Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Conduction”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 847 records · Page 47
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Overcoming the Conductance versus Crossover Trade-off in State-of-the-Art Proton Exchange Fuel-Cell Membranes by Incorporating Atomically Thin Chemical Vapor Deposition Graphene

Permeance–selectivity trade-offs are inherent to polymeric membranes. In fuel cells, thinner proton exchange membranes (PEMs) could enable higher proton conductance and increased power density with lower area-specific resistance (ASR), smaller ohmic losses, and lower ionomer cost. However, reducing thickness is accompanied by an increase in undesired species crossover harming performance and long-term efficiency. Here, we show that incorporating atomically thin monolayer graphene synthesized via scalable chemical vapor deposition (CVD) and tunable defect density into PEMs (Nafion, ~5–25 μm thick) can allow for reduced H 2 crossover (~34–78% of Nafion of a similar thickness) while maintaining adequate areal proton conductance for applications (>4 S cm –2 ). In contrast to most prior work using >50 μm symmetric Nafion sandwich structures, we elucidate the interplay of graphene defect density and Nafion proton transport resistance on the performance of Nafion|graphene composite membranes and find high-quality low-defect density CVD graphene (G) supported on Nafion 211 (~25 μm); i.e., N211|G has a high areal proton conductance (~6.1 S cm –2 ) and the lowest H 2 crossover (~0.7 mA cm –2 ). Fully functional centimeter-scale N211|G fuel-cell membranes demonstrate performance comparable to that of state-of-the-art Nafion N211 at room temperature as well as standard operating conditions (~80 °C, ~150–250 kPa-abs) with H 2 /air (power density ~0.57–0.63 W cm –2 ) and H 2 /O 2 feed (power density ~1.4–1.62 W cm –2 ) and markedly reduced H 2 crossover (~53–57%).

25 ENERGY STORAGE↗
DOE OSTI2023

Single Ion Conducting Hairy Nanoparticle Additive to Improve Cycling Stability of Solid Polymer Electrolytes

The development of a solid electrolyte that can impede dendrite growth while still maintaining an appropriate level of conductivity is essential for improving performance of solid-state Li-ion battery. In this paper, we report the synthesis of single Li-ion conducting hairy nanoparticle (NP) materials that improved the cycling stability of lithium bis(trifluoromethanesulfonyl)imide (LiTFSI)-doped poly(ethylene oxide) (PEO) solid electrolyte without significant reduction in conductivity. To unveil mechanisms leading to improved cycling stability, several characterization techniques including broadband dielectric spectroscopy, differential scanning calorimetry, small angle X-ray scattering, transmission electron microscopy, and shear rheology were used to study properties of polymer composites (PC) with added hairy NPs. It was found that hairy NPs influenced the Li/electrolyte interface and improved mechanical properties of bulk composites, all of which contributed to homogenous Li plating and stripping. The improved performance has been found in composites with concentrations of 4.8 and 9.1 weight % of added hairy NPs, which enabled Li cycling stability at 0.2 mA cm–2 critical current density (>300 h) that was otherwise not possible in either PEO-LiTFSI alone or PEO-LiTFSI composites containing a polymer identical to that attached to hairy NPs. Based on the discovered ability of hairy NP to influence bulk and interfacial properties of solid electrolyte, their use as additives is expected to be equally effective in reducing dendrite formation in other electrolytes relevant for the design of solid-state battery.

25 ENERGY STORAGE↗
DOE OSTI2021

Thickness-Independent Vibrational Thermal Conductance across Confined Solid-Solution Thin Films

In this study, we experimentally show that the thermal conductance across confined solid-solution crystalline thin films between parent materials does not necessarily lead to an increase in thermal resistances across the thin-film geometries with increasing film thicknesses, which is counterintuitive to the notion that adding a material serves to increase the total thermal resistance. Confined thin epitaxial Ca 0.5 Sr 0.5 TiO 3 solid-solution films with systematically varying thicknesses in between two parent perovskite materials of calcium titanate and (001)-oriented strontium titanate are grown, and thermoreflectance techniques are used to accurately measure the thermal boundary conductance across the confined solid-solution films, showing that the thermal resistance does not substantially increase with the addition of solid-solution films with increasing thicknesses from ~1 to ~10 nm. Contrary to the macroscopic understanding of thermal transport where adding more material along the heat propagation direction leads to larger thermal resistances, our results potentially offer experimental support to the computationally predicted concept of vibrational matching across interfaces. This concept is based on the fact that a better match in the available heat-carrying vibrations due to an interfacial layer can lead to lower thermal boundary resistances, thus leading to an enhancement in thermal boundary conductance across interfaces driven by the addition of a thin “vibrational bridge” layer between two solids.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Database of Nonaqueous Proton-Conducting Materials

This work presents the assembly of 48 papers, representing 74 different compounds and blends, into a machine-readable database of nonaqueous proton-conducting materials. SMILES was used to encode the chemical structures of the molecules, and we tabulated the reported proton conductivity, proton diffusion coefficient, and material composition for a total of 3152 data points. The data spans a broad range of temperatures ranging from -70 to 260 °C. To explore this landscape of nonaqueous proton conductors, DFT was used to calculate the proton affinity of 18 unique proton carriers. The results were then compared to the activation energy derived from fitting experimental data to the Arrhenius equation. It was found that while the widely recognized positive correlation between the activation energy and proton affinity may hold among closely related molecules, this correlation does not necessarily apply across a broader range of molecules. This work serves as an example of the potential analyses that can be conducted using literature data combined with emerging research tools in computation and data science to address specific materials design problems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Atomistic simulations of the thermal conductivity of liquids

We present a method based on sinusoidal approach to equilibrium molecular dynamics (SAEMD) to compute the thermal conductivity of liquids Similar to nonequilibrium molecular dynamics, and unlike equilibrium simulations based on the Green-Kubo formalism, the method only requires the calculation of forces and total energies. The evaluation of heat fluxes and energy densities is not necessary, thus offering the promise of efficiently implementing first principles simulations based on density functional theory or deep molecular dynamics. Our approach is a generalization of SAEMD for solids, where the thermal conductivity is computed in the steady state, instead of a transient regime, thus properly taking into account diffusive terms in the heat equation. We present results for liquid water at ambient conditions and under pressure and discuss simulation requirements to obtain converged values of the thermal conductivity as a function of size and simulation time.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Intrinsic anharmonicity and thermal properties of ultralow thermal conductivity Ba 6 Sn 6 Se 13

Ultralow thermal conductivity materials continue to be of great interest for technologically important applications such as thermal insulators and thermoelectrics. Often, such materials possess constituents with extensive dynamic disorder, or “rattlers,” or structural disorder such as metallic glasses. Nevertheless, targeted crystalline bonding order and anharmonicity can provide effective means for the scattering of the phonons in certain materials. Our combined experimental and theoretical investigation of Ba 6 Sn 6 Se 13 reveals such a material, with ultralow thermal conductivity measured over a large temperature range. Optic phonon modes hybridize with acoustic modes at relatively low energies resulting in strong acoustic-optic scattering and limited phonon lifetimes. Moreover, our investigations reveal various avoided crossings at low energies that contribute to phonon scattering. These are derived from chiral phase symmetries and may result in nontrivial topological behaviors for phonon band crossings in this chiral material. This work contributes to the ongoing research on low thermal conductivity materials and the underlying mechanisms that affect their thermal behaviors. Manipulation of these effects may provide pathways for enhancement of material properties for targeted thermal applications using similar materials.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Thermal conductivity of crack-containing media: A numerical study

The present study aims to evaluate the effective thermal conduction behavior of crack-containing media through micromechanical modeling. Numerical analyses were performed using the finite element method, first using periodic arrays of elliptical pores and then reducing the elliptical minor axis to reach the crack limit. This parametric approach was seen to be able to capture the effect of discontinuity across the crack face in a straightforward manner. The overall thermal conductivity of the model structures, encompassing a range of crack densities and spatial distributions, was investigated. It was found that, for cracks with mixed orientations, the effective thermal conductivity is insensitive to the actual crack alignment and can be uniquely represented by the crack density. The mixed-orientation periodic crack configurations are also representative of random sizes, orientations, and spatial distributions of cracks, thus exhibiting a high degree of generality. The modeling analyses can also be used to determine simple empirical expressions for two- and three-dimensional media containing random cracks.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Conduction Heat Transfer through Solid in Porous Materials: A Comparative Study by Finite-Element Simulations and Effective Medium Approximations

The development of insulation materials with low effective thermal conductivity is essential for energy savings in various applications, including buildings, food services, pipe insulation, and refrigeration. Such materials can be developed by using micro- or nanoporous structures, as well as low-thermal conductivity gases and/or reduced pressure. A variety of effective medium approximation (EMA) models have been developed to study thermal transport through solid in porous structures. However, in many cases, the impacts of porosity on solid conduction are not well predicted by EMA models because of the assumptions made for simplification. Furthermore, the results can vary by a factor of up to 1.5, depending on the morphology of the pores. Hence, proper guidance is needed to choose the appropriate EMA model for a given morphology. This work presents a finite element method study using COMSOL Multiphysics software for various geometries, including hollow cubes, overlapping hollow spheres (normally stacked and tightly packed), and Voronoi structures, and compares the results to those obtained from various EMA models. Simulation results for the hollow cubes and Voronoi structures matched well with the Maxwell-Eucken and Russell model. The results for hollow spheres closely matched the Bauer model and the Glicksman model with fitting parameters. This work provides guidance on analyzing and designing insulation materials for energy savings in the future.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Conductive Ink with Circular Life Cycle for Printed Electronics

Electronic waste carries energetic costs and an environmental burden rivaling that of plastic waste due to the rarity and toxicity of the heavy-metal components. Recyclable conductive composites are introduced for printed circuits formulated with polycaprolactone (PCL), conductive fillers, and enzyme/protectant nanoclusters. Circuits can be printed with flexibility (breaking strain ≈80%) and conductivity (≈2.1 × 10 4 S m -1 ). These composites are degraded at the end of life by immersion in warm water with programmable latency. Approximately 94% of the functional fillers can be recycled and reused with similar device performance. The printed circuits remain functional and degradable after shelf storage for at least 7 months at room temperature and one month of continuous operation under electrical voltage. Here, the present studies provide composite design toward recyclable and easily disposable printed electronics for applications such as wearable electronics, biosensors, and soft robotics.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Strongly Anharmonic Phonons and Their Role in Superionic Diffusion and Ultralow Thermal Conductivity of Cu 7 PSe 6

We report the quest for advanced superionic materials requires understanding their complex atomic dynamics, but detailed studies of the interplay between lattice vibrations and ionic diffusion remain scarce. Here inelastic and quasielastic neutron scattering measurements in the superionic argyrodite Cu 7 PSe 6 are reported, combined with molecular dynamics (MD) based on ab initio and machine-learned potentials, providing critical insights into the atomistic mechanisms underlying fast ion conduction. The results reveal how long-range Cu diffusion is limited by intercluster hopping, controlled by selective anharmonic phonons of the crystalline framework. Further, the Green–Kubo simulations reproduce the ultralow lattice thermal conductivity and identify contributions from mobile ions, phonons, and their cross-correlations. The mode resolved analysis shows that the thermal conductivity is dominated by low-energy acoustic phonon modes of the overall crystal framework. The analysis of mode-resolved spectral functions further show that vibrational modes with significant Cu contributions are strongly damped, corresponding to the breakdown of associated phonon quasiparticles. These results highlight the importance of strongly anharmonic effects in superionic systems, in which the traditional quasiharmonic phonon picture is insufficient, and pave the way toward combining machine-learning accelerated simulations with neutron scattering experiments to rationalize the complex atomic dynamics underlying ionic and thermal transport.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Charge Reservoirs in an Expanded Halide Perovskite Analog: Enhancing High–Pressure Conductivity through Redox–Active Molecules

As halide perovskites and their derivatives are being developed for numerous optoelectronic applications, controlling their electronic doping remains a fundamental challenge. Herein, we describe a novel strategy of using redox-active organic molecules as stoichiometric electron acceptors. The cavities in the new expanded perovskite analogs (dmpz)[Sn 2 X 6 ], (X=Br – (1Br) and I – (1I)) are occupied by dmpz 2+ (N,N'-dimethylpyrazinium), with the LUMOs lying ca. 1 eV above the valence band maximum (VBM). Compressing the metal-halide framework drives up the VBM in 1I relative to the dmpz LUMO. The electronic conductivity increases by a factor of 105 with pressure, reaching 50(17) S cm –1 at 60 GPa, exceeding the high-pressure conductivities of most halide perovskites. This conductivity enhancement is attributed to an increased hole density created by dmpz 2+ reduction. Lastly, this work elevates the role of organic cations in 3D metal-halides, from templating the structure to serving as charge reservoirs for tuning the carrier concentration.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Hexaazatriphenylene‐Based Two‐Dimensional Conductive Covalent Organic Framework with Anisotropic Charge Transfer

Here, the development of covalent organic frameworks (COFs) with efficient charge transport is of immense interest for applications in optoelectronic devices. To enhance COF charge transport properties, electroactive building blocks and dopants can be used to induce extended conduction channels. However, understanding their intricate interplay remains challenging. We designed and synthesized a tailor-made COF structure with electroactive hexaazatriphenylene (HAT) core units and planar dioxin (D) linkages, denoted as HD-COF. With the support of theoretical calculations, we found that the HAT units in the HD-COF induce strong, eclipsed π–π stacking. The unique stacking of HAT units and the weak in-plane conjugation of dioxin linkages leads to efficient anisotropic charge transport. We fabricated HD-COF films to minimize the grain boundary effect of bulk COFs, which resulted in enhanced conductivity. As a result, the HD-COF films showed an electrical conductivity as high as 1.25 S cm −1 after doping with tris(4-bromophenyl)ammoniumyl hexachloroantimonate.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Transparent Conductive Encapsulants for Photoelectrochemical Applications

Utilizing sunlight to directly perform photoelectrochemical reactions is a promising route to renewable, net carbon-neutral fuels. However, a common problem with solar fuel production is semiconductor degradation in aqueous environments. An ideal protection layer should (1) prevent solution from reaching the semiconductor, (2) maintain charge transfer to and from solution, and (3) be transparent to light above the semiconductor band gap. While there have been substantial advances toward layers that meet these requirements, they are not easily adapted to new surfaces or new reactions, which can make protection difficult for newly developed photoabsorbers and (photo)electrochemical reaction pairings. In this work, we demonstrate the use of transparent conductive encapsulants (TCEs) to meet these requirements while also allowing for photoelectrode- and reaction-agnostic adaptability. TCEs are composed of an ethyl-vinyl acetate matrix with embedded conductive metal-coated microspheres that can be laminated to semiconductors. First, the electrochemical behavior of TCE-coated electrodes for the reduction of methyl viologen is characterized, demonstrating through-TCE electrical conduction. Then, photoelectrochemical measurements on TCE-protected semiconductors demonstrate the flexibility of this protection scheme. Finally, long-term photoelectrochemical measurements probe the efficacy of TCEs as protection layers. These findings demonstrate the potential of TCEs as adaptable protection layers in various photoelectrochemical applications.

14 SOLAR ENERGY↗
DOE OSTI2020

Polyphosphonates as ionic conducting polymers

Polyphosphonates, a class of polymers with the generic formula –[P(R)(X)–OR'O] n –, exhibit a high degree of modularity due to the range of R, R', and X groups that can be incorporated. As such, these polymers may be designed with a polyethylene oxide (PEO) backbone (R' group) and employed as solid polymer electrolytes (SPEs). Two PEO-containing polyphosphonate analogs (R = Ph; X = S or Se) were doped with LiPF 6 and their conductivities were measured. Conductivities were similar (X = S) to or exceeding (X = Se) those of standard PEO systems (just below 10 -4 S/cm at 100°C). Binding models for Li + were generated using 31 P{ 1 H}NMR titration experiments. Binding of Li + by these polyphosphonates followed a positive cooperativity model, and varying the X group (S or Se) affected the observed cooperativity (Hill coefficient = 1.73 and 4.16, respectively). The presence of Se also leads to an increase in conductivity as temperature is raised above the T g , which is likely an effect of reduced Columbic interactions. Finally, because of their modularity and ease with which cation binding can be evaluated using 31 P{ 1 H} NMR titration experiments, polyphosphonates offer a unique approach for the modification of Li + ion battery technology.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Optimization of anionic conductivity through the coexistence of ionomer cluster and backbone-backbone morphologies in anion exchange membranes

Random copolymers of poly(4-vinylpyridine) and polyisoprene were synthesized, and subsequently quaternized with 1-alkylbromides. The number of carbons on the pendant side-chain of the resultant comb-shaped polymer, n, ranged from 2-8. The comb-shaped polymers were crosslinked employing thiol-ene chemistry to give mechanically robust ion conducting membranes. Analysis by wide and medium-angle X-ray scattering show three morphology regimes that are dependent on the number of carbons on the pendant side-chains. When n = 2, ionomer cluster morphology was dominant, when n = 8 backbone-backbone morphology was dominant, and when n = 3-6, the membrane showed a coexistence of both ionomer cluster and backbone-backbone morphologies. Evaluation of the water uptake of the membranes showed a maximum water uptake per cation of 9.5 when n = 5 at 95% relative humidity (RH) and 60 degrees C. Finally, conductivity of the samples characterized by electrochemical impedance spectroscopy showed bromide conductivity as high as 110 mS/cm when n = 3 at 95% RH and 90 degrees C.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Mapping Thermal Conductivity at the Atomic Scale: A Step toward the Thermal Design of Materials

We describe a spatial decomposition of the thermal conductivity, termed site-projected thermal conductivity, which quantifies the thermal conduction activity at each atomic site—a critical parameter for the thermal design of materials. The method is based on the Green–Kubo formula and the harmonic approximation and requires the force-constant and dynamical matrices, as well as a relaxed structural model. Throughout the study, it uses high quality models previously tested and compared to many experiments. It discusses the method and underlying approximations for amorphous silicon, carries the detailed analysis for amorphous silicon, and then examines an amorphous-crystal silicon interface and representative carbon materials. This study identifies the sites and local structures that reduce heat transport, and quantify these (estimate the spatial range) over which these “thermal defects” are effective. It identifies filamentary structures in the amorphous silicon network which impact heat transport and electronic structure (the Urbach edge) and electronic transport.

36 MATERIALS SCIENCE↗
DOE OSTI2022

An Unbalanced Battle in Excellence: Revealing Effect of Ni/Co Occupancy on Water Splitting and Oxygen Reduction Reactions in Triple–Conducting Oxides for Protonic Ceramic Electrochemical Cells

Porous electrodes that conduct electrons, protons, and oxygen ions with dramatically expanded catalytic active sites can replace conventional electrodes with sluggish kinetics in protonic ceramic electrochemical cells. In this work, a strategy is utilized to promote triple conduction by facilitating proton conduction in praseodymium cobaltite perovskite through engineering non-equivalent B-site Ni/Co occupancy. Surface infrared spectroscopy is used to study the dehydration behavior, which proves the existence of protons in the perovskite lattice. The proton mobility and proton stability are investigated by hydrogen/deuterium (H/D) isotope exchange and temperature-programmed desorption. It is observed that the increased nickel replacement on the B-site has a positive impact on proton defect stability, catalytic activity, and electrochemical performance. This doping strategy is demonstrated to be a promising pathway to increase catalytic activity toward the oxygen reduction and water splitting reactions. The chosen PrNi 0.7 Co 0.3 O 3–δ oxygen electrode demonstrates excellent full-cell performance with high electrolysis current density of –1.48 A cm –2 at 1.3 V and a peak fuel-cell power density of 0.95 W cm –2 at 600 °C and also enables lower-temperature operations down to 350 °C, and superior long-term durability.

08 HYDROGEN↗
DOE OSTI2023

Linker-Based Bandgap Tuning in Conductive MOF Solid Solutions

Herein, the synthesis of Cu 3 (HAB) x (TATHB) 2-x (HAB: hexaaminobenzene, TATHB: triaminotrihydroxybenzene) is reported. Synthetic improvement of Cu 3 (TATHB) 2 leads to a more crystalline framework with higher electrical conductivity value than previously reported. The improved crystallinity and analogous structure between TATHB and HAB enable the synthesis of Cu 3 (HAB) x (TATHB) 2-x with ligand compositions precisely controlled by precursor ratios. The electrical conductivity is tuned from 4.2 × 10 -8 to 2.9 × 10 -5 S cm -1 by simply increasing the nitrogen content in the crystal lattice. Furthermore, computational calculation supports that the solid solution facilitates the band structure tuning. In conclusion, it is envisioned that the findings not only shed light on the ligand-dependent structure–property relationship but create new prospects in synthesizing multicomponent electrically conductive metal-organic frameworks (MOFs) for tailoring optoelectronic device applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗