposites were melt-mixed by a twin screw extruder and injection-molded. Tribological properties were measured by two types of sliding wear testers such as ring-on-plate type and ball-on-plate type one under dry condition. The counterface, worn surface and wear debris were observed by digital microscope and scanning electron microscope. It was found that the nano-CaCO{sub 3} has a good effect on the tribological properties, although the effect on the frictional coefficient and specific wear rate is differed by the volume fraction and the type of sliding wear modes. This is attributed to the change of wear mechanisms, which is the change of form of the transfer films on the counterface and the size of wear debris. It follows from these results that PA66/nano-CaCO{sub 3} nanocomposites may be possible to be the high performance tribomaterials.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Mechanical and tribological property comparison of melt-compounded nanocomposites of atomic-layer-deposition-coated polyamide particles and commercial nanofillers

Mechanical and tribological properties of melt-compounded titanium dioxide nanocomposites of atomic-layer-deposition (ALD)-coated polyamide particles and commercial nanofillers were compared. The nanofiller dispersion in the polyamide matrix was studied using transmission electron microscopy showing very different morphology for the ALD-created and the traditional nanocomposites: former appearing as ribbons in the matrix whereas latter composing from spherical clusters. The effect of such morphology change on the specimen's mechanical response subjected to tensile and impact loading was investigated. The results demonstrated that ALD-created nanocomposites possess significantly higher Young's modulus than pure and traditionally filled polyamide matrix. However, transition from ductile to brittle behavior occurs especially for the ALD-created nanocomposites. Notched impact strength experiments supported this, suggesting that the impact strength of ALD-created composites decreased significantly compared to pure polyamide matrix, whereas traditionally melt-compounded nanocomposites showed no significant changes. Furthermore, the tribological properties of the selected specimens were determined and the effect of the nanofiller on the friction and scratching properties of the polyamide matrix is discussed.

36 MATERIALS SCIENCE↗

Tribology in the 80's. Volume 2: Sessions 5 - 8

This 4-day international conference, held at NASA Lewis Research Center on April 18-21, 1983, was the result of an effort by the Structures and Mechanical Technologies Division at Lewis. Thirty-six invited presentations were made relative to the advancement of various disciplines and subdisciplines in the field of tribology (lubrication). These included papers on the status of understanding on each of the eight session topics, as well as the current state-of-knowledge and directions to be taken for the remainder of the decade. A wide range of subjects was covered that extended from fundamental research with tribological materials of all kinds and their surface effects up to the final technology applications in bearings, gears, and seals. The papers and the ensuing invited and spontaneous discussions on them by the participants are reported herein.

Tribology↗

Braycote™ Grease retains tribological properties for 17 years in controlled storage

Braycote™ greases that are in mechanisms in controlled storage retain their tribological properties for an extended period of time. Testing on aged and separated Braycote™ grease obtained from several sources showed no detrimental effect on lubricity. Additionally, Thermal Gravimetric Analysis testing demonstrated no significant decrease in performance due to static, controlled storage. Tribological action, heat, or other forces are required to effect the performance of Braycote™ grease.

Braycote™ Grease↗

Radiation-Conditioned Ti–hBN Coatings for Space Mechanisms: Bridging Tribology and Irradiation Effects from Laboratory to Low-Earth Orbit

The longevity of tribological components in extraterrestrial environments is challenged by abrasive regolith, extreme temperatures, and ionizing radiation. This study evaluates the performance of vacuum plasma sprayed (VPS) Ti-2vol.% hexagonal boron nitride (hBN) coatings applied to joint mechanisms such as rod and slot, ball and socket, and hinge assemblies, fabricated from Al6061 and Ti6Al4V for planetary structures. Coated and uncoated samples were tested under vacuum with lunar regolith simulant (JSC-1A), followed by environmental exposures including electron radiation and thermal cycling. Results show that coated samples consistently outperformed uncoated counterparts across all configurations. Wear depth in coated components was reduced by over 80%, as confirmed by 3D profilometry and surface imaging. SEM analysis revealed severe abrasion and localized plastic deformation in uncoated surfaces, while coated samples retained structural integrity due to synergy of hard protective phases formed during deposition and retained hBN providing solid lubrication in the sliding surface. Coated and exposed samples exhibited smoother actuation profiles and reduced friction, indicating a beneficial "conditioning" effect from environmental exposure. The coatings-maintained performance even on complex geometries with minimal delamination. These findings demonstrate the potential of VPS Ti-hBN coatings to extend the operational life of lunar mechanisms, bridging laboratory-scale tribology with flight-relevant mechanical applications.

tribology↗

CHARACTERIZATION AND TRIBOLOGICAL EVALUATION OF 1-BENZYL-3-METHYLIMIDAZOLIUM BIS(TRIFLUOROMETHYLSULFONYL)IMIDE AS NEAT LUBRICANT AND OIL ADDITIVE

Selected physical and chemical properties and tribological data for a newly-developed, imidazolium-based ionic liquid (IL) are presented. The IL is soluble in the SAE 5W-30 oil up to a certain weight percentage, and is as a promising candidate for use in lubrication applications, either in its neat version or as an oil additive. Characterization of the IL included dynamic viscosity at different temperatures, corrosion effects on cast iron cylinder liners, and thermal stability analysis. The tribological performance was evaluated using a reciprocating ring-on-liner test arrangement. When used in neat version this IL demonstrated friction coefficient comparable to a fully formulated engine oil, and when used as an oil additive it produced less wear.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Effect of Oxide Additives on Phase Evolution and Tribological Behavior of Zirconia-Toughened Alumina Composite

Four different zirconia-toughened alumina added with different pairs of oxides (CeO{sub 2}, TiO{sub 2}, CuO, ZnO and SnO{sub 2}) were prepared through the co-precipitation technique. Conventional sintering resulted in relative densities ≥96%. Phase analyses of these composites were performed by x-ray diffraction. Vicker’s hardness and tribological behavior of all ZTA composites were studied. Microstructure analysis of polished and worn surfaces was carried out to understand and correlate the mechanical/tribological behavior with the microstructure. A different wear mechanism is observed in ZTA containing CeO{sub 2} and TiO{sub 2} which resulted in considerable improvement in tribological behavior with a minimum specific wear rate of 9 × 10{sup −7} mm{sup 3}/Nm.

36 MATERIALS SCIENCE↗

Tribological Characterization of SiC and B{sub 4}C Manufactured by Plasma Pressure Compaction

The objective of the present study was to assess the tribological properties and the wear behavior of silicon carbide and boron carbide ceramics, produced by the plasma pressure compaction sintering process. Reciprocating sliding tests were executed to evaluate the tribological behavior of silicon carbide and boron carbide. Samples of each material with distinct values of surface roughness Ra were tested. Wear mass loss, coefficients of friction and wear mechanism of the boron carbide and silicon carbide were evaluated by means of microscopes and an energy-dispersive spectroscopy probe. The coefficient of friction of the evaluated boron carbide was found to be 0.8, and the surface roughness affects only the starting transient, while for silicon carbide the steady-state value ranges from 0.5 to 0.8 depending on the roughness value Ra.

36 MATERIALS SCIENCE↗

Effect of MoSi{sub 2} Content on Dry Sliding Tribological Properties of Zr-Based Bulk Metallic Glass Composites

Zr{sub 55}Cu{sub 30}Al{sub 10}Ni{sub 5} bulk metallic glass and its composites were prepared by suction casting into a copper mold. The effect of MoSi{sub 2} content on the tribological behavior of Zr{sub 55}Cu{sub 30}Al{sub 10}Ni{sub 5} BMG was studied by using a high-speed reciprocating friction and wear tester. The results indicate that the friction coefficient and wear resistance of the BMGs can be improved by a certain amount of crystalline phase induced by MoSi{sub 2} content from 1 to 3% and deteriorated with MoSi{sub 2} content of 4%. The wear mechanism of both the metallic glass and its composite is abrasive wear. The mechanism of crystalline phase-dependent tribological properties of the composite was discussed based on the wear track and mechanical properties in the present work. The wear behavior of Zr{sub 55}Cu{sub 30}Al{sub 10}Ni{sub 5} BMG and its composite indicates that a good combination of the toughness and the hardness can make the composite be well wear resistant.

36 MATERIALS SCIENCE↗

Tribological Properties of NiAl Matrix Composites Filled with Serpentine Powders

The unexplored tribological properties of NiAl matrix composites filled with serpentine powders are investigated using a reciprocating ball-on-disk configuration. Tribological test results reveal that increasing the serpentine concentration to some extent reduces the friction coefficients and wear rates of the composites. The best anti-friction and anti-wear performance is displayed by the NiAl matrix composite filled with 8 wt.% serpentine and 2 wt.% TiC (NAST). Microstructural analyses demonstrate that after adding serpentine, the self-lubricating films with different percentages of coverage form on the worn surfaces of the composites. A self-lubricating film with the highest percentage of coverage smears on the worn surface of NAST. This clearly suggests that serpentine can act as a new type of filler for NiAl matrix composites, whereas a combination of serpentine and TiC can enable serpentine to provide a full play to its excellent lubricating performance.

36 MATERIALS SCIENCE↗

Study of Tribological Characteristics of Multi-pass SMAW Armox 500T Steel Joints

Study of tribological characteristics of multi-pass shielding metal arc-welded (SMAW) Armox 500T steel joints in comparison with its counterpart base metal was carried out. Series of dry sliding wear tests were carried out as a function of applied loads ranging from 30 to 120 N and sliding distances from 1000 to 6000 m at a constant sliding velocity using pin-on-disk tribometer. It was observed that specific wear rate and lost volume in SMAW joints significantly high compared to Armox 500T base metal in the range of loads and sliding distances considered in the present study. The scanning electron micrographs indicated that wear of Armox 500T base metal occurred due to micro-grooving and adhesion, on the other hand, micro-delamination was observed in SMAW joints. Microstructural investigations revealed that base metal exhibits superior tribological properties as compared to SMAW joints due to the formation of martensite lath in acicular form with coarse and fine precipitates.

36 MATERIALS SCIENCE↗

Dry-Sliding Tribological Properties of TiAl Alloys and Ti{sub 2}AlN/TiAl Composites at High Temperature

The dry-sliding tribological properties of TiAl alloy and its composite Ti{sub 2}AlN/TiAl were investigated comparatively in the temperature range of 25-800 °C. The wear test results showed the wear resistance of TiAl alloy and Ti{sub 2}AlN/TiAl composite from 25 to 400 °C was poor, but it improved obviously when temperature was above 600 °C. Also, 15 vol.% incorporation of Ti{sub 2}AlN particles was beneficial to improve the friction and wear properties of TiAl. Protective oxide layer generated on the wear surface of 15 vol.% Ti{sub 2}AlN/TiAl composite from 25 to 400 °C, hence, the wear resistance improved. Ti{sub 2}AlN particles played a load-carrying role and inhabited the delamination of enamel layer effectively when the temperature was above 800 °C. Overall, Ti{sub 2}AlN particles which acted as hard spots changed the state of wear surface and further provided a second phase strengthening effect, which resulted in the difference in tribological behaviors between TiAl alloy and its composite.

36 MATERIALS SCIENCE↗

Surface Modification of High-Carbon Steel Using Fiber Laser and Its Thermal, Microstructural and Tribological Analysis

In this study, surface modification of high-carbon steel was carried out using 2 kW fiber laser and thermal, microstructural and tribological characterizations were performed. The process parameters selected for laser surface treatment were laser power (600-1500 W) and scan speed (3000-4500 mm/min). Infrared pyrometer was used to record the surface temperature during the process. The metallographic analysis was carried out using an optical microscope to find the depth and width of the laser-treated zone. Scanning electron microscopy and energy-dispersive spectroscopy were performed to reveal the microstructure and compositional changes taking place in the laser-treated zone. It was observed that the dendritic growth took place from the top surface toward the center of the laser-treated zone. The amount of dendritic growth can be related to the maximum surface temperature generated during the process. XRD analysis indicated the formation of some intermetallic compounds and phase shifts taking place in the laser-treated zone. Residual stress analysis was performed to analyze the amount of stress accumulation in the laser-treated zone. When the temperature cycle was analyzed, it was found that the melting of the steel resulted in the formation of a surface under compressive stress while the non-melt hardened zone developed a surface under tensile stress. The maximum Vickers microhardness value achieved was about 958.8 HV{sub 0.5} for 1500 W power and 3000 mm/min scan speed. Scratch test was performed on the laser-treated track, and it was found that the hardened zone showed better tribological properties with respect to the parent material. Finally, it was observed that the surface roughness value increased with higher heat input probably due to high rate of oxide formation as well as due to the presence of martensite in the laser-treated zone.

36 MATERIALS SCIENCE↗

Tribological Properties and Self-Repairing Functionality of Ti6Al4V-Multilayer Graphene-Ag Composites

Ti6Al4V alloy has broad application prospects in the aircraft industry. However, when it is served as frictional motion components, the poor friction and wear properties may greatly influence the reliability and working life of the entire mechanical system. Therefore, this paper mainly investigates the tribological performance and self-repairing functionality of Ti6Al4V-multilayer graphene (MLG)-Ag composites (TMAC) from 25 to 600 °C. The results show that TMAC obtains better tribological behavior in comparison with Ti6Al4V alloy (TC4), Ti6Al4V-MLG composites (TMC) and Ti6Al4V-Ag composites (TAC). It should be ascribed to the synergistic action of the reinforcement MLG and lubricant Ag, which are crushed and spread out by mechanical and thermal stress in the friction process, leading to the formation of a lubricating film on the wear scar. Along with the spreading of lubricating film, Ag and MLG can precipitate onto the microdefective areas, thus playing an important role in repairing the wear scar of TMAC.

36 MATERIALS SCIENCE↗

Atomic Layer-Deposited Al{sub 2}O{sub 3} Interlayer for Improved Tribological and Anti-corrosion Properties of TiN Hard Coating on 316L Stainless Steel

A dense Al{sub 2}O{sub 3} interlayer was inserted into TiN to enhance the tribological and anti-corrosion properties of TiN hard coating via a hybrid process of magnetron sputtering and atomic layer deposition (ALD). The influence of the ALD-Al{sub 2}O{sub 3} layer on the microstructure, mechanical, tribological and anti-corrosion properties of TiN was examined. The TiN-Al{sub 2}O{sub 3} coating exhibits low friction coefficient and specific wear rate, due to the structure change and columnar refinement caused by the addition of amorphous ALD-Al{sub 2}O{sub 3} interlay which improves the mechanical properties of hard coating. The improved corrosion properties of TiN are attributed to the fact that the insulating ALD-Al{sub 2}O{sub 3} used as a sealing layer can prevent the corrosive chlorine ions migrating into the lower TiN layer and block the charge transport in coatings. Moreover, raising the insertion position of ALD-Al{sub 2}O{sub 3} layer away from the steel substrate results in a further increase in the anti-corrosion property of TiN-Al{sub 2}O{sub 3} composite coating.

36 MATERIALS SCIENCE↗

Effect of Cu nanoparticles on the tribological performance of polydopamine + polytetrafluoroethylene coatings in oil-lubricated condition

For this study, the effect of Cu nanoparticles (NPs) on the tribological performance of the thick polydopamine (PDA) + polytetrafluoroethylene (PTFE) coatings in DTE-32 Mobil lubricated condition was investigated. PDA + PTFE + Cu NP coatings with 45 µm thickness were spray-coated with 0.12, 0.25, and 0.50 wt% of Cu NPs in an aqueous PDA + PTFE solution, respectively. The mechanical properties were studied by PeakForce quantitative nanomechanical (PFQNM) characterization and nanoindentation. The Young's modulus increased, and the coefficient of friction (COF) reduced with the addition of Cu NPs compared to PDA + PTFE coating. The PDA + PTFE + 0.25 wt% Cu and PDA + PTFE + 0.50 wt% Cu coatings increased the durability by 52% and 33%, respectively, compared to the coating without Cu NPs. The better tribological performance of the nanocomposite coatings is contributed by the better mechanical properties, better adherence, and enhanced cross-linking between the constituents of the nanocomposite coatings due to the presence of Cu NPs. The addition of 0.25 wt% Cu NPs in PDA + PTFE increased the thermal conductivity by 12%.

36 MATERIALS SCIENCE↗

Effect of 4 wt.% Cr on microstructure, corrosion resistance and tribological properties of Fe{sub 3}Al–20 wt.%Al{sub 2}O{sub 3} composites

Fe{sub 3}Al–20 wt.%Al{sub 2}O{sub 3} ultrafine grained composites with 4 wt.% Cr were prepared by mechanical alloying inducing self propagating high temperature synthesis with subsequent plasma activated sintering. Microstructures of the composites were studied by X-ray diffraction, scanning electron microscopy, energy dispersive spectrum and transmission electron microscope. Then the relative density, room temperature hardness, static corrosion resistance and dry sliding wear behavior at a temperature range of 25 °C–800 °C of the sintered samples were tested and analyzed. The results showed that the composites had high hardness and a good microstructure with fine grain size, high relative density. The composites with 4 wt.% Cr amount also exhibited excellent comprehensive tribological properties at medium–high temperatures especially at a temperature above 500 °C, although the wear resistance did not be improved at 25 °C–500 °C. 4 wt.% Cr element addition improved the corrosion resistance of the composites significantly with the corrosion loss decreasing by 19.48%. - Highlights: ► In-situ Fe{sub 3}Al–20 wt.%Al{sub 2}O{sub 3} composites with 4 wt.% Cr was prepared by MA-PAS. ► Composites had good tribological properties at the temperature above 500 °C. ► Corrosion resistance was improved obviously by 4 wt.% Cr amount.

36 MATERIALS SCIENCE↗

Influence of vanadium incorporation on the microstructure, mechanical and tribological properties of Nb–V–Si–N films deposited by reactive magnetron sputtering

Composite Nb–V–Si–N films with various V contents (3.7–13.2 at.%) were deposited by reactive magnetron sputtering and the effects of V content on the microstructure, mechanical and tribological properties of Nb–V–Si–N films were investigated. The results revealed that a three-phase structure, consisting of face-centered cubic (fcc) Nb–V–Si–N, hexagonal close-packed (hcp) Nb–V–Si–N and amorphous Si{sub 3}N{sub 4}, co-exists in the Nb–V–Si–N films and the cubic phase is dominant. The hardness and critical load (L{sub c}) of Nb–V–Si–N films initially increased gradually and reached a summit, then decreased with the increasing V content in the films and the maximum values were 35 GPa and 9.8 N, respectively, at 6.4 at.% V. The combination of V into Nb–Si–N film led to the fracture toughness linearly increasing from 1.11 MPa·m{sup 1/2} at 3.7 at.% V to 1.67 MPa·m{sup 1/2} at 13.2 at.% V. At room temperature (RT), the average friction coefficient decreased from 0.80 at 3.7 at.% V to 0.55 at 13.2 at.% V for the Nb–V–Si–N films. The wear rate of Nb–V–Si–N films initially decreased and then increased after reaching a minimum value of about 6.35 × 10{sup −} {sup 7} mm{sup 3}/N·mm at 6.4 at.% V. As the rise of testing temperature from 200 °C to 600 °C, the average friction coefficient of Nb–V–Si–N films decreased with the increase of the testing temperature regardless of V content. However, the wear rate gradually increased for all films. The average friction coefficient and wear rate at RT and elevated temperatures were mainly influenced by the vanadium oxides with weakly bonded lattice planes. - Highlight: • Fcc-Nb–V–Si–N, hcp-Nb–V–Si–N and amorphous Si{sub 3}N{sub 4} co-existed in the films. • The amount of Si{sub 3}N{sub 4} decreased with increasing V content in the films. • Hardness of Nb–V–Si–N film (6.4 at.%) reached a maximum value of 35 GPa. • Addition of V led to the increase of fracture toughness. • Tribological properties were influenced by lubricant wear debris.

36 MATERIALS SCIENCE↗