SEARCH · Engineering Papers

Results for “charged”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 847 records · Page 47

All sources NASA NTRS DOE OSTI

DOE OSTI2020

Time-resolved site-selective imaging of predissociation and charge transfer dynamics: the CH 3 I B-band

The predissociation dynamics of the 6s (B 2 E) Rydberg state of gas-phase CH 3 I were investigated by time-resolved Coulomb-explosion imaging using extreme ultraviolet (XUV) free-electron laser pulses. Inner-shell ionization at the iodine 4d edge was utilized to provide a site-specific probe of the ensuing dynamics. The combination of a velocity-map imaging (VMI) spectrometer coupled with the pixel imaging mass spectrometry (PImMS) camera permitted three-dimensional ionic fragment momenta to be recorded simultaneously for a wide range of iodine charge states. In accord with previous studies, initial excitation at 201.2 nm results in internal conversion and subsequent dissociation on the lower-lying A-state surface on a picosecond time scale. Examination of the time-dependent yield of low kinetic energy iodine fragments yields mechanistic insights into the predissociation and subsequent charge transfer following multiple ionization of the iodine products. The effect of charge transfer was observed through differing delay-dependencies of the various iodine charge states, from which critical internuclear distances for charge transfer could be inferred and compared to a classical over-the-barrier model. Time-dependent photofragment angular anisotropy parameters were extracted from the central slice of the Newton sphere, without Abel inversion, and highlight the effect of rotation of the parent molecule before dissociation, as observed in previous works. Our results demonstrate the ability to perform three-dimensional ion imaging at high event rates and showcase the potential benefits of this approach, particularly in relation to further time-resolved studies at free-electron laser facilities.

74 ATOMIC AND MOLECULAR PHYSICS↗

DOE OSTI2021

Neutrino event selection in the MicroBooNE liquid argon time projection chamber using Wire-Cell 3D imaging, clustering, and charge-light matching

An accurate and efficient event reconstruction is required to realize the full scientific capability of liquid argon time projection chambers (LArTPCs). The current and future neutrino experiments that rely on massive LArTPCs create a need for new ideas and reconstruction approaches. Wire-Cell, proposed in recent years, is a novel tomographic event reconstruction method for LArTPCs. The Wire-Cell 3D imaging approach capitalizes on charge, sparsity, time, and geometry information to reconstruct a topology-agnostic 3D image of the ionization electrons prior to pattern recognition. A second novel method, the many-to-many charge-light matching, then pairs the TPC charge activity to the detected scintillation light signal, thus enabling a powerful rejection of cosmic-ray muons in the MicroBooNE detector. A robust processing of the scintillation light signal and an appropriate clustering of the reconstructed 3D image are fundamental to this technique. In this paper, we describe the principles and algorithms of these techniques and their successful application in the MicroBooNE experiment. A quantitative evaluation of the performance of these techniques is presented. Using these techniques, a 95% efficient pre-selection of neutrino charged-current events is achieved with a 30-fold reduction of non-beam-coincident cosmic-ray muons, and about 80% of the selected neutrino charged-current events are reconstructed with at least 70% completeness and 80% purity.

3D imaging↗

DOE OSTI2025

Evolution of charge correlations in the hole-doped kagome superconductor CsV 3−𝑥⁢ Ti 𝑥 ⁢Sb 5

The interplay between superconductivity and charge correlations in the kagome metal CsV 3⁢ Sb 5 can be tuned by external perturbations such as doping or pressure. Here we present a study of charge correlations and superconductivity upon hole doping via Ti substitution on the V kagome sites in CsV 3−𝑥 ⁢Ti 𝑥 ⁢Sb 5 via synchrotron x-ray diffraction and scanning superconducting quantum interference device measurements. While the superconducting phase, as viewed via the vortex structure, remains conventional and unchanged across the phase diagram, the nature of charge correlations evolves as a function of hole doping from the first superconducting dome into the second superconducting dome. For Ti doping in the first superconducting dome, competing 2×2×2 and 2×2×4 supercells form within the charge density wave state and are suppressed rapidly with carrier substitution. In the second superconducting dome, no charge correlations are detected. Here, comparing these results to those observed for CsV 3 ⁢Sb 5−𝑥 ⁢Sn 𝑥 suggests important differences between hole doping via chemical substitution on the V and Sb sites, particularly in the disorder potential associated with each dopant.

Charge density waves↗

DOE OSTI2025

Flavor diagonal nucleon charges using clover fermions on MILC HISQ ensembles

We present lattice results for the flavor diagonal charges of the proton from the analysis of eight ensembles generated using 2+1+1-flavors of highly improved staggered quarks by the MILC Collaboration. The calculation includes all the needed connected and disconnected contributions to nucleon three-point function. For extracting matrix elements using fits to the spectral decomposition of these correlation functions, two strategies to remove excited state contributions are employed and compared. To renormalize these charges, the 2+1-flavor mixing matrix is calculated in the regularization independent symmetric momentum subtraction intermediate scheme on the lattice. The final results are presented in the $\overline{MS}$ scheme at scale 2 GeV. The axial charges for the proton are $𝑔$$^{𝑢}_{𝐴}$ = 0.781⁢(25), $𝑔$$^{𝑑}_{𝐴}$ =−0.440⁢(39), and $𝑔$$^{𝑠}_{𝐴}$ = −0.055⁢(9); the tensor charges are $𝑔$$^{𝑢}_{𝑇}$ = 0.782⁢(28), $𝑔$$^{𝑑}_{𝑇}$ = −0.195⁢(16), and $𝑔$$^{𝑠}_{𝑇}$ = −0.0016⁢(12); and the scalar charges are $𝑔$$^{𝑢}_{𝑆}$ = 9.39⁢(88), $𝑔$$^{𝑑}_{𝑆}$ = 8.84⁢(93), and $𝑔$$^{𝑠}_{𝑆}$ = 0.37⁢(14). Results for the neutron are given by the 𝑢 ↔ 𝑑 interchange. Results for the sigma terms are 𝜎 𝜋⁢𝑁 | standard = 42⁢(6) MeV from a “standard” analysis and 𝜎 𝜋⁢𝑁 | 𝑁⁢𝜋 = 61⁢(6) MeV from an “𝑁⁢𝜋” analysis that includes the contributions of multihadron 𝑁⁢𝜋 excited states as motivated by chiral perturbation theory. Our preferred value 𝜎 𝜋⁢𝑁 | 𝑁⁢𝜋 is consistent with the phenomenological extraction from 𝜋 −𝑁 scattering data. The strangeness content of the proton, for which the standard analysis is appropriate, is 𝜎 𝑠 | standard = 35⁢(13) MeV.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

DOE OSTI2023

Differential charge radii: Proton-neutron interaction effects

The analysis of self-consistency and proton-neutron interaction effects in the buildup of differential charge radii were carried out in covariant density functional theoretical calculations without pairing interaction on the example of selected configurations in the Pb isotopes. The proton-neutron interaction of neutron(s) added to the neutron 𝑁 = 126 core and the protons forming the 𝑍 = 82 proton core is responsible for a major contribution to the buildup of differential charge radii. It depends on the products of proton and neutron wave functions and thus on their nodal structure. This interaction leads to a redistribution of single-particle density of occupied proton states which in turn modifies the charge radii. Furthermore, the microscopic origin of this redistribution and its consequences for differential charge radii were investigated for the first time. Self-consistency effects affecting the shape of proton potential, total proton densities and the energies of the single-particle proton states provide only minor contribution to differential charge radii.

190 ≤ A ≤ 219↗

DOE OSTI2024

Nature of Excitons and Their Ligand-Mediated Delocalization in Nickel Dihalide Charge-Transfer Insulators

The fundamental optical excitations of correlated transition-metal compounds are typically identified with multielectronic transitions localized at the transition-metal site, such as d d transitions. In this vein, intense interest has surrounded the appearance of sharp, below-band-gap optical transitions, i.e., excitons, within the magnetic phase of correlated Ni 2 + van der Waals magnets. The interplay of magnetic and charge-transfer insulating ground states in Ni 2 + systems raises intriguing questions on the roles of long-range magnetic order and of metal-ligand charge transfer in the exciton nature, which inspired microscopic descriptions beyond typical d d excitations. Here we study the impact of charge transfer and magnetic order on the excitation spectrum of the nickel dihalides ( Ni X 2 , X = Cl , Br, and I) using Ni- L 3 edge resonant inelastic x-ray scattering (RIXS). In all compounds, we detect sharp excitations, analogous to the recently reported excitons, and assign them to spin-singlet multiplets of octahedrally coordinated Ni 2 + stabilized by intra-atomic Hund’s exchange. Additionally, we demonstrate that these excitons are dispersive using momentum-resolved RIXS. Our data evidence a ligand-mediated multiplet dispersion, which is tuned by the charge-transfer gap and independent of the presence of long-range magnetic order. This reveals the mechanisms governing nonlocal interactions of on-site d d excitations with the surrounding crystal or magnetic structure, in analogy to ground-state superexchange. These measurements thus establish the roles of magnetic order, self-doped ligand holes, and intersite-coupling mechanisms for the properties of d d excitations in charge-transfer insulators. Published by the American Physical Society 2024

2-dimensional systems↗

DOE OSTI2025

A Comparison of Battery Charge Controller Technologies for Wave Energy Converters

Wave energy is a uniquely challenging field for electrical system designers. High peak and low average power potential with a constantly varying energy input is difficult to harness and control through conventional means. To power the blue economy, low-powered wave energy converters (WECs) need batteries for energy storage. Safely and effectively charging batteries from waves requires a charge controller to properly monitor and control voltage and current going to the battery. Currently, off-the-shelf charge controllers exist for other renewable generation such as wind, hydro, and solar. Two topologies were validated: a buck converter and a pulse width modulation (PWM) charge controller. Using an in-lab dry testbed, wave energy power inputs were simulated to properly validate the effectiveness of existing charge controller technologies, identifying the shortcomings and improvements needed to effectively harness wave energy.

battery storage↗

DOE OSTI2021

Grid Voltage Control Analysis for Heavy-Duty Electric Vehicle Charging Stations

This paper presents an analysis of grid voltage control strategies for heavy-duty electric vehicle charging stations. The performance of three voltage control approaches—including power factor control, standardized volt-volt ampere reactive (VAR) curve control, and customized volt-VAR curve control—are investigated and evaluated for three different sizes of charging stations, including a single-port charging station, a midsized three-port charging station, and six-port travel center. The charging stations are placed on multiple locations of four different types of distribution systems to obtain a comprehensive performance analysis of the voltage control approaches under different scenarios. To quantitively compare the performance of the three voltage control approaches, a series of metrics are designed to quantify the performance and contribute to the comprehensive analysis.

47 OTHER INSTRUMENTATION↗

DOE OSTI2023

Performance and Implementation Requirements for Residential EV Smart Charge Management Strategies

As the electrification of transportation expands, electric vehicle (EV) charging as residential loads will continue to grow. Residential EV charging has the potential to increase feeder peak loads and decrease voltage quality. As a result of this growing energy demand driven by EV, utilities may employ the use of smart charge management (SCM) controls to modify charging load profiles and mitigate these grid impacts. It is important that utilities understand both the potential benefits-as well as possible implementation challenges-before considering this technology as a solution to managing growing EV loads. In order for an SCM strategy to be an effective solution, the potential benefits must outweigh the implementation challenges. This study establishes and tests a novel framework to assess the implementation requirements of different SCM controls. It identifies a range of requirements specific to various SCM controls and implementation approaches to compare the relative challenges associated with the deployment of each. When paired with analysis on the effectiveness of the ability of each control to mitigate grid impacts from EV charging, this assessment is critical in comparing the value potential of different SCM controls.

ADVANCED PROPULSION SYSTEMS↗

DOE OSTI2023

A Framework to Evaluate the Grid Impacts of EV Fleet Charging Solutions

Growing Electric vehicle (EV) adoption in residential and commercial applications is driving the need for the charging infrastructures required to fulfill the charging needs. The resulting increase in demand for electric power will add a significant load to the electric grid, which could negatively impact the grid operation. EVs are power electronic loads and draw harmonic currents which can lead to a host of power quality issues. Therefore, it is crucial to assess the grid impacts and management of EV charging loads to ensure the reliable operation of the electric grid. In this paper, we develop a framework to help determine power-quality impacts given an EV charging schedule on the system. We compare the performance of unmanaged and managed charging solutions on factors like voltage drop, flicker, harmonic distortion and the peak site load - based on the EV depot in Hazelwood school district. The results allow insights into operation and site design of EV depots.

ADVANCED PROPULSION SYSTEMS,POWER TRANSMISSION AND↗

DOE OSTI2025

Development and Experimental Validation of a High-Power DC Distribution Testbed for Advanced Charging Infrastructure and Energy Management

This paper presents the development of a hardware testbed for DC-distributed high-power charging (HPC) stations. As DC distributed solutions emerge as a viable solution to optimize HPC site operations, challenges such as interoperability, protection, and seamless integration of distributed energy resources (DER) persist. These issues underscore the need for a robust testing facility to investigate compliance of available commercial off-the-shelf (COTS) market devices. The developed testbed features a DC-distributed charging hub including a charger, emulated energy storage system (ESS), and site level communication and controller implementation. It facilitates the testing of COTS hardware, charger prototypes, standards validation and site energy management system (SEMS) controllers at rated power. This paper details the development of the charging infrastructure platform, implementation of communication system, validation of different SEMS algorithms, and understanding improvements required for future expansion. Using the developed testbed, interoperability gaps for SEMS implementation with multi-vehicle concurrent charging via a multi-port charger are experimentally observed. Aimed at supporting the transition to large-scale EV charging infrastructure deployment and DER integration, this testbed plays a crucial role in conformity testing of COTS device interoperability.

24 POWER TRANSMISSION AND DISTRIBUTION↗

DOE OSTI2020

XPS guide: Charge neutralization and binding energy referencing for insulating samples

This guide deals with methods to control surface charging during XPS analysis of insulating samples and approaches to extracting useful binding energy information. Furthermore, the guide summarizes the causes of surface charging, how to recognize when it occurs, approaches to minimize charge buildup, and methods used to adjust or correct XPS photoelectron binding energies when charge control systems are used. Additionally, there are multiple ways to control surface charge buildup during XPS measurements and examples of systems on advanced XPS instruments are described. There is no single, simple, and foolproof way to extract binding energies on insulating material, but advantages and limitations of several approaches are described. Because of the variety of approaches and limitations of each it is critical for researchers to accurately describe the procedures that have been applied in research reports and publications.

47 OTHER INSTRUMENTATION↗

DOE OSTI2024

Interfacial charge transfer and its impact on transport properties of LaNiO 3 /LaFeO 3 superlattices

Charge transfer or redistribution at oxide heterointerfaces is a critical phenomenon, often leading to remarkable properties such as two-dimensional electron gas and interfacial ferromagnetism. Despite studies on LaNiO 3 /LaFeO 3 superlattices and heterostructures, the direction and magnitude of the charge transfer remain debated, with some suggesting no charge transfer due to the high stability of Fe 3+ (3d 5 ). Here, we synthesized a series of epitaxial LaNiO 3 /LaFeO 3 superlattices and demonstrated partial (up to ~0.5 e - /interface unit cell) charge transfer from Fe to Ni near the interface, supported by density functional theory simulations and spectroscopic evidence of changes in Ni and Fe oxidation states. The electron transfer from LaFeO 3 to LaNiO 3 and the subsequent rearrangement of the Fe 3d band create an unexpected metallic ground state within the LaFeO 3 layer, strongly influencing the in-plane transport properties across the superlattice. Moreover, we establish a direct correlation between interfacial charge transfer and in-plane electrical transport properties, providing insights for designing functional oxide heterostructures with emerging properties.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2021

Charge radii of the nucleon from its flavor dependent Dirac form factors

In this report we have determined the proton and the neutron charge radii from a global analysis of the proton and the neutron elastic form factors, after first performing a flavor decomposition of these form factors under charge symmetry in the light cone frame formulation. We then extracted the transverse mean-square radii of the flavor dependent quark distributions. In turn, these are related in a model-independent way to the proton and neutron charge radii but allow us to take into account motion effects of the recoiling nucleon for data at finite but high momentum transfer. In the proton case we find $\langle r_p \rangle$ = 0.852±0.002 (stat.) ± 0.009 (syst.) (fm), consistent with the proton charge radius obtained from muonic hydrogen spectroscopy. The current method improves on the precision of the $\langle r_p \rangle$; extraction based on the form factor measurements. Furthermore, we find no discrepancy in the $\langle r_p \rangle$ determination among the different electron scattering measurements, all of which, utilizing the current method of extraction, result in a value that is consistent with the smallest $\langle r_p \rangle$ extraction from the electron scattering measurements. Concerning the neutron case, past results relied solely on the neutron-electron scattering length measurements, which suffer from an underestimation of underlying systematic uncertainties inherent to the extraction technique. Utilizing the present method we have performed the first extraction of the neutron charge radius based on nucleon form factor data, and we find $\langle r^2_n \rangle$ = -0.122±0.004 (stat.) ± 0.010 (syst.) (fm 2 ).

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

DOE OSTI2022

Effects of stratification and charge cooling on combustion in a gasoline direct-injection compression ignition (GDCI) engine

With the development of low temperature engine combustion strategies, performance of gasoline-type fuels under compression ignition conditions has attracted extensive research interest. Meanwhile, for the sake of co-optimization of engines and fuels for future ground transportation, identification and evaluation of general fuel properties should be a core research priority instead of endless testing of specific fuels. In this study, the roles of fuel octane sensitivity in characterizing the ignition performance of gasoline surrogates have been systematically investigated under typical gasoline direct ignition compression ignition (GDCI) engine conditions using 3D combustion CFD simulation, especially considering the subsequent in-cylinder charge stratification and charge cooling. Two different operating conditions, high boost pressure low boost temperature (beyond-RON) case and low boost pressure high boost temperature (beyond-MON) case, were considered. By comparing with our previous zero-dimensional chemical kinetic study of gasoline surrogates in advanced compression ignition (ACI) engines, the effects of stratification and charge cooling on the combustion processes are investigated. It is found that different fuel octane sensitivities lead to slight difference in equivalence ratio stratification and charge cooling due to differences in volatility. However, fuel reactivity is still the more dominant factor than the stratification and charge cooling effects in determining combustion phasing. The present results help to justify the P-T domain framework for engine autoignition analysis of overlapping pressure-temperature trajectory with ignition delay iso-contour. Here, the results also provide useful guidance to the understanding of GCI combustion process, and to the evaluation of controlling fuel properties and the selection of alternative fuels in GCI engines.

33 ADVANCED PROPULSION SYSTEMS↗

DOE OSTI2020

COVID-19 global pandemic planning: Performance and electret charge of N95 respirators after recommended decontamination methods

Shortages of N95 respirators for use by medical personnel have driven consideration of novel conservation strategies, including decontamination for reuse and extended use. Decontamination methods listed as promising by the Centers for Disease Control and Prevention (CDC) (vaporous hydrogen peroxide (VHP), wet heat, ultraviolet irradiation (UVI)) and several methods considered for low resource environments (bleach, isopropyl alcohol and detergent/soap) were studied for two commonly used surgical N95 respirators (3M™ 1860 and 1870+ Aura™). Although N95 filtration performance depends on the electrostatically charged electret filtration layer, the impact of decontamination on this layer is largely unexplored. As such, respirator performance following decontamination was assessed based on the fit, filtration efficiency, and pressure drop, along with the relationship between (1) surface charge of the electret layer, and (2) elastic properties of the straps. Decontamination with VHP, wet heat, UVI, and bleach did not degrade fit and filtration performance or electret charge. Isopropyl alcohol and soap significantly degraded fit, filtration performance, and electret charge. Pressure drop across the respirators was unchanged. Modest degradation of N95 strap elasticity was observed in mechanical fatigue testing, a model for repeated donnings and doffings. CDC recommended decontamination methods including VHP, wet heat, and UV light did not degrade N95 respirator fit or filtration performance in these tests. Extended use of N95 respirators may degrade strap elasticity, but a loss of face seal integrity should be apparent during user seal checks. NIOSH recommends performing user seal checks after every donning to detect loss of appropriate fit. Decontamination methods which degrade electret charge such as alcohols or detergents should not be used on N95 respirators. The loss of N95 performance due to electret degradation would not be apparent to a respirator user or evident during a negative pressure user seal check.

60 APPLIED LIFE SCIENCES↗

DOE OSTI2020

Estimate of Lorentz force effects on charged particles

Thermonuclear (TN) fusion reaction between deutrons are D + D → T + P D + D → 3 He + n where P is the proton, D is the deuteron, T is the triton, n is the neutron, and 3 He is the helion. They are born with high energies (0.82 MeV for 3 He, 1.01 MeV for T, 3.02 MeV for P, and 2.45 MeV for n). The charged particles slow down due to the drag force (stopping power). While slowing down, the charged particles deposit their energy, which may affect the TN burn characteristics. When magnetic field is present, the velocity of the charged particle would be affected due to the Lorentz force, which can affect the stopping of the charged particle. As a consequence, TN burn characteristics may change, Our purpose is to asses the importance of the Lorentz force in stopping of the charged particle, based on a simple comparison between the Lorentz force and stopping power.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

DOE OSTI2021

Development of an Extreme Fast Charging Battery

The objective of the project is to research, develop, design, fabricate, and demonstrate extreme fast charging (XFC) Li-ion cells capable of a 10 min charge to deliver 180Wh/kg at the beginning of life (BoL) and sustain >500 XFC cycles with less than 20% capacity loss. The PI developed an asymmetric temperature modulation (ATM) charging strategy that charges a Li-ion cell at an elevated temperature of ~60oC and discharges at the ambient temperature. The elevated charging temperature eliminates Li plating, while the limited exposure time to 60oC effectively controls materials degradation, thereby enabling XFC with remarkable battery life. We developed and demonstrated 209 and 271 Wh/kg cells, both of which exceed the afore-mentioned target of delivering 180Wh/kg at BoL and sustaining 500+ XFC cycles with less than 20% loss.

25 ENERGY STORAGE↗