Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Milling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 883 records · Page 49
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Investigating microstructural evolution in SolidStir™ extruded oxide dispersion strengthened 14YWT alloy fuel cladding tube

Structural components for extreme environments require advanced materials and manufacturing processes. One such advanced material is oxide dispersion strengthened (ODS) Fe–14 wt.%Cr–3W–0.4Ti–0.3Y 2 O 3 (14YWT), which is developed for components to be used in Gen IV and fusion nuclear reactors. However, the conventional manufacturing processes to produce components, such as fuel cladding tubes, either do not retain the desired microstructural attributes or are costly and less efficient. As a result, a more attractive option is a novel manufacturing process developed on the principle of friction stir welding or processing (FSW/P) and commercially referred to as SolidStir™ Extrusion (SSE). Here this study used the SSE technique to study the manufacturing and microstructural evolution of a fuel cladding tube made of ODS 14YWT alloy. The cladding extrusion by the SSE technique involved the use of ball-milled 14YWT powders with Y, Ti, and O in the solid solution and the use of a specially designed W-25Re-Hf tool for consolidation and extrusion of the powders. A scanning electron microscope (SEM), electron backscattered diffraction (EBSD), and transmission electron microscope (TEM) were utilized for microstructural characterization. A Keyence microscope captured macrostructural photographs of the extruded tube. EBSD examination of the extruded tube on both transverse and longitudinal cross-sections showed the presence of dynamically recrystallized grains and revealed that the average grain size of the transverse cross-section was smaller than that of the longitudinal cross-section. The texture was weak and consisted of some amount of shear texture. The presence of nano-oxide clusters or precipitates of Y, Ti, and O (pyrochlores) in the extruded tube was determined by TEM. Aging heat treatment caused the average precipitate size to decrease and the density to increase compared to the as-processed condition. The results indicated that SSE is a viable tool for manufacturing fuel cladding tubes with the desired microstructural attributes.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2024

Manufacturing Oxide Dispersion Strengthened (ODS) steel plate via cold spray and friction stir processing

Oxide dispersion strengthened (ODS) steels, traditionally fabricated by ball milling and conventional powder metallurgy techniques to achieve bulk form, followed by intricate rolling and thermal treatment steps to achieve plate or sheet form. Here, we present a novel processing route that combines cold spray (CS) with friction stir processing (FSP) to manufacture ODS steel plate directly from gas atomization reaction synthesis (GARS)-prepared powder, thus no rolling steps involved. Microstructural and mechanical characterizations were performed to assess the quality and properties of the resulting ODS steel plate. Our findings demonstrate that the slightly porous CS deposited layer was fully consolidated after FSP, yielding a fully dense ODS steel plate that exhibited a favorable tradeoff between strength and ductility upon extraction from the substrate. Furthermore, through microstructural analysis, we revealed the presence of an appreciable density (∼10 22 /m 3 ) of nano-sized oxide particles, with the majority being smaller than 5 nm via the combined CS + FSP fabrication route. This work serves as a first proof-of-concept demonstration of the manufacturing approach described herein, offering a possible alternative route for producing ODS steel plates.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Optimization of catholyte for halide-based all-solid-state batteries

Halide solid electrolytes gain significant attention due to their high ionic conductivity, low processing temperature, dry air compatibility, and high-voltage stability. However, low cathode active material (CAM) loading in the composite cathode constrains the realization of high energy density for halide-based all-solid-state batteries. In this study, three halide materials, raw Li 3 YBrCl 5 (LYBC-R, <30μm), milled LYBC (LYBC-M, <5 μm) and freeze-dried Li 3 InCl 6 (LIC, <500 nm), were used as catholytes, combined with LYBC-M as the electrolyte and LiIn alloy as the anode. The CAM:catholyte ratio was investigated as well as stack pressure and operating temperature. Our study demonstrates that particle size of the catholyte plays an important role only for high CAM loading or high C-rate cycling. At moderate CAM loading (65 and 70wt% LiNi 0.83 Mn 0.06 Co 0.11 O 2 ) and 0.1 C-rate, all the three catholytes perform well, providing initial discharge capacities >177 mAh/g. At high CAM loading (85wt%) and 0.1 C-rate, a cathode with the nano-scale LIC catholyte provides discharge capacity of 175 mAh/g, while the larger particle size catholytes suffer significantly reduced capacity. Both LYBC and LIC catholytes provided capacity retention >80% after 200 cycles at 0.5C. These results imply that cathode particle size is critically important for performance at high CAM loading. Furthermore, both electrolyte and cathode were tape cast to scale up size and prepare realistic layer thicknesses. A small amount of binder was used in both layers, to balance the electrochemical performance and mechanical properties. Further, the discharge capacity of a tape cell was 152mA h/g at 0.1C with a capacity retention of 81.8% after 20 cycles at 0.5C. The results demonstrate the excellent performance of LYBC as an electrolyte, and provide guidance for halide-based cathode design.

25 ENERGY STORAGE↗
DOE OSTI2023

Identifying common stored product insects using automated deep learning methods

Monitoring stored product insect pests is a common practice for post-harvest management of stored grain and grain-based commodities, which helps ensure product quality from harvest to final consumer. Current methods of sampling and monitoring can be time-consuming, labor-intensive, expensive and require expertise in insect identification. Therefore, this study aims to develop an image-based automated identification system for common stored product insect species using deep-learning methods. Top-down images of the common stored product adult insect species of Rhyzopertha dominica, Cryptolestes ferrugineus, Tribolium castaneum, Sitophilus oryzae, and Oryzaephilus surinamensis were acquired and analyzed. Deep learning-based, state-of-the-art Convolutional Neural Networks (CNN) models (ResNet-50, MobileNet-v2, DarkNet-53, and EfficientNet-b0) were fine-tuned with a transfer learning approach to classify the insect species. All models were able to correctly identify the insect species with at least 96% accuracy and with few misclassifications. One issue with trained CNNs is that they do not explain the reasoning for the classification and are often called a “black box”. Therefore, visualization methods called Gradient-weighted Class Activation Mapping (Grad-CAM) were implemented to explore the black box network. The Grad-CAM uses heat maps to highlight the major image features that the network focused on to make insect species predictions. The Grad-CAM verifies the network's prediction and also helps improve network performance. This study contributes to the overall goal of developing a camera-based system for monitoring stored grain insects. As a result, the developed system would empower warehouse, flour mills, and other food facilities with a tool to quickly and accurately identify insect species in stored product environments and could be implemented as part of a close to real-time monitoring system.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2021

Investigation of interfacial structures for hybrid manufacturing

Hybrid manufacturing is a combination of additive and subtractive manufacturing in a single machine. Typically, planar substrate substrates are used for deposition and do not correspond to scenarios encountered in repair applications where the substrate can often be non-planar. Hybrid manufacturing opens the possibility for repairs by leveraging the five-axis mill to prepare the substrate for deposition. However, as the substrate geometry changes, so does the associated heat transfer during deposition and subsequent microstructures. This paper focuses on understanding the changes in microstructure and material properties with changing substrate geometries.

36 MATERIALS SCIENCE↗
DOE OSTI2020

In Situ Investigation of Chemomechanical Effects in Thiophosphate Solid Electrolytes

Solid-state batteries can suffer from catastrophic failure at high current densities due to solid electrolyte fracture, interface decomposition, or lithium filament growth. Failure is linked to chemomechanical material transformations that can manifest during electrochemical cycling. We systematically investigate how solid electrolyte microstructure and interfacial decomposition (e.g., interphase) affect failure mechanisms in lithium thiophosphates (Li3PS4, LPS) electrolytes. Kinetically metastable interphases are engineered with iodine doping, and microstructural control is achieved using milling and annealing processing techniques. In situ transmission electron microscopy reveals iodine diffusion to the interphase, and upon electrochemical cycling, pores are formed in the interphase region. In situ synchrotron tomography reveals that interphase pore formation drives edge fracture events, which are the origin of through-plane fracture failure. Fractures in thiophosphate electrolytes actively grow toward regions of higher porosity and are affected by heterogeneity in microstructure (e.g., porosity factor). This report provides fundamental design guidelines for high-performance solid-state batteries.

25 ENERGY STORAGE↗
DOE OSTI2026

Improved manufacturability of vacuum thermoforming molds by segmentation

Thin polymer shell components used in consumer goods, the automotive industry, and marine applications are often produced by thermoforming. Depending on the quantity of parts, molding processes can increase throughput significantly when compared to processes such as milling or additive manufacturing. One disadvantage to mold-based manufacturing methods, however, is that molds must be produced to form the required geometry. Mold production is often complex and requires a large capital investment. For large-scale molding processes, mold production is sometimes complicated by the requirement for large working volume machine tools which are capable of machining the cavities to the appropriate tolerances for the selected molding process. Here, this paper focuses on a segmented design for a large draw ratio (>3:1 molded surface area to sheet surface area) thermoforming mold and a cost-benefit analysis of segmentation versus monolithic design. Discussion of the thermoforming tests are included. The primary goals were to improve manufacturability and reduce the overall cost of the mold.

Manufacturability↗
DOE OSTI2022

Transformation of a ceramic precursor to a biomedical (metallic) alloy: Part I – sinterability of Ta 2 O 5 and TiO 2 mixed oxides

Mixed Ta 2 O 5 – TiO 2 binary system was studied by a combination of differential thermal analysis (DTA), scanning electron microscopy-energy dispersive spectrometry (SEM-EDS), X-ray diffraction (XRD) and in situ high temperature X-ray diffraction (HT-XRD) techniques. Different compositions of the mixed oxide powders were fabricated by ball–milling the powdered compositions, pelletizing the homogenized composite powders, and heating the green pellets in air at different temperatures for fixed time intervals. The sintered pellets were evaluated and characterized with respect to porosity, morphology, and phase distribution. DTA runs of the un-sintered powders indicated the onset temperatures for both exothermic and endothermic changes in the binary system. Significant amount of sintering was observed to take place at temperatures higher than 900 °C. Both room and high temperature X-ray diffraction patterns exhibited consistency in phase formation. A ternary compound (TaTiO 4 ) and a ternary solid solution (Ti 0.33 Ta 0.67 O 2 ) were observed to form in both room and high temperatures in addition to the respective binary phases (Ta 2 O 5 and TiO 2 ). A sintering temperature in the range 900–1000 °C was observed to be adequate to achieve the requisite mechanical strength and optimum internal porosity (40–48%) for subsequent electrochemical polarization experiments.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Solid-state dewetting instability in thermally-stable nanocrystalline binary alloys

Practical applications of nanocrystalline metallic thin films are often limited by instabilities. Furthermore, in addition to grain growth, the thin film itself can become unstable and collapse into islands through solid-state dewetting. Additionally, selective alloying can improve nanocrystalline stability, but the impact of this approach on dewetting is not clear. In this study, two alloys that exhibit nanocrystalline thermal stability as ball milled powders are evaluated as thin films. While both alloys demonstrated dewetting behavior following annealing, the severity decreased in more dilute compositions. Ultimately, a balance may be struck between nanocrystalline stability and thin film structural stability by tuning dopant concentration.

36 MATERIALS SCIENCE↗
DOE OSTI2020

A practical phosphorus-based anode material for high-energy lithium-ion batteries

State-of-the-art lithium-ion batteries cannot satisfy the increasing energy demand worldwide because of the low specific capacity of the graphite anode. Silicon and phosphorus both show much higher specific capacity; however, their practical use is significantly hindered by their large volume changes during charge/discharge. Although significant efforts have been made to improve their cycle life, the initial coulombic efficiencies of the reported Si-based and P-based anodes are still unsatisfactory (<90%). In this study, by using a scalable high-energy ball milling approach, we report a practical hierarchical micro/nanostructured P-based anode material for high-energy lithium-ion batteries, which possesses a high initial coulombic efficiency of 91% and high specific capacity of ~2500 mAh g –1 together with long cycle life and fast charging capability. In situ high-energy X-ray diffraction and in situ single-particle charging/discharging were used to understand its superior lithium storage performance. Moreover, proof-of-concept full-cell lithium-ion batteries using such an anode and a LiNi 0.6 Co 0.2 Mn 0.2 O 2 cathode were assembled to show their practical use. The findings presented here can serve as a good guideline for the future design of high-performance anode materials for lithium-ion batteries.

25 ENERGY STORAGE↗
DOE OSTI2022

Preparation and characterization of isotopically pure Mo targets for nuclear science measurements

Isotopically pure molybdenum targets are essential in various nuclear science measurements. For studies of cross sections of capture reactions on molybdenum, uniform targets with areal densities of hundreds of g/cm 2 are desired. Mechanical rolling of enriched metal pieces or vacuum sputtering methods used in previous studies to prepare molybdenum targets are challenging and involve labor- and time-intensive processes. Therefore, reliable and straightforward methods to produce molybdenum targets are crucial. We have developed a new double-step method to produce targets meeting these needs. The first step consists of evaporating isotopically enriched MoO 3 onto gold backings. The second step involves the reduction of the oxide layer in a 5% H 2 -Ar environment to obtain molybdenum targets. X-ray fluorescence (XRF) spectroscopy, X-ray Diffraction (XRD), a scanning electron microscope/focused ion beam milling, and energy-dispersive X-ray spectroscopy (EDS) were used to characterize the targets. These methods show that the targets exhibit a uniform coverage of Mo over the gold backings. Furthermore, significant volume shrinkage occurring during the reduction of MoO 3 creates a porous Mo layer where the gold diffuses due to the high processing temperatures, resulting in mixed Mo–Au layers.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2021

Methane generation from low-maturity coals and shale source rocks at low temperatures (80–120 °C) over 14–38 months

This study contributes long-term (14 to 38 months) experimental evidence for geocatalytically mediated methanogenesis in immature to early mature shale and coal source rocks at temperatures from 80 to 120 °C. Borosilicate glass tubes with pre-outgassed coal and shale source rock chips and water were sealed under vacuum, sterilized, heated isothermally, and finally opened in connection with a vacuum line where headspace gases methane (CH 4 ) and carbon dioxide (CO 2 ) were collected. The possibility of admitting pre-existing CH 4 from closed pores into product gases during heating experiments was evaluated by comparative ball milling of original and heated rock chips, followed by quantitation of released gases with a novel closed-circuit laser-based SARAD RTM2200 gas detector system with sub-µmol sensitivity. The yields of produced CH 4 from individual source rocks were corrected by subtracting the amounts of pre-existing CH 4 from formerly closed pores in original source rocks that had leaked during long-term heating. Different shales and coals express contrasting propensities to geocatalytically generate CH 4 and CO 2 , with CH 4 yields ranging from 0.1 to 5.5 µmol g-1 total organic carbon (TOC). CH 4 yields from two petrographically different samples of Springfield Coal with comparable thermal maturity suggest that liptinite expresses a far higher propensity for methanogenesis, but liberates less CO 2 than vitrinite. Shale from the Second White Specks Formation generated approximately 10 times more CH 4 than New Albany Shale per g of TOC, further suggesting complex controls on CH 4 generation during catalytic methanogenesis. Higher temperature can enhance the activities of catalytic methanogenesis. Here, the extrapolation of laboratory-based reaction rates to natural conditions in organic-rich buried sediments suggests that geocatalytic methanogenesis can be fast enough in some source rocks to generate economically sizeable gas plays from immature to early mature source rocks over geologic time.

03 NATURAL GAS↗
DOE OSTI2023

Measurement of the Higgs boson mass with H → γγ decays in 140 fb –1 of $\sqrt{s}$ = 13 TeV pp collisions with the ATLAS detector

The mass of the Higgs boson is measured in the H→γγ decay channel, exploiting the high resolution of the invariant mass of photon pairs reconstructed from the decays of Higgs bosons produced in proton–proton collisions at a centre-of-mass energy $\sqrt{s}$ = 13 TeV. The dataset was collected between 2015 and 2018 by the ATLAS detector at the Large Hadron Collider, and corresponds to an integrated luminosity of 140 fb –1 . The measured value of the Higgs boson mass is 125.17 ± 0.11(stat.) ± 0.09(syst.) GeV and is based on an improved energy scale calibration for photons, whose impact on the measurement is about four times smaller than in the previous publication. A combination with the corresponding measurement using 7 and 8 TeV pp collision ATLAS data results in a Higgs boson mass measurement of 125.22 ± 0.11(stat.) ± 0.09(syst.) GeV. With an uncertainty of 1.1 per mille, this is currently the most precise measurement of the mass of the Higgs boson from a single decay channel.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2020

Cutting force and stability for inserted cutters using structured light metrology

This paper describes force and stability prediction for inserted end and face mills using a reverse engineering approach. Structured light scanning is used to identify the spatial coordinates of the points that define the multiple insert cutting edges. These points are used to extract the cutting edge radius and angle and are then incorporated in a time domain simulation that predicts cutting force and tool/workpiece deflection for user-selected operating parameters. Good agreement between predicted and measured cutting forces is demonstrated. The process stability is then predicted using the validated force model and measured structural dynamics.

Machining↗
DOE OSTI2025

Optimization of an aerostructural machining process using physics-guided Bayesian stability modelling

Existing algorithms for predicting milling chatter have not been widely adopted in industry since they require specialized instruments to measure the stability inputs. This study describes how the machining process for a meter-scale aluminum aerostructure was optimized using a physics-guided Bayesian stability model. The study was performed in collaboration with an industrial partner on production machines to evaluate the practicality of the proposed method under real-world conditions. For each cutting tool, the Bayesian approach automatically selected a small number of cutting tests, which were monitored using a microphone to observe the chatter frequency. The algorithm learned the system dynamics, cutting forces, and stability map from these test results. A novel algorithm for predicting tool bending stress was incorporated into the test selection algorithm to avoid tool breakage. On average, each set of optimized cutting parameters required less than six tests to identify and were 97% more productive than baseline parameters from the cutting tool manufacturer. The machining program was then further optimized using commercial feedrate scheduling software to remove cutting force spikes and reduce air cutting time. Five components were machined using the optimized process. These results demonstrate the potential for physics-guided Bayesian models to improve productivity in industrial settings.

Cornelius, Aaron [UT Knoxville]↗
DOE OSTI2026

Transforming E-Waste Into Strategic Resources: Techno-Economic Analysis of Gallium and By-products Recovery from LEDs via Bioleaching

The growing demand for gallium in optoelectronics and renewable energy applications raises concerns about supply security and production sustainability. This study evaluates the techno-economic feasibility of recovering gallium and by-products (copper and nickel) from waste GaN-based LEDs via bioleaching. A process flowsheet encompassing transportation, robotic disassembly, ball milling, bioleaching, solvent extraction/electrowinning, and refining was modeled. Based on mass balance analysis, more than 53 tons of LED waste are required annually to yield 1 kg of gallium alongside substantial copper and nickel co-products. Preliminary techno-economic analysis (TEA) shows an average total cost (ATC) of 6.84 USD/kg metal when costs are allocated by mass-weighted economic value (market price) fraction, corresponding to 6.75 USD/kg for copper, 15.91 USD/kg for nickel, and 470.95 USD/kg for gallium. For gallium, direct operational costs account for more than 70% of the cost. Monte Carlo simulations further quantify cost uncertainties under market price fluctuations. This work represents the first TEA of gallium recovery from GaN-based LEDs and highlights potential pathways for future cost reduction.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Life-cycle energy use and greenhouse gas emissions of palm fatty acid distillate derived renewable diesel

This study aims to quantify life-cycle fossil energy use and greenhouse gas (GHG) emissions for palm fatty acid distillate (PFAD) derived renewable diesel (RD) taking into consideration different feedstock classifications that are applicable to PFAD (residue, byproduct, or coproduct), and incorporating updated data for key processes. Under the three classifications, the PFAD to RD pathway was modeled using the Greenhouse gases, Regulated Emissions, and Energy Use in Technologies (GREET®) model. PFAD-derived RD could reduce fossil energy consumption by 77%–88%, relative to petroleum diesel. GHG emissions are very sensitive to PFAD classification and coproduct handling methods. Considering the production of palm oil and PFAD and economic value, we maintain that PFAD should be treated as a byproduct in palm oil refineries. With this treatment, PFAD-derived RD could achieve 84% GHG emissions reductions, compared to the emissions of petroleum diesel. We also employed a substitution method to address the substitution of PFAD by other materials in the marketplace. Compared to coproduct allocation results, we found substituting PFAD by tallow, soy oil, barley, and canola oil results in lower GHG emissions. Due to high induced land-use change emissions associated with palm farming, if PFAD is treated as a coproduct with refined palm oil, PFAD-derived RD may not deliver GHG reductions. A sensitivity analysis identified key parameters such as palm fruit yield, oil extraction efficiency in oil mills, and energy use intensity for RD production affects LCA results significantly; future efforts to improve these parameters could result in further GHG reductions.

09 BIOMASS FUELS↗
DOE OSTI2022

Supply chain optimization of sustainable aviation fuel from carinata in the Southeastern United States

We report carinata is a purpose-grown oilseed feedstock for renewable fuels, including sustainable aviation fuel (SAF) that can replace conventional aviation fuel (CAF). Given carinata is a new crop in the Southeastern United States, it is crucial to analyze its sustainability from a supply chain perspective. This study developed a mixed-integer linear programming (MILP) model and simulated it for 20 years, starting from a farm (county-level data) and ending at the airport. About 2.06 million ha in Alabama, Florida, and Georgia combined were found suitable for carinata production. Given the three-year rotation period, about 0.69 million hectares can be cultivated annually, approximately 65% of which was in Georgia. About 2.4% of the combined SAF annual demand of four major airports (about 210 thousand t) in the study area is satisfied at that level of carinata cultivation. However, all available SAF was supplied to the Atlanta airport as this decision minimizes the supply chain cost. A total of 1343 storage units, one oil extraction mill, and one biorefinery were needed to meet the overall demand. We found that SW Georgia is the top supplier of carinata seeds. The unit cost of production and carbon intensity were estimated to be $\$$0.89 L -1 (or $\$$26.79 GJ -1 ) and 0.91 kg CO 2 e L -1 (or 27.28 kg CO 2 e GJ -1 ), respectively. This carbon intensity of carinata-based SAF was 67.8% lower than that of CAF. With variations included in SAF demand, yield, and soil carbon sequestration, carbon savings remained between 66.5% and 67.8%. Given the GHG advantage of SAF over CAF, there is justification for subsidies required to make SAF competitive.

10 SYNTHETIC FUELS↗