Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “surface characterization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 847 records · Page 47
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Fabrication and Radio Frequency Properties of 3-GHz SRF Cavities Coated with MgB 2

Magnesium diboride (MgB 2 ) is considered a potential material for superconducting radio frequency cavities. MgB 2 coated Cu cavity will allow for a higher operational temperature than a bulk Nb cavity because of the higher transition temperature of MgB 2 and the high thermal conductivity of Cu. Using the hybrid physical chemical vapor deposition technique, MgB 2 coatings were successfully achieved on the inner wall of 3-GHz Cu cavities. The surface and superconducting properties of the coatings were characterized using small samples on Cu plugs mounted at different locations of mock cavities. RF measurement of a MgB 2 coated single-cell 3-GHz test cavity was carried out and it showed superconducting transition at 36 K. Here, the quality factor of this test cavity was lower than expected due to poor connectivity and inclusion of Mg-Cu alloy in the MgB 2 coating.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2026

Reactive Transport Modeling with Physics-Informed Machine Learning for Critical Minerals Applications

This study presents a physics-informed neural network (PINN) framework for reactive transport modeling for simulating fast bimolecular reactions in porous media. Accurate characterization of cAhemical interactions and product formation in surface and subsurface environments is essential for advancing critical mineral extraction and related geoscience applications. The proposed methodology sequentially addresses the flow and diffusion–reaction subproblems. The flow field is computed using a mixed formulation, while the diffusion–reaction system is modeled via two uncoupled tensorial diffusion equations reformulated in terms of chemical invariants. PINNs are employed to solve the governing equations, enabling data-efficient, mesh-free prediction of chemical concentration fields. The framework is validated through a series of benchmark problems involving flow in heterogeneous porous media. Initial verification is conducted using patch tests for the flow field, followed by validation of the transport problem with emphasis on preserving non-negativity of concentrations. The complete fast bimolecular reaction scenario is then solved, yielding spatial distributions of reactants and product species. Results demonstrate that the PINNs-based approach effectively captures sharp, mixing-limited reaction fronts and dispersive mixing behavior, offering reliable predictions of reactive plume evolution. These capabilities are crucial for evaluating long-term subsurface behavior in applications such as fluid storage, energy extraction, and efficient extraction of critical minerals.

42 ENGINEERING↗
DOE OSTI2025

Macro-level mechanical interlocking: A rapid joining approach for additively manufactured compression molded composite panels

Composite joining typically involves multiple steps, such as drilling and surface treatment, as part of the manufacturing process, which leads to low throughput and long cycle times. In the present study, we demonstrated a macro-level mechanical interlocking (MI) based, rapid joining technique to assemble additively manufactured compression molded (AMCM) panels, enabling the production of parts larger than the mold dimensions. Composite panels made of 20 wt% short carbon fiber reinforced acrylonitrile butadiene styrene (CF/ABS) were joined using MI features of various geometries, namely tree (TR), dovetail (Dov), rectangle 2 (Rect2), and rectangle 1 (Rect1), and their in-plane strength was evaluated. The resultant strength of the tested MI joints reached up to 74 % of the baseline tensile strength (i.e., the ‘no joint’ case). Observations from optical and scanning electron microscopy revealed inadequate polymer diffusion between the adherends, indicating that the joint strength was primarily derived from mechanical interlocking. Additionally, the fracture surfaces exhibited stress-whitening marks, which were characterized using differential scanning calorimetry (DSC). The increase in melting enthalpy suggested local stretching of polymer chains due to MI. Finite element analysis (FEA) indicated that the Rect1 MI feature, which generated the lowest stress concentration, outperformed the others in terms of joint strength, achieving 42 MPa. As a demonstration of the MI joining method, a battery box tray measuring 108 cm × 34 cm using a mold with an effective dimension of 36 cm × 34 cm successfully manufactured, resulting in a part with an area three times larger than the mold. In conclusion, this study presents a promising approach to improving composite joining techniques while minimizing production complexities.

In-plane joining↗
DOE OSTI2021

Layer dissolution in accumulative roll bonded bulk Zr/Nb multilayers under heavy-ion irradiation

In this work, the heavy-ion irradiation behavior of bulk zirconium-niobium multilayered composites was investigated up to large doses. Multilayers with an average individual layer thicknesses ranging between 15 and 80 nm were synthesized by accumulative roll bonding technique. The irradiation was performed with a defocused 7 MeV Zr 2+ ion beam at 500 °C. The maximum dose achieved was ~145 dpa at the depth of ~1.5 μm from the irradiated surface. Sub-surface microstructural damage and the chemical redistribution were characterized by transmission electron microscopy and energy dispersive spectroscopy, respectively. Irrespective of the layer thicknesses, the irradiation condition caused layer instability and the extent of damage varied with the dose levels. Doses lesser than ~60 dpa caused layer fragmentation and greater than ~60 dpa resulted in layer dissolution. The chemical mixing of layers occur to a depth of ~1 μm, consuming multiple bi-layer periods. Despite the elevated irradiation temperature (500 °C) and a slightly positive heat of mixing (+6 kJ/mol), no phase separation was observed and single-phase was retained in the mixed region. The results demonstrate that chemical mixing was facilitated by the liquid phase miscibility of Zr and Nb, which propelled the interdiffusion within the thermal spikes towards mixing.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Influence of oxidizing and reducing pretreatment on the catalytic performance of CeO 2 for CO oxidation

Cerium oxide (CeO 2 ) and ceria-based materials have been extensively investigated as catalyst and support materials for various catalytic reactions, due to higher oxygen storage capacity and excellent redox properties. In the current work, we investigated the impact of pretreatment conditions (e.g., oxidation and reduction) on the physical properties of bulk CeO 2 and catalytic activity for CO oxidation as a model reaction. To understand the physical properties of pretreated CeO 2 catalysts, a suite of complementary characterization techniques, including X-ray diffraction (XRD), surface area analysis (BET), X-ray photoemission spectroscopy (XPS), and Raman spectroscopy, were applied. The results showed that a higher pretreatment temperature led to a decreased specific surface area (SSA), a decrease in oxygen vacancy/defect sites, and increased crystallite size, while surface Ce 3+ /Ce 4+ ratio did not show a specific relationship to the treatment conditions. The 700 °C treated CeO 2 samples under oxidizing and reducing conditions showed higher specific oxidation rate (μmolCO/s/m 2 ) compared to other samples at 280 and 300 °C (or < 15% CO conversion). The CO conversion per total mass of catalysts, however, decreased with increasing temperatures, especially at 700 °C under reducing condition, indicating that the catalytic performance was affected by the physical properties (SSA, oxygen vacancy/defect sites, and crystallite size).

36 MATERIALS SCIENCE↗
DOE OSTI2025

Identifying Band Inversions in Topological Materials Using Diffusion Monte Carlo

Topological insulators are characterized by insulating bulk states and robust metallic surface states. Band inversion is a hallmark of topological insulators. At time-reversal invariant points in the Brillouin zone, spin–orbit coupling (SOC) induces a swapping of orbital character at the bulk band edges. Reliably detecting band inversion in solid-state systems with many-body methods would aid in identifying possible candidates for spintronics and quantum computing applications and improve our understanding of the physics behind topologically nontrivial systems. Density functional theory (DFT) methods are a well-established means of investigating these interesting materials due to their favorable balance of computational cost and accuracy but often struggle to accurately model the electron–electron correlations present in the many materials containing heavier elements. In this work, we develop a novel method to detect band inversion within continuum quantum Monte Carlo (QMC) methods that can accurately treat the electron correlation and spin–orbit coupling that are crucial to the physics of topological insulators. Our approach applies a momentum-space-resolved atomic population analysis throughout the first Brillouin zone utilizing the Löwdin method and the one-body reduced density matrix produced with diffusion Monte Carlo (DMC). We integrate this method into QMCPACK, an open source ab initio QMC package, so that these ground-state methods can be used to complement experimental studies and validate prior DFT work on predicting the band structures of correlated topological insulators. Here, we demonstrate this new technique on the topological insulator bismuth telluride, which displays band inversion between its Bi-p and Te-p states at the Γ-point. We show an increase in charge on the bismuth-p orbital and a decrease in charge on the tellurium-p orbital when comparing band structures with and without SOC. Additionally, we use our method to compare the degree of band inversion present in monolayer Bi 2 Te 3 , which has no interlayer van der Waals interactions, to that seen in the bilayer and bulk. The method presented here will enable future many-body studies of band inversion that can shed light on the delicate interplay between correlation and topology in correlated topological materials.

Band structure↗
DOE OSTI2023

Rapid Polyolefin Plastic Hydrogenolysis Mediated by Single-Site Heterogeneous Electrophilic/Cationic Organo-group IV Catalysts

A homologous series of cationic electrophilic group IV metal hydrides (M = Ti, Zr, Hf) created by chemisorption of the corresponding MNp 4 precursors on highly Brønsted acidic sulfated alumina (AlS) to yield loosely coordinated surface AlS/MNp 2 (Np = neopentyl) species are systematically characterized by ICP, EXAFS/XANES, DRIFTS, and solid-state high-resolution multidimensional NMR spectroscopy (SSNMR), as well as by energy span DFT computation. With effective stirring, these complexes readily undergo reaction with H 2 to yield AlS/M(alkyl)H species, which are highly active for the hydrogenolysis of diverse commercial polyethylenes, α-olefin-ethylene copolymers, isotactic polypropylene, and postconsumer polyolefins including high-density polyethylenes, yielding medium and small linear and branched hydrocarbons at turnover frequencies as high as 36,300 h –1 at 200 °C/17 atm H 2 for M = Zr. For given polyolefin and reaction conditions, turnover frequencies scale approximately as M = Zr > Hf > Ti, whereas catalyst thermal stability scales approximately as M = Hf ≈ Zr > Ti, and these trends are qualitatively understandable from the DFT analysis. These catalytic results reveal that the AlS/Hf(R)H-mediated hydrogenolysis favors wax-like and liquid products, whereas the AlS/Zr(R)H-mediated hydrogenolysis can be tuned between gases and liquids. Finally, DFT analysis identifies β-alkyl elimination as the turnover-limiting C–C scission process, which is particularly facile in these cationic d 0 complexes but not so in the neutrally charged analogues.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Direct Conversion of CO 2 to Olefins over a Cr 2 O 3 /ZSM-5@CaO Cooperative and Bifunctional Material Under Isothermal Conditions

Direct conversion of point-source CO 2 into fine chemicals over cooperative and bifunctional materials (BFMs) – composed of adsorbents and catalysts – has emerged as a promising approach to improve the energy efficiency of the carbon capture and conversion processes. In this study, a bifunctional material consisting of Cr 2 O 3 /ZSM-5 catalyst and CaO adsorbent was developed and tested in the CO 2 -oxidative dehydrogenation of propane (CO 2 –ODHP) for reactive capture of CO 2 in a fixed bed reactor. First, CaO was prepared using two distinct methods: solid-state and citrate sol–gel. The citrate sol–gel method resulted in small and finely-distributed CaO particles, allowing more accessible sites for CO 2 adsorption. Consequently, a high CO 2 adsorption capacity of ~14 mmol/g was achieved with fast adsorption kinetics compared to CaO prepared by the solid-state method. The CaO adsorbent was then combined with the Cr 2 O 3 /ZSM-5 catalyst for BFM synthesis and tested in the CO 2 –ODHP process, targeting propylene production. The BFM was extensively characterized to provide insights into the BFM’s surface chemistry, morphology, and reaction mechanism in the reactive capture process of CO 2 –ODHP. The results revealed that under isothermal adsorption–reaction conditions at 600 °C, a propane conversion of 22.5%, a propylene selectivity of 55.3%, and an olefin selectivity of 67.3% were achieved. The excellent propylene selectivity was attributed to the catalyst acidity and redox property of the Cr 2 O 3 /ZSM-5 catalyst, which facilitated the reaction pathway of propane dehydrogenation in the process of CO 2 –ODHP. Overall, this study renders Cr 2 O 3 /ZSM-5@CaO as promising BFMs with high CO 2 capture capacity and catalytic activity for integrated CO 2 capture and conversion in the ODHP reaction.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Feasibility of Algal Biochar, a Byproduct of Biofuel Production, as a Supplemental Cementitious Material

Algal biochar, as the solid residue of biofuel production from algal biomass, is reported to explore disposition options, aiming to lessen the liability or obstacles to biofuel production processes. However, landfills and open combustion lead to adverse environmental impacts. One way to add value to such wastes is to use them as admixtures in cementitious construction materials. This study aims to investigate the feasibility of algae-derived biochar as supplementary cementitious materials (SCM) at different water contents and mixture ratios. Algal biochar-cement composites were prepared with different algal biochar content as well as different water-to-cement (w/c) ratios, and the surface area, morphology, elemental, and mineralogical composition were characterized. To compensate for the high-water absorption of algal biochar, a small concentration of a superplasticizer was used since higher w/c ratios negatively impact strength. The mechanical performance of algal biochar-cement composites is compared with control composites using commercial silica fume as a typical commercial SCM. The findings suggest that algal biochar is a promising candidate to replace commercial SCM, like silica fume, since algal biochar-cement composites can reach comparable compressive strength and Young’s modulus to commercial pozzolan-cement materials with the same w/c ratio, though at later curing times, 33 days. Although the tensile strength of algal biochar-cement composites is statistically similar at 7 days, it is significantly lower at later curing times, and further investigation is required to improve this property. Algal biochar-based cement binders showed comparable embodied carbon to silica fume-based cement binders based on a cradle-to-gate lifecycle analysis. However, the ability of algal biochar to absorb large volumes of CO 2 over short periods of time, as measured in this study, makes this novel SCM an excellent alternative to reduce the embodied carbon of concrete structures cradle-to-grave at 1/10 of the cost. In conclusion, valorization of algae-derived solid waste provides great potential to reduce embodied carbon and brings credit to biofuel production and concrete-based construction.

algae-derived↗
DOE OSTI2026

Curvilinear magnetic effects in helicoid nanotubes

We report the fabrication and characterization of ferromagnetic helicoid nanotubes with a tunable surface curvature and chirality. Through combining focused electron beam induced deposition and magnetron sputtering we realize these complex curvilinear magnetic architectures. Electron holography reveals two distinct states: a single domain remanent state, with a magnetic chirality governed by the geometric chirality, and a vortex-anti-vortex domain wall, preferentially forming at areas of lower curvature. Micromagnetic simulations reveal how the geometry, specifically pitch and local surface curvature, affects the stability and formation of magnetic domain walls. Furthermore, we show that the interplay between magnetic and geometric chirality has a strong impact on domain wall motion, whereby a right-handed geometric chirality leads to faster domain wall motion and a left-handed geometry hinders domain wall transport. The results shown here highlight the potential of 3D magnetic architectures in spintronic devices and offer insights into how geometry and curvature affect the magnetization, the distribution of magnetic solitons and the motion of domain walls.

3D Nanomagnetism↗
DOE OSTI2025

Tungsten-dioxo single-site heterogeneous catalyst on carbon: synthesis, structure, and catalysis

This study investigates the application of a novel third-row metal, tungsten, to carbon-supported single-site metal-oxo heterogeneous catalysis. Tungsten is a green and earth-abundant metal, but an unexplored candidate in this role. The carbon (AC = activated carbon)-supported tungsten dioxo complex, AC/WO 2 was prepared via grafting of (DME)WO 2 Cl 2 (DME = 1,2-dimethoxyethane) onto high-surface-area activated carbon. AC/WO 2 was fully characterized by ICP-OES, XPS, EXAFS, XANES, SMART-EM, and DFT. W 4d 7/2 XPS and W L III -Edge XANES assign the oxidation state as W(VI), while EXAFS reveals two W=O double and two W–O single bonds at distances of 1.73 and 1.92 Å, respectively. These data align well with DFT computational results, supporting the structure as Carbon(–μ-O–) 2 M(=O) 2 . SMART-EM verifies that single W(VI) catalytic sites are bonded in an out-of-plane manner. The catalytic performance of air- and water-stable AC/WO 2 is compared to that of AC/MoO 2 . AC/WO 2 is more active and selective than the molybdenum analog in mediating alcohol dehydration of various substrates, and is recyclable. Notably, AC/WO 2 is an effective and recyclable catalyst for primary aliphatic alcohol dehydration and forms no dehydrogenation side products in contrast to AC/MoO 2 . However, AC/WO 2 is less effective in epoxidation and PET depolymerization. Overall, this work demonstrates the potential of carbon-supported third row metals for future studies.

02 PETROLEUM↗
DOE OSTI2020

Probing nuclear effects with neutrino-induced charged-current neutral pion production

We study neutrino-induced charged-current (CC) $\pi^0$ production on carbon nuclei using events with fully imaged final-state proton-$\pi^0$ systems. Novel use of final-state correlations based on transverse kinematic imbalance enable the first measurements of the struck nucleon's Fermi motion, of the intranuclear momentum transfer (IMT) dynamics, and of the final-state hadronic momentum configuration in neutrino pion production. Event distributions are presented for i) the momenta of neutrino-struck neutrons below the Fermi surface, ii) the direction of missing transverse momentum characterizing the strength of IMT, and iii) proton-pion momentum imbalance with respect to the lepton scattering plane. The observed Fermi motion and IMT strength are compared to the previous MINERvA measurement of neutrino CC quasielastic-like production. The measured shapes and absolute rates of these distributions, as well as the cross-section asymmetries show tensions with predictions from current neutrino generator models.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2023

Combining synchrotron X-ray diffraction, mechanistic modeling and machine learning for in situ subsurface temperature quantification during laser melting

Laser melting, such as that encountered during additive manufacturing, produces extreme gradients of temperature in both space and time, which in turn influence microstructural development in the material. Qualification and model validation of the process itself and the resulting material necessitate the ability to characterize these temperature fields. However, well established means to directly probe the material temperature below the surface of an alloy while it is being processed are limited. To address this gap in characterization capabilities, a novel means is presented to extract subsurface temperature-distribution metrics, with uncertainty, from in situ synchrotron X-ray diffraction measurements to provide quantitative temperature evolution data during laser melting. Temperature-distribution metrics are determined using Gaussian process regression supervised machine-learning surrogate models trained with a combination of mechanistic modeling (heat transfer and fluid flow) and X-ray diffraction simulation. The trained surrogate model uncertainties are found to range from 5 to 15% depending on the metric and current temperature. The surrogate models are then applied to experimental data to extract temperature metrics from an Inconel 625 nickel superalloy wall specimen during laser melting. The maximum temperatures of the solid phase in the diffraction volume through melting and cooling are found to reach the solidus temperature as expected, with the mean and minimum temperatures found to be several hundred degrees less. The extracted temperature metrics near melting are determined to be more accurate because of the lower relative levels of mechanical elastic strains. However, uncertainties for temperature metrics during cooling are increased due to the effects of thermomechanical stress.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Topography restoration in white-light interferometry using an instrument transfer function evaluated with binary pseudo-random arrays

Accurate knowledge of the instrument transfer function (ITF) is vital for topography measurements using white-light interferometry (WLI). To this end, we derive a complete set of analytical expressions for the power spectral density (PSD) of a discretely sampled binary pseudo-random array (BPRA) as a theoretical benchmark. We then determine the ITF by comparing this theoretical PSD with the measured PSD of the BPRA. For the Zygo ZeGage Pro HR with a objective, the determined ITF closely matches the nominal modulation transfer function (MTF). Accordingly, we integrate the nominal MTF into Fourier-domain restoration filters and apply them to practical WLI topography data, yielding restored topographies that show improved agreement with atomic force microscopy measurements. Overall, our integrated BPRA-based ITF measurement and filtering methodology offers a robust yet practical means of characterizing WLI performance and enhancing the accuracy of surface measurements.

Hirose, Shigenobu [Japan Agency for Marine Earth S↗
DOE OSTI2020

¬¬Integration of Quantification of Margins and Uncertainties Methodology into Parallel Discrete Event Simulator Framework

Parallel Discrete Events Simulation (PDES) is becoming increasingly important to lab efforts in security and intelligence. It is used to model complex asynchronous systems such as computer networks, satellite systems, vehicular traffic, and human performance. Uncertainty Quantification (UQ) techniques have become a mainstay of Verification and Validation (V&V) efforts on physics simulations. However, PDES models are very different from traditional physics simulations, and research into UQ techniques for PDES is in its infancy. It is not clear which traditional UQ techniques can be applied to PDES, or what new techniques will need to be developed. The goal of this project was to identify existing UQ techniques that can be applied to PDES, and to develop new techniques as necessary. The project implemented or developed techniques to handle issues that do not appear in traditional physics simulations, but are common among PDES, including sampling techniques for high-dimensional homogenous inputs, response surfaces for high-variance heteroskedastic output, and characterization of skewed output distributions. These are foundational UQ techniques that must be used in any complete UQ analysis (Tong 2018).

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2021

Corrosion Detection LDRD Seedling (Final Report)

Automation techniques for recognizing material defects are very common in fields like infrastructure survey and civil engineering; however, the defects are usually easily distinguishable from their background, on a larger scale (e.g. cement bridges), and very specific. Extracting information about a defect that is near or equal to the background of the data can be extremely difficult. Images with heavy background corrosion, pitting, cracking, and man-made defects (such as welding) makes extracting information on a specific defect near-impossible. This is especially true when the defect is on the micron level and the dynamic range of your image taking instrument is low. So, a simplified, Java-based Fiji™ (ImageJ) defect detection program, dependent on a ‘flag’ system, was proposed for data that has a micron level hairline crack that is near or equal to the background. The utilization of the built-in functions, plugins, and macro scripting capability of the Java-based software sends a series of flags to the user that help to identify if the surface contains a defect of interest and to characterize that defect.

42 ENGINEERING↗
DOE OSTI2022

Tools Assessing Performance (FY2022 Quarter 4 Report)

We were finally successful in acquiring TTU’s 200-meter tower data for the duration of the Isolated Building Wake Experiment (IBWE). This data will provide an independent measurement of the undisturbed wind profile including heights far above those that are typical of meteorological sensor networks. These measurements will characterize the mean and turbulence throughout the atmospheric surface layer, which will be particularly useful for validation of highfidelity computational fluid dynamics models. This dataset can be shared freely among the TAP team but not outside of it as TTU sells this data to the wind power industry. The journal article overview has been submitted to LANL’s publication review and will be submitted to the Journal of Wind Engineering and Industrial Aerodynamics once the review is complete. We are nearing completion on another two articles. The first discusses analyses of the evolution of the measurements of mean wind speed along the centerline of the building as a function of atmospheric stability. Rather than using individual time steps, all of the wind speed measurements are normalized using the upwind measurement at 2 building heights (H) and filtered by wind direction and atmospheric stability. The second discusses the development of the diffusive wake model and uses the averaged profiles from the first article to validate the behavior of the model. The portion of the section below on the diffusive wake model discussing comparisons with the averaged profiles, will be included in the validation section of this paper.

17 WIND ENERGY↗
DOE OSTI2023

Irradiation Behavior of Piezoelectric Materials for Nuclear Reactor Sensors

In-situ measurement of surface acoustic wave (SAW) resonators were used to characterize piezoelectric materials behavior in a nuclear reactor environment. Lithium niobate and aluminum nitride devices were tested up to 500°C temperature and 450 kW reactor power (1.9x10 12 n/cm 2 s). The resonant frequency responds to step changes in temperature and power. Materials’ response are inferred from the observed resonant frequency changes, in particular the kinetic behavior is used to determine mechanisms responsible for observed changes. The observed response is attributed to two mechanisms: temperature increase from gamma heating and accumulation of radiation-induced defects. Both of these mechanisms alter the physical properties of the piezoelectric materials, particularly the elastic constants. The demonstrated repeatability and reliability of SAW devices are attractive for sensor applications in extreme environments.

36 MATERIALS SCIENCE↗