Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “distributed data structures”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 883 records · Page 49
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

X-Ray Scattering Data Processing and Analysis

Semicrystalline polymers have a degree of crystallinity that depends on chain structure and crystallization conditions. Thermomechanical properties are influenced by the degree of crystallinity and crystalline morphology. A common method used to understand crystalline content, crystal and amorphous layer thickness, and layer thickness distributions, is X-ray scattering (XS). This report uses XS to first investigate crystalline orientation in high density polyethylene (HDPE) samples. Then, a single orientation is analyzed via XS in a temperature study to investigate crystalline behavior under changing temperatures. Lastly, block copolymer filaments extruded at varying speeds are analyzed. The X-ray data are used to gain a baseline understanding of crystalline behavior in these unique filaments.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Investigation of the impact of supplemental reflective films to improve micro-light climate within tomato plant canopy in solar greenhouses

The non-uniform growth and development of crops within Chinese Solar Greenhouses (CSG) is directly related to the micro-light climate within canopy. In practice, reflective films are used to improve micro-light climate within plant canopy by homogenizing light distribution and so increasing total plant light interception. However, as to our knowledge, the contributions to light distribution within canopy have not been investigated for passive reflector like reflective films. Field experiments dealing with light conditions and growth behavior over time, are complicated to carry out, time-consuming and hard to control, while however, accurate measurements of how reflective films influence the micro-light climate of canopy are an essential step to improve the growth conditions for any crop. Here, we propose a supplementary light strategy using reflective films to improve light distribution within plant canopy. Based on the example of CSG, a 3D greenhouse model including a detailed 3D tomato canopy structure was constructed to simulate the influence of supplementary reflective films to improve micro-light climate. Comparison of measured solar radiation intensity with predicted model data demonstrated that the model could precisely predict light radiation intensity over time with different time points and positions in the greenhouse. A series of reflective film configurations were investigated based on features analysis of light distribution in the tomato canopy on sunny days using the proposed model. The reflective film configuration scheme with the highest impact significantly improved the evenness of horizontal and vertical light distribution in tomato canopy. The strategy provided here can be used to configure reflective films that will enhance light conditions in CSG, which can be applied and extended in different scenarios.

Liu, Anhua↗
DOE OSTI2019

Coupled Geomechanical Modeling to Assess Cap Rock Integrity and Mechanical Fault Stability: Application to Farnsworth Field Unit Project

Abstract The SWP project is located in a mature waterflood undergoing conversion to CO2-WAG operations in the Farnsworth, Texas, USA. Anthropogenic CO2 is sourced from a fertilizer and an ethanol plant. This work utilizes Farnsworth’s full-field, history-matched, compositional hydrodynamic coupled geomechanical model for assessing the impact of stress changes observed through the history matched field life. Production and injection induced stress changes, fault stability and caprock integrity investigations are performed to project the potential for fault reactivation and the loss of caprock integrity under shear failure. A static mechanical earth model (MEM) was constructed for use in transient coupled geomechanical model based on the existing Southwest Regional Partnership (SWP) geological model. The static MEM inherits the stratigraphic and structural features of the geologic model and incorporates additional overburden, underburden, and sideburden formations required to impose mechanical boundary conditions. Mechanical properties were distributed in the 3D MEM through integration of geophysical logs and 3-dimensional seismic elastic inversion properties using a combination of Bayesian and stochastic interpolation methods. These data are further enhanced by lab derived strength and failure criteria for the caprock interval. Additionally, interpreted faults and other geological features were included as part of the static structural framework to fully represent subsurface hydraulic and mechanical systems and appropriately integrate heterogeneity. Two-way coupling of hydrodynamic flow and geomechanical simulations incorporates the Kozeny-Carman relationship for updating permeability and is history matched through primary, secondary (waterflooding) and tertiary (CO2 WAG) recovery periods before performing a twenty year forecast. Two-way simulations are performed to understand the effective stress perturbations imposed by field operations: water injection and the more recent implementation of WAG. Evaluation of Mohr circles with liquid production and field pressure charts as well as slip tendency and distance to failure metrics indicate that neither our faults or cap rock are critically stressed. This paper presents the results of the Farnsworth initial attempts to integrate the seismic driven 3D MEM into coupled hydrodynamic geomechanical history match simulation workflow.

02 PETROLEUM↗
NASA NTRS1994

CS multitransitional study of density distribution in star-forming regions. 2: The S140 region

The S140 molecular cloud was observed in five transitions of CS with resolutions of 11 to 45 arcsec. The data were analyzed with both the LVG and microturbulent models of radiative transfer to derive the density structure. It was found that the CS emission comes from three components of gas: a spherical component centered on the infrared cluster, an arc component along the ionization front between the S140 H II region and the dense molecular cloud core, and a high-velocity component from the dense part of a molecular outflow. The spherical component contributes most to the CS emission and was analyzed in more detail than the other components. Using a temperature distribution derived from an analysis of the dust emission from S140, we fit a power-law density distribution of n(r) = n(sub i)(r/r(sub i))(exp -alpha) to the spherical component. The best fit was for n(sub i) = 1.4 x 10(exp 6) (density at r(sub i) = 0.026 pc) and alpha = 0.8. The density (n(sub i)) was found to be greater than or equal to the density required to account for the dust emission, depending on the dust opacity laws adopted. The presence of optical emission (Dinerstein, Lester, & Rank 1979) suggests a clumpy structure for the dense gas. Considerations of the virial mass and the lowest amount of column density required to produce dust emission put the volume filling factor (f(sub nu)) of the dense gas at approximately 0.14-0.5. We compared S140 with other regions of star formation where the density structure has been derived from excitation analysis. Source-source variations in density gradients and clumpiness clearly exist, ranging from alpha = 2 and f(sub nu) approximately 1 in B335 to alpha approximately 0, f(sub nu) approximately 0.1 in M17. There is a tendency for more massive star-forming regions to have a flatter density distribution, a more clumpy structure, and a large number of young stars. The implications of this tendency are discussed.

Zhou, Shudong↗
DOE OSTI2023

Topological solitonic macromolecules

Being ubiquitous, solitons have particle-like properties, exhibiting behaviour often associated with atoms. Bound solitons emulate dynamics of molecules, though solitonic analogues of polymeric materials have not been considered yet. Here we experimentally create and model soliton polymers, which we call “polyskyrmionomers”, built of atom-like individual solitons characterized by the topological invariant representing the skyrmion number. With the help of nonlinear optical imaging and numerical modelling based on minimizing the free energy, we reveal how topological point defects bind the solitonic quasi-atoms into polyskyrmionomers, featuring linear, branched, and other macromolecule-resembling architectures, as well as allowing for encoding data by spatial distributions of the skyrmion number. Application of oscillating electric fields activates diverse modes of locomotion and internal vibrations of these self-assembled soliton structures, which depend on symmetry of the solitonic macromolecules. Our findings suggest new designs of soliton meta matter, with a potential for the use in fundamental research and technology.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2020

The shape of SN 1993J re-analysed

SN 1993J is one of the best-studied Type IIb supernovae. Spectropolarimetric data analyses were published over two decades ago at a time when the field of supernova spectropolarimetry was in its infancy. Here, we present a new analysis of the spectropolarimetric data of SN 1993J and an improved estimate of its interstellar polarization (ISP) as well as a critical review of ISP removal techniques employed in the field. The polarization of SN 1993J is found to show significant alignment on the q - u plane, suggesting the presence of a dominant axis and therefore of continuum polarization. We also see strong line polarization features, including H β, He i λ5876, H α, He i λ6678, He i λ7065, and high velocity (HV) components of He i λ5876 and H α. SN 1993J is therefore the second example of a stripped-envelope supernova, alongside iPTF13bvn, with prominent HV helium polarization features, and the first to show a likely HV H α contribution. Overall, we determine that the observed features can be interpreted as the superposition of anisotropically distributed line forming regions over ellipsoidal ejecta. We cannot exclude the possibility of an off-axis energy source within the ejecta. These data demonstrate the rich structures that are inaccessible if solely considering the flux spectra but can be probed by spectropolarimetric observations. In future studies, the new ISP corrected data can be used in conjunction with 3D radiative transfer models to better map the geometry of the ejecta of SN 1993J.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2024

BCSR on GPU: A Way Forward Extreme-scale Graph Processing on Accelerator-enabled Frontier Supercomputer

Handling large graphs in a distributed environment requires effective partitioning across processors and efficient management of local partitions. In 2D partitioning, local graphs often become too sparse, making memory-efficient data structures crucial. Using the Compressed Sparse Row (CSR) format wastes space, especially for > 83% of vertices with empty edges for the sparse graphs. This study explores bit-CSR (BCSR), a modified CSR representation, on GPUs to reduce memory usage in graph computations. We achieved 16.67% memory savings on a sparse rmat dataset with 268 million vertices and 357 million edges, without performance degradation, supported by both theoretical and experimental storage savings of 33%. However, we observed a 1.7× slowdown in degree lookup times due to bitwise operations on AMD CPUs. This analysis highlights the potential of BCSR on GPUs for improving Graph500 benchmark performance on GPU-accelerated systems, such as the Frontier supercomputer.

Sattar, Naw Safrin↗
DOE OSTI2019

Distributed Wireless Antenna Sensors for Boiler Condition Monitoring

Monitoring the operational conditions of coal-fired boilers is an important task that could bring tremendous benefits, including in-situ process control, real-time health assessment of structural components, improved heat transfer efficiency, reduced downtime, etc. Moreover, in-situ distributed sensing of the boiler conditions would provide large scale in-situ measurement data that will help us gain fundamental understandings of the combustion and heat transfer processes as well as enable the developments of new simulation tools, which could eventually lead to better design and more efficient operation of the boilers. The objectives of this research were to (a) develop wireless passive antenna sensors without electronics; (b) demonstrate multi-modality sensing using a signal antenna sensor; and (c) fabricate the antenna sensor from high-temperature materials. In this project, we have demonstrated that an antenna sensor or sensor array without any electronics can be wirelessly interrogated from a distance. In addition, a low-cost compact wireless sensor interrogator was developed for dynamic interrogation of the passive antenna sensor. We validated that a dual-frequency antenna sensor is capable of simultaneous strain and temperature measurements or temperature and ash accumulation measurements; all parameters are relevant to boiler condition monitoring. By measuring the temperature and ash accumulation height simultaneously, the dielectric constant of the ash as well as its temperature dependency can also be characterized. This capability could lead to potential applications of the antenna sensor for combustion process monitoring based on the ash composition. We also investigated different techniques of fabricating the antenna sensor using high-temperature materials such as alumina substrate and platinum paste and characterized the thermal response of the antenna sensor. A linear relationship between the antenna resonant frequency and the temperature change was validated.

20 FOSSIL-FUELED POWER PLANTS↗
NASA NTRS1981

The interstellar medium and galactic structure

High energy gamma rays are produced by the interaction of cosmic rays with the interstellar matter in the galaxy. By combining the gamma ray information with radio data, a picture of the galaxy is presented with regard to the general structure and the effects of cosmic ray pressure. The interaction processes and galactic matter distribution are discussed. Galactic cosmic ray distribution and current gamma ray results are reported.

Source record↗
NASA NTRS1985

Nitric oxide profile from 7 to 32 km

An analysis is given of some results of the LIMS experiment, launched on the Nimbus 7 satellite on October 24, 1978 for the purpose of sounding the middle atmosphere composition and structure. One of the LIMS channels was centered spectrally in the 6 micron region to measure vertical profiles and the global distribution of NO2 mixing ratio. The data reveal that NO2 is highly variable with altitude, latitude, longitude and time. Steep latitudinal gradients are observed in high latitude winter ('the NO2 cliff') when a wave number one pattern exists in the geopotential height field. The daytime gradient under these conditions is less than that for the night. The summer hemisphere column amount is considerably greater (by a factor of about 2) than in the winter hemisphere. The largest mixing ratios occur at 4 mb at night (about 20 ppbv) and 9 mb in the day (about 7 ppbv) and the latitude region of the peak mixing ratio is skewed toward the Southern Hemisphere. The mixing ratio variability is greater at night (by a factor of about 2 to 3) than in the day and there are significant long-term changes revealed by mixing ratio time series analyses on a pressure vs time grid.

Matthews, W. A.↗
NASA NTRS1987

The Arp Ring: Galactic or extragalactic?

The Arp Ring is a faint, loop-like structure around the northern end of M81 which becomes apparent only on deep optical photographs of the galaxy. The nature of the Ring and its proximity to M81 are uncertain. Is it simply foreground structure, part of this galaxy, or is it within the M81 system? Infrared Astronomy Satellite (IRAS) maps of the region show a far-infrared counterpart of the Ring. The infrared data are compared with previous optical and radio observations to try to ascertain its physical nature. The poor correlation found between the common infrared/optical structure and the distribution of extragalactic neutral hydrogen, and the fact that its infrared properties are indistinguishable from those of nearby galactic cirrus, imply that the Arp Ring is simply a ring structure in the galactic cirrus.

Abolins, J. A.↗
NASA NTRS1991

On the wind geometry of the Wolf-Rayet star EZ Canis Majoris

Recent models of Wolf-Rayet star winds have been tailored to EZ CMa, and make predictions of the envelope structure and location of line-emitting regions. It is discussed how the wind structure of EZ CMa can be probed observationally through electron distribution integrals as measured by spectropolarimetry, and then present, analyze, and interpret a time-dependent spectropolarimetric data set of EZ CMa. The observations further the view of an electron-scattering wind that is axisymmetric, rotating, and expanding, with a variable mass-loss rate being responsible for the quasi-periodic polarimetric variability. It is demonstrated that the emission lines of EZ CMa are partially polarized, indicating that line photons are electron-scattered in the wind. The polarization in N V lambda 4945 and N IV lambda 4058 is observed to be larger than that of He II lambda 4686 and He I lambda 5876, as expected from ionization stratification.

Schulte-Ladbeck, R. E.↗
NASA NTRS1995

Microelectromechanical Systems

Micro-electromechanical systems (MEMS) is an enabling technology that merges computation and communication with sensing and actuation to change the way people and machines interact with the physical world. MEMS is a manufacturing technology that will impact widespread applications including: miniature inertial measurement measurement units for competent munitions and personal navigation; distributed unattended sensors; mass data storage devices; miniature analytical instruments; embedded pressure sensors; non-invasive biomedical sensors; fiber-optics components and networks; distributed aerodynamic control; and on-demand structural strength. The long term goal of ARPA's MEMS program is to merge information processing with sensing and actuation to realize new systems and strategies for both perceiving and controlling systems, processes, and the environment. The MEMS program has three major thrusts: advanced devices and processes, system design, and infrastructure.

Gabriel, Kaigham J.↗
NASA NTRS2000

Effect of Combined Spaceborne Microwave and Continuous Lightning Measurements on Precipitation Forecasts of the 1998 Ground-Hog Day Storm

We evaluated the impact of several newly available sources of meteorological data on mesoscale model forecasts of precipitation produced by the extra-tropical cyclone that struck Florida on February 2, 1998. Precipitation distributions of convective rainfall events were derived from Special Sensor Microwave Imager (SSM/I) and Multi-Channel Passive Microwave Sensor (TMI) microwave radiometric data by means of the Goddard PROFiling (GPROF) algorithm. Continuous lightning distributions were obtained from sferics measurements obtained from a network of VLF radio receivers. Histograms of coincident sferics frequency distributions were matched to those of precipitation to derive bogus convective rainfall rates from the continuously available sferics measurements. SSM/I and TMI microwave data were used to derive Integrated Precipitable Water (IPW) distributions. The TMI also provided sea surface temperatures (SSTS) of the Loop Current and Gulf Stream with improved structural detail. A series of experiments assimilated IPW and latent heating from the bogus convective rainfall for six-hours in the MM5 mesoscale forecast model to produce nine-hour forecasts of all rainfall as well as other weather parameters. Although continuously assimilating latent heating only slightly improved the surface pressure distribution forecast, it significantly improved the precipitation forecasts. Correctly locating convective rainfall was found critical for assimilating latent heating in the forecast model, but measurement of the rainfall intensity proved to be less important. The improved SSTs also had a positive impact on rainfall forecasts for this case. Assimilating bogus rainfall in the model produced nine-hour forecasts of radar reflectivity distributions that agreed well with coincident observations from the TRMM spaceborne precipitation radar, ground based radar and spaceborne microwave measurements.

Weinman, James A.↗
NASA NTRS1998

Immunological and biochemical evidence for nuclear localization of annexin in peas

Immunofluorescent localization of annexins using an anti-pea annexin polyclonal antibody (anti-p35) in pea (Pisum sativum) leaf and stem epidermal peels showed staining of the nuclei and the cell periphery. Nuclear staining was also seen in cell teases prepared from pea plumules. The amount of nuclear stain was reduced both by fixation time and by dehydration and organic solvent treatment. Observation with confocal microscopy demonstrated that the anti-p35 stain was diffusely distributed throughout the nuclear structure. Immunoblots of purified nuclei, nuclear envelope matrix, nucleolar, and chromatin fractions showed a cross-reactive protein band of 35 kDa. These data are the first to show annexins localized in plant cell nuclei where they may play a role in nuclear function.

Non-NASA Center↗
DOE OSTI2022

Rheo-Structural Spectroscopy: Fingerprinting the In Situ Response of Fluids to Arbitrary Flow Fields

The objectives of this project were to develop new sample environments, measurement methodologies and associated modeling tools for characterizing the structural response to arbitrarily complex processing flows using small angle scattering, and to apply these new tools for understanding the fundamental physics governing the structuring of anisotropic particulate and polymeric materials under flow histories and conditions relevant to industrial processing flows. The research resulted in the development and implementation of a new sample environment, the fluidic four roll mill (FFoRM), for in situ small angle neutron and X-ray scattering (SANS/SAXS) measurements. These measurements are capable of generating large data sets that “fingerprint” how a complex fluid responds to a wide range of flow histories involving time variations in deformation type and rate. New modeling tools were developed to extract detailed microstructural information from such data sets, including orientation distribution functions and interparticle correlation functions, as well as reduced-order parametric descriptors of these high-dimensional functions that can be used to readily map, visualize and interpret a fluid’s structural response to its flow history. These new tools were applied to a range of model materials involving elongated particle suspensions in order to provide new insights into the physics of how flow couples with orientational and structural order in complex flows, particularly under non-dilute conditions for which no accurate theories currently exist. Using these investigations, we elucidated a number of new insights into the fundamental phenomena driving such process-structure-property relationships. These findings provide guidance for the further development of rheological models, and ultimately can inform the rational and model-based design of flow processes to achieve optimized orientational ordering that is key to the properties and function of a wide range of energy-relevant materials.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Reinforcement Learning-based Output Structured Feedback for Distributed Multi-Area Power System Frequency Control

Load frequency control (LFC) is a key factor to maintain the stable frequency in multi-area power systems. As the modern power systems evolve from centralized to decentralized paradigm, LFC needs to consider the decentralized scheme that considers limited information from the information-exchange graph for the generator control of each interconnected area. This paper aims to solve a data-driven constrained LQR problem with mean-variance risk constraints and output structured feedback, and applies this framework to solve the LFC problem in multi-area power systems. By reformulating the constrained optimization problem into a minimax problem, the stochastic gradient descent max-oracle (SGDmax) algorithm with zero-order policy gradient (ZOPG) is adopted to find the optimal feedback gain from the learning, while guaranteeing the convergence. In addition, to improve the adaptation of the proposed learning method to new or varying models, we construct an emulator grid that approximates the dynamics of a physical grid and performs training based on this model. Once the feedback gain is obtained from the emulator grid, it is applied to the physical grid with a robustness test to check whether the controller from the approximated emulator applies to the actual system. Numerical tests show that the obtained feedback controller can successfully control the frequency of each area, while mitigating the uncertainty from the loads, with reliable robustness that ensures the adaptability of the obtained feedback gain to the actual physical grid.

Kwon, Kyung-bin↗
NASA NTRS1987

Variations of electron distribution functions in the solar wind

Variations of electron distribution functions in the solar wind have been investigated using the electron data observed aboard Helios 2 during the first four months of its mission in 1976 in the distance range between 0.3 and 1 AU. In particular, variations across the sector structure of the interplanetary magnetic field and across the plasma stream structures have been studied. It has been found that there is a strong correlation between the electron properties and the sector structure of the magnetic field. Within the interior of magnetic sectors the electron distribution functions are extremely anisotropic and skewed with respect to the magnetic field direction at high particle energies. Toward sector boundaries the electron distribution functions become less anisotropic and less skewed. Right at sector boundaries the electrons are relatively cool, and their distributions are nearly isotropic often showing a slight bidirectional anisotropy. These observations have been interpreted to indicate that scattering of electrons with energies above 100 eV is weak within the interior of magnetic sectors but anomalous scattering increases drastically toward sector boundaries for all energies in the halo regime up to several hundred eV. There is evidence for closed magnetic field structures, probably occurring frequently in the solar wind, where the magnetic field lines should usually be connected to the sun outside sector boundaries but may or may not be disconnected from the sun at sector boundaries.

Pilipp, W. G.↗