Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Radiative properties”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 883 records · Page 49
All sourcesNASA NTRSDOE OSTI
NASA NTRS1997

Characterizing Surfaces of the Wide Bandgap Semiconductor Ilmenite with Scanning Probe Microcopies

Ilmenite (FeTiO3) is a wide bandgap semiconductor with an energy gap of about 2.5eV. Initial radiation studies indicate that ilmenite has properties suited for radiation tolerant applications, as well as a variety of other electronic applications. Two scanning probe microscopy methods have been used to characterize the surface of samples taken from Czochralski grown single crystals. The two methods, atomic force microscopy (AFM) and scanning tunneling microscopy (STM), are based on different physical principles and therefore provide different information about the samples. AFM provides a direct, three-dimensional image of the surface of the samples, while STM give a convolution of topographic and electronic properties of the surface. We will discuss the differences between the methods and present preliminary data of each method for ilmenite samples.

Wilkins, R.↗
DOE OSTI2022

Phase stability, mechanical properties, and ion irradiation effects in face-centered cubic CrFeMnNi compositionally complex solid-solution alloys at high temperatures

We report two CrFeMnNi face-centered cubic complex concentrated solid-solution alloys (CSA) have been evaluated for phase stability, mechanical properties, and radiation damage effects from heavy ions. Cr 18 Fe 27 Mn 27 Ni 28 and Cr 15 Fe 35 Mn 15 Ni 35 were predicted by thermodynamic calculations to phase separate and maintain a single phase at 700 °C, respectively. Aging experiments at this temperature confirmed varying degrees of precipitation of a body-centered cubic phase in both Cr 18 Fe 27 Mn 27 Ni 28 and Cr 15 Fe 35 Mn 15 Ni 35 . The alloys showed promising strength in tensile deformation at room temperature, with yield strengths of 155 MPa and 151 MPa for Cr 18 Fe 27 Mn 27 Ni 28 and Cr 15 Fe3 5 Mn 15 Ni 35 , respectively. At 500 °C, the yield strength of Cr 18 Fe 27 Mn 27 Ni 28 fell to 93 MPa, and to 100 MPa in Cr 15 Fe3 5 Mn 15 Ni 35 . Unlike Cr 18 Fe 27 Mn 27 Ni 28 , Cr 15 Fe 35 Mn 15 Ni 35 gained some ductility at 500 °C compared to room temperature. The two CSAs were irradiated to 75 dpa at 500 °C in the plateau region of the displacement curve using 3.7 MeV Ni 2+ ions, alongside model alloy 709 as a reference. Irradiation results produced similar densities and sizes of dislocations loops in the two CSAs compared to the reference. However, while large voids form in the plateau region of Cr 18 Fe 27 Mn 27 Ni 28 , small voids form just beyond the displacement peak of Cr 15 Fe 35 Mn 15 Ni 35 . Atom probe tomography and energy dispersive X-ray spectroscopy-equipped scanning transmission electron microscopes were used to characterize the alloys for changes in chemical distribution.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2021

Nuclear Data Sheets for A=123

Experimental nuclear structure and decay data are evaluated for all of 15 known nuclides of mass 123 (Ru, Rh, Pd, Ag, Cd, In, Sn, Sb, Te, I, Xe, Cs, Ba, La, Ce). For each nuclide, detailed evaluated spectroscopic information is presented in each reaction and decay, and the best values combining all available data are recommended for level properties, γ and β radiations, and other spectroscopic properties. No excited states have been identified in 123 Ru, 123 Rh and 123 Pd. For 123 Ag, the long-predicted 1/2 – β-emitting isomer has been identified at 60-keV by 2019Ch24 recently, resolving unknown excitation energies in the level scheme that was previously available only from isomeric decays of two isomers (202 ns and 393 ns) with the position and spin-parity of the former remaining unknown. Significant discrepancies exist between data on high-spin sequences based on 11/2 (–) isomer in 123 Cd (2002Hw01 and 2016Re05), which needs to be resolved with further experimental investigation. In 123 Cs, the 114-ns isomer as the πg 9/2 bandhead proposed at 231.6+x by 2000Gi12 has been resolved by 2004Si26 and 2004Si27 to be the 328-keV level that is proposed by 2000Gi12 as a separate level. Excited states in 123 La and 123 Ce have only been studied via (HI, xnγ) reactions, with their base levels and thus excitation energies remaining unknown. The β– decay schemes for daughter nuclide 123 Cd, 123 In and 123 Sn and the ε decay schemes for 123 Xe, 123 Cs and 123 Ba are considered incomplete due to large gaps between the highest observed excited levels and the Q-values. 123 Sn, 123 Sb, 123 Te and 123 I are the most extensively studied nuclides via various reactions and decays. Furthermore, this work supersedes earlier full evaluations of A=123 by 2004Oh11, 1993Oh12, 1980Ta02 and 1972Au10.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2020

α Irradiation Response on the Electronic Transport Properties of p -B 12 P 2

B 12 P 2 , a wide bandgap semiconductor, has been previously reported to self-heal from high-energy electron bombardment as determined from transmission electron microscopy. However, the effect of irradiation on the electronic transport properties of B 12 P 2 has not been studied. We report electrical transport measurements on B 12 P 2 after α irradiation. The temperature-dependent Hall effect was measured on p-type B 12 P 2 after successive α irradiation from 210 Po over a fluence range of 1 × 10 11 –1 × 10 13 α/cm 2 to test for self-healing of B 12 P 2 to α bombardment. Prior to irradiation, B 12 P 2 displayed electrical transport characteristics of both hopping and impurity/defect band conduction due to background impurities and growth-induced defects. Fluences of 5 × 10 12 α/cm 2 or greater caused a decrease in the hole mobility and an increase in defect band conduction, suggesting defect accumulation in B 12 P 2 .

36 MATERIALS SCIENCE↗
DOE OSTI2021

Critical cooling rates for amorphous-to-ordered complexion transitions in Cu-rich nanocrystalline alloys

Amorphous complexions in nanocrystalline metals have the potential to improve mechanical properties and radiation tolerance, as well as resistance to grain growth. In this study, the stability of amorphous complexions in binary and ternary Cu-based alloys is investigated by observing the effect of cooling rate from high temperature on the occurrence of amorphous-to-ordered complexion transitions. Bulk Cu-Zr and Cu-Zr-Hf alloy samples were annealed to induce boundary premelting and then quenched through a procedure that induces a gradient of local cooling rate through the sample height. Amorphous complexion thickness distributions were found to be invariant to local cooling rate in the Cu-Zr-Hf alloy, demonstrating enhanced stability of the amorphous complexion structure compared to the Cu-Zr alloy, which had thinner amorphous complexions in the regions that were slowly cooled. The experimental results are used to construct time-temperature-transformation diagrams for the amorphous-to-ordered complexion transition in both the binary and ternary alloys, enabling a deeper understanding of the influence of cooling rate and grain boundary chemistry on complexion transitions. In conclusion, the critical cooling rate necessary to avoid complexion transitions in the ternary alloy is found to be at least three orders of magnitude slower than that for the binary alloy.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Protection of graphite from salt and gas permeation in molten salt reactors

The reactor core, moderator and reflectors of a thermal spectrum advanced molten salt reactor will constitute multi-tons of graphite. Porous reactor-grade graphite, if unprotected, can be permeated by molten salt depending on the infiltrating pressure differential and entrance diameters of accessible graphite pores. Salt and gas permeation of graphite can affect microstructural properties and radiation behavior but also facilitate diffusion, deposition and retention of fission products and tritium. Because of the significant void volume of nuclear graphite, fission products and tritium retention due to salt permeation necessitates seal coatings or pore impregnation to reduce open porosity. Alternatively, very fine-grained graphite grades with low Xe permeability are being developed. In this work, we survey the current technologies for mitigating salt and gas transport into graphite.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Experimental and numerical investigation of ester droplet combustion: Application to butyl acetate

This paper presents an experimental and numerical study of the combustion of isolated n–butyl acetate droplets in the standard atmosphere. Numerical simulations are reported using a model that incorporates unsteady gas and liquid transport, variable properties, and radiation. Three skeletal mechanisms of n-butyl acetate, derived from a large detailed mechanism comprised of 819 species and 52,698 reactions, were used in the numerical simulations to evaluate the influence of the kinetic mechanism on burning. The reduced mechanisms comprised 212 species and 5413 reactions, 157 species and 3089 reactions, and 105 species and 1035 reactions. The numerical model did not include soot formation, though qualitatively mild sooting was noted only for droplets larger than 0.7 mm. The numerical predictions were in good agreement with experimental measurements of droplet and flame diameters. Flame extinction was numerically predicted which was attributed to a decrease of the characteristic diffusion time relative to the chemical time as droplet burned. Effects of initial droplet diameter on the evolution of maximum gas temperature (T max ) and peak mole fractions of CO 2 and CO are also examined numerically.

09 BIOMASS FUELS↗
DOE OSTI2020

Fast Organic Vapor Phase Deposition of Thin Films in Light-Emitting Diodes

Fast deposition of thin films is essential for achieving low-cost, high throughput phosphorescent organic light emitting diode (PHOLED) production. In this work, we demonstrate rapid and uniform growth of semiconductor thin films by organic vapor phase deposition (OVPD). A green PHOLED comprising an emission layer (EML) grown at 50 Å/s with bis[2-(2-pyridinyl-N)phenyl-C](acetylacetonato)iridium(III) (Ir(ppy)2(acac)) doped into 4,4 bis(N-carbazolyl)-1,1zolylld (CBP) exhibits a maximum external quantum efficiency of 20 ± 1%. The morphology, charge transport properties, and radiative efficiency under optical and electrical excitation of the PHOLED EML are investigated as functions of the deposition rate via both experimental and theoretical approaches. The EML shows no evidence for gas phase nucleation of the organic molecules at deposition rates as high as 50 Å/s. However, the roll-off in quantum efficiency at high current progressively increases with deposition rate due to enhanced triplet-polaron annihilation. The roll-off results from accumulation of stress within the PHOLED EML that generates a high density of defect states. Here, the defects, in turn, act as recombination sites for triplets and hole polarons, leading to enhanced triplet-polaron annihilation at high current. We introduce a void nucleation model to describe the film morphology evolution that is observed using electron microscopy.

42 ENGINEERING↗
DOE OSTI2022

Parameterization of cloud transmittance for expeditious assessment and forecasting of all-sky DNI

Radiative transfer models require vast computing resources to solve cloud transmittance and reflectance from the radiative transfer equation. As a result, models offering precise simulation in operations often acquire individual cloud transmittance or reflectance from a lookup table precomputed for practicable scenarios. To further expedite the computation of global horizontal irradiance and to reduce the storage requirements, the Fast All-sky Radiation Model for Solar applications (FARMS) parameterized the lookup table using elementary functions with specified coefficients. This study extends FARMS direct normal irradiance (DNI) computation by utilizing hyperbolic tangent functions and various polynomial functions to parameterize the cloud transmittance for scattered solar radiation in the circumsolar region. The parameterization is implemented in FARMS with DNI (FARMS-DNI) and accounts for the circumsolar radiation when assessing or forecasting DNI. The evaluation, with long-term observations at the National Renewable Energy Laboratory's, Solar Radiation Research Laboratory, and the Atmospheric Radiation Measurement, Southern Great Plains, Central Facility, shows that the parameterized DNIs are virtually identical with those computed by coupling FARMS-DNI to a lookup table of cloud transmittance. This parameterization has diverse applications in radiative transfer models and numerical weather prediction models used to assess or forecast direct solar radiation.

14 SOLAR ENERGY↗
DOE OSTI2023

In situ measurements of non-equilibrium positron state defects during He irradiation in Si

Radiation-induced property changes in materials originate from the energy transfer from an incoming particle to the existing lattice, displacing atoms. The displaced atoms can cause the formation of extended defects including dislocation loops, voids, or precipitates. The non-equilibrium defects created during damage events determine the extent of these larger defects and are a function of dose rate, material, and temperature. However, these defects are transient and can only be probed indirectly. Herein, we present direct experimental measurements and evidence of irradiated non-equilibrium vacancy formation, where in situ positron annihilation spectroscopy was used to prove the generation of non-equilibrium defects in silicon.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Thermomechanical Properties of Hafnium Hydride for Radiation Shielding in Tokamak Devices

The development of effective neutron shielding materials is of paramount importance for the progression of fusion technologies with the aim of producing clean and sustainable energy for future generations. This study demonstrates the successful fabrication of a promising candidate material for shielding applications, hafnium hydride, through the powder metallurgy process. Powder metallurgy fabrication resulted in the production of 91% dense, crack-free, ε-phase HfH 2 pellets with a hydrogen-to-metal ratio of 1.89 to 2.00. Resonant ultrasound spectroscopy (RUS) was used to measure a Young’s modulus of 34.52 ± 2.70 GPa and a shear modulus of 12.25 ± 0.18 GPa. Nanoindentation techniques have been used to establish a hardness value of 4.45 ± 1.63 GPa, and a Young’s modulus of 47.8 ± 6.4 GPa was determined using Poison’s ratio from RUS. Hydrogen release was measured using thermogravimetric analysis and appeared to occur in three different regimes as the sample transitioned through the ε- and δ-phases. Heat capacity matched literature data up to 600 K, after which a rapid increase was observed due to phase transformations occurring with hydrogen loss.

Hafnium hydride↗
DOE OSTI2021

Revisiting Theoretical Limits for One Degree-of-Freedom Wave Energy Converters

This work revisits the theoretical limits of one degree-of-freedom wave energy converters (WECs). This work considers the floating sphere used in the OES Task 10 WEC modeling and verification effort for analysis. Analytical equations are derived to determine bounds on displacement amplitude, time-averaged power (TAP), and power-take-off (PTO) force. A unique result found shows that the TAP absorbed by a WEC can be defined solely by the inertial properties and radiation hydrodynamic coefficients. In addition, a unique expression for the PTO force was derived that provides lower and upper bounds when resistive control is used to maximize power generation. For complex conjugate control, this same expression only provides a lower bound, as there is theoretically no upper bound. These bounds assist in comparing the performance of the floating sphere if it were to extract energy using surge or heave motion. The analysis shows because of differences in hydrodynamic coefficients for each oscillating mode, there are different frequency ranges that provide better power capture efficiency. The influence of a motion constraint on TAP while utilizing a nonideal power take-off is examined and found to reduce the losses associated with bidirectional energy flow. The expression to calculate TAP with a nonideal PTO is modified by the electrical conversion efficiency and the ratio of the PTO spring and damping coefficients. Furthermore, the PTO spring and damping coefficients were separated in the expression, allowing for limits to be set on the PTO coefficients to ensure net power generation.

16 TIDAL AND WAVE POWER↗
DOE OSTI2020

Revisiting Theoretical Limits for One-Degree-of-Freedom Wave Energy Converters

This work revisits the theoretical limits of one-degree-of-freedom wave energy converters. This paper considers the floating sphere used in the Ocean Energy Systems Task 10 Wave Energy Converter modeling and verification effort for analysis. Analytical equations are derived to determine bounds on the motion amplitude, time-averaged power, and power-take-off (PTO) force. A unique result was found that shows the time-averaged power absorbed by a wave energy converter can be defined solely by the inertial properties and radiation hydrodynamic coefficients. In addition, a unique expression for the PTO force amplitude was derived that has provided upper and lower bounds when resistive control is used to maximize power generation. For complex conjugate control, this same expression can only provide a lower bound, as there is theoretically no upper bound. These bounds are used to compare the performance of a floating sphere if it were to extract energy using surge or heave motion. The analysis shows that because of the differences in hydrodynamic coefficients of each oscillating mode, there will be different frequency ranges that provide better power capture efficiency. The influence of a motion constraint on power absorption while also utilizing a nonideal power take-off is examined and found to reduce the losses associated with bidirectional energy flow. The expression to calculate the time-averaged power with a nonideal PTO is modified by the mechanical-to-electrical efficiency and the ratio of the PTO spring and damping coefficients. The PTO spring and damping coefficients were separated in the expression, which allows for limits to be set on the possible values of PTO coefficients to ensure a net flow of power to the grid.

50 EE - Wind and Water Power Program - Water (EE-4↗
DOE OSTI2023

ESS-DIVE Unoccupied Aerial Systems (UAS) Reporting Format v1

Here we present documentation of the ESS-DIVE reporting format for Unoccupied Aerial System (UAS) data and metadata. This reporting format provides guidance to data contributors on how to store data to maximize their discoverability, facilitate their efficient reuse, and add value to individual datasets. For data users, the reporting format will better allow data repositories to optimize data search and extraction, and more readily integrate similar data into harmonized synthesis products. The reporting format provides templates and guidance for the reporting of metadata for UAS experimental campaigns, individual flights, platform and sensor description. To improve data access and discoverability, the reporting format proposes a data description scheme of Levels based on the degree of processing, where Level 0 includes raw data, through to Level 3 being derived data end products. A range of examples of data types for each Level are given, with suggested file naming schemes. The reporting format presented here is intended to form a foundation for future development that will accommodate new UAS technologies and approaches to data access and use in the future. The reporting format documentation is maintained and updated on the ESS-DIVE Community Space GitHub at https://github.com/ess-dive-community/essdive-uas. This data package is the first published version of this reporting format, and comprises a zip file of the complete content of https://github.com/ess-dive-community/essdive-uas v1.0. The zip contains the reporting format description, instructions and variable definitions in GitHub markdown language (*.md) and metadata templates in csv format. The reporting format is designed to be compatible with other ESS-DIVE formats, and it is specifically recommended that this reporting format be used in conjunction with the File-level metadata (FLMD) and comma separated values (csv) reporting formats for submission to the ESS-DIVE repository.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

UAS remote sensing (AltaX platform): Red-green-blue (RGB) imagery, thermal infrared (TIR) imagery, and canopy reflectance (Level 0 data), Seward Peninsula, Alaska, 2023

Airborne remote sensing data collected using Brookhaven National Laboratory’s (BNL) heavy-lift unoccupied aerial system (UAS) AltaX platform on the Seward Peninsula, Alaska, USA. This package includes raw (L0) data from 11 flights flown over the NGEE-Arctic Kougarok mile marker 64 (MM64) and Teller MM 27 sites in July, 2023. The AltaX is a multi-sensor UAS platform that simultaneously measures very high spatial resolution optical red/green/blue (RGB) and thermal infrared (TIR) surface “skin” temperature imagery, as well as near-surface surface reflectance at 1 nm intervals in the visible to near-infrared spectral range from ~350 – 1000 nm. This package provides the Level 0 (raw, unprocessed) data collected by the platform and sensors. Ancillary aircraft data, flight mission parameters, and general flight conditions provided by the onboard flight and data collection computers are also included. Data and metadata are provided as text (*.txt, *.json), binary (*.dat, *.ulg), tabular (*.csv), geospatial (*.kml. *kmz), image (*.jpg, *.png, *.tif) and pdf formats. The metadata documents contain flight campaign, platform, sensor, flight and file metadata, along with a description of the L0 data and the file naming scheme.The Next-Generation Ecosystem Experiments: Arctic (NGEE Arctic), was a 15-year research effort (2012-2027) to reduce uncertainty in Earth System Models by developing a predictive understanding of carbon-rich Arctic ecosystems and feedbacks to climate. NGEE Arctic was supported by the Department of Energy's Office of Biological and Environmental Research.The NGEE Arctic project had two field research sites: 1) located within the Arctic polygonal tundra coastal region on the Barrow Environmental Observatory (BEO) and the North Slope near Utqiagvik (Barrow), Alaska and 2) multiple areas on the discontinuous permafrost region of the Seward Peninsula north of Nome, Alaska.Through observations, experiments, and synthesis with existing datasets, NGEE Arctic provided an enhanced knowledge base for multi-scale modeling and contributed to improved process representation at global pan-Arctic scales within the Department of Energy's Earth system Model (the Energy Exascale Earth System Model, or E3SM), and specifically within the E3SM Land Model component (ELM).

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

UAS remote sensing (AltaX platform): Red-green-blue (RGB) imagery, thermal infrared (TIR) imagery, and canopy reflectance (Level 0 data), Seward Peninsula, Alaska, 2022

Airborne remote sensing data collected using Brookhaven National Laboratory’s (BNL) heavy-lift unoccupied aerial system (UAS) AltaX platform on the Seward Peninsula, Alaska, USA. This package includes raw (L0) data from 10 flights flown over the NGEE-Arctic Kougarok mile marker 64 (MM64) and Teller MM 27 sites in July, 2022. The AltaX is a multi-sensor UAS platform that simultaneously measures very high spatial resolution optical red/green/blue (RGB) and thermal infrared (TIR) surface “skin” temperature imagery, as well as near-surface surface reflectance at 1 nm intervals in the visible to near-infrared spectral range from ~350 – 1000 nm. This package provides the Level 0 (raw, unprocessed) data collected by the platform and sensors. Ancillary aircraft data, flight mission parameters, and general flight conditions provided by the onboard flight and data collection computers are also included. Data and metadata are provided as text (*.txt, *.json), binary (*.dat, *.ulg), tabular (*.csv), geospatial (*.kml. *kmz), image (*.jpg, *.png, *.tif) and pdf formats. The metadata documents contain flight campaign, platform, sensor, flight and file metadata, along with a description of the L0 data and the file naming scheme.The Next-Generation Ecosystem Experiments: Arctic (NGEE Arctic), was a 15-year research effort (2012-2027) to reduce uncertainty in Earth System Models by developing a predictive understanding of carbon-rich Arctic ecosystems and feedbacks to climate. NGEE Arctic was supported by the Department of Energy's Office of Biological and Environmental Research.The NGEE Arctic project had two field research sites: 1) located within the Arctic polygonal tundra coastal region on the Barrow Environmental Observatory (BEO) and the North Slope near Utqiagvik (Barrow), Alaska and 2) multiple areas on the discontinuous permafrost region of the Seward Peninsula north of Nome, Alaska.Through observations, experiments, and synthesis with existing datasets, NGEE Arctic provided an enhanced knowledge base for multi-scale modeling and contributed to improved process representation at global pan-Arctic scales within the Department of Energy's Earth system Model (the Energy Exascale Earth System Model, or E3SM), and specifically within the E3SM Land Model component (ELM).

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

Canopy reflectance spectra and photographs (raw data), Seward Peninsula, Alaska, 2022

Measurements of full-range (350–2500 nm) canopy spectral reflectance of Arctic plant species, plots, and transects at the Next Generation Ecosystem Experiment Arctic (NGEE Arctic) Teller Mile Marker (MM27) and Kougarok Fire Complex (KFC) sites, Seward Peninsula, Alaska. Spectra were collected in July 2022 using a handheld SVC HR-2014i spectroradiometer. All spectra were collected as calibrated surface radiance and converted to surface reflectance using 99.99% reflective Spectralon white reference standard. This data package includes unprocessed instrument output of the spectra signals (.sig) and, for some canopy measurements, photographs of the target taken by the SVC instrument camera or handheld digital camera (.jpg), GPS locations and file metadata (.csv).The Next-Generation Ecosystem Experiments: Arctic (NGEE Arctic), was a 15-year research effort (2012-2027) to reduce uncertainty in Earth System Models by developing a predictive understanding of carbon-rich Arctic ecosystems and feedbacks to climate. NGEE Arctic was supported by the Department of Energy's Office of Biological and Environmental Research.The NGEE Arctic project had two field research sites: 1) located within the Arctic polygonal tundra coastal region on the Barrow Environmental Observatory (BEO) and the North Slope near Utqiagvik (Barrow), Alaska and 2) multiple areas on the discontinuous permafrost region of the Seward Peninsula north of Nome, Alaska.Through observations, experiments, and synthesis with existing datasets, NGEE Arctic provided an enhanced knowledge base for multi-scale modeling and contributed to improved process representation at global pan-Arctic scales within the Department of Energy's Earth system Model (the Energy Exascale Earth System Model, or E3SM), and specifically within the E3SM Land Model component (ELM).

54 ENVIRONMENTAL SCIENCES↗