Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “alternative technologies”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 883 records · Page 49
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

BACKFLIP: A Comparison of Emerging Non-Fluoropolymer-Based, Co-Extruded PV Backsheets to Industry-Benchmark Technologies

As the photovoltaic (PV) industry is rapidly expanding around the world, there has been an increasing interest in extending the lifespan of PV modules. Concern has also emerged regarding the recyclability of modules and their component materials, including fluoropolymer-based backsheets. Laminated polyethylene-terephthalate (PET) core backsheets have traditionally been used in the PV industry, but new, co-extruded polyolefin (PO) backsheets show promise as an improved alternative. Mini-module and coupon samples of seven different backsheets (made of layers including contemporary PET and fluoropolymers, novel PO, and polyamide (PA) materials) were run through hygrometric- or UV photolytic-accelerated aging to identify and better understand each material’s degradation modes and the backsheets’ field reliability. In addition to the artificial aging, the natural weathering methods used in this study are described. The comprehensive set of chemical, mechanical, and structural characterizations at intermittent read points in this study is presented, including: visual appearance and color; gloss; mechanical tensile testing; I-V performance; electroluminescence (EL) imaging; dielectric breakdown; FTIR-chemical structure; X-ray-polymer structure (WAXS); and DSC-crystalline content. After 4000 h of aging, a strong correlation occurs between initial physical characteristics (mechanical tensile test) and operating performance (EL and I-V characteristics).

41 EE - Solar Energy Technologies Office (EE-4S)↗
DOE OSTI2022

Optimizing conformance control for gas injection EOR in unconventional reservoirs

Field observations have shown that interference between wells caused by connected fractures commonly exists in unconventional reservoirs. The well interference effect and conformance issues could lead to minimal enhanced oil recovery response (EOR) in actual operations if they are not properly controlled. A series of data analysis, modeling, and experimental activities were performed in this study to investigate the gas EOR strategies in the Bakken Formation. Employing the embedded discrete fracture modeling technology, a multiple-well, multiple-fracture model was developed to capture the well interference and conformance issues in the Bakken. The model made it possible to investigate the complex flow behavior between wells in the EOR (huff ‘n’ puff) processes. Alternative EOR and conformance control strategies using water and surfactant injections were studied to improve oil production performance based on experimental observations. Results showed that water injection could be used for conformance control in the Bakken because of its relatively low mobility compared to gas; however, water could also block oil flow around the conformance control wells because of the high interfacial tension between oil and water. Adding surfactant to the injection water is more effective for improving gas EOR performance since surfactant reduces the oil–water interfacial tension and contact angle effectively. Up to 9.4% more oil could be produced from the huff ‘n’ puff wells in 2 years of EOR operations when rich gas was injected at only 3 MMscf/d with 6000 psi of surfactant injection in the offset wells for conformance control.

42 ENGINEERING↗
DOE OSTI2024

Ultraviolet-Activated Solid-State Nitrene Cross-Linking: A Scalable Pathway to Prolonged Lifespan in Anion Exchange Membranes

Anion exchange membranes (AEMs) offer a cost-effective alternative to proton exchange membranes as alkaline fuel cells and electrolyzers permit the use of non-platinum group electrodes and components. Despite continued progress, the operational lifetime and stability of these membranes limit the widespread adoption of AEM-based electrochemical technologies. This study presents a flexible and easily implemented ultraviolet (UV)-initiated nitrene-based cross-linking method which uses a small, facile organic azide precursor. As a proof of concept, we demonstrate this approach on the well-studied poly(2,6-dimethyl-1,4-phenylene oxide) quaternary ammonium AEM (QPPO) polyelectrolyte. Further, a survey of cross-linker density (2.5–10 mol %) found that the addition of 10 mol % results in a 59% reduction in water uptake, a 58.8% decrease in the swell ratio, and a 31% increase in tensile strength vs the un-cross-linked material. Nitrene cross-linking also enhanced the membrane’s durability, enabling 1000 h of stable performance under electrochemical load. This UV-initiated cross-linking method may be easily integrated into production processes, allowing chemical cross-linking at any stage, including posthydration.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Technoeconomic and Life Cycle Analysis of an Integrated Fermentation and Microbial Electrochemical Process for Volatile Fatty Acid Production from Food Waste

Techno-economic analysis (TEA) and life cycle assessment (LCA) were conducted for an integrated system designed for the production of volatile fatty acid (VFA) from food waste. The TEA estimated a production cost of $\$$3.12/kg VFA, and the LCA predicted negative greenhouse gas (GHG) emissions of -0.4 kg CO 2 e/kg VFA, driven primarily by diverting organic waste from landfills and avoiding methane emissions while producing valuable chemical products. Hotspot analysis showed arrested methanogenesis (AM) fermentation as the largest contributor to costs (37%) and environmental burden (47%), driven by high sodium hydroxide (NaOH) consumption. Distillation and microbial electrosynthesis (MES) units were the next-largest environmental contributors (28% and 18%). Major cost drivers also included residuals management (biosolids and wastewater) and the equipment and operating costs for AM, MES, and sonication pretreatment units. Although the new integrated system is environmentally benign, its costs and environmental impacts can be further reduced by integrating alternative energy sources, minimizing chemical and energy inputs through process optimization, and improving efficiency. In conclusion, this work highlighted the viability of waste-derived VFA production and provided a clear, data-driven strategy to accelerate the commercialization of waste valorization technology.

Carboxylic Acid Production↗
DOE OSTI2025

Galaxy formation with wave/fuzzy dark matter: The core-halo structure and the solitonic imprint

Dark matter-dominated cores have long been claimed for the well-studied local group dwarf galaxies. More recently, extended stellar halos have been uncovered around several of these dwarfs through deeper imaging and spectroscopy. Such core-halo structures (inner flat core and a characteristic r −3 asymptotic outer halo profile) are not a feature of conventional cold dark matter (CDM). In contrast, smooth and prominent dark matter cores are predicted for wave/fuzzy dark matter (ψDM). The question arises as to what extent the visible stellar profiles should reflect this dark matter core structure. Here we compare cosmological hydrodynamical simulations of CDM, “WDM” (model used as a proxy for ψDM) & ψDM, aiming to predict the stellar profiles for these three DM scenarios. We show that cores surrounded by extended halos are distinguishable for ψDM, where the stellar density is enhanced in the core due to the presence of the relatively dense soliton. Our analysis demonstrates that, in our simulations, a distinctive core-halo structure does not appear in the case of CDM in the DM, gas, or stars. Whereas we do find a core-halo transition for DM, gas, and stars for ψDM, and the scale of this transition is in line with the predicted core radius set by the soliton scale anticipated for the adopted boson mass of 2.5×10 −22 eV. The presence of a core-halo structure in the stellar profile for Galaxy 1 for ψDM is visible for the most massive and the first galaxy to form in the simulation. Clearly, further simulations are needed to establish how strict this possible relationship is between the DM and stellar core-halo profile as a potential observational discriminator. Furthermore, we observe the anticipated asymmetry for ψDM due to the soliton's motion (jumping and random walk), a distinctive characteristic not found in the symmetric distributions of stars in the warm and CDM models.

dark matter↗
DOE OSTI2026

Individual Motorist Data - Ohio EV Ownership Trends

The individual motorist dataset contains data and analysis of consumer electric vehicle (EV) ownership trends in rural Appalachian Ohio in comparison with statewide trends. The data span four years, from Q1 2020 to Q2 2023 (partial). They are sourced from the Ohio Bureau of Motor Vehicles registration records and contain detail on drivetrain type (battery-electric vehicle [BEV] or plug-in hybrid electric vehicle [PHEV]); specific vehicle make and model; and registration location at county, city, and ZIP code levels of spatial resolution. Registration data are analyzed at the county level against such indicators as median income, poverty status, urban-rural status, and density of public charging infrastructure. In addition to tabular data, a GIS shapefile with many analysis fields joined is included.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2021

Status Report on the Electroreduction of Metal Oxides

SRNL is working with Argonne National Laboratory (ANL) to adapt and demonstrate the electroreduction technology. SRNL will also draw on the extensive work cited in the literature and the experience gained at Y-12. Since most of the development efforts have focused on irradiated UO 2 fuel pellets, several noteworthy gaps exist in the technology for processing purified U 3 O 8 powder. SRNL research efforts will address some of those gaps. This report focuses on two activities. Task 1 is to establish an electrochemical reduction test capability at SRNL. Task 2 is to evaluate potential alternate anode materials.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2023

LANSCE Facility Longevity Assessment

This LANSCE Facility Longevity Assessment examined 34 total systems critical to the operation of the LANSCE accelerator complex. These systems are primarily owned, operated, and maintained by AOT Division. Based on the criteria used in this assessment, there are 12 AOT Division systems that are potential high risk as related to longterm LANSCE operations. These systems may also impact the success of LAMP. Also summarized in this report are the facility activities planned over the next decade. These include general facility maintenance and infrastructure upgrades, as well as planned electrical system upgrades. The LANSCE Facility Operations (LFO) Division is responsible for this activity scope and budget planning. Most of the planned activities are general in nature and should have little impact on accelerator operations or LAMP activities as currently envisioned. However, close coordination with between AOT, LFO, and LAMP would be prudent. A next step should be to develop an actionable plan to address the high-risk systems. Potential criteria for developing such a plan could include: (1) Evaluating the global impact of the system (operations, program, safety, etc.), (2) Ranking by impact (ranked now by risk), (3) Estimating cost to implement the corrective actions (Is there already a plan or not?), and (4) Estimating the time required for corrective actions. An alternative could include integration of the assessment data into both the Asset Management System and the Maintenance Analytics Risk Register.

43 PARTICLE ACCELERATORS↗
DOE OSTI2023

Coal as Value-Added for Lithium Battery Anodes (Final Report)

Graphite is a basic material used for energy storage in lithium-ion (Li-ion) batteries. More than 70% of worldwide graphite production and nearly 50% of the annual graphite supply for the United States comes from China. Potential economic and national security concerns exist because Li-ion batteries are used not only for the fast-growing electrical vehicle market (15.6% compound annual growth rate [CAGR] from 2018 to 2028 in North America), but also for defense applications including unmanned aerial and ground vehicles. Development of an alternative formulation for Li-ion batteries is key. Building upon previous research confirming the ability of silicon alloys to improve the energy density of anodes, Semplastics developed a novel material based on our X-MAT® polymer-derived ceramic (PDC) technology. The X-MAT anode material is a composite of chemically tailored silicon oxycarbide (SiOC) and domestically sourced coal powder, designed to be a drop-in replacement for graphite within Li-ion battery anodes. Preliminary tests of this material showed more than twice the reversible capacity of graphite anodes (1,000 mAh/g vs. 372 mAh/g), with excellent stability and capacity retention, almost 100% coulombic efficiency, low voltage potential, and low thermal expansion. At full adoption in 2024, we expect the coal utilization to reach 27,300 tons. Through this project, Semplastics proposed to complete development and begin commercialization of this material. The objective was to determine the best formulation for technical performance and economic viability. At the end of the project, the X-MAT anode material is ready for implementation into existing battery manufacturing processes and can have a significant impact on the utilization of coal, with positive effects for the mining sector and the mitigation of carbon dioxide (CO 2 ) emissions.

01 COAL, LIGNITE, AND PEAT↗
DOE OSTI2024

Leveraging Existing Assets for Long Duration Energy Storage

Increased renewables penetration to electrical grid is necessary to reduce overall emissions from the electrical power generation sector. Nonetheless, its integration creates challenges to grid operators who must match the power being generated by intermittent renewables and other traditional energy sources with the demand from consumers, while ensuring the reliability and power quality for the entire system. Energy storage has been proposed as an alternative to natural gas peaking plants and a form to deliver excess renewable energy generation at times of peak demand. For energy storage to provide benefits to end customers (energy consumers), it must be reliable, efficient, and cost effective. The Illinois Sustainable Technology Center (ISTC), one of the surveys that integrate the Prairie Research Institute (PRI), aims to develop a Center for Energy Storage at Existing Assets (CESEA) at UIUC with the participation of Waste Pressure Corp and Ecotek Engineering USA LLC. CESEA will focus on LDES systems that can integrate to existing infrastructure in a manner that reduces the initial capital expenditure and demonstrates the ability to repurpose fossil assets that would otherwise become stranded, to serve the energy transition. CESEA aims to leverage UIUC’s unique facilities to validate LDES systems performance at a relevant operating environment. UIUC’s facilities include a 85-MW combined heat and power (CHP) power plant, two (2) solar PV plants totaling over 18 MWdc of installed capacity, an electrical grid along with a substation at transmission and distribution voltages, a 22-mile gas pipeline network operating at two pressure levels, along with steam and chilled water distribution networks. The new LDES systems will connect to the existing UIUC grid through a new test electrical station, which will have the capacity to accommodate additional connections to test new devices and technologies as part of future CESEA R&D activities. The test electrical station will contain meters, instrumentation, and controls to accurately capture data and allow optimization of control algorithms. CESEA will initially focus on technologies that: i) utilize existing equipment or facilities to perform at least one of the process steps in LDES (charging, storage, or discharging), ii) leverage mature or commercially available components or controls, iii) show potential for cost-leadership in 10+ hour storage at a commercial scale. Initial technologies that were identified to meet these criteria include Compressed Gas Energy Storage (CGES), and TES. CGES stores electricity by raising the pressure of a compressible gas inside a control volume and converting the stored energy to electricity via expansion-generation. CGES is a generalization of CAES that covers any working gas (not just air). A successful CGES demo will help to circumvent many challenges faced by CAES (long development times due to site prospecting, high cost of compression and storage, heat recovery management, etc.) by: 1) utilizing existing infrastructure (compressors, pipelines, underground storage or pressure vessels) used in the transportation and storage of industrial gases for LDES charging and storage; 2) deploying over sites already-developed for industrial applications with minor additional work; 3) leveraging the price structure of commercial industrial gas to cover the costs of electricity used during charging. A previous DOE-sponsored conceptual study (DE-FE-0032018) estimated the levelized cost of energy of a 1.1 MW / 17 MWh CGES system at $0.08/kWh, with a commercial 10x scale system cost estimated at <$0.04/kWh (Giardinella, 2022). The pilot-sized system was estimated to avoid up to 2693 tons of CO2/year.

25 ENERGY STORAGE↗
DOE OSTI2023

Life Cycle Assessment of Innovative Carbon Dioxide Selective Membranes from Low Carbon Emission Sources: A Comparative Study

Carbon capture has been an important topic of the twenty-first century because of the elevating carbon dioxide (CO2) levels in the atmosphere. CO2 in the atmosphere is above 420 parts per million (ppm) as of 2022, 70 ppm higher than 50 years ago. Carbon capture research and development has mostly been centered around higher concentration flue gas streams. For example, flue gas streams from steel and cement industries have been largely ignored due to lower associated CO2 concentrations and higher capture and processing costs. Capture technologies such as solvent-based, adsorption-based, cryogenic distillation, and pressure-swing adsorption are under research, but many suffer from higher costs and life cycle impacts. Membrane-based capture processes are considered cost-effective and environmentally friendly alternatives. Over the past three decades, our research group at Idaho National Laboratory has led the development of several polyphosphazene polymer chemistries and has demonstrated their selectivity for CO2 over nitrogen (N2). Poly[bis((2-methoxyethoxy)ethoxy)phosphazene] (MEEP) has shown the highest selectivity. A comprehensive life cycle assessment (LCA) was performed to determine the life cycle feasibility of the MEEP polymer material compared to other CO2-selective membranes and separation processes. The MEEP-based membrane processes emit at least 42% less equivalent CO2 than Pebax-based membrane processes. Similarly, MEEP-based membrane processes produce 34–72% less CO2 than conventional separation processes. In all studied categories, MEEP-based membranes report lower emissions than Pebax-based membranes and conventional separation processes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Land-based wind turbines with flexible rail-transportable blades – Part 2: 3D finite element design optimization of the rotor blades

Abstract. Increasing growth in land-based wind turbine blades to enable higher machine capacities and capacity factors is creating challenges in design, manufacturing, logistics, and operation. Enabling further blade growth will require technology innovation. An emerging solution to overcome logistics constraints is to segment the blades spanwise and chordwise, which is effective, but the additional field-assembled joints result in added mass and loads, as well as increased reliability concerns in operation. An alternative to this methodology is to design slender flexible blades that can be shipped on rail lines by flexing during transport. However, the increased flexibility is challenging to accommodate with a typical glass-fiber, upwind design. In a two-part paper series, several design options are evaluated to enable slender flexible blades: downwind machines, optimized carbon fiber, and active aerodynamic controls. Part 1 presents the system-level optimization of the rotor variants as compared to conventional and segmented baselines, with a low-fidelity representation of the blades. The present work, Part 2, supplements the system-level optimization in Part 1 with high-fidelity blade structural optimization to ensure that the designs are at feasible optima with respect to material strength and fatigue limits, as well as global stability and structural dynamics constraints. To accommodate the requirements of the design process, a new version of the Numerical Manufacturing And Design (NuMAD) code has been developed and released. The code now supports laminate-level blade optimization and an interface to the International Energy Agency Wind Task 37 blade ontology. Transporting long, flexible blades via controlled flapwise bending is found to be a viable approach for blades of up to 100 m. The results confirm that blade mass can be substantially reduced by going either to a downwind design or to a highly coned and tilted upwind design. A discussion of active and inactive constraints consisting of material rupture, fatigue damage, buckling, deflection, and resonant frequencies is presented. An analysis of driving load cases revealed that the downwind designs are dominated by loads from sudden, abrupt events like gusts rather than fatigue. Finally, an analysis of carbon fiber spar caps for downwind machines finds that, compared to typical carbon fibers, the use of a new heavy-tow carbon fiber in the spar caps is found to yield between 9 % and 13 % cost savings.

17 WIND ENERGY↗
DOE OSTI2025

Technology Case Study: Economic, Sustainability, and Deployment Considerations for Sustainable Aviation Fuels Produced via Lignocellulosic Sugar Catalysis

This report presents a technology case study reflecting one exemplary representative pathway for the conversion of lignocellulosic sugars to sustainable aviation fuels (SAF) via aqueous phase reforming (APR) catalysis, considered within a broader integrated biorefinery framework based on biochemical processing operations. While far from the only option for converting sugars to SAF, this pathway was selected as a case study here based on its relatively high technology maturity and simplistic processing approach (avoiding complex separations or other equipment scalability challenges), coupled with the potential for high fuel yields and favorable costs/carbon intensities with opportunities for further near-term optimization. The report considers key process integration and engineering design considerations for a modeled hypothetical, nth-plant commercial biorefinery, reflecting a number of processing options and parameters envisioned to be achievable as future goals. Resultant outputs from Aspen Plus process simulations are evaluated through techno-economic and life cycle analyses (TEA and LCA), including implications for marginal cost of CO2 abatement and inclusion of currently-applicable policy incentives. Moving beyond base case configurations, a number of alternative scenarios are also evaluated for their ability to further improve economics, greenhouse gas (GHG) emissions, and marginal cost of abatement, highlighting a path to achieve deep decarbonization goals of more than 70% GHG reduction for SAF (with the potential to reach net-negative carbon intensities in some cases) under reasonable fuel production costs. The report also highlights future opportunities and gaps for further research on this technology pathway.

09 BIOMASS FUELS↗
DOE OSTI2021

Addressing energy storage needs at lower cost via on-site thermal energy storage in buildings

Cost-effective energy storage is a critical enabler for the large-scale deployment of renewable electricity. Significant resources have been directed toward developing cost-effective energy storage, with research and development efforts dominated by work on lithium ion (Li-ion) battery technology. Though Li-ion batteries have many attractive qualities, it is not clear whether they can provide an affordable levelized cost of storage (LCOS) for certain applications, such as buildings. Buildings consume most of the world's electricity, and as much as 50% of their consumption goes toward meeting thermal loads. Thermal energy storage (TES) can provide a cost-effective alternative to Li-ion batteries for buildings; however, two questions remain to be answered. First, how much of total building energy storage requirements can be met via thermal storage for building loads? Second, can the LCOS for TES be favorable compared with Li-ion batteries? In this perspective, using the United States as a case study, we show that the total requirement for TES in buildings is in the range of ~1200–4500 electrical GW h, depending on the fraction of solar versus wind in the generation mix. Furthermore, we show that with at least 25% wind generation, all of the storage needed by buildings to support the grid can be met by TES. We also introduce a framework to calculate LCOS for on-site TES in buildings to enable a direct comparison with electrical storage technologies such as Li-ion batteries. This is not trivial, because the input energy type for TES (electricity) differs from the output energy type (thermal energy), and the efficiency can depend on ambient conditions. Our LCOS analysis shows that in many situations, TES can be more cost-effective for buildings than Li-ion batteries. We conclude our perspective by discussing future research and development opportunities that can significantly advance the deployment of TES for buildings to help enable a renewable electricity-dependent grid.

25 ENERGY STORAGE↗
DOE OSTI2024

Dissimilar material joining of densified superwood to aluminum by adhesive bonding

Abstract Superwood is a densified wood product that shows promise as a lightweight and renewable alternative for metallic materials. In order for this high-performance new material to be used in multi-material products, it must be able to be joined with other major materials. For example, joining superwood to aluminum would provide a key enabling technology for its use in automotive components since aluminum is presently a major lightweight material for such applications. In this paper, a methacrylate-based adhesive has been identified to provide high lap shear strength (7.5 MPa) for aluminum-to-superwood joints. The aluminum-to-superwood samples were prepared with different amounts of pre-polishing to create openings to the pores in the superwood so adhesive could penetrate into them and create a mechanical interlock, in addition to the hydrogen/chemical bonding at the surface between the methyl methacrylate (MMA) in methacrylate-based adhesive and the cellulose in superwood. For aluminum samples, a thin layer (typically a few nanometers) of oxide film on the surfaces provides hydrogen/chemical bond to MMA structure in the adhesive layer. The failure strength of the superwood-to-aluminum joint sample is about 50% higher than that of natural wood to natural wood joint sample and comparable to that of aluminum-to-aluminum joint sample.

Automation & Control Systems↗
DOE OSTI2024

Strength-ductility synergy through microstructural and compositional heterogeneity in directed energy deposition additive manufacturing of face-centered cubic materials

Directed energy deposition (DED) is an additive manufacturing (AM) process based on welding technology and offers the advantages of large build volume, high deposition rate, and ability to fabricate multi-material parts. Epitaxial continuous columnar grain growth is a characteristic microstructural feature of DED processed alloys. In this study, a bamboo-like microstructure (periodic alternation of equiaxed and columnar structure) was produced by adopting an intermittent deposition strategy in 316L stainless steel and Inconel 625. The formation of a bamboo-like alternating microstructure was confirmed through electron backscattered diffraction (EBSD) analysis. Hardness mapping showed that the columnar to equiaxed transition (CET) occurred at the region right below the fusion line. A finite element (FE) model was used to investigate the relationship between the temperature gradient (G) and the solidification rate (R). The FE model showed a low G/R ratio at the region right below the interface promoting the CET. The grain size and material-dependent deformation behaviors are analyzed using digital image correlation (DIC). The lower deformation on the fine-grain regions observed in DIC analysis is attributed to a higher strain hardening rate, which is confirmed through dislocation density analysis on a tensile-interrupted specimen. The periodically alternating grain size coupled with the microstructural changes caused by intermittent deposition strategy result in a better strength-ductility synergy in both single-material and bimetallic specimens.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Three-dimensional dispersion in the type-II Dirac semimetals PtTe 2 and PdTe 2 revealed through circular dichroism in angle-resolved photoemission spectroscopy

PtTe 2 and PdTe 2 are among the first transition metal dichalcogenides that were predicted to host type-II Dirac fermions, exotic particles prohibited in free space. These materials are layered and air stable, which makes them top candidates for technological applications that take advantage of their anisotropic magnetotransport properties. Here, in this work, we provide a detailed characterization of the electronic structure of PtTe 2 and PdTe 2 using angle-resolved photoemission spectroscopy (ARPES) and density functional theory calculations, offering an alternative interpretation for one of the Dirac-like dispersions in these materials. Through the use of circularly polarized light, we report a different behavior of such dispersion in PdTe 2 compared to PtTe 2 , that we relate to a symmetry analysis of the dipole matrix element. Such analysis reveals a link between the observed circular dichroism and the different momentum-dependent terms in the dispersion of these two compounds, despite their close similarity in crystal structure. Additionally, our data show a clear difference in the circular dichroic signal for the type-II Dirac cones characteristic of these materials, compared to their topologically protected surface states. Our paper provides a useful reference for the ARPES characterization of other transition metal dichalcogenides with topological properties and illustrates the use of circular dichroism as a guide to identify the topological character and attributes of two otherwise equivalent band dispersions.

angle-resolved photoemission spectroscopy↗
DOE OSTI2023

Electro-Oxidative Dehydrogenation of Ethane to Ethylene Using Lanthanum-Strontium-Iron Oxide Perovskite Electrocatalysts

Developing alternative, industrially viable ethylene production routes has received important research attention. One chemical pathway of interest is the oxidative dehydrogenation (ODH) of ethane, although issues such as product selectivity, combustion hazards, and oxidizer supply have hindered the practical scale-up of this technology. The presented work describes the use of a solid oxide fuel cell (SOFC) platform employing lanthanum-strontium-iron oxide perovskite (La 1-x Sr x FeO 3-δ , or LSFx) electrocatalysts to perform electrochemical-ODH (e-ODH), a process design that has the potential to address the challenges of ODH implementation. The effects of La and Sr stoichiometry, operating temperature, and current density are reported. The highest performance was observed using a La:Sr ratio of 0.50 (LSF0.50) at 750 °C and a current density of 0.50 A·cm –2 , achieving an ethane conversion of 18.7 ± 0.3%, ethylene selectivity of 91.4 ± 1.9%, and ethylene yield of 17.1 ± 0.1%. These results demonstrate several potential advantages for utilizing a SOFC platform to perform e-ODH of ethane to ethylene.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗