Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Test Loop”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 883 records · Page 49
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Transient Efficiency, Flexibility, and Reliability Optimization of Coal-Fired Power Plants - Final Program Review

This program developed an advanced model-based monitoring and model-predictive control algorithms for a coal fired power plant (CFPP), and deployed these algorithms in a real-time platform to demonstrate performance benefits for transient flexibility and plant operation efficiency. More specifically, the objectives were successfully achieved through a combination of (i) developing a high-fidelity transient plant model in Apros, which was used as a high-fidelity plant simulation between $100-50\% TMCR$ where TMCR denotes the turbine maximum continuous rating, i.e., baseload, (ii) developing a very fast physics-based reduced-order model (ROM) of the plant, which ran more than $100\times$ faster than real-time, enabling its use as real-time embedded model for model-based estimation (MBE) and model predictive control (MPC) (iii) implementing a real-time MBE based on ROM using a robust unscented Kalman filter (UKF) to continuously tune the ROM to match the measurements from high-fidelity Apros plant model despite significant plant-model mismatch, and thus, obtain a Digital Twin of the plant (iv) designing and implementing a real-time MPC with dual objectives of transient plant load tracking with high ramp rates and minimizing coal consumption, i.e., improving plant efficiency in the baseload-partload operation range of $100-50\% TMCR$. Each key element above was developed and tested individually, and has been reported in corresponding Topical Reports. Finally, all the individual elements were integrated in an overall closed-loop system, that was successfully tested in desktop Simulink test harness simulations with ROM or high-fidelity model as the plant. Thereafter, the Simulink implementation was used to auto-generate C-code and deploy as real-time Docker microservice containers in Linux, and validate that they can run in real-time in the hardware-in-the loop (HIL) setup and produce the same results as in Simulink. The results of the integrated simulation tests in Simulink as well as the real-time HIL deployment are documented in this final report, showing good load tracking for load ramps at $3-4\%/min$ ramp rates, and achieving up to $5.5\%$ reduction in coal relative to baseline operation at $50\% TMCR$ load. The desktop and HIL simulations show successful performance of the overall model based estimation and control solution and achieve the key objectives of the program for flexible, efficient and reliable operation of sub-critical coal fired power plants.

20 FOSSIL-FUELED POWER PLANTS↗
NASA NTRS2006

Exploratory Studies in Generalized Predictive Control for Active Gust Load Alleviation

The results of numerical simulations aimed at assessing the efficacy of Generalized Predictive Control (GPC) for active gust load alleviation using trailing- and leading-edge control surfaces are presented. The equations underlying the method are presented and discussed, including system identification, calculation of control law matrices, and calculation of commands applied to the control effectors. Both embedded and explicit feedforward paths for inclusion of disturbance effects are addressed. Results from two types of simulations are shown. The first used a 3-DOF math model of a mass-spring-dashpot system subject to user-defined external disturbances. The second used open-loop data from a wind-tunnel test in which a wing model was excited by sinusoidal vertical gusts; closed-loop behavior was simulated in post-test calculations. Results obtained from these simulations have been decidedly positive. In particular, results of closed-loop simulations for the wing model showed reductions in root moments by factors as high as 1000, depending on whether the excitation is from a constant- or variable-frequency gust and on the direction of the response.

Kvaternik, Raymond G.↗
DOE OSTI2022

COUPLED MULTIPHYSICS PRIMARY LOOP SIMULATIONS OF THE Mk1-FHR IN THE VIRTUAL TEST BED

The Virtual Test Bed (VTB) repository hosts a wide range of challenge problems to showcase modeling and simulation capabilities to support advanced reactor demonstration. A coupled multiphysics model of the Mk1 pebble-bed fluoride-salt-cooled high-temperature reactor (PB-FHR) is presented here. The analysis leverages NEAMS tools (Griffin), SAM, Pronghorn, and the MOOSE heat conduction module) for core neutronics, thermal hydraulics of the core and the primary loop, and multiscale fuel performance simulations. The analysis was entirely created by coupling standalone simulations of the reactor previously available on the VTB. All input files and documentation developed for this example are available on the VTB website: \url{mooseframework.inl.gov/virtual_test_bed/}}. This model was featured in the NRIC Tech Talk presented in December 2021.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2023

The Innovation of I-Loop

The closing and decommissioning of Halden Boiling Water Reactor in Norway resulted in the loss of many nuclear irradiation testing facilities, notably those providing boiling water reactor (BWR) environments. To lighten the loss of such an important asset, the Advanced Test Reactor (ATR) is being called upon. The recent overhaul of the ATR’s core and the installation of the new Top Head Closure Plate now makes it possible to utilize the ATR’s I-loop locations for I-Loop Tube test facilities. Similar to the current in-pile tube facilities, these new I-Loop facilities will capitalize on the available space and neutron flux the ATR generates in this region of the core for fuels and materials testing. Current efforts are underway to add new PWR and BWR I-Loop Tube facilities to the I-Loop positions for these purposes.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗
DOE OSTI2023

Supersymmetric Wilson loops on the lattice in the large N limit

We propose additional tests of holography by studying supersymmetric Wilson loops in p+1-dimensional maximally supersymmetric Yang?Mills (SYM) theories on the lattice in the large N limit. In the dual gravity description, this computation involves calculating the area of a fundamental string worldsheet in certain Type II supergravity backgrounds. Though thermodynamic observables have been computed on the lattice using Monte Carlo methods and agree with the supergravity results in various dimensions, not much has been done for the gauge-invariant operators such as the Wilson loop. We provide analytical predictions for these loops for various non-conformal Dp-brane background cases with ? ? 2 p?2 in the large N limit and comment on how these can be computed on non-orthogonal lattices in various models.

Jha, Raghav G. (ORCID:0000000329330102)↗
NASA NTRS2012

An Overview of the Semi-Span Super-Sonic Transport (S4T) Wind-Tunnel Model Program

A summary of computational and experimental aeroelastic (AE) and aeroservoelastic (ASE) results for the Semi-Span Super-Sonic Transport (S4T) wind-tunnel model is presented. A broad range of analyses and multiple AE and ASE wind-tunnel tests of the S4T wind-tunnel model have been performed in support of the ASE element in the Supersonics Program, part of the NASA Fundamental Aeronautics Program. This paper is intended to be an overview of multiple papers that comprise a special S4T technical session. Along those lines, a brief description of the design and hardware of the S4T wind-tunnel model will be presented. Computational results presented include linear and nonlinear aeroelastic analyses, and rapid aeroelastic analyses using CFD-based reduced-order models (ROMs). A brief survey of some of the experimental results from two open-loop and two closed-loop wind-tunnel tests performed at the NASA Langley Transonic Dynamics Tunnel (TDT) will be presented as well.

Silva, Walter A.↗
NASA NTRS1989

Elevated temperature crack growth

Alloy 718 crack growth experiments were conducted to assess the ability of the selected path-independent (P-I) integrals to describe the elevated temperature crack growth behavior. These tests were performed on single edge notch (SEN) specimens under displacement control with multiple extensometers to monitor the specimen and crack mouth opening displacement (CMOD). The displacements in these tests were sufficiently high to induce bulk cyclic inelastic deformation of the specimen. Under these conditions, the linear elastic fracture mechanics (LEFM) parameter K does not correlate the crack growth data. The experimentally measured displacement gradients at the end of specimen gage length were used as the boundary conditions in elastic-plastic finite element method (FEM) analyses. These analyses were performed with a node release approach using CYANIDE, a GEAE FEM code, which included a gap element which is capable of efficiently simulating crack closure. Excellent correlation was obtained between the experimentally measured and predicted variation of stress and CMOD with crack length and the stress-CMOD loops for Alloy 718 tests conducted at 538 C. This confirmed the accuracy of the FEM crack growth simulation approach. The experimentally measured crack growth rate data correlated well the selected P-I integrals. These investigations have produced significant progress in developing P-I integrals as non-linear fracture mechanics parameters. The results suggest that this methodology has the potential of accurately describing elevated temperature crack growth behavior under the combined influence of thermal cycling and bulk elastic-inelastic deformation states.

Kim, K. S.↗
NASA NTRS2014

Simulated Time Lags of Hinode/XRT and SDO/AIA Lightcurves as an Indication of Loop Heating Scenario

The precise nature of the heating mechanism (location, duration) in coronal loops is still a matter of enormous research. We present results from a one-dimensional (1D) hydrodynamic loop simulation of a coronal loop which was run using different parameters such as loops length (50, 200 and 500 light-seconds), maximum temperature reached (3 million degrees Kelvin and 10 million degrees Kelvin), and abundances. For each scenario the model outputs were used to calculate the corresponding lightcurves as seen by X-ray telescope/Be-thin filter and various Extreme Ultra Violet Atmospheric Imaging Assembly channels. The lag time between the peak of these lightcurves was computed using cross-correlation and plotted as a function of loop length. Additional results were computed using the zero-dimensional Enthalpy-Based Thermal Evolution of Loops (EBTEL) code in order to test the compatibility of the two codes and to investigate additional loop lengths. Initial results indicate that the long (greater than 5000 seconds) lags observed in the approximately 100 light-seconds loops of active regions can only be reproduced using photospheric abundances and much longer loop lengths. This result suggests that the observed time lags cannot be completely explained by impulsive heating.

nanoflares↗
DOE OSTI2022

Situational Awareness of Grid Anomalies (SAGA)

The modern power industry becomes more vulnerable to cyber events due to the growing interconnectivity, interdependence, and complexity of the electric power grid. High-fidelity modeling and simulation tools that support the preventative risk analysis on potential cyber-relevant events is essential for ensuring the situational awareness of the system operator as it provides an inexpensive and risk-free environment to test the system responses under various cyber-relevant events and hereby can support research on cyber anomaly detection, optimal protective resource allocation, and mitigation measures. In this webinar, we will share NREL's cybersecurity research capabilities by highlighting the development of a scalable cyber-physical event test bed and demonstration with real hardware in the loop. The developed cyber-physical event test bed is backboned by an integrated transmission, distribution, and communication dynamic co-simulation framework and a plug-and-play cyber event generation module. It is designed to be modular and compatible with parallel computing, and thereby supports large-scale system simulations at an affordable computation cost. The test bed can capture millisecond-to-minutes dynamic frequency and voltage responses under cyber events from the bulk transmission system to the active distribution systems and distributed energy resources at the grid edge.

co-simulation↗
NASA NTRS2009

Open-Loop Pitch Table Optimization for the Maximum Dynamic Pressure Orion Abort Flight Test

NASA has scheduled the retirement of the space shuttle orbiter fleet at the end of 2010. The Constellation program was created to develop the next generation of human spaceflight vehicles and launch vehicles, known as Orion and Ares respectively. The Orion vehicle is a return to the capsule configuration that was used in the Mercury, Gemini, and Apollo programs. This configuration allows for the inclusion of an abort system that safely removes the capsule from the booster in the event of a failure on launch. The Flight Test Office at NASA's Dryden Flight Research Center has been tasked with the flight testing of the abort system to ensure proper functionality and safety. The abort system will be tested in various scenarios to approximate the conditions encountered during an actual Orion launch. Every abort will have a closed-loop controller with an open-loop backup that will direct the vehicle during the abort. In order to provide the best fit for the desired total angle of attack profile with the open-loop pitch table, the table is tuned using simulated abort trajectories. A pitch table optimization program was created to tune the trajectories in an automated fashion. The program development was divided into three phases. Phase 1 used only the simulated nominal run to tune the open-loop pitch table. Phase 2 used the simulated nominal and three simulated off nominal runs to tune the open-loop pitch table. Phase 3 used the simulated nominal and sixteen simulated off nominal runs to tune the open-loop pitch table. The optimization program allowed for a quicker and more accurate fit to the desired profile as well as allowing for expanded resolution of the pitch table.

Stillwater, Ryan A.↗
NASA NTRS1986

Energy Efficient Engine: Control system preliminary definition report

The object of the Control Preliminary Definition Program was to define a preliminary control system concept as a part of the Energy Efficient Engine program. The program was limited to a conceptual definition of a full authority digital electronic control system. System requirements were determined and a control system was conceptually defined to these requirements. Areas requiring technological development were identified and a plan was established for implementing the identified technological features, including a control technology demonstration. A significant element of this program was a study of the potential benefits of closed-loop active clearance control, along with laboratory tests of candidate clearance sensor elements for a closed loop system.

Howe, David C.↗
NASA NTRSDate not supplied

Rapid Aero Modeling for Urban Air Mobility Aircraft in Computational Experiments

Rapid Aero Modeling (RAM) applied to computational testing, RAM-C, is an approach to efficiently and automatically obtain aerodynamic models during computational investigations. RAM-C is designed to estimate models appropriate for flight dynamics studies and simulations. The approach responds to a demand for experimental efficiency and model fidelity that has increased with growing aircraft complexity and aerodynamic nonlinearities associated with hybrid and electric vertical takeoff and landing (eVTOL) aircraft. In an Urban Air Mobility (UAM) transportation system, it is expected that aircraft will embrace many features from both airplanes and rotorcraft. These vehicles present many more factors than conventional aircraft which can lead to increased computational costs and missed key factor interactions when applying traditional testing and modeling methods. RAM-C provides feedback loops around computational codes to rapidly guide testing toward aerodynamic models meeting user-defined fidelity goals. It combines and extends concepts from design of experiment theory and aircraft system identification theory that allow the user the freedom to choose, in advance of the test, a specific level of fidelity in terms of prediction error. RAM-C only collects enough data required to meet the user-specified prediction error requirements thus saving computational time and resources. The overall achievable fidelity of the final model also depends on the accuracy of the test facility, or in this case, the computational modeling approach. Previous studies to support development of the RAM-T process were conducted in wind tunnel tests to assess potential metrics, algorithms, and procedures. This paper presents results from the next steps taken and tests conducted for the development of RAM-C technology and highlights some of the unique features of RAM applied eVTOL configurations in a computational study.

Aerodynamics↗
NASA NTRS2024

Historical Aerospace Software Errors Categorized to Influence Fault Tolerance

Since the first use of computers in space and aircraft, software errors have occurred. These errors can manifest as loss-of-life or less catastrophically. As the demand for automation increases, software in mission or safety-critical systems should be designed to be tolerant to the most likely software faults. This paper categorizes a set of 55 historic aerospace software error incidents from 1962 to 2023 to determine trends of how and where automation is most likely to fail, behaving unexpectedly. A distinction between software producing unexpected (erroneous) output versus no output (failsilent) is introduced. Of the historical incidents analyzed, 85% were from software producing wrong output rather than simply stopping. Rebooting was found to be ineffective to clear erroneous behavior, and not reliable to recover from silent failures. Error origin was within the code/logic itself in 58% of cases, 16% from configurable data, 15% from unexpected sensor input, and 11% from command/operator input. A substantial forty percent (40%) of unexpected software behavior was indicated by the absence of code, arising from unanticipated situations and missing requirements, and 16% of incidents were subjectively deemed “unknown-unknowns”. No incidents were found to be the result of programming language, compiler, tool, or operating system; and only sixteen percent (16%) of all incidents were considered errors traditional computer science/programming in nature. These findings indicate that for fault tolerance, erroneous automation behavior must be a primary consideration especially at critical moments, and reboot recoverability may not be viable. Special care should be taken to validate configurable data and commands prior to use. “Test-like-you-fly”, including hardware-in-the-loop combined with robust off-nominal testing should be used to uncover missing logic arising from unanticipated situations not covered by requirements alone. This study uniquely focuses on manifestations of unexpected flight software behavior, independent of ultimate root cause. We characterize software error behavior and origin to improve software design, test, and operations for resilience to the most common manifestations, and provide a rich dataset for further study.

Aerospace↗
NASA NTRS1984

Control system testing

A three stage process of ground testing of the Space Telescope Pointing Control System is used for verification prior to on-orbit operation. First, development tests are conducted in a laboratory environment using flight/engineering model control sensor and actuators configured with an engineering model of the flight computer and data management system breadboards. These development tests validate the results of computer simulations predicting control system performance. Integration tests bring together flight system elements and software interfaced to a software simulation of vehicle dynamics to confirm closed loop performance. The final ground test phase, flight systems testing, is conducted on the fully assembled Space Telescope, verifies interfaces with the Fine Guidance Sensors and includes a thermal vacuum testing period. During the final test phase, the Point Control System is exercised with the dynamics simulator running in real time.

Whittler, W. H.↗