Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “shape measurement”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 829 records · Page 46
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Multidimensional Modeling of Mixture Formation in a Hydrogen-Fueled Heavy-Duty Optical Engine With Direct Injection

Hydrogen (H 2 ), as a carbon-free fuel, is considered as one of the most promising solutions to reduce the carbon footprint of hard-to-decarbonize energy and transportation sectors. As such, hydrogen-fueled internal combustion engines (H 2 ICEs) have recently been receiving increasing attention, particularly in applications such as on-road/off-road heavy-duty transport and combined heat and power. The direct injection (DI) of gaseous hydrogen into the combustion chamber offers great potential for achieving high power density and high engine efficiency, while mitigating the risk of backfire and reducing pre-ignition. However, the numerical simulation of H 2 DI system remains a formidable challenge associated with the high computational cost of reproducing compressible supersonic flow and shocks in narrow injector passages and in near-nozzle regions. In general, there is a lack of well-established and validated practices for the modeling of high-pressure H 2 DI in large-bore engines. Here, to this end, this study focuses on computational fluid dynamics (CFD) modeling of the mixture formation process in a heavy-duty optical engine employing a medium-pressure H 2 DI system. Both large eddy simulations (LES) and Reynolds Averaged Navier–Stokes (RANS) simulations are performed and evaluated against optical data. Gaseous hydrogen is injected into the combustion chamber via a centrally located outward opening hollow-cone injector at a pressure of 40 bar. Simulations are carried out for two injection timings, namely, −120 and −60 °CA. The numerical predictions for H 2 distribution in different horizontal and vertical planes during the compression stroke are systematically compared against optical data obtained through planar laser-induced fluorescence (PLIF) measurements. Overall, the LES approach using the Dynamic Structure model is found to have good predictive capabilities for the early jet penetration in terms of length and shape, as well as the later H 2 distributions. However, the unsteady RANS approach with the renormalization group $k - ϵ$ model, which is widely used by industry to model heavy-duty ICEs, significantly underpredicts the H 2 mixing, even at similar mesh resolution to that used in LES. These results indicate that there is a need for the improvement of mixing submodels within the RANS approach when applied to H 2 DI simulations.

LES↗
DOE OSTI2024

Multigap nodeless superconductivity in the topological semimetal PdTe

Recently, PdTe was identified as a spin-orbit-coupled topological Dirac semimetal and was claimed to exhibit both bulk-nodal and surface-nodeless superconducting gaps. Here we report on ultra-low-temperature thermal-conductivity measurements on PdTe single crystals with T c = 4.5 K to investigate its superconducting gap structure. It is found that the residual linear term κ 0 /T is negligible in zero magnetic field. Furthermore, the field dependence of κ 0 ⁡(H)/T exhibits an S-shaped curve. These results suggest that PdTe has multiple nodeless superconducting gaps, which is at odds with the claimed bulk-nodal gap. The reason for the discrepancy is likely that previous angle-resolved photoemission spectroscopy measurements were only performed down to 2 K and cannot observe the smaller nodeless gap. As a result, the fully gapped superconducting state in PdTe is compatible with it being a topological superconductor candidate.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2025

Emergence of Local Magnetic Moment in Ternary TaWSe 2 Single Crystal via Atomic Clustering

Ternary transition metal dichalcogenides (TMDs) provide a versatile platform to explore novel electronic and magnetic ground states via compositional substitution and local structural modulations. Using a combination of scanning tunneling microscopy and spectroscopy (STM/S), magnetic property measurements, and density functional theory (DFT) calculations, the emergence of local magnetic moments driven by the clustering of Ta atoms in ternary TaWSe 2 single crystals is analyzed. STM topography reveals triangular clusters of Ta atoms embedded within W-rich regions of TaWSe 2 . These clusters exhibit a consistent shape and an orderly arrangement throughout the surfaces. DFT calculations show that these Ta clusters induce local strain, giving rise to localized magnetic moments. The magnetic behavior is further corroborated by temperature-dependent magnetization measurements, which exhibit a magnetic anomaly at ∼50 K. In conclusion, this study offers a pathway to engineer magnetism in TMD systems with potential applications in spintronic and quantum materials.

DFT↗
DOE OSTI2025

High-fidelity holographic beam shaping with optimal transport and phase diversity

A phase-only spatial light modulator (SLM) provides a powerful way to shape laser beams into arbitrary intensity patterns but at the cost of a hard computational problem of determining an appropriate SLM phase. Here, we show that optimal transport methods can generate approximate solutions to this problem that serve as excellent initializations for iterative phase retrieval algorithms, yielding vortex-free solutions with superior accuracy and efficiency. Additionally, we show that analogous algorithms can be used to measure the intensity and phase of the input beam incident upon the SLM via phase diversity imaging. These techniques furnish flexible and convenient solutions to the computational challenges of beam shaping with an SLM.

47 OTHER INSTRUMENTATION↗
DOE OSTI2021

Intrinsic alignments of galaxies around cosmic voids

ABSTRACT The intrinsic alignments of galaxies, i.e. the correlation between galaxy shapes and their environment, are a major source of contamination for weak gravitational lensing surveys. Most studies of intrinsic alignments have so far focused on measuring and modelling the correlations of luminous red galaxies with galaxy positions or the filaments of the cosmic web. In this work, we investigate alignments around cosmic voids. We measure the intrinsic alignments of luminous red galaxies detected by the Sloan Digital Sky Survey around a sample of voids constructed from those same tracers and with radii in the ranges: [20–30; 30–40; 40–50] h−1 Mpc and in the redshift range z = 0.4−0.8. We present fits to the measurements based on a linear model at large scales, and on a new model based on the void density profile inside the void and in its neighbourhood. We constrain the free scaling amplitude of our model at small scales, finding no significant alignment at 1σ for either sample. We observe a deviation from the null hypothesis, at large scales, of 2σ for voids with radii between 20 and 30 h−1 Mpc, and 1.5σ for voids with radii between 30 and 40 h−1 Mpc and constrain the amplitude of the model on these scales. We find no significant deviation at 1σ for larger voids. Our work is a first attempt at detecting intrinsic alignments of galaxy shapes around voids and provides a useful framework for their mitigation in future void lensing studies.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2024

Characterization of EJ-270 and Ce-doped LiCAF scintillators for the development of high-rate neutron reflectometer detectors

The Second Target Station of the Spallation Neutron Source at Oak Ridge National Laboratory is anticipated to provide a neutron source with ∼20 times increase in peak brightness than the First Target Station. The neutron reflectometers currently in operation at the First Target Station need to be upgraded due to the increased neutron flux. A prototype neutron detector module based upon a pixelated scintillator array readout by silicon photomultipliers is being developed to address the high-rate challenge faced with future neutron reflectometer instruments at the Second Target Station. Two types of scintillator materials were considered for this detector development, i.e., 6 Li-loaded EJ-270 plastic scintillator and Ce-doped LiCAF single crystal. This paper reports the scintillator characterization results, including light yield, pulse shape discrimination performance, capability to detect thermal neutrons in a high γ-ray field, and γ-ray sensitivity. The number of photons produced per neutron capture by EJ-270 and LiCAF:Ce was measured to be 2176 ± 91 and 2651 ± 108, respectively. EJ-270 demonstrated a good capability to discriminate between neutrons and γ-rays by employing the commonly used charge comparison method (figure-of-merit: 1.13 ± 0.01 for an energy cut of 292–426 keVee) and a reasonable performance when using the time-over-threshold techniques; however, no discrimination was observed from LiCAF:Ce regardless of the pulse shape discrimination approaches utilized, making pulse height discrimination necessary for LiCAF:Ce to differentiate between neutrons and γ-rays. Both EJ-270 and LiCAF:Ce exhibited an acceptable capacity to detect thermal neutrons at high exposure rates up to approximately 584 mR/h. Furthermore, the γ-ray sensitivities measured with a 60 Co source at an exposure rate of around 1145 mR/h were determined to be (6.11 ± 0.87) × 10 −6 and (7.64 ± 1.08) × 10 −7 for EJ-270 and LiCAF:Ce, respectively.

EJ-270↗
DOE OSTI2022

(Towards) DNS of a Laboratory Lean CH4/H2 Low-Swirl Flame Impinging on an Inclined Wall

Due to downsizing trends, flame-wall interaction (FWI) is increasingly prominent in gas turbines (GTs). FWI has direct consequences on flame stabilization and pollutant emissions, but it is not well understood in turbulent flows representative of GTs. We present results from a direct numerical simulation (DNS) of a turbulent CH4/H2 model GT low-swirl laboratory-scale flame interacting with an inclined wall. The results from the laboratory flame include simultaneous measurements of velocity using stereo particle imaging velocimetry and OHxCH2O planar laser induced fluorescence. The adaptive-mesh refinement solver PeleLMeX is used, with 24-species, 105-reaction reduced Aramco chemical kinetics mechanism. The premixed fuel-air mixture consists of hydrogen-enriched methane with 70% hydrogen volume fraction and 0.4 equivalence ratio. The inflow is prescribed to match experimental measurements at the burner exit. Karlovitz and turbulent Reynolds numbers are 300 and 400, respectively. The simulation and experimental results show excellent agreement. The flame features a bowl-shape stabilization, with a corrugated, continuous flame front at the leading edge, followed by fragmented reaction zones downstream. A large diffuse cloud of CH2O is formed downstream of the quenching point. The simulation results indicate that the cloud of CH2O is the result of incomplete methane combustion, with CH2O "leaking" from the locally quenched reaction zones.The DNS provides fine-grain resolution of turbulence-flame-wall interaction that cannot be captured with experimental measurements. With access to the entire solution vector at each cell of the computational domain, the local quenching.

flame-wall interactions↗
DOE OSTI2022

Charge sharing in pixelated semiconductor sensors

The charge sharing between neighboring pixels in pixelated sensors can be used to measure particle or x-ray coordinates with accuracy better than the pixel pitch. The accurate model of the charge distribution shape is essential to achieve ultimate coordinate accuracy. The charge sharing is caused by charge carriers' diffusion on the path from the generation point to pixels. This paper is focused on the diffusion of the initially compact charge cloud in the field free region. The diffusion equation solutions are obtained using separation of variable and Fourier synthesis method for different initial conditions and resulting charge distributions are integrated over pixel areas. In conclusion, the look up table containing pre-calculated values for pixel charge fractions is proposed to speed up numerical calculations.

47 OTHER INSTRUMENTATION↗
DOE OSTI2022

Highly Oriented Organic Ferroelectric Films with Single-Crystal-Level Properties from Restrained Crystallization

Device applications often require thin film growth with quasi-two-dimensional morphology and crystallization which are not always compatible. In this work, we exploit the method of low-temperature deposition followed by restrained crystallization (LDRC) in the growth of crystalline organic molecular thin films, which tend to grow three-dimensionally with random orientations. We demonstrate that, for 2-methylbenzimidazole (MBI), a molecular ferroelectric that tends to crystalize in spherulites, the quasi-two-dimensional films can be grown using LDRC with highly oriented polar axes and single-crystal-level ferroelectric properties. The crystallization process was shown to occur during the post-deposition annealing process using the in situ electrical measurements. The limited diffusion, low nucleation density, and low activation energy was found critical for the formation of the plate-shaped quasi-two-dimensional films. These results mark an important step in elucidating the LDRC as an effective and general approach for fabricating films with balanced crystallinity and morphology which are critical for applications.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Structure and Sulfur: Tuning the Viscoelastic and Surface Properties of Natural Keratin Fibers

Natural keratin fibers, such as wool, possess a complex hierarchical structure that governs their mechanical properties and surface energy. However, the extent to which these characteristics are influenced by combined contributions of structural variations (e.g., fiber diameter, intermediate filament (IF) packing) and chemical composition (e.g., disulfide bond density) remains poorly understood. In this study, we investigate wool fibers from five sheep breeds (Merino, Polwarth, Cheviot, Eider, and Devon) to elucidate how these factors influence viscoelasticity and surface interactions. Using a multimodal approach integrating interfacial and bulk characterization methods, including inverse gas chromatography (IGC), atomic force microscopy-infrared spectroscopy (AFM-IR), X-ray photoelectron spectroscopy (XPS), uniaxial tensile testing, and synchrotron small-angle X-ray scattering (SAXS), we show that the nanometer-thick 18-methyleicosanoic acid (18-MEA) layer is consistently present across all wool types and plays a key role in governing hydrophobicity and surface heterogeneity. A controlled isothermal treatment at 200 °C, designed to cleave disulfide bonds, results in a nearly 40% reduction in specific surface area across all fiber types, accompanied by a significant decrease in tensile strength and 80% reduction in elongation at break for Merino and Devon wool, but limited influence on the mechanical properties of Eider fibers. Furthermore, rate-dependent tensile testing within the elastic regime reveals distinct viscoelastic responses among the fiber types, suggesting that the sulfur-rich protein matrix surrounding IFs and its structure contribute actively to stress partitioning. Altogether, when combined with conclusions from SAXS measurements of IF spacing, our work offers compelling insights into the role of the keratin-associated protein (KAP) matrix in shaping wool fiber mechanics. Differences in mechanical behavior among wool types, despite similar IF spacing or sulfur content, highlight the importance of matrix composition and cross-linking density, suggesting that the molecular architecture of the KAP network may be a dominant factor in determining fiber performance.

X-ray scattering↗
DOE OSTI2026

Organic carbon oxidation state shapes fermentative methanogenic microbiomes and controls greenhouse gas fluxes

Organic compounds with a negative nominal oxidation state of carbon (NOSC) are thermodynamically recalcitrant in anaerobic ecosystems, but few studies have measured the influence of NOSC on carbon degradation rates, gaseous product yields, or microbiome composition. We amended anaerobic rice paddy sediment microcosms with water-soluble monomeric organic carbon compounds varying in NOSC. Consistent with thermodynamic and stoichiometric predictions, negative NOSC compounds are catabolized more slowly but produce more methane per mole of carbon. Negative NOSC microbiomes have higher alpha diversity, more syntrophs and methanogens, and fewer fermentative bacteria. Strikingly, fermentative bacterial taxa display genomically encoded NOSC catabolic preferences both in the lab and field. Negative NOSC-preferring fermenters have longer predicted doubling times, consistent with the thermodynamic recalcitrance of their preferred substrates. We propose that microbial NOSC catabolic preferences may reflect the thermodynamic niche of microorganisms and we anticipate that extending research on microbial catabolic preferences to a greater variety of organic carbon substrates and diverse microbiomes will improve our understanding of microbial carbon cycling and trait evolution.

Hu, Ruiwen↗
DOE OSTI2024

Explicit simulation of the Brownian rotation of arbitrary shaped aerosol particles using quaternions

The shape of an aerosol particle strongly influences its mass and momentum transfer cross-sections, charging properties, and other physical properties. Here, we present an explicit time-stepping procedure to simulate the rotational Brownian motion of arbitrary shaped aerosol particles by solving Euler’s equation of rotation. A Langevin formulation of the rotation equations is used, wherein Brownian motion due to thermal collisions between a particle and background gas molecules is represented using a stochastic fluctuating torque and fluid resistance is included as a drag torque. To avoid singularities associated with describing the orientation of a shape with Euler angles, we employ a quaternion formulation that leads to first-order stochastic differential equations to describe the evolution of the angular position and angular velocity of a rigid body. We perform all the rotational dynamics calculations in the body-fixed frame of reference attached to the rotating shape whose basis vectors are the normalized eigenvectors of the inertia tensor of the particle. Numerical solutions to rotation under torque-free conditions, damped rotation without Brownian motion, and stochastic rotation for arbitrary shapes are presented and discussed. The presented method enables time-resolved simulation of Brownian rotation for direct comparison with experimentally measured trajectories or statistical measures. The second order accuracy of the used time-stepping procedure places a severe restriction on the timestep that can be used for obtaining accurate results. Animations of presented simulations are included for visualizing rotational motion at various gas pressures. To aid implementation, MATLAB ® codes are also provided. Extension to include translation Brownian motion is straightforward.

Roy, Mrittika↗
DOE OSTI2022

Intrinsic Fano factor of nuclear recoils for dark matter searches

Nuclear recoils in germanium and silicon are shown to have much larger variance in electron-hole production than their electron recoil counterparts for recoil energies between 10 and 200 keV. This effect—owing primarily to deviations in the amount of energy given to the crystal lattice in response to a nuclear recoil of a given energy—has been predicted by the Lindhard model. Here, we parametrize the variance in terms of an intrinsic nuclear recoil Fano factor that is 24.3 ± 0.2 and 26 ± 8 at around 25 keV for silicon and germanium, respectively. The variance has important effects on the expected signal shapes for experiments utilizing low-energy nuclear recoils such as direct dark matter searches and coherent neutrino-nucleus scattering measurements.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2025

Universality in the Near-Side Energy-Energy Correlator

We investigate the energy-energy correlator (EEC) of hadrons produced on the same side in e + e − annihilation or in leading jets in p p collisions. We observe a remarkable universality of the correlator. Using a nonperturbative transverse momentum dependent (TMD) fragmentation function to model the transition from the “free-hadron” region to the perturbative collinear region, we are able to describe the near-side shapes and peaks over a wide range of energy for both the e + e − annihilation and the p p jet substructure measurements in terms of just two parameters. We present further predictions for the ratio of the projected three-point energy correlator to the EEC. The excellent agreement between our calculations and the experimental data may provide new insights into the role of nonperturbative physics for EECs, and suggests the possibility of exploring nonperturbative TMDs using theoretical tools developed for the energy correlators. Published by the American Physical Society 2025

Liu, Xiaohui (ORCID:0000000277011205)↗
DOE OSTI2021

Progress Report on Graphite-Salt Interaction Studies (FY21)

This report summarizes the activities performed in FY21 to investigate the interactions between nuclear graphite and molten salts, such as FLiNaK. First, building on last year’s achievements, the team improved the procedure for measurements on pressurized salt intrusion in nuclear graphite and performed new experiments at variable pressures with specimens of different sizes and shapes. Additionally, the team actively provided suggestions and comments for ASTM D8091, Standard Guide for Impregnation of Graphite with Molten Salts , which came up for periodic revision in 2021. Second, the team expanded its capabilities to further characterize salt-impregnated graphite by procuring and installing a laser-induced breakdown spectroscopy (LIBS) instrument capable of producing a 3D chemical composition of a surface and subsurface region of specimens. A methodology for accurately analyzing information was developed, and a manuscript was submitted for publication. The LIBS instrument sample cell is sealed in controlled inert atmosphere, which is an advantage for using humidity-sensitive samples and Be-contaminated samples. This aligns with the team’s effort to expand the capabilities of handling FLiBe and Becontaining materials in two newly installed glovebox units. Third, the team performed preliminary tribology tests for pebble graphite wear in contact with stainless steel in dry state and in molten salt at high temperature. These tests are needed to establish the baseline for the wear of pebble graphite by friction against metallic walls. The friction and wear of pebbles in the fluoride salt-cooled hightemperature reactor are expected to generate dust, which is a concern for other components’ properties and safe reactor operation.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2023

Ab initio Geochemistry of Hydrous Phases (Final Report)

Hydrous phases are among the most important Earth components. They are important for a broad suite of Earth processes, including the origin of life. From both thermodynamic and structural perspectives, however, they represent some of the most complex naturally occurring materials: their bonding often includes a combination of covalent solid, weak ionic, van der Waals, and hydrogen bonding, all within large unit cells. Most are solid solutions, and many are prone to variations in layer packing. Thermodynamic modeling of these materials is fundamental for understanding present and past natural processes, including those that shaped—and continue to shape—the structure and evolution of our planet. Yet, the thermodynamic properties of these materials at appropriate conditions are challenging to measure. To make significant progress and attain a deep understanding of these materials requires an atomistic theoretical approach.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Characterization of ORNL PSD ASIC

The performance of the ORNL ASIC and its readout system was tested with pixelated organic scintillators. We use a pixelated trans-Stilbene scintillator array from Inrad Optics and a pixelated organic glass scintillator array developed at Sandia National Laboratories to characterize the energy and timing resolutions and the pulse-shape discrimination (PSD) figure-of-merit (FoM). The results are compared to previous work in which the same metrics were measured on waveforms digitized at 250 MHz with 14-bit resolution. We found that the PSD FoM at 340 keVee of the ASIC configuration compared to waveform data varied with the scintillator type. We measured a PSD FoM of 1.12 ± 0.14 with the ASIC configuration versus 1.39 ± 0.23 with waveform data using the trans-Stilbene array. We measured a PSD FoM of 0.52 ± 0.18 with the ASIC configuration versus 1.25 ± 0.19 with waveform data using the the organic glass scintillator array. The coincidence timing resolution was measured using two 6x6x6 mm 3 cubes of trans-Stilbene. It was measured to be 805 ± 9 ps with the ASIC configuration versus 300 ps on average with waveform data.

42 ENGINEERING↗
DOE OSTI2020

Multi-Element Water Content System Instrument Handbook

The SEA Model WCM-2000 multi-element water content system was designed to provide aircraft and wind tunnel users with a single, rugged sensor to simultaneously measure liquid water content (LWC), total water content (TWC), and ice water content (IWC). The instrument consists of four heated stainless steel elements, each with a different shape or size. Each element is directly heated by low-voltage DC current flowing through the element. These elements are maintained at a constant temperature, typically 140°C, by a digital closed-loop control system. Three of the heated elements are exposed directly to the airstream and incoming cloud water. A fourth element, the reference/comp element, is arranged to be exposed to the airflow but not to incoming cloud water. This element is used to establish the “dry power term” that is subtracted from the other three elements’ power readings to establish the measured water content.

54 ENVIRONMENTAL SCIENCES↗