Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Selective wetting”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Radiation Stability of MOF Engineered Particles

Pacific Northwest National Laboratory (PNNL), in collaboration with Flibe Energy, demonstrated the fabrication of metal organic frameworks (MOFs) into engineered beads to manage off-gases released from advanced reactors, including molten salt reactors. Based on the commercial availability and easy to synthesis at scale, PNNL down-selected two MOF sorbents known as CuBTC and UiO-67. The sorbents were synthesized, characterized, and fabricated into mechanically robust engineered beads (composites) using wet granulation method using polymer as a binder. Further, MOF powders and and mechanically robust composites were exposed to gamma radiation using Co-60 source and characterized irradiated MOFs to demonstrate the structural stability. Among the two MOF sorbents identified, the CuBTC MOF was shown to be very promising for noble gas management at low temperature (193 K) compared to UiO-67 MOF. The high adsorption capacity of the synthesized composites was correlated to the high surface area and pore volume of the CuBTC MOF. Both MOFs retain structural integrity and long-range order even after exposure to 1000 kGy of radiation.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2020

Gold Catalysts Synthesized Using a Modified Incipient Wetness Impregnation Method for Propylene Epoxidation

Propylene epoxidation in the presence of oxygen and hydrogen were measured for a series of Au/TS-1 catalysts prepared by a modified incipient wetness impregnation (mIWI) method. This method enables precise control of the Au : Ti ratio in the Au/TS-1 catalysts. The optimized Au/TS-1 catalyst exhibited 12 % propylene conversion, 87 % PO selectivity, and 25 % hydrogen efficiency. The particle size of gold nanoparticles prepared by the modified IWI was between 2 and 3 nm, as demonstrated by XRD patterns, STEM images, and X-ray absorption spectroscopy at the Au L(3)edge. XPS spectra showed that the surface species on the catalysts were similar. UV-Vis spectra suggested that in the modified IWI method, the chlorine ligands in Au(Cl)(4)(-)were replaced by hydroxyl groups, which contributes to form small gold nanoparticles. Kinetic studies showed that the active sites of Au(mIWI)/TS-1 are similar to the Au(DP)/TS-1 prepared by deposition precipitation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Effect of Acid Etching Time in Ti 3 C 2 MXene’s Interlayer Spacing and Conductivity

Materials with sheet-like morphologies often form interconnected networks of layers or flakes, offering continuous channels for electron and ion transport in electrochemical energy storage applications. One such material is the recently discovered class of 2-D transition metal carbides/nitrides, called MXene, whose general formula is M n+1 X n T x (where M = transition metal; n = 1, 2, or 3; X = carbon or nitrogen; and T x = termination group such as –F, –OH, and/or =O). Ti 3 C 2 , one of the most studied MXene, can be synthesized by selectively etching the aluminum layer in Ti 3 AlC 2 (also called MAX phase). The most straightforward technique to exfoliate this layer is by wet-chemical etching with high-concentration hydrofluoric acid (HF). In this study, the effect of etching time on the morphology, interlayer spacing, and electrical conductivity of the resultant MXene was studied.

25 ENERGY STORAGE↗
DOE OSTI2020

Diffuser Braze Development

At the request of SRTE, through the PDRD project, SRNL is developing a vacuum brazing process to facilitate the fabrication of hydrogen purification systems. In particular, this effort is directed at tube-style hydrogen diffusers. The diffusers are comprised of numerous palladium-silver tubes that are brazed to a nickel fitting, which is subsequently welded to a stainless steel tube, fitting, or tube sheet. Historically, torch brazing has been used as a heat source; for this work vacuum furnace brazing was suggested to improve the uniformity of the process. This report describes the braze process development for braze selection and simple nickel fitting to tube brazing. Five braze alloys were selected and sessile drop testing was conducted over a range of temperatures from 25 to 75° C over the liquidus temperature. Samples were characterized for wetting angle, erosion, and brazability. The cup-to-tube braze joints were inspected using digital radiography, ultrasonic testing, and metallographic examination. Two of the five alloys exhibited excellent fabrication properties and are considered for further development.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Nanopinhole Passivating Contact Si Solar Cells Fabricated with Metal-Assisted Chemical Etching

Monocrystalline Si (c-Si) solar cells with passivating contacts based on doped polycrystalline Si (poly-Si) on ≈2.0 nm silicon oxide (SiO x ) require >1000 °C thermal processing to create conducting pinholes in the SiO x layer. However, this high thermal budget can induce bulk defects in the Czochralski c-Si wafers used as the cell absorber layer. We demonstrate that pinholes can instead be created using metal-assisted chemical etching on planar or textured morphologies, at room temperature. This wet process creates up to 200 nm wide conducting pinholes that are directly observed with transmission electron and atomic force microscopies. High-performance hole-selective poly-Si/SiN y /SiO x and electron-selective poly-Si/SiO x passivating contacts are fabricated and implemented in laboratory-scale solar cells. This process development significantly broadens the range of passivation layer materials, their thicknesses, and surface morphologies, which enables the design of poly-Si contacts with superior passivating quality.

14 SOLAR ENERGY↗
DOE OSTI2021

The Creation of True Two-Dimensional Silicon Carbide

This paper reports the successful synthesis of true two-dimensional silicon carbide using a top-down synthesis approach. Theoretical studies have predicted that 2D SiC has a stable planar structure and is a direct band gap semiconducting material. Experimentally, however, the growth of 2D SiC has challenged scientists for decades because bulk silicon carbide is not a van der Waals layered material. Adjacent atoms of SiC bond together via covalent sp3 hybridization, which is much stronger than van der Waals bonding in layered materials. Additionally, bulk SiC exists in more than 250 polytypes, further complicating the synthesis process, and making the selection of the SiC precursor polytype extremely important. This work demonstrates, for the first time, the successful isolation of 2D SiC from hexagonal SiC via a wet exfoliation method. Unlike many other 2D materials such as silicene that suffer from environmental instability, the created 2D SiC nanosheets are environmentally stable, and show no sign of degradation. 2D SiC also shows interesting Raman behavior, different from that of the bulk SiC. Our results suggest a strong correlation between the thickness of the nanosheets and the intensity of the longitudinal optical (LO) Raman mode. Furthermore, the created 2D SiC shows visible-light emission, indicating its potential applications for light-emitting devices and integrated microelectronics circuits. We anticipate that this work will cause disruptive impact across various technological fields, ranging from optoelectronics and spintronics to electronics and energy applications.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2021

Land management effects on wet aggregate stability and carbon content

Land management affects soil structure and many other soil properties and processes. Our objectives were to evaluate soil organic C (SOC), aggregate size distribution, aggregate-associated C, and soil structure as affected by long-term land management and slope. A chronosequence of 38 on-farm sites with low to high (5–18%) slopes was selected to evaluate 5–40 yr of management. The sites were classified as business as usual (BAU) cropland (BAU-Crop), BAU pasture (BAU-Past), newly established conservation reserve program (CRP) areas (CRP-New), and established CRP (CRP-Old). Soil samples were collected from the 0-to-5- and 5-to-15-cm depth increments and processed for soil property measurements including fractionation by wet sieving into five aggregate size classes (>2,000, 1,000–2,000, 500–1,000, 250–500, and 53–250 μm). Within the surface 5 cm, mean weight diameter (MWD) and geometric mean diameter (GMD) were used to characterize soil structural stability. The BAU-Past and CRP-Old sites had 79% more macroaggregates (>2,000, 1,000–2,000, and 500–1,000 μm), 123% higher MWD, 38% higher GMD, and 47% higher SOC than BAU-Crop or CRP-New sites. The 5-to-15-cm depth increment showed a similar but lower magnitude response. Aggregate-associated C was quantified using a constant soil mass that reflected aggregate size distribution to prevent overestimating C content. Lower-slope locations had more SOC, more macroaggregates, more C associated with macroaggregates, and higher GMD and MWD compared with high-slope locations across all management classifications and soil depths. The results support our hypothesis that the high-slop soils may benefits from specific management decisions than the lower-sloping soils as a function of landscape property. We recommend reestablishing grassland on sloping land that is susceptible to excessive soil erosion, although those practices will likely take a long time to restore soil structural stability and SOC content to precultivation levels.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2026

Thermokinetic mixing compounding for polymer composites – a comprehensive review

High-speed thermokinetic mixers (K-mixers) represent an advanced compounding technology that employs intense shear and friction to convert kinetic energy directly into thermal energy. This mechanism enables rapid mixing cycles, often under one minute, facilitating exceptional filler dispersion while minimizing the material’s thermal history. This is particularly effective for compounding challenging materials, including heat-sensitive biopolymers, wet filler feedstocks, and nanofillers prone to agglomeration. As the first comprehensive review of this technology, this article synthesizes the fundamental principles of thermokinetic mixing (K-mixing) and surveys recent advances in polymer composite fabrication. We contrast the working principles of K-mixers with conventional twin-screw extrusion, highlighting distinct advantages in dispersing nanoscale fillers, exfoliating layered materials, and processing wet cellulosic feedstocks and ultra-high filler loadings (e.g., 85 wt%). Furthermore, strategies to optimize filler–matrix interfacial bonding under rapid-processing constraints, such as the kinetic selection of compatibilizers and fiber surface treatments, are evaluated. Finally, we analyze key structure-processing-property relationships and outline future directions in scaling up, reactive processing, and hybrid material development.

Zhang, Xuefeng [University of Maine]↗
DOE OSTI2022

Quantifying Moss Response to Metal Contaminant Exposure Using Laser-Induced Fluorescence

Tracing sources of contamination, including potentially toxic elements (PTEs), has historically been achieved through sampling and analysis of soil or biota, which are labor-intensive, costly, and destructive methods. Thus, availability of a non-destructive in situ remote sensing method for monitoring metals deposited in biota is of great interest. Laser-induced fluorescence (LIF) is an emerging spectroscopic and imaging technique that documents changes in molecular energy level in plants as a biological response to metal contamination. For a proof-of-concept study and preliminary experiment, moss was selected for experimentation due to its long history of use in tracing atmospheric deposition of PTEs. Consecutive treatments of copper chloride (CuCl2) were administered to three moss samples, simulating wet deposition every 48 h over 10 days until reaching cumulative Cu concentrations of 2.690 to 8.075 μmol/cm2. While these Cu amounts are above environmentally relevant concentrations, they allowed the best conditions for testing and fine tuning of the imaging and data processing protocols presented in this paper. Moss fluorescence was induced using both 532 nm green and 355 nm UV lasers. A CMOS camera captured images of the LIF response, and red–green–blue (RGB) decimal code values were extracted for each pixel in the images, and pixel densities of color channels from treated and untreated moss samples were compared. Results show a shift towards lower color decimal codes corresponding to increased Cu concentration. We developed and contrasted multiple quantitative analyses of color distributions and demonstrated that LIF shows great promise for remote sensing of Cu accumulation in moss at μmol/cm2 levels. Though currently, the method would be limited to highly toxic sites, it illustrates the possibility and provides a framework for development of higher-sensitivity methods to detect nmol/cm2 that are viable for urban contamination level monitoring.

63 RADIATION, THERMAL, AND OTHER ENVIRON. POLLUTAN↗
DOE OSTI2021

Effective Dielectric Passivation Scheme in Area-Selective Front/Back Poly-Si/SiOx Passivating Contact Solar Cells

Despite the high efficiencies reached by heavily doped poly-Si/SiO x passivating contact solar cells, challenges like the high front parasitic absorption still limit their performance. Previously, we showed a wet etching technique using self-aligned metal grids to remove the front poly-Si in the non-metallized region. Here, we focus on the effective dielectric passivation on this tunneling oxide/n + in-diffused region. The effect of poly-Si thickness was studied to balance between the passivation quality and the current gain. We then compared various dielectric passivation schemes using SiN x , Al 2 O 3 , and stacks thereof via injection-level dependent lifetime and the transfer length method. We demonstrate a SiN x /Al 2 O 3 stack yielded the best passivation performance within device process limitation and obtained an improved front/back poly-Si/SiO x passivating contact device, with a short circuit current density of 41.8 mA/cm 2 and an efficiency of 21.8%.

anisotropic wet etching↗
DOE OSTI2022

Wet Waste Hydrothermal Liquefaction and Biocrude Upgrading to Hydrocarbon Fuels: 2021 State of Technology

Each year the U.S. Department of Energy Bioenergy Technologies Office (BETO) assesses progress in their research and development efforts toward sustainable production of renewable fuels (DOE 2016) through the annual state of technology (SOT) assessment. The SOT assessment evaluates the impact of the year’s research progress on the modeled minimum fuel selling price (MFSP) for selected biofuel conversion pathways and measures the current state of the technology relative to defined goal case projections. Supply chain sustainability analysis to track and guide research toward improved greenhouse gas (GHG) emissions, energy usage, water usage and other environmental metrics for the pathway is performed by Argonne National Laboratory (Cai et al. 2018, 2020). Technical and cost targets for a projected goal case set for the year 2022 were previously established for the wet waste hydrothermal liquefaction (HTL) and biocrude upgrading pathway and summarized in a design report (Snowden-Swan et al. 2017). Process performance advancements made for HTL and biocrude hydrotreating have resulted yearly reductions in the modeled MFSP relative to the initial SOT (2018) (Snowden-Swan et al. 2020, 2021). This report summarizes the research and associated techno-economic analysis (TEA) for the pathway 2021 SOT. Methods and economic assumptions for the nth plant analysis used for the TEA are consistent with the design report (Snowden-Swan et al. 2017), with the exception of updates in the modeled cost year (2016) and income tax rate (21%).

09 BIOMASS FUELS↗
DOE OSTI2022

Fabrication methods for high reflectance dielectric-metal point contact rear mirror for optoelectronic devices

The patterned dielectric back contact (PDBC) structure can be used to form a point-contact architecture that features a dielectric spacer with spatially distributed, reduced-area metal point contacts between the semiconductor back not recognized contact layer and the metal back contact. In this structure, the dielectric-metal region provides higher reflectance and is electrically insulating. Reduced-area metal point contacts provide electrical conduction for the back contact but typically have lower reflectance. The fabrication methods discussed in this article were developed for thermophotovoltaic cells, but they apply to any III-V optoelectronic device requiring the use of a conductive and highly reflective back contact. Patterned dielectric back contacts may be used for enhanced sub-bandgap reflectance, for enhanced photon recycling near the bandgap energy, or both depending on the optoelectronic application. The following fabrication methods are discussed in the article: PDBC fabrication procedures for spin-on dielectrics and commonly evaporated dielectrics to form the spacer layer; methods to selectively etch a parasitically absorbing back contact layer using metal point contacts as an etch mask; methods incorporating a dielectric etch through different process techniques such as reactive ion and wet etching.

14 SOLAR ENERGY↗
DOE OSTI2023

High Temperature Ternary Chloride Molten Salt Pump

This work investigates the design criteria considering thermal, structural, and material selection of a ternary chloride (MgCl2-NaCl-KCl) molten salt pump that is capable of running at temperatures above 720 °C. In this work, preliminary testing of salt-wetted hydrodynamic bearings was done to investigate different material pairings including Colmonoy grades, Stellite grades, and a novel Nickel Tungsten Carbide alloy (HybrimetTM NiWC3b) used as a High Velocity Oxygen Fuel (HVOF) coating. The coating has shown to withstand the corrosive nature of the molten salt. The pump wetted components are made of Inconel 625 and features a carbon ring seal (CIRPAC Seal) flooded with a N2 gas flow on the overhead to keep salt vapors from interacting with the external ambient air. A comprehensive pump test program has been completed. Over 90 hours run time pumping hot chloride salts at temperatures up to 720 °C in which enough data was captured to produce performance curves at 3 different operating speeds. This research showcases a promising design for use in the Concentrated Solar Power (CSP) Gen 3 liquid-pathway and sets the ground for further development and use of the HybrimetTM NiWC3b as a competitive alternative to available superalloys.

14 SOLAR ENERGY↗
DOE OSTI2022

High Temperature Ternary Chloride Molten Salt Pump

This work investigates the design criteria considering thermal, structural, and mate-rial selection of a ternary chloride (MgCl2-NaCl-KCl) molten salt pump that is capable of running at temperatures above 720 °C. In this work, preliminary testing of salt-wetted hydrodynamic bearings was done to investigate different material pairings including colmonoy grades, stellite grades, and a novel NiWC-based alloy (i.e. HybrimetTM NiWC3b) used as a High Velocity Ox-ygen Fuel (HVOF) coating. The coating has shown to withstand the corrosive nature of the salt, and is additionally used to protect a 316L stainless steel pump reservoir. The pump wetted components are made of Inconel 625, and it features a carbon ring seal developed by Flows-erve flooded with a N2 gas flow on the overhead to keep salt vapors from interacting with the external ambient air. This research showcases a promising design for use in the CSP Gen 3 liquid-pathway and sets the ground for further development and use of the HybrimetTM NiWC3b as a competitive alternative to available superalloys. Further work will further characterize the pump by performance & cycle testing in molten salt at higher temperatures.

14 SOLAR ENERGY↗
DOE OSTI2026

Evolution of size-selected Pt cluster catalysts on prototypical oxide supports

The current quest for new pathways into sustainable, efficient and durable energy conversion technologies makes the used for a fundamental understanding of the atomic-scale phenomena underlying catalytic processes ever more pressing. In this context, characterizing catalyst particles in situ provides valuable information about the evolution of their composition, structure, oxidation state and charge state during an ongoing process. To disentangle the influence of individual parameters – temperature, pressure, gas composition, cluster size, as well as support acidity, redox state and defect density – it is crucial to control them precisely and separately in experiments. At the example of size-selected Pt n clusters – i.e. sub-nm particles defined to the exact number of atoms – on flat oxide supports, we follow their rich evolution phenomena via (synchrotron-based) X-ray photoelectron spectroscopy (XPS) and scanning tunnelling microscopy (STM) during temperature ramps and in various gas environments. Here, we present our experience with these highly defined, yet complicated-to-create samples in ultra-high vacuum (UHV) and at mbar pressures. We discuss their stability during transport to synchrotrons and under reaction conditions on three prototypical oxide supports and show the various phenomena that can be disentangled. Ptn clusters on the non-reducible silicon dioxide, SiO 2 , remain size-selected and show remarkable stability. Doping strongly influences the size-dependent binding energy shifts and changes the Pt response to oxidative and reaction conditions, which we attribute to different cluster geometries: p-type doping leads to wetting, enhanced sinter resistance and a diminished response to oxidative environments, compared to clusters on n-type doped samples. We compare the system with our previous findings of a similar change in dimensionality for Pt 20 clusters on the reducible ceria, CeO 2 (111), support, induced by modulation of its O vacancy density. The Pt n /CeO 2 system is particularly interesting for strategies to stabilize and redisperse Pt clusters dynamically. Finally, we study the evolution of Pt n clusters on another reducible oxide support, magnetite, Fe 3 O 4 (001), in 0.1 mbar alternating redox conditions at RT and elevated temperature. In analogy to findings previously reported for Pt/TiO 2 (110), the clusters either become encapsulated by a thin oxide film via strong metal–support interaction (SMSI) or deeply buried in the magnetite. Overall, our approach of following the evolution of size-selected clusters on oxide supports leads to fundamental atomic-scale insights on nano-scale catalyst materials, on our path to sustainable, dynamic and self-repairing catalysts.

Falling, Lorenz J. [Technical Univ. of Munich (Ger↗
DOE OSTI2023

Towards improved conversion of wet waste to jet fuel with atomic layer deposition-coated hydrodeoxygenation catalysts

The conversion of wet waste-derived volatile fatty acids into jet fuel-range hydrocarbons is a promising route for increasing the production of sustainable aviation fuel; however, the cost and moderate alkane selectivity of Pt-based hydrodeoxygenation catalysts present challenges for commercialization. Here, to address this, we used atomic layer deposition to apply TiO 2 overcoats to Pt/Al 2 O 3 catalysts and create new interface sites that exhibited 8 times higher site time yield of the desirable n-alkane product than uncoated catalyst. Through TPR/TPD, XPS, CO DRIFTS, and DFT calculations, we found that the increased selectivity of the ALD-coated catalyst was due to the creation of O vacancies at the Pt-TiO 2 interface under reducing conditions, resulting in new Ti 3+ acid sites near the active metal. Maximum conversion and alkane selectivity during HDO was achieved with an ALD-coated 0.5% wt Pt catalyst, indicating that TiO 2 ALD can be used to maximize the utility of precious-metal catalysts.

09 BIOMASS FUELS↗
DOE OSTI2021

Solvent Processing and Ionic Liquid-Enabled Long-Range Vertical Ordering in Block Copolymer Films with Enhanced Film Stability

Rapid and reliable processing methods for forming ordered block copolymer (BCP) materials with low defect density in a thin film geometry are required for many nanotechnology applications. Vertically aligned BCP structures, in particular, have applications ranging from nanolithography for electronics and photonics to nanoporous membranes for water remediation and novel batteries for flexible electronics. However, the attainment of nearly complete vertical orientational order of the BCP ordered phase remains challenging. Solvent-based techniques, such as direct immersion annealing (DIA) and solvent vapor annealing (SVA), have immense potential for these applications of BCP films, as it allows for tuning of their thermodynamic, structural, and chain mobility driven kinetic properties. We first demonstrate that DIA, using a judicious choice of binary solvent mixtures along with a relatively hydrophobic ionic liquid (IL), induces the rapid vertical ordering in polystyrene-b-polymethylmethacrylate (PS-PMMA) block copolymer in lamellar films. The IL establishes synergy to the binary solvent mixture of toluene and heptane to 1 create a near-neutral solvent environment for attaining the vertical microstructure of the BCP. Next, we show that IL can suppress the de-wetting of the PS-PMMA films to achieve long-range order using SVA in cylindrical films for long annealing times. Both vertical and horizontal morphology is attained in these films by selecting different solvent environments. Furthermore, attaining enhanced vertical and horizontal BCP structure with long-range defect-free order by tuning solvent quality and using additives like IL can render them useful for many nanotech applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Substantial differences in soil viral community composition within and among four Northern California habitats

Abstract Viruses contribute to food web dynamics and nutrient cycles in diverse ecosystems, yet the biogeographical patterns that underlie these viral dynamics are poorly understood, particularly in soil. Here, we identified trends in soil viral community composition in relation to habitat, moisture content, and physical distance. We generated 30 soil viromes from four distinct habitats (wetlands, grasslands, woodlands, and chaparral) by selectively capturing virus-sized particles prior to DNA extraction, and we recovered 3432 unique viral ‘species’ (dsDNA vOTUs). Viral communities differed significantly by soil moisture content, with viral richness generally higher in wet compared to dry soil habitats. However, vOTUs were rarely shared between viromes, including replicates <10 m apart, suggesting that soil viruses may not disperse well and that future soil viral community sampling strategies may need to account for extreme community differences over small spatial scales. Of the 19% of vOTUs detected in more than one virome, 93% were from the same habitat and site, suggesting greater viral community similarity in closer proximity and under similar environmental conditions. Within-habitat differences indicate that extensive sampling would be required for rigorous cross-habitat comparisons, and results highlight emerging paradigms of high viral activity in wet soils and soil viral community spatial heterogeneity.

Durham, Devyn M.↗