Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Technology transition”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 847 records · Page 47

In-Use Fleet Evaluation of Fast-Charge Battery Electric Transit Buses

With support from the U.S. Department of Energy's Vehicle Technologies Office, the National Renewable Energy Laboratory (NREL) conducts real-world performance evaluations of advanced medium- and heavy-duty fleet vehicles. Evaluation results can help vehicle manufacturers fine-tune their designs and assist fleet managers in selecting fuel-efficient, low-emission vehicles that meet their economic and operational goals. In 2015, NREL launched an in-service evaluation of 12 battery electric buses (BEBs) compared to conventional compressed natural gas (CNG) buses operated by Foothill Transit in West Covina, California. The study aims to improve understanding of the overall usage and effectiveness of fast-charge BEBs and associated charging infrastructure in transit operation. To date, NREL researchers have analyzed more than 148,000 km of in-use operational data, including driving and charging events. Foothill Transit purchased the BEBs with grant funding from the Federal Transit Administration's Transit Investments for Greenhouse Gas and Energy Reduction Program.

33 ADVANCED PROPULSION SYSTEMS↗

Baseline Glass Development for Combined Fission Products Waste Streams

Borosilicate glass was selected as the baseline technology for immobilization of the Cs/Sr/Ba/Rb (Cs), lanthanide (Ln) and transition metal fission product (TM) waste steams as part of a cost benefit analysis study. Vitrification of the combined waste streams have several advantages, minimization of the number of waste forms, a proven technology, and similarity to waste forms currently accepted for repository disposal. A joint study was undertaken by Pacific Northwest National Laboratory (PNNL) and Savannah River National Laboratory (SRNL) to develop acceptable glasses for the combined Cs + Ln + TM waste streams (Option 1) and Cs + Ln combined waste streams (Option 2) generated by the AFCI UREX+ set of processes. This study is aimed to develop baseline glasses for both combined waste stream options and identify key waste components and their impact on waste loading. The elemental compositions of the four-corners study were used along with the available separations data to determine the effect of burnup, decay, and separations variability on estimated waste stream compositions. Two different components/scenarios were identified that could limit waste loading of the combined Cs + LN + TM waste streams, where as the combined Cs + LN waste stream has no single component that is perceived to limit waste loading. Combined Cs + LN waste stream in a glass waste form will most likely be limited by heat due to the high activity of Cs and Sr isotopes.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

TESS Lens-Bezel Assembly Modal Testing

The Transiting Exoplanet Survey Satellite (TESS) program, led by the Kavli Institute for Astrophysics and Space Research at the Massachusetts Institute of Technology (MIT) will be the first-ever spaceborne all-sky transit survey. MIT Lincoln Laboratory is responsible for the cameras, including the lens assemblies, detector assemblies, lens hoods, and camera mounts. TESS is scheduled to be launched in August of 2017 with the primary goal to detect small planets with bright host starts in the solar neighborhood, so that detailed characterizations of the planets and their atmospheres can be performed. The TESS payload consists of four identical cameras and a data handling unit. Each camera consists of a lens assembly with seven optical elements and a detector assembly with four charge-coupled devices (CCDs) including their associated electronics. The optical prescription requires that several of the lenses are in close proximity to a neighboring element. A finite element model (FEM) was developed to estimate the relative deflections between each lens-bezel assembly under launch loads to predict that there are adequate clearances preventing the lenses from making contact. Modal tests using non-contact response measurements were conducted to experimentally estimate the modal parameters of the lens-bezel assembly, and used to validate the initial FEM assumptions. Key Words Non-contact measurements, modal analysis, model validation

Modal Testing↗

Quantification of locked mode instability triggered by a change in confinement

Abstract This work presents the first analysis of the disruptive locked mode (LM) triggered by the dynamics of a confinement change. It shows that, under certain conditions, the LM threshold during the transient is significantly lower than expected from steady states. We investigate the sensitivity to a controlled n = 1 error field (EF) activated prior to the L-H transition in the COMPASS tokamak, at q 95 ∼ 3, β N ∼ 1, and using EF coils on the high-field side of the vessel. A threshold for EF penetration subsequent to the L-H transition is identified, which shows no significant trend with density or applied torque, and is an apparent consequence of the reduced intrinsic rotation of the 2/1 mode during this transient phase. This finding challenges the assumption made in theoretical and empirical works that natural mode rotation can be predicted by global plasma parameters and urges against using any parametric EF penetration scaling derived from steady-state experiments to define the EF correction strategy in the entire discharge. Furthermore, even at EFs below the identified penetration threshold, disruptive locking of sawtooth-seeded 2/1 tearing modes is observed after about 30% of L-H transitions without external torque.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Understanding the L-H isotope effect at the DIII-D tokamak and advancements in synthetic turbulence diagnostics

Abstract It is determined that while heat flux differences between hydrogen and deuterium isotope experiments result from natural differences in carbon impurity content at DIII-D, it is not the origin of the low to high confinement mode (L-H) transition isotope effect. More specifically, a two times larger edge radial electric field in hydrogen compared to deuterium is uncovered and believed to play an important role. The origin of this radial electric field difference is determined to have two possible origins: differences in poloidal rotation and turbulent Reynolds stress in the closed field line region, and increased outer strike point temperatures and space potentials on open field lines. Experimental observations from both profile and turbulence diagnostics are supported by nonlinear gyrokinetic simulations using the code CGYRO. Simulations illustrated heat transport isotope effects in the plasma edge and shear layer resulting from differences in impurity content, electron non-adiabaticity, and main ion mass dependent E × B shear stabilization. Turbulence prediction comparisons from flux-matched CGYRO simulations to experimental measurements including electron temperature, density and velocity fluctuations are found to be in good agreement with available data. A dedicated DIII-D experiment in hydrogen was performed to seed more carbon than naturally occurring, to match deuterium experiments, and possibly reduce the L-H power threshold based on gyro-kinetic predictions. To our surprise, while ion temperature gradient (ITG) turbulence was stabilized, nodiscernible change in L-H power threshold were observed in these special hydrogen experiments. In particular, it is noticed that the edge radial electric field and Reynolds stress were observed as nearly unchanging in the presence of ITG stabilization. These experimental data have enabled a more comprehensive picture of the multitude of isotope effects at play in fusion experiments, and the important potential connection between the confined and unconfined plasma regions in regulating L-H transition dynamics.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Controller Strategies for Managing Air Traffic in High Altitude Arrival Sectors

Substantial increases in the volume of air traffic in the National Airspace System (NAS) are forecast for the next decade, with the number of passengers travelling on U.S. airlines expected to increase by as much as 60%. This increased demand on system capacity will be accompanied by increases in traffic complexity as air traffic service providers routinely accommodate user preferred routing requests. Changes to the NAS to meet these new demands are currently underway, including development of new decision support tools to aid controllers in monitoring and managing air traffic, and increased air-to-air and air-to-ground information exchange. Changes in roles and responsibilities of pilots and controllers in flight path management will accompany these changes in traffic patterns and information technology, however the ultimate responsibility for maintaining aircraft separation will remain with the air traffic controller. A thorough understanding of the methods controllers use to manage air traffic will help ensure that changes to the NAS are implemented in a way that maintains the controller's ability to separate aircraft as the system evolves. This presentation describes the strategies controllers use today to manage arrival traffic in its descent from cruise altitude to the Terminal Radar Approach Control (TRACON) boundary. Factors that increase the complexity of this task include the presence of overflight traffic, varying aircraft performance characteristics, winds aloft, ground speed variations with altitude, the need to merge arrival traffic into a single stream, and, when arrival traffic exceeds airport runway capacity, the added task of metering flow into the TRACON. Because of the limited information available to controllers to manage arrival traffic, their strategies are often driven by the need to reduce the task's complexity, which can result in de-optimized flight paths for individual aircraft (e.g., sub-optimal descent or speed profiles). Understanding these strategies and the cognitive demands that drive them will support a safe transition to a NAS that relies on enhanced technologies. In addition, it could enable system developers to identify opportunities for new automation-based procedures or information displays that could reduce the controller's workload and increase operational efficiency.

Smith, Nancy↗

Report on the Radiation Effects Testing of the Infrared and Optical Transition Radiation Camera Systems

Presented in this report are the results tests performed at Argonne National Lab in collaboration with Los Alamos National Lab to assess the reliability of the critical 99 Mo production facility beam monitoring diagnostics. The main components of the beam monitoring systems are two cameras that will be exposed to radiation during accelerator operation. The purpose of this test is to assess the reliability of the cameras and related optical components when exposed to operational radiation levels. Both X-ray and neutron radiation could potentially damage camera electronics as well as the optical components such as lenses and windows. This report covers results of the testing of component reliability when exposed to X-ray radiation. With the information from this study we provide recommendations for implementing protective measures for the camera systems in order to minimize the occurrence of radiation-induced failure within a ten month production run cycle.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Medium- and Heavy-Duty Vehicle Field Evaluations

This presentation provides information about NREL's real-world evaluations of commercial vehicle technologies, which compare the performance of advanced medium- and heavy-duty fleet vehicles to conventional vehicles. NREL conducts these customized evaluations in partnership with commercial and government fleets across the nation. Current fleet and industry partners include UPS, Workhorse, Parker Hannifin, Proterra, Foothill Transit, Long Beach Transit, BYD, Odyne, Duke Energy, Miami-Dade, TransPower, Eaton, Cummins, Bosch, and Clean Cities/National Clean Fleet Partnership. The presentation focuses on two particular vehicle evaluation projects -- hydraulic hybrid refuse haulers operated by Miami-Dade and electric transit buses operated by Foothill Transit.

33 ADVANCED PROPULSION SYSTEMS↗

Airspace Technology Demonstration 3 (ATD-3): Dynamic Weather Routes (DWR) Technology Transfer Document Summary Version 1.0

Airspace Technology Demonstration #3 (ATD-3) is part of NASA's Airspace Operations and Safety Program (AOSP) - specifically, its Airspace Technology Demonstrations (ATD) Project. ATD-3 is a multiyear research and development effort which proposes to develop and demonstrate automation technologies and operating concepts that enable air navigation service providers and airspace users to continuously assess weather, winds, traffic, and other information to identify, evaluate, and implement workable opportunities for flight plan route corrections that can result in significant flight time and fuel savings in en route airspace. In order to ensure that the products of this tech-transfer are relevant and useful, NASA has created strong partnerships with the FAA and key industry stakeholders. This summary document and accompanying technology artifacts satisfy the first of three Research Transition Products (RTPs) defined in the Applied Traffic Flow Management (ATFM) Research Transition Team (RTT) Plan. This transfer consists of NASA's legacy Dynamic Weather Routes (DWR) work for efficient routing for en-route weather avoidance. DWR is a ground-based trajectory automation system that continuously and automatically analyzes active airborne aircraft in en route airspace to identify opportunities for simple corrections to flight plan routes that can save significant flying time, at least five minutes wind-corrected, while avoiding weather and considering traffic conflicts, airspace sector congestion, special use airspace, and FAA routing restrictions. The key benefit of the DWR concept is to let automation continuously and automatically analyze active flights to find those where simple route corrections can save significant time and fuel. Operators are busy during weather events. It is more effective to let automation find the opportunities for high-value route corrections.

ATD-3↗

Quantifying the Mobility and Energy Benefits of Automated Mobility Districts Using Microscopic Traffic Simulation

Connected and automated vehicles (CAVs) are increasingly being discussed as the basis for shared mobility and on-demand services to replace privately owned vehicles. The rapid growth of transportation networking companies (TNCs) and their increasing investment in automated vehicle (AV) technologies attests to this. Combining the concepts of TNCs, with AV and on-demand transit services, the term 'automated mobility district' (AMD) describes a district-scale implementation of CAV technology to realize the full benefits of a shared, fully automated vehicle service within a confined region. This research effort provides a modeling architecture for AMDs along with a preliminary analysis to quantify the mobility and energy benefits of such districts. A customized open-source microscopic mobility simulation toolkit built on the simulation of urban mobility (SUMO) platform is implemented for AMD performance evaluation. Experimental scenarios are tested with different combinations of operational variables to provide insights on energy and mobility gains that can be realized in AMDs.

30 DIRECT ENERGY CONVERSION↗

Modeling and Simulation of Automated Mobility Districts

Connected and automated vehicles (CAVs) are increasingly being discussed as the basis for shared mobility and on-demand services to replace privately owned vehicles. The rapid growth of Transportation Networking Companies (TNCs) and their increasing investment in automated vehicle (AV) technologies attests to this. Combining the concepts of TNCs, with AVs and on-demand transit services, the term 'automated mobility district' (AMD) describes a district-scale implementation of CAV technology to realize the full benefits of a shared, fully automated vehicle service within a confined region. This research effort provides a modeling architecture for AMDs along with a preliminary analysis to quantify the mobility and energy benefits of such districts. A customized open-source microscopic mobility simulation toolkit built on the Simulation of Urban Mobility (SUMO) platform is implemented for AMD performance evaluation. Experimental scenarios are tested with different combinations of operational variables to provide insights on energy and mobility gains that can be realized in AMDs.

33 ADVANCED PROPULSION SYSTEMS↗

Quantifying the Mobility and Energy Benefits of Automated Mobility Districts Using Microscopic Traffic Simulation

Connected and automated vehicles (CAVs) are increasingly being discussed as the basis for shared mobility and on-demand services to replace privately owned vehicles. The rapid growth of transportation networking companies (TNCs) and their increasing investment in automated vehicle (AV) technologies attests to this. Combining the concepts of TNCs, with AV and on-demand transit services, the term “automated mobility district” (AMD) describes a district-scale implementation of CAV technology to realize the full benefits of a shared, fully automated vehicle service within a confined region. This research effort provides a modeling architecture for AMDs along with a preliminary analysis to quantify the mobility and energy benefits of such districts. A customized open-source microscopic mobility simulation toolkit built on the simulation of urban mobility (SUMO) platform is implemented for AMD performance evaluation. Experimental scenarios are tested with different combinations of operational variables to provide insights on energy and mobility gains that can be realized in AMDs.

Zhu, Lei↗

L–H transition threshold studies in helium plasmas at JET

We present a study of the power threshold for L–H transitions (P LH ) in almost pure helium plasmas, obtained in recent experiments at JET with an ITER-like wall (Be wall and W divertor). The most notable new result is that the density at which P LH is minimum, $\bar{n}_{c,min}$, is considerably higher for helium than for deuterium and hydrogen plasmas. We discuss the possible implications for ITER in its pre-fusion operating power phase.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

A System Dynamics Model of Early-Stage Transition Dynamics in the Bioproducts Industry

The U.S. Department of Energy, Bioenergy Technologies Office has a broad understanding of different conversion processes that produce bioproducts (chemicals derived from biomass feedstocks) and the techno-economic attributes of those processes. However, bioproducts have in many cases proven to be difficult to scale up to commercial production, and there is currently a need for greater understanding around the possible successful scenarios for advancing the bioproducts industry. Insight into the myriad factors that impact the success of individual bioproducts and the growth of the bioproducts industry will enable bioproduct stakeholders to evaluate strategies for development and investment that could achieve the greatest impact. An understanding of these factors will also enable the identification of synergies between the bioproducts and biofuels industries that occur through shared learning and co-production. The Bioproduct Transition Dynamics (BTD) model explores questions such as the following: what are the factors that separate a successful, commercially produced bioproduct like succinic acid from one that never progresses beyond bench-scale lab research? Can these factors be influenced by stakeholders, and to what extent? The BTD model uses system dynamics to capture the impacts of investor decision-making, bioproduct techno-economics, and end use factors during the early stages of bioproduct development. Key components of the BTD model include techno-economic benchmarks that inform the investor decision-making process, failures and setbacks in development and the resulting need for additional work, and the impacts of effective or ineffective management during each development stage. These factors and their interactions are tracked through bench-scale laboratory research, piloting, demoing, and the construction and operation of the first commercial-scale plant. Bioproduct development is linked to the biofuels industry through a shared-learning model, enabling the benefit to biofuels from bioproduct technology and feedstock supply chain development to be quantified. A wide variety of bioproducts can be analyzed using the BTD model, including bioproducts that have been developed through economic or policy-driven mechanisms, and those with either niche (low volume) or scalable (high volume) demand. The BTD model also has the potential to apply to technology development processes outside the bioproducts industry; background research performed for this project has shown that the early stages of technology development are similar, and impacted by similar factors, regardless of the exact industry. This presentation will cover the BTD model logic, input data, validation process, and results of a sensitivity analysis based on techno-economic data for succinic acid. The sensitivity analysis was performed to identify factors with the largest impact on the eventual success or failure of a bioproduct. Results indicate that management effectiveness, which affects how efficiently money spent is converted into technological advancements, is the single most important factor in determining whether a bioproduct reaches commercial-scale production. The capacity of the first commercial plant and the type of biomass feedstock used, as well as the presence of government support in the form of cost-sharing, were also identified as significant factors.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

Materials technology programs in support of a mercury Rankine space power system

A large portion of the materials technology is summarized that was generated in support of the development of a mercury-rankine space power system (SNAP-8). The primary areas of investigation are: (1) the compatibility of various construction materials with the liquid metals mercury and NaK, (2) the mechanical properties of unalloyed tantalum, and (3) the development of refractory metal/austenitic stainless steel tubing and transition joints. The primary results, conclusions, and state of technology at the completion of this effort for each of these areas are summarized. Results of possible significance to other applications are highlighted.

Stone, P. L.↗

Cognitive Communications and Networking Technology Infusion Study Report

As the envisioned next-generation SCaN Network transitions into an end-to-end “system of systems” with new enabling capabilities, it is anticipated that the introduction of machine learning, artificial intelligence, and other cognitive strategies into the network infrastructure will result in increased mission science return, improved resource efficiencies, and increased autonomy and reliability. This enhanced set of cognitive capabilities will be implemented via a “space cloud” concept to achieve a service-oriented architecture with distributed cognition, de-centralized routing, and shared, on-orbit data processing. The enabling cognitive communications and networking capabilities that may facilitate the desired network enhancements are identified in this document, and the associated enablers of these capabilities, such as technologies and standards, are described in detail.

Knoblock, Eric J.↗

LDRD conclusion poster - Synthesizing Heterometallic Uranium Single Crystals to Understand the Influence of the Secondary Metals on Uranyl Axial Bond Strength

Understanding how transition metals influenced the chemistry of lanthanide and actinide (f-element) materials is critical for advancing separation technologies, materials design, and coordination chemistry. This project examined how incorporating first-row transition metals affected the structural and spectroscopic properties of f-element coordination polymers. In uranium(VI)-based systems synthesized with 2,6-pyridinedicarboxylic acid (PDC) ligands, single-crystal X-ray diffraction and Raman spectroscopy revealed that the presence of transition metals shortened the uranyl axial bond and induced a blue shift in its symmetric stretching vibration—evidence of increased bond strength. Electronic structure analysis, including Density of States (DOS) calculations using density functional theory (DFT), revealed altered orbital overlaps and highlighted the role of transition metal d-orbitals in modulating bonding. Raman modes were modeled using truncated structural fragments in collaboration with the University of Notre Dame, and although the predicted frequencies were lower than experimental values, they remained within expected ranges. In parallel, similar experiments with cerium (Ce) in the presence of cobalt (Co) and PDC demonstrated multi-step single-crystal-to-single-crystal transformations—behavior not observed in the uranium systems. Initial products included light yellow, orange, and polycrystalline materials. Single-crystal X-ray diffraction studies, conducted in collaboration with the Colorado School of Mines, identified the yellow phase as monometallic Ce(PDC)2(H2O)2·4H2O and the orange phase as heterometallic Ce2Co(PDC)4(H2O)6. After standing in solution for one week, both phases fully transformed into a dark yellow crystalline phase, [Ce3(PDC)5(H2O)8].6(H2O). Remarkably, this transformation was reversible—disturbing the equilibrium by removing some crystals caused reversion to the initial Ce(PDC)2(H2O)2·4H2O phase, highlighting dynamic behavior. All three structures were previously unreported. Solid-state UV-visible and Raman spectroscopy further distinguished these phases, revealing ligand-to-metal charge transfer involving Ce and characteristic d–d transitions from Co(II). The precise mechanism driving these transformations remained unclear; however, pH-dependent experiments confirmed that the transformation did not occur when the pH decreased. Overall, the project demonstrated that transition metals could be employed to tune bonding interactions, structural dimensionality, and optical properties in f-element materials, establishing new pathways for designing functional heterometallic systems. The work resulted in several novel structural discoveries and fostered productive collaborations with the University of Notre Dame and the Colorado School of Mines.

37 - INORGANIC, ORGANIC, PHYSICAL AND ANALYTICAL C↗

Decision-tree structures utilizing a phase-transition material

The rich internal physics due to competing electronic phases present in phase-transition materials such as VO2 offer the potential for compact building block design for emerging non-von Neumann computing technologies. Here, based on the relaxation dynamics of an insulator-metal phase transition, we demonstrate experimentally a decision-tree classifier embedded within a single volatile resistive switching device. The tree is constructed by the combination of the voltage pulse and relaxation time and can adapt to different tasks. We use machine learning to analyze the relaxation process, enabling a predictive voltage-relaxation time phase diagram for the electrical resistance state. Classification of the etiology of the chronic cough is presented as a proof-of-principle use case. Further, our approach can be generalized to broader classes of solid-state and solid-liquid interfacial systems that demonstrate a variety of phase relaxations.

36 MATERIALS SCIENCE↗