Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “prediction methods”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 865 records · Page 48
All sourcesNASA NTRSDOE OSTI
NASA NTRS1982

Propeller flow visualization techniques

Propeller flow visualization techniques were tested. The actual operating blade shape as it determines the actual propeller performance and noise was established. The ability to photographically determine the advanced propeller blade tip deflections, local flow field conditions, and gain insight into aeroelastic instability is demonstrated. The analytical prediction methods which are being developed can be compared with experimental data. These comparisons contribute to the verification of these improved methods and give improved capability for designing future advanced propellers with enhanced performance and noise characteristics.

Stefko, G. L.↗
NASA NTRS1982

Recent sidewall boundary-layer investigations with suction in the Langley 0.3-m Transonic Cryogenic Tunnel

An experimental and theoretical study of the Langley 0.3-m Transonic Cryogenic Tunnel (TCT) sidewall boundary-layer with and without suction, has been made. Without suction, the boundary-layer displacement thickness at a station ahead of the model varied from about 1.6 mm to 1.3 mm over a Reynolds number range of 20 million to 200 million per m at Mach numbers from 0.30 to 0.76. Measured velocity profiles were correlated using the defect law of Hama. The boundary-layer displacement thickness decreased when suction was applied; however, after suction of about 2 percent of test section mass flow, the change in the thickness was small. A comparison of the measured suction effectiveness with finite difference and integral methods of boundary-layer calculation showed that both methods predicted the right trend over the range of suction velocities (up to a suction to free-stream velocity ratio of -0.02).

Murthy, A. V.↗
NASA NTRS1982

Performance degradation of propeller/rotor systems due to rime ice accretion

A theoretical model has been established which is applicable to both propeller and helicopter systems that determines the effect of rime ice accretion on the thrust coefficient, power coefficient, and efficiency as a function of time in a natural icing condition. Theoretical comparisons have been made with experimentally determined decrease in propeller thrust coefficient and efficiency for five natural icing conditions with good agreement. The present analytical model is also applicable to the helicopter case, where the method predicts radial and azimuthal rotor blade ice shapes in addition to torque rise as a function of time in a natural icing condition.

Korkan, K. D.↗
NASA NTRS1982

Small gas turbine combustor primary zone development

Designers of small gas turbine engines prefer a close-coupled compressor to turbine shafting arrangement, which in some designs necessitates the use of a small reverse-flow annular combustor. A design methodology for obtaining the maximum performance potential of these combustors is necessary. This paper describes an approach to optimize the design process and gain insight into primary zone performance through interactive theoretical analyses and experimental tests. Three candidate combustor designs are described which address the performance limiting problem areas associated with small annular combustors. Design methodology centers around understanding and controlling primary zone aerodynamics and the interaction of the distributed fuel with internal airflow patterns. Complete three-dimensional flow field analytical performance prediction procedures are presented and results compared with performance and emission measurements described by probes located at the exit of the primary zone. The effective use of analytical performance prediction methods in the design process is demonstrated.

Sullivan, R. E.↗
NASA NTRS1982

Superalloy composition modeling

Development of a predictive method for determination of the gamma/gamma prime phase fields, i.e., gamma prime volume fraction as a function of the multicomponent composition, is described. The cluster variation method used for binary alloys in which the precipitated phase is coherent with the matrix phase is extended for application to the multicomponent coherent gamma/gamma prime nickel-based superalloys. It is shown that the cluster variation method can accurately describe the equilibrium (incoherent) gamma/gamma prime phase fields in the binary Ni-Al phase diagram. The gamma/gamma prime phase field for the Ni-Cr-Al ternary phase diagram is computed as a function of temperature. A reasonable fit results between the calculated and the experimental diagrams. The modeling of the six-component Ni-Cr-Al-Co-Mo-Ti base superalloy and the effect of Ni substitution of Co are discussed.

Barefoot, J.↗
NASA NTRS1982

Turbine engine materials durability research

High temperature environmental attack of dollar intensive turbine components reduces turbine efficiency and can limit life. The mechanisms of alloy and coating attack and the effects of interaction with the environment on mechanical behavior. This base of understanding provides the foundation for developing life prediction methods and identifying strategies for controlling attack. Subjects discussed in detail include oxidation and new developments in thermal barrier coating research.

S. R. Levine↗
NASA NTRS1982

Development of a prototype automatic controller for liquid cooling garment inlet temperature

The development of a computer control of a liquid cooled garment (LCG) inlet temperature is descirbed. An adaptive model of the LCG is used to predict the heat-removal rates for various inlet temperatures. An experimental system that contains a microcomputer was constructed. The LCG inlet and outlet temperatures and the heat exchanger outlet temperature form the inputs to the computer. The adaptive model prediction method of control is successful during tests where the inlet temperature is automatically chosen by the computer. It is concluded that the program can be implemented in a microprocessor of a size that is practical for a life support back-pack.

Weaver, C. S.↗
NASA NTRS1983

Comparison of measured and predicted flight effects on high-bypass coaxial jet exhaust noise

A semi-empirical model for predicting the noise generated by conventional-velocity profile coaxial jets is compared with full scale flight data and model scale simulated flight data for high bypass nozzles. The prediction model was shown to agree with small scale static data for primary jet velocities from 215 to 795 m/s for a wide range of area, temperature, and velocity ratios between streams. However, there were insufficient model nozzle, simulated flight data available at that time to permit validation of the flight effects prediction. The comparisons presented demonstrate that the prediction method is also valid in flight.

Stone, J. R.↗
NASA NTRS1983

Advances in traction drive technology

Traction drives are traced from early uses as main transmissions in automobiles at the turn of the century to modern, high-powered traction drives capable of transmitting hundreds of horsepower. Recent advances in technology are described which enable today's traction drive to be a serious candidate for off-highway vehicles and helicopter applications. Improvements in materials, traction fluids, design techniques, power loss and life prediction methods will be highlighted. Performance characteristics of the Nasvytis fixed-ratio drive are given. Promising future drive applications, such as helicopter main transmissions and servo-control positioning mechanisms are also addressed.

Loewenthal, S. H.↗
NASA NTRS1982

Application of matrix singular value properties for evaluating gain and phase margins of multiloop systems

A stability margin evaluation method in terms of simultaneous gain and phase changes in all loops of a multiloop system is presented. A universal gain-phase margin evaluation diagram is constructed by generalizing an existing method using matrix singular value properties. Using this diagram and computing the minimum singular value of the system return difference matrix over the operating frequency range, regions of guaranteed stability margins can be obtained. Singular values are computed for a wing flutter suppression and a drone lateral attitude control problem. The numerical results indicate that this method predicts quite conservative stability margins. In the second example if the eigenvalue magnitude is used instead of the singular value, as a measure of nearness to singularity, more realistic stability margins are obtained. However, this relaxed measure generally cannot guarantee global stability.

Mukhopadhyay, V.↗
NASA NTRS1982

An implicit formulation for the one-dimensional two-phase multi-interface Stefan Problem

In recent years there has been an intensified effort in the analysis of the Stefan Problem. Particular interest is directed towards determining the location of the interface between the solid and liquid phases of the substance being analyzed. A method has been developed using an implicit finite difference scheme which provides an accurate calculation of the phase change interface locations for a problem with simultaneous multiple phases. This is achieved through an iterative technique which requires the phase change energy to be correctly distributed within the nodes which are undergoing a phase transition. The new method predicts the interface locations without requiring time step size control or node size modification at the interfaces.

Williams, S. D.↗
NASA NTRS1983

Comparison of measured and predicted flight effects on high-bypass coaxial jet exhaust noise

A recently developed semi-empirical model for predicting the noise generated by conventional-velocity-profile coaxial jets is compared with full-scale flight data and model-scale simulated flight data for high-bypass nozzles. The prediction model has been shown to agree with small-scale static data for primary jet velocities from 215 to 795 m/s for a wide range of area, temperature and velocity ratios between streams. However, there were insufficient model nozzle, simulated flight data available at that time to permit validation of the flight effects prediction. The comparisons presented in this paper demonstrate that the prediction method is also valid in flight.

Stone, J. R.↗
NASA NTRS1983

The acoustic response of a propeller subjected to gusts incident from various inflow angles

The acoustic effect of perturbing the inflow field of a propeller was studied. The perturbation was caused by a jet of air blowing into the propeller disc from various angles, creating spanwise and chordwise flow disturbances along the blades. The effects of the gust angle, speed and turbulence, and propeller rpm and thrust are shown with narrowband spectra and directivity plots of the acoustic field. A prediction method for the peaks of the harmonics of the blade passing frequency for various gust and propeller conditions is presented.

Jonkouski, G. C.↗
NASA NTRS1983

Design for prevention of acoustic fatigue

It is pointed out that new noise prediction methods and acoustic life estimation methods have matured to the point where they can be combined into a unified engineering procedure. "Life derivatives" can be extracted from parametric charts to furnish design data for preventing acoustic fatigue. The acoustic fatigue life is shown to be sensitive to the damping ratio through the use of life derivatives. The localized nature of propeller noise can be quantified with an "isodecibel" contour diagram.Even though the peak sound pressure level may be high, the directional derivatives show the noise decay rates with distance. Acoustic fatigue design is discussed from the overall design methodology and is shown to be similar to other structural design problems. While nonlinearities present a formidable design engineering problem, they are manageable by proven semi-empirical techniques. For new design problems, it is imperative to determine whether the data base completely spans the design variables.

Smith, H. W.↗
NASA NTRS1983

Engine cyclic durability by analysis and material testing

The problem of calculating turbine engine component durability is addressed. Nonlinear, finite-element structural analyses, cyclic constitutive behavior models, and an advanced creep-fatigue life prediction method called strainrange partitioning were assessed for their applicability to the solution of durability problems in hot-section components of gas turbine engines. Three different component or subcomponent geometries are examined: a stress concentration in a turbine disk; a louver lip of a half-scale combustor liner; and a squealer tip of a first-stage high-pressure turbine blade. Cyclic structural analyses were performed for all three problems. The computed strain-temperature histories at the critical locations of the combustor linear and turbine blade components were imposed on smooth specimens in uniaxial, strain-controlled, thermomechanical fatigue tests of evaluate the structural and life analysis methods.

Kaufman, A.↗
NASA NTRS1983

Helicopter impulsive noise: Theoretical and experimental status

The theoretical and experimental status of helicopter impulsive noise is reviewed. The two major source mechanisms of helicopter impulsive noise are addressed: high-speed impulsive noise and blade-vortex interaction impulsive noise. A thorough physical explanation of both generating mechanism is presented together with model and full-scale measurements of the phenomena. Current theoretical prediction methods are compared with experimental findings of isolated rotor tests. The noise generating mechanism of high speed impulsive noise are fairly well understood - theory and experiment compare nicely over Mach number ranges typical of today's helicopters. For the case of blade-vortex interaction noise, understanding of noise generating mechanisms and theoretical comparison with experiment are less satisfactory. Several methods for improving theory-experiment are suggested.

Schmitz, F. H.↗