Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “ionizing radiation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 829 records · Page 46

Dense clumps of ionized gas near Pi Scorpii, as revealed by the fine-structure excitation of N II

The column density and the emission of the ionized gas along the line of sight toward the B1 V + B2 V binary star Pi Sco are measured on the basis of the fine-structure absorption lines of the ground state N II. It is found that the bulk of this ionized gas must be clumped on a length scale of 0.025 pc, which is far smaller than the observed size of the diffuse H II region surrounding Pi Sco of about 6 pc. The observed column density of S III toward Pi Sco yields an upper limit on the distance of the absorbing, clumped gas from the star of less than about 0.02 pc, assuming that both the N II and S III absorption arise from the same gas. The possibility that the ionized gas originates from a photoevaporating circumstellar disk directly surrounding Pi Sco is excluded, since such a disk would have an unusual size of order 0.025 pc and would have had to survive for the estimated age of Pi Sco of 5-8 Myr. The derived mean density of the clumped gas is of order 40/cu cm, so that the gas is at a pressure that far exceeds the mean pressure in the H II region. It is concluded that the ionized gas could originate from evaporation flows off a cluster of compact neutral objects that evaporate due to the ionizing radiation of Pi Sco.

Bertoldi, Frank↗

High angular resolution far-infrared observations of Sagittarius B2

High-angular-resolution FIR observations of the continuum emission from the Sagittarius B2 molecular cloud core are reported. Evidence is found for a significantly spatially extended component of the FIR emission at 50- and 100-micron wavelength, which has an angular extent of 1 x 2 arcmin. Its approximate spatial coincidence with a low-level extended component of the radio free-free emission and with the portion of the SGR B2 core having densities not less than 10 exp 5 cu cm derived from molecular observations suggests that the ionizing radiation from the massive stars in the compact sources is diffusing through a region with a beam-averaged visual extinction not less than a few hundred mag. It is inferred that the gas and the dust in the central portion of the cloud surrounding the compact radio free-free/FIR sources are highly clumped.

Goldsmith, Paul F.↗

A preliminary analysis of atomic oxygen dayglow using solar EUV measurements from ASSI

The mechanisms governing the interactions between two of the fundamental components of the solar-terrestrial system - solar ionizing radiation and the earth's upper atmosphere - are investigated. The physical parameters of the EUV emissions resulting from these interactions are characterized so that EUV remote sensing can gainfully be employed as a quantitative diagnostic of the terrestrial atmosphere and plasma environment. This analysis uses the solar flux measurements of the Airglow and Solar Spectrometer Instrument (ASSI) on board the San Marco D/L satellite. Preliminary modeling results of the altitude and zenith angle distribution of these emissions are presented along with the data.

Chakrabarti, S.↗

Assessment of environmental effects on Space Station Freedom Electrical Power System

Analyses of EPS (electrical power system) interactions with the LEO (low earth orbit) environment are described. The results of these analyses will support EPS design so as to be compatible with the natural and induced environments and to meet power, lifetime, and performance requirements. The environmental impacts to the Space Station Freedom EPS include aerodynamic drag, atomic oxygen erosion, ultraviolet degradation, VXB effect, ionizing radiation dose and single event effects, electromagnetic interference, electrostatic discharge, plasma interactions (ion sputtering, arcing, and leakage current), meteoroid and orbital debris threats, thermal cycling effects, induced current and voltage potential differences in the SSF due to induced electric field, and contamination degradation.

Lu, Cheng-Yi↗

Vertical-Bloch-Line Memory

Vertical-Bloch-line memory is developmental very-large-scale integrated-circuit block-access magnetic memory. Stores data in form of localized pairs of twists (VBL pairs) in magnetic field at edge of ferromagnetic domain in each stripe. Presence or absence of VBL pair at bit position denotes one or zero, respectively. Offers advantages of resistance to ionizing radiation, potential areal storage density approximately less than 1 Gb/cm squared, data rates approximately less than 1 Gb/s, and average access times of order of milliseconds. Furthermore, mass, volume, and demand for power less than other magnetic and electronic memories.

Katti, Romney R.↗

Three-Dimensional Magnetic-Bubble Memory System

Proposed magnetic-bubble memory system includes stack of two-dimensional memory modules. Design enables overall storage density of system to be greater than prior magnetic-bubble memories. Provides nonvolatile storage, with readout access times in millisecond range. Has partly parallel input/output configuration supporting high-performance computing. Also relatively invulnerable to damage by ionizing radiation. Binary data, as represented by direction of magnetization of magnetic bubbles, reads out via Faraday effect.

Katti, Romney R.↗

X-Ray-Diffraction Tests Of Irradiated Electronic Devices: I

X-ray-diffraction tests performed on aluminum conductors in commercial HI1-507A complementary metal oxide/semiconductor (CMOS) integrated-circuit analog multiplexers, both before and after circuits exposed to ionizing radiation from Co(60) source, and after postirradiation annealing at ambient and elevated temperatures. Tests in addition to electrical tests performed to determine effects of irradiation and of postirradiation annealing on electrical operating characteristics of circuits. Investigators sought to determine whether relationship between effects of irradiation on devices and physical stresses within devices. X-ray diffraction potentially useful for nondestructive measurement of stresses.

Shaw, David C.↗

X-Ray-Diffraction Tests Of Irradiated Electronic Devices: II

Report describes research on use of x-ray diffraction to measure stresses in metal conductors of complementary metal oxide/semiconductor (CMOS) integrated circuits exposed to ionizing radiation. Expanding upon report summarized in "X-Ray-Diffraction Tests Of Irradiated Electronic Devices: I" (NPO-18803), presenting data further suggesting relationship between electrical performances of circuits and stresses and strains in metal conductors.

Shaw, David C.↗

LDEF materials: An overview of the interim findings

The flight and retrieval of the National Aeronautics and Space Administration's Long Duration Exposure Facility (LDEF) provided an opportunity for the study of the low-Earth orbit (LEO) environment and long-duration space environmental effect (SEE) on materials that are unparalleled in the history of the U.S. space program. The 5.8-year flight of LDEF greatly enhanced the potential value of materials data from LDEF to the international SEE community, compared to that of the original 1-year flight plan. The remarkable flight attitude stability of LDEF enables specific analyses of various individual and combined effects of LEO environmental parameters on identical materials of the same space vehicle. NASA recognized the potential by forming the LDEF Space Environmental Effects on Materials Special Investigation Group (MSIG) to address the greatly expanded materials and LEO space environment parameter analysis opportunities available in the LDEF structure, experiment trays, and corollary measurements, so that the combined value of all LDEF materials data to current and future space missions will be assessed and documented. This paper provides an overview of the interim LDEF materials findings of the Principal Investigators and the Materials Special Investigation Group. These revelations are based on observations of LEO environmental effects on materials made in-space during LDEF retrieval and during LDEF tray deintegration at the Kennedy Space Center, and on findings of approximately 1.5 years of laboratory analyses of LDEF materials by the LDEF materials scientists. These findings were extensively reviewed and discussed at the MSIG-sponsored LDEF Materials Workshop '91. The results are presented in a format which categorizes the revelations as 'clear findings' or 'confusing/unexplained findings' and resultant needs for new space materials developments and ground simulation testing/analytical modeling in seven categories: environmental parameters and data bases; LDEF contamination; thermal control coatings and protective treatments; polymers and films; polymer-matrix composites; metals, ceramics, and optical materials; and systems-related materials. General outlines of findings of the other LDEF Special Investigation Groups (Ionizing Radiation, Meteoroid and Debris, and Systems) are also included. The utilization of LDEF materials data for future low-earth orbit missions is also discussed, concentrating on Space Station Freedom. Some directions for continuing studies of LDEF materials are outlined. In general, the LDEF data is remarkable consistent; LDEF will provide a 'benchmark' for materials design data bases for satellites in low-Earth orbit. Some materials were identified to be encouragingly resistant to LEO SEE for 5.8-years; other 'space qualified' materials displayed significant environmental degradation. Molecular contamination was widespread; LDEF offers an unprecedented opportunity to provide a unified perspective of unmanned LEO spacecraft contamination mechanisms. New material development requirements for long-term LEO missions have been identified and current ground simulation testing methods/data for new, durable materials concepts can be validated with LDEF results. LDEF findings are already being integrated into the design of Space Station Freedom.

Stein, Bland A.↗

Katz model prediction of Caenorhabditis elegans mutagenesis on STS-42

Response parameters that describe the production of recessive lethal mutations in C. elegans from ionizing radiation are obtained with the Katz track structure model. The authors used models of the space radiation environment and radiation transport to predict and discuss mutation rates for C. elegans on the IML-1 experiment aboard STS-42.

Cucinotta, Francis A.↗

Equilibrium slab models of Lyman-alpha clouds

Solutions for the equilibrium configuration of a slab with ionizing radiation incident equally from both sides are explored. Radiation effects (photoionization, Ly-alpha photon trapping, and mock gravity) as well as external pressure and self gravity (with and without dark matter) are included. The general formalism is applied to structure growth on small scales at very high z due to mock gravity on dust. Emphasis is placed on the application of slab models at z of less than 5, particularly those that may correspond to Ly-alpha forest, Lyman limit, and damped Ly-alpha systems. The regime with a dominant outward force contributed by trapping of Ly-alpha photons is discussed. General expressions are given for the equilibrium, including dark matter, assuming various relationships between the density of the dark matter halo and the total gas column density.

Charlton, Jane C.↗

Diagnosing the reionization of the universe - The absorption spectrum of the intergalactic medium and Lyman alpha clouds

The thermal and ionization evolution of a uniform intergalactic medium composed of H and He and undergoing reionization is studied. The diagnosis of the metagalactic ionizing radiation background at z of about three using metal line ratios for Lyman limit quasar absorption line systems is addressed. The use of the He II Gunn-Peterson effect to diagnose the reionization source and/or nature of the Hy-alpha forest clouds is considered.

Giroux, Mark L.↗

Effects of low earth orbit

The effects of low earth orbit on the Long-Duration Exposure Facility (LDEF) spacecraft are reported. The LDEF spacecraft was deployed in low earth orbit in 1984 and was retrieved in 1990. The structure and design of LDEF is described. The dose of ionizing radiation received, data obtained, and its effects on the satellite are discussed. Atomic oxygen surface effects, oxygen induced damage, and damage from meteoroids and man-made debris are examined and an analysis of meteoroid impacts is presented. The effects of molecular and particulate contamination of the spacecraft's surface and instrument damage were analyzed. Post-flight analysis of LDEF's framework and experiments provided much information about the space environment and its effects on spacecraft materials and will be useful in the design of long-lived large space structures.

Murr, Lawrence E.↗

A hydrodynamic treatment of the tilted cold dark matter cosmological scenario

A standard hydrodynamic code coupled with a particle-mesh code is used to compute the evolution of a tilted cold dark matter (TCDM) model containing both baryonic matter and dark matter. Six baryonic species are followed, with allowance for both collisional and radiative ionization in every cell. The mean final Zel'dovich-Sunyaev y parameter is estimated to be (5.4 +/- 2.7) x 10 exp -7, below currently attainable observations, with an rms fluctuation of about (6.0 +/- 3.0) x 10 exp -7 on arcmin scales. The rate of galaxy formation peaks at a relatively late epoch (z is about 0.5). In the case of mass function, the smallest objects are stabilized against collapse by thermal energy: the mass-weighted mass spectrum peaks in the vicinity of 10 exp 9.1 solar masses, with a reasonable fit to the Schechter luminosity function if the baryon mass to blue light ratio is about 4. It is shown that a bias factor of 2 required for the model to be consistent with COBE DMR signals is probably a natural outcome in the present multiple component simulations.

Cen, Renyue↗

Optically Addressable, Ferroelectric Memory With NDRO

For readout, memory cells addressed via on-chip semiconductor lasers. Proposed thin-film ferroelectric memory device features nonvolatile storage, optically addressable, nondestructive readout (NDRO) with fast access, and low vulnerability to damage by ionizing radiation. Polarization switched during recording and erasure, but not during readout. As result, readout would not destroy contents of memory, and operating life in specific "read-intensive" applications increased up to estimated 10 to the 16th power cycles.

Thakoor, Sarita↗

Nonvolatile GaAs Random-Access Memory

Proposed random-access integrated-circuit electronic memory offers nonvolatile magnetic storage. Bits stored magnetically and read out with Hall-effect sensors. Advantages include short reading and writing times and high degree of immunity to both single-event upsets and permanent damage by ionizing radiation. Use of same basic material for both transistors and sensors simplifies fabrication process, with consequent benefits in increased yield and reduced cost.

Katti, Romney R.↗

Tracking Steady Light Sources Amid Luminous Transients

The Transient Event Rejection for Acquisition and Tracking (TERAT) algorithm governs operation of image-data-acquisition and -processing system. TERAT processes digitized image data to acquire (that is, identify) candidate steady source of light, validate candidate source, and track validated source, all in presence of real or apparent luminous transients represented in image data. Source of light tracked could be star or distant luminous beacon. Transients caused by impacts of ionizing radiation on imaging array of photodetectors or by unsteady light sources not meant to be tracked. TERAT functions with limited data-processing resources. TERAT algorithm currently operational on NASA's TOPEX mission.

Kissh, Frank↗

Three-Dimensional Vertical-Bloch-Line Memory System

In proposed magnetic memory system without moving parts, data is stored in stack of two-dimensional vertical-Bloch-line (VBL) memory chips or modules. System similar to one described in "Three-Dimensional Magnetic-Bubble Memory System" (NPO-18533). Each VBL module in this memory system silimar to module described in "Vertical-Bloch-Line Memory" (NPO-18467). Advantages include high storage density, high speed, nonvolatility, and insensitivity to ionizing radiation.

Katti, Romney R.↗