Engineering Papers⌕ Search

DOE OSTI · 1831118

Nuclear Data Sheets for A=123

Abstract

Experimental nuclear structure and decay data are evaluated for all of 15 known nuclides of mass 123 (Ru, Rh, Pd, Ag, Cd, In, Sn, Sb, Te, I, Xe, Cs, Ba, La, Ce). For each nuclide, detailed evaluated spectroscopic information is presented in each reaction and decay, and the best values combining all available data are recommended for level properties, γ and β radiations, and other spectroscopic properties. No excited states have been identified in 123 Ru, 123 Rh and 123 Pd. For 123 Ag, the long-predicted 1/2 – β-emitting isomer has been identified at 60-keV by 2019Ch24 recently, resolving unknown excitation energies in the level scheme that was previously available only from isomeric decays of two isomers (202 ns and 393 ns) with the position and spin-parity of the former remaining unknown. Significant discrepancies exist between data on high-spin sequences based on 11/2 (–) isomer in 123 Cd (2002Hw01 and 2016Re05), which needs to be resolved with further experimental investigation. In 123 Cs, the 114-ns isomer as the πg 9/2 bandhead proposed at 231.6+x by 2000Gi12 has been resolved by 2004Si26 and 2004Si27 to be the 328-keV level that is proposed by 2000Gi12 as a separate level. Excited states in 123 La and 123 Ce have only been studied via (HI, xnγ) reactions, with their base levels and thus excitation energies remaining unknown. The β– decay schemes for daughter nuclide 123 Cd, 123 In and 123 Sn and the ε decay schemes for 123 Xe, 123 Cs and 123 Ba are considered incomplete due to large gaps between the highest observed excited levels and the Q-values. 123 Sn, 123 Sb, 123 Te and 123 I are the most extensively studied nuclides via various reactions and decays. Furthermore, this work supersedes earlier full evaluations of A=123 by 2004Oh11, 1993Oh12, 1980Ta02 and 1972Au10.

Explore related subjects

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Chen, Jun. 2021-06-04. Nuclear Data Sheets for A=123. https://doi.org/10.1016/j.nds.2021.05.001

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related reports

Design-informed neutronics assessment of long-lived fission product transmutation in a tokamak fusion reactor blanket

This study presents a neutronics-based assessment of the feasibility and viability of transmuting six major long-lived fission products (LLFPs) from light-water reactors, namely 99 Tc, 129 I, 79 Se, 93 Zr, 126 Sn, and 135 Cs, within the blanket region of a tokamak fusion reactor, using the MIT ARC design as a concrete fusion configuration. Monte Carlo neutronics simulations were performed to evaluate LLFP transmutation and to compare the results with a reference boiling water reactor (BWR). The results indicate that transmutation of all six LLFPs is neutronics-feasible in fusion reactors, with transmutation half-lives significantly shorter than their natural decay half-lives. For elemental targets, transmutation of 135 Cs, 126 Sn, and 93 Zr was found potentially viable, as the net mass transmuted exceeded that achievable in the reference BWR under identical target volume and irradiation time. When isotopically separated targets were considered, transmutation of 126 Sn and 93 Zr appeared potentially viable. A parametric study demonstrated that plasma geometry modifications can enhance local neutron flux, increasing the transmuted 93 Zr mass by approximately 33% and reducing the transmutation half-life from approximately 240 years to 180 years. Repositioning the target and adjusting material layer thickness reduced the transmutation half-life of 93 Zr to 67 years and increased the net mass transmuted by a factor of 50. Furthermore, these results demonstrate that fusion reactors can enable LLFP transmutation beyond the practical limits of thermal fission reactors and highlight the critical role of reactor and blanket design optimization. Engineering and fuel-cycle considerations required for deployment are beyond the scope of this neutronics-focused study.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

A hybrid Monte Carlo-deterministic second moment method with efficient variance reduction

In this work, we present a hybrid method that combines Monte Carlo with deterministic finite element methods to solve a linear Boltzmann transport equation. Our hybrid method runs orders of magnitude faster than Monte Carlo, without sacrificing accuracy, for a proxy problem from radiative transfer that contains both optically-thick and optically-thin material. We believe that this is the first demonstration of a hybrid Second Moment Method in more than one spatial dimension, the first to consider more than one material, and the first to use variance reduction. Our variance reduction approach arises from an asymptotic analysis in which we show that the magnitude of the scattering source grows without bound. We transform the problem to compute the deviation of the radiation intensity from isotropy. The magnitude of the source in the transformed problem is bounded, and the quality of the hybrid method solution is dramatically improved by a substantial reduction in the variance.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗