Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Electrolyzers”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Ultrathin platinum nanowire based electrodes for high-efficiency hydrogen generation in practical electrolyzer cells

Significant reduction of noble metal catalyst loading and simplification of electrode fabrication are urgently needed in order to lower the cost of proton exchange membrane electrolyzer cells (PEMECs) for large-scale hydrogen production. Herein, we report an integrated electrode design comprising in-situ grown platinum nanowires (PtNW) on ultrathin titanium liquid/gas diffusion layers (LGDLs) via a cost-effective and green chemical synthesis approach. The ultrathin integrated PtNW electrodes showed a low cell voltage of 1.643 V and high efficiency of 90.08% at 1000 mA cm -2 using about 15 times lower catalyst loadings than a conventional catalyst-coated membrane in PEMEC tests. Ex-situ electrochemical characterizations and microscale visualizations further reveal that PtNW electrodes display highly efficient hydrogen evolution reactions and excellent electrode durability due to high active surface area, favorable bubble detachment, and structural stability. This work provides new insights into catalyst layer design and facile ultrathin electrode fabrication for more compact and low-cost PEM electrolyzers, fuel cells and other systems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Mass transport limitations in polymer electrolyte water electrolyzers using spatially-resolved current measurement

Here this work utilizes spatially-resolved current measurements to provide insight into mass transport limitations in electrolyzers that are not observable from traditional polarization measurement. In this study, two types of flow-fields (parallel and triple-serpentine) and two types of diffusion media (patterned porous thin titanium foil LGDLs and Ir-coated titanium felt PTLs) were examined. A non-uniform current distribution dominated by mass transport limitations was observed to be instigated by the restriction of liquid water transport to catalyst sites. Additionally, conditions are revealed which yield similar polarization performance but dissimilar current distributions. In such cases, the transport limitations for different architectures and porous media affect polarization in different regions of the active area. Furthermore, the triple-serpentine flow-field used in this study performs better than the parallel flow-field under mass transport limited operating conditions. This indicates that the parallel flow-field used in this study is more susceptible to starvation than the triple-serpentine flow-field for the electrolyzer studied.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2021

All-in-one bipolar electrode: A new concept for compact and efficient water electrolyzers

Highly compact and efficient proton exchange membrane electrolyzer cells (PEMECs) are strongly desired for commercializing hydrogen production. Here, a novel concept of all-in-one bipolar electrode (AIOBE) is proposed for high-efficiency and compact PEMECs with the help of 3D printing and sputtering coating. AIOBE ideally integrated catalyst layer (CL)/gas diffusion layer/bipolar plate/current distributor/gasket, which significantly reduced component quantity on the cathode side of PEMECs from 5 to 1, cut down on part weight and volume, and drastically accelerated the fabrication and maintenance processes. Moreover, AIOBE with the micro-scale flat surface and nano-scale rough CL provided an ultralow ohmic resistance (~100 mOhm cm 2 ) and a high catalyst utilization. Finally, AIOBE delivered a practical voltage of 1.62 V and a high energy efficiency of 91% at 1000 mA/cm 2 , and its mass activity (4.48 A/mg Pt ) was 14 times higher than conventional PEMECs. In conclusion, this work provides a new route for developing highly compact electrochemical devices, such as fuel cells, electrolyzers for N 2 reduction and CO 2 conversion, and many more.

3D printing↗
DOE OSTI2023

Electrolyzer and Fuel Cell Recycling for a Circular Hydrogen Economy

Abstract Electrolyzers and fuel cells will be crucial for achieving global clean hydrogen and industrial decarbonization goals. However, the nascent clean hydrogen sector faces uncertainties around material supply chains and technology end‐of‐life management. This work aims to guide the transition to a circular hydrogen economy by using process modeling, techno‐economic analysis, and life cycle assessment to evaluate the material cost, energy use, greenhouse gas (GHG) emissions, toxicity, and water use of five potential recycling strategies for proton exchange membrane electrolyzers (PEMWE) and fuel cells (PEMFC). Hydrometallurgy, acid dissolution, and electrochemical dissolution are shown to offer 2–7 times improvement across all assessed metrics relative to the manufacturing of PEMWE and PEMFC from raw materials. Recycling can also lower the raw material demand, material cost, energy use, and GHG emissions associated with PEMWE and PEMFC deployment in the United States in 2050 by 23%, 19%, 21%, and 16%, respectively. This study provides key insights into the costs, benefits, and complexities of recycling strategies for PEMWE and PEMFC, aiding the development of a circular economy that is synergistic with clean hydrogen deployment.

08 HYDROGEN↗
DOE OSTI2023

Hydrocarbon Ionomeric Binders for Fuel Cells and Electrolyzers

Abstract Ionomeric binders in catalyst layers, abbreviated as ionomers, play an essential role in the performance of polymer–electrolyte membrane fuel cells and electrolyzers. Due to environmental issues associated with perfluoroalkyl substances, alternative hydrocarbon ionomers have drawn substantial attention over the past few years. This review surveys literature to discuss ionomer requirements for the electrodes of fuel cells and electrolyzers, highlighting design principles of hydrocarbon ionomers to guide the development of advanced hydrocarbon ionomers.

25 ENERGY STORAGE↗
DOE OSTI2022

Phenyl‐Free Polynorbornenes for Potential Anion Exchange Ionomers for Fuel Cells and Electrolyzers

Abstract Ionomers in the catalyst layer play a critical role in the performance of fuel cells and electrolyzers. Phenyl adsorption on hydrogen oxidation catalysts and electrochemical oxidation of phenyl moieties on oxygen evolution catalysts are detrimental to the alkaline devices’ performance. Here the adsorption energy of phenyl‐containing ionomers is compared to provide the rationale for implementing phenyl‐free ionomers. Density functional theory calculations indicated that the norbornane fragment has minimal adsorption energy on Pt(111) due to the absence of aromatic π electrons. A soluble quaternized polynorbornene ionomer is prepared by vinyl addition polymerization, and it exhibits high performance in both fuel cells and electrolyzers, proving the advantage of the phenyl‐free structure. This study establishes the phenyl adsorption energy‐electrode performance relationship, highlighting the importance of material interactions between the catalysts and ionomers.

25 ENERGY STORAGE↗
DOE OSTI2025

Integration of hydrophobic gas diffusion layers for zero-gap electrolyzers to enable highly energy-efficient CO 2 electrolysis to C 2 products

Electrochemical CO 2 reduction (eCO2R) is an attractive route for mitigating global CO 2 emissions while producing value-added chemicals. Ethylene is one product of eCO2R and is an essential industrial precursor with a global market of $230 billion. The large-scale implementation of C 2 H 4 -selective CO 2 electrolyzers remains challenging because of low energy efficiencies. In this work, we develop the design principles necessary for incorporating an expanded polytetrafluoroethylene (ePTFE) electrode into a zero-gap electrolyzer while simultaneously developing an integrated electrical front contact that reduces the ohmic resistances inherent to electrically insulating gas diffusion layers. By co-designing the catalyst layer, gas diffusion medium, and operating conditions for a zero-gap ePTFE gas diffusion electrode (GDE), we achieved a full-cell voltage of 2.5 V at 200 mA cm −2 at 25 cm 2 geometric area cell with Faradaic efficiencies of 48% for ethylene and 40% for ethanol. This work highlights strategies for developing a scalable, stable, and highly energy-efficient eCO2R for C 2 products.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Two-phase flow numerical analysis of electrode geometry for alkaline water electrolyzers

Hydrogen is a promising component of a future energy-secure and efficient economy, but its competitiveness depends on reducing production costs. One strategy is to operate alkaline water electrolyzers at higher current densities to increase output. However, this intensifies performance losses due to gas bubble accumulation, which blocks transport pathways and deactivates electrochemically active surfaces. Enhancing bubble evacuation through electrode design is therefore essential. Previous studies have explored various approaches — such as modifying surface morphology, applying sonication or pressure modulation, and introducing surfactants — but these efforts have addressed a limited range of conditions due to the complexity of two-phase flow and electrode geometries. Experiments have also largely been focused on either cell level improvements, which lack the information necessary to isolate each contributing factor, or on modified geometries that are not relevant to practical cell operation. From a modeling perspective, conventional Eulerian multiphase models do not track the complex gas–liquid interfacial dynamics and often neglect surface tension and contact angle effects, reducing their predictive accuracy. To provide insights on the effects of different electrode geometries on the performance of alklaine water electrolyzers this work employs an immersed boundary volume-of-fluid method to simulate bubble behavior in 3D porous electrodes. Multiple base electrode geometries, typically used in practice, with varying porosity are evaluated under a constant surface gas generation rate. Simulation data is analyzed to quantify electrode gas coverage, bubble size dynamics and other relevant metrics. Results show that porosity strongly influences bubble accumulation on electrode surfaces, with higher porosity reducing gas coverage, and its not strictly dependent on the electrode geometry. However, the electrode’s base geometry significantly affects gas accumulation at the separator gap, independent of porosity. A foam electrode geometry resulted in the lowest gas coverage of all electrodes with a median volumetric gas coverage of 11%, but at the cost of a 70% reduction in active area compared with the largest surface area electrode, while gyroid electrodes showed the best trade-off between gas coverage, particularly at the separator surface, and electrochemically active area. In conclusion, the results highlight the need for holistic electrode design strategies.

Alkaline↗
DOE OSTI2021

Compressive Creep of Polymer Electrolyte Membranes: A Case Study for Electrolyzers

For proton-exchange membrane (PEM) water electrolyzers to be commercially feasible, PEMs must perform over long lifetimes in liquid environments under compression while maintaining mechanical stability. A hydrated environment, while inherent for operation and conductivity, undermines PEM stability. Mechanical stability of PEMs is commonly characterized in tension, which is not applicable to electrolyzers, wherein PEMs could undergo high pressures. In this study, a compression creep procedure is developed using a custom-designed setup to monitor creep response of hydrated PEMs. Furthermore, our results show that PEMs exhibit continuous creep response under compression over 24 h, with a dependence on the applied pressure and hydration state.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Engineered Thin Diffusion Layers for Anion-Exchange Membrane Electrolyzer Cells with Outstanding Performance

Anion-exchange membrane electrolyzer cells (AEMECs) are one of the most promising technologies for carbon-neutral hydrogen production. Over the past few years, the performance and durability of AEMECs have substantially improved. Herein, we report an engineered liquid/gas diffusion layer (LGDL) with tunable pore morphologies that enables the high performance of AEMECs. The comparison with a commercial titanium foam in the electrolyzer indicated that the engineered LGDL with thin-flat and straight-pore structures significantly improved the interfacial contacts, mass transport, and activation of more reaction sites, leading to outstanding performance. We obtained a current density of 2.0 A/cm 2 at 1.80 V with an efficiency of up to 81.9% at 60 °C under 0.1 M NaOH-fed conditions. The as-achieved high performance in this study provides insight to design advanced LGDLs for the production of low-cost and high-efficiency AEMECs.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Activity Convergence between Continuous- and Pulsed-Deposition NiFe Hydroxide Anodes in Liquid Alkaline Electrolyzers

Improving the activity of anodes for the alkaline oxygen evolution reaction (OER) is of interest because of the importance of the reaction in electrochemical technology. There is an abundance of studies which confirm that NiFe hydroxide, often prepared by electrodeposition, is the most active catalyst for the alkaline OER. This relatively high level of confidence in the optimal OER catalyst chemistry suggests that exploration of methods which improve on features besides the chemistry of the films, such as their microstructure, could access new heights of activity. In this study, the possible benefits of pulsed current deposition relative to the conventional continuous current approach to the deposition of NiFe hydroxides were investigated. Pulsed deposition densified the film surfaces by preventing metal ion depletion at the electrode surface during film formation. The Fe content, redox reversibility, and OER activity were higher for the pulsed deposition films relative to their continuous deposition counterparts. Though pulsed deposition imparted a higher OER performance of the films compared to continuous deposition at the three-electrode level, this improved performance was not retained during electrolyzer operation. Rather, a convergence of the cell performance is seen irrespective of the deposition approach. This phenomenon was attributed to the way electrolyzer conditionsrelatively high temperature, base concentration, and current densitycan drive alternate mechanisms for observed performance.

08 HYDROGEN↗
DOE OSTI2024

Electrolyzer Integrated Modular Nano-Array Monolithic Catalytic Reactors

The project objective is to design and develop a new class of electrolyzer-integrated, modular, nanostructure array (nano-array) monolithic catalytic reactors for high-flux, robust and selective methanol synthesis. The modular reactor features metal oxide nano-array grown on an additively-manufactured channeled honeycomb monolith made of ceramic or metals; this low-pressure carbon dioxide hydrogenation reactor is fueled with hydrogen from a low-temperature water electrolyzer having reduced platinum group metal (PGM) content. Through these nanostructured monolithic reactors, methanol synthesis is enabled with cost-effective hydrogenation reactions under low-temperature (<200°C) and low-pressure (<10 atm) conditions, thus significantly reducing the energy demand of the entire process.

08 HYDROGEN↗
DOE OSTI2026

Advanced PEM Electrolyzer Membrane for Hydrogen Crossover Mitigation

An unintended reaction in the electrochemical conversion of water to hydrogen in proton exchange membrane (PEM) electrolyzers is the crossover of hydrogen from the anode to the oxygen-containing cathode through the membrane, creating hydrogen losses and safety concerns. Efforts to date have focused on embedding platinum catalysts in perfluorosulfonic (PFSA) membranes to convert H 2 to protons. The objective of this project is to design and develop hydrocarbon (HC) proton exchange membranes (PEMs) that can help overcome the risk of high H 2 crossover in current PEM electrolyzer (ELX) stacks by designing and optimizing the gas recombination catalyst (GRC) within the membrane and membrane electrode assembly (MEA) structure.

08 HYDROGEN↗
NASA NTRS2012

High Performance Fuel Cell and Electrolyzer Membrane Electrode Assemblies (MEAs) for Space Energy Storage Systems

Regenerative fuel cells provide a pathway to energy storage system development that are game changers for NASA missions. The fuel cell/ electrolysis MEA performance requirements 0.92 V/ 1.44 V at 200 mA/cm2 can be met. Fuel Cell MEAs have been incorporated into advanced NFT stacks. Electrolyzer stack development in progress. Fuel Cell MEA performance is a strong function of membrane selection, membrane selection will be driven by durability requirements. Electrolyzer MEA performance is catalysts driven, catalyst selection will be driven by durability requirements. Round Trip Efficiency, based on a cell performance, is approximately 65%.

Plastic Encapsulated Microelectronics (PEM)↗
NASA NTRSDate not supplied

ISRU Advanced Alkaline Electrolyzer (AAE) BAA

This is the one-page status update for the Game Changing Development (GCD) Advanced Alkaline Electrolyzer (AAE) Broad Agency Announcement (BAA) contract with Teledyne Energy Systems, Inc (TESI) to be presented at the fiscal year 2020 (FY20) GCD Annual Review. This activity to develop and demonstrate a contamination-tolerant liquid water electrolyzer for use in in-situ resource utilization (ISRU) applications to generate gaseous hydrogen and oxygen.

Electrolyzer↗
DOE OSTI2024

In-line, High-Throughput Quality Monitoring for Fuel Cell and Electrolyzer Components Based on Transmission and Reflection Imaging

During the manufacturing of fuel cell and electrolyzer membranes and membrane electrode assemblies (MEAs), real-time, in-line, high-throughput optical-based quality monitoring methods are essential for detecting defects and monitoring thickness variations, thus improving the performance and increasing the durability of fuel cell and electrolyzer in the hydrogen industry. For the MEAs with very opaque coatings, optical transmission-based imaging has been developed and applied in the Roll-to-Roll system using a flashlight and a high-sensitivity CCD camera. We observed high signal-to-noise ratio images while the Roll-to-Roll system ran at 5 ft/min. The entire sample image could quickly be recovered from the discrete frames using customized Python codes for automatic frame cropping and stitching. We detected significant non-uniformities in our experimental MEAs specimen. For fuel cell and low-temperature electrolysis (LTE) transparent membranes, we used optical reflectance hyperspectral imaging with interference fringe-based thickness mapping. We set up a hyperspectral camera to measure various rolls of commercial membranes. The measurement results are analyzed to find the thickness distribution of each roll and to check for defects. Transmission and reflection imaging-based quality monitoring techniques demonstrated in this project can be widely used in the mass production environment to improve the production yield and performance of hydrogen devices.

DIRECT ENERGY CONVERSION,ENGINEERING↗
DOE OSTI2023

Pathways Toward Efficient and Durable Anion Exchange Membrane Water Electrolyzers Enabled By Electro‐Active Porous Transport Layers

Abstract Green hydrogen, produced via water electrolysis using renewable electricity, will play a crucial role in decarbonizing industrial and heavy‐duty transportation sectors. Anion exchange membrane water electrolyzers (AEMWEs) can overcome many of the performance and cost limitations of incumbent technologies, however, still suffer from durability challenges due to oxidative instability of anion‐exchange ionomers. Herein, the use of an electro‐active porous transport layer as anode (PTL‐electrode) is demonstrated to enable efficient and durable AEMWEs. The stainless‐steel PTL‐electrodes are shown to have superior performance and durability compared to traditional catalyst layers containing ionomer and nanoparticle catalysts. An AEMWE cell operating at 2 A cm −2 for over 600 h exhibited a degradation rate of just 5 µV h −1 . During operation, the surface composition of the stainless steel transforms into a mixture of iron and nickel oxyhydroxides, contributing to enhanced oxygen‐evolution reaction activity. The combination of experimental work and modeling elucidates how the bulk structure of the PTL‐electrode offers an additional design dimension to further improve electrolyzer performance. Lastly, a surface modification strategy is applied to a PTL‐electrode to achieve an even higher performing AEMWE (2.3 vs 2.0 A cm −2 at 1.8 V). Overall, this work lays out pathways toward more efficient, durable, and affordable AEMWEs.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗