Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “fourier analysis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 829 records · Page 46
All sourcesNASA NTRSDOE OSTI
NASA NTRS1995

Ozone vertical distribution retrieval from ground-based high resolution infrared solar spectra

A practical procedure for the retrieval of ozone vertical profiles from ground-based high resolution Fourier transform infrared solar spectra has been developed. The analysis is based on a multilayer line-by-line forward model and a semi-empirical version of the optimal estimation inversion method of Rodgers. The 1002.6-1003.2 cm(exp -1) spectral interval has been selected for the analysis on the basis of synthetic spectrum calculations. This interval contains numerous ozone lines covering a range of intensities and providing retrieval sensitivity from ground level to about 35 km. Characterization of the method and an error analysis have been performed. For a spectral resolution of 0.05-0.01 cm(exp -1) and a signal-to-noise ratio greater than or equal to 100 the retrieval is stable with a vertical resolution of approximately 5 km attainable near the surface degrading to approximately 10 km in the stratosphere. Synthetic spectra studies show that the a priori profile and weak constraints selected for the retrievals introduce no significant biases for a wide range of ozone profiles.

Pougatchev, N. S.↗
NASA NTRS1998

Hard X-Ray Lags in GRO J1719-24

We have used the Fourier cross spectra of GRO J1719-24. as obtained with BATSE, to estimate the phase lags between the X-ray flux variations in the 20-,50 and 50-100 keV energy bands as a function of Fourier frequency in the interval 0.002-0.488 Hz. Our analysis covers the entire approximately 80 day X-ray outburst of this black-hole candidate, following the first X-ray detection on 1993 September 25. The X-ray variations in the 50-100 keV band, lag those in the 20-50 keV energy band by an approximately constant phase difference of 0.072 +/- 0.010 rad in the frequency interval 0.02-0.20 Hz. The time lags of GRO J1719-24 decrease with frequency as a power law, with index 1.04 +/- 0.13 for frequencies >/= 0.01 Hz. These results are discussed together with those obtained in recent similar studies of the black-hole candidates Cyg X-1 and GRO J0422+32.

VanderHooft, Frank↗
NASA NTRS1999

Hard X-Ray Lags in GRO J1719--24

We have used the Fourier cross spectra of GRO J1719-24, obtained with BATSE, to estimate the phase lags between the X-ray flux variations in the 20 50 and 50-100 keV energy bands as a function of Fourier frequency in the interval 0.002-0.488 Hz. Our analysis covers the entire about 80 day X-ray outburst of this black hole candidate, following the first X-ray detection on 1993 September 25. The X-ray variations in the 50-100 keV band lag those in the 20-50 keV energy band by an approximately constant phase difference of 0.072 + 0.010 rad in the frequency interval 0.02-0.20 Hz. The peak phase lags in the interval 0.02-0.20 Hz are about twice those of Cyg X-1 and GRO J0422+32. These results are consistent with models for Comptonization regions composed of extended nonuniform clouds around the central source.

VanDerHooft, F.↗
NASA NTRS1996

Fundamental relations between short-term RR interval and arterial pressure oscillations in humans

BACKGROUND: One of the principal explanations for respiratory sinus arrhythmia is that it reflects arterial baroreflex buffering of respiration-induced arterial pressure fluctuations. If this explanation is correct, then elimination of RR interval fluctuations should increase respiratory arterial pressure fluctuations. METHODS AND RESULTS: We measured RR interval and arterial pressure fluctuations during normal sinus rhythm and fixed-rate atrial pacing at 17.2+/-1.8 (SEM) beats per minute greater than the sinus rate in 16 healthy men and 4 healthy women, 20 to 34 years of age. Measurements were made during controlled-frequency breathing (15 breaths per minute or 0.25 Hz) with subjects in the supine and 40 degree head-up tilt positions. We characterized RR interval and arterial pressure variabilities in low-frequency (0.05 to 0.15 Hz) and respiratory-frequency (0.20 to 0.30 Hz) ranges with fast Fourier transform power spectra and used cross-spectral analysis to determine the phase relation between the two signals. As expected, cardiac pacing eliminated beat-to-beat RR interval variability. Against expectations, however, cardiac pacing in the supine position significantly reduced arterial pressure oscillations in the respiratory frequency (systolic, 6.8+/-1.8 to 2.9 +/-0.6 mm Hg2/Hz, P=.017). In contrast, cardiac pacing in the 40 degree tilt position increased arterial pressure variability (systolic, 8.0+/-1.8 to 10.8 +/-2.6, P=.027). Cross-spectral analysis showed that 40 degree tilt shifted the phase relation between systolic pressure and RR interval at the respiratory frequency from positive to negative (9 +/-7 degrees versus -17+/-11 degrees, P=.04); that is, in the supine position, RR interval changes appeared to lead arterial pressure changes, and in the upright position, RR interval changes appeared to follow arterial pressure changes. CONCLUSIONS: These results demonstrate that respiratory sinus arrhythmia can actually contribute to respiratory arterial pressure fluctuations. Therefore, respiratory sinus arrhythmia does not represent simple baroreflex buffering of arterial pressure.

NASA Discipline Cardiopulmonary↗
NASA NTRS2010

Use of Modal Acoustic Emission to Monitor Damage Progression in Carbon Fiber/Epoxy and Implications for Composite Structures

Broad-band modal acoustic emission (AE) data was used to characterize micromechanical damage progression in uniaxial IM7 and T1000 carbon fiber-epoxy tows and an IM7 composite overwrapped pressure vessel (COPV) subjected to an intermittent load hold tensile stress profile known to activate the Felicity ratio (FR). Damage progression was followed by inspecting the Fast Fourier Transforms (FFTs) associated with acoustic emission events. FFT analysis revealed the occurrence of cooperative micromechanical damage events in a frequency range between 100 kHz and 1 MHz. Evidence was found for the existence of a universal damage parameter, referred to here as the critical Felicity ratio, or Felicity ratio at rupture (FR*), which had a value close to 0.96 for the tows and the COPV tested. The implications of using FR* to predict failure in carbon/epoxy composite materials and related composite components such as COPVs are discussed. Trends in the FFT data are also discussed; namely, the difference between the low and high energy events, the difference between early and late-life events, comparison of IM7 and T1000 damage progression, and lastly, the similarity of events occurring at the onset of significant acoustic emission used to calculate the FR.

Waller, J. M.↗
NASA NTRS1975

Research study on stabilization and control. Modern sampled-date control theory. Stability analysis of the low cost large space telescope system

A mathematical model employing Fourier series is used to show quantization and reaction wheel friction nonlinearity in a telescope system for use in space. Block diagrams are used to illustrate the system. A discrete describing function of a quantizer also is given, and input and output signal waveforms, with illustrative examples, are shown.

Kuo, B. C.↗
NASA NTRS2011

Time-Frequency Analysis of Rocket Nozzle Wall Pressures During Start-up Transients

Surveys of the fluctuating wall pressure were conducted on a sub-scale, thrust- optimized parabolic nozzle in order to develop a physical intuition for its Fourier-azimuthal mode behavior during fixed and transient start-up conditions. These unsteady signatures are driven by shock wave turbulent boundary layer interactions which depend on the nozzle pressure ratio and nozzle geometry. The focus however, is on the degree of similarity between the spectral footprints of these modes obtained from transient start-ups as opposed to a sequence of fixed nozzle pressure ratio conditions. For the latter, statistically converged spectra are computed using conventional Fourier analyses techniques, whereas the former are investigated by way of time-frequency analysis. The findings suggest that at low nozzle pressure ratios -- where the flow resides in a Free Shock Separation state -- strong spectral similarities occur between fixed and transient conditions. Conversely, at higher nozzle pressure ratios -- where the flow resides in Restricted Shock Separation -- stark differences are observed between the fixed and transient conditions and depends greatly on the ramping rate of the transient period. And so, it appears that an understanding of the dynamics during transient start-up conditions cannot be furnished by a way of fixed flow analysis.

Baars, Woutijn J.↗
NASA NTRS1991

Study of balloon and thermal control material degradation aboard LDEF

The initial results of analysis performed on a number of polymeric materials which were exposed aboard the Long Duration Exposure Facility (LDEF) are discussed. These materials include two typical high altitude balloon films (a polyester and a polyethylene) and silver-backed Teflon from thermal control blanket samples. The techniques used for characterizing changes in mechanical properties, chemical structure and surface morphology include Fourier Transform Infrared (FTIR) spectroscopy, scanning electron microscopy, and dynamic mechanical analysis.

Letton, Alan↗
NASA NTRS1981

A computer program for estimating the power-density spectrum of advanced continuous simulation language generated time histories

A computer program for performing frequency analysis of time history data is presented. The program uses circular convolution and the fast Fourier transform to calculate power density spectrum (PDS) of time history data. The program interfaces with the advanced continuous simulation language (ACSL) so that a frequency analysis may be performed on ACSL generated simulation variables. An example of the calculation of the PDS of a Van de Pol oscillator is presented.

Dunn, H. J.↗
DOE OSTI2020

Flash Graphene from Plastic Waste

In this work, an approach to upcycling plastic waste (PW) products is presented. The method relies on flash Joule heating (FJH) to convert PW into flash graphene (FG). In addition to FG, the process results in the formation of carbon oligomers, hydrogen, and light hydrocarbons. In order to make high quality graphene, a sequential alternating current (AC) and direct current (DC) flash is used. Here, the FJH process requires no catalyst and works for PW mixtures, which makes the process suitable for handling landfill PW. The energy required to convert PW to FG is ~ 23 kJ/g or ~ $125 in electricity per ton of PW, potentially making this process economically attractive for scale-up. The FG was characterized by Raman spectroscopy and had a I 2D /I G peak ratio up to 6 with a low-intensity D band. Moreover, transmission electron microscopy and X-ray diffraction analysis show that the FG is turbostratic with an interlayer spacing of 3.45 Å. The large interlayer spacing will facilitate its dispersion in liquids and composites. Analysis of FG dispersions in 1% Pluronic aqueous solution shows that concentrations up to 1.2 mg/mL can be achieved. The carbon oligomers that distilled from the process were characterized by Fourier-transform infrared spectroscopy and have chemical structures similar to the starting PW. Initial analysis of gas phase products shows the formation of considerable amounts of hydrogen along with other light hydrocarbons. Since graphene is naturally occurring and it shows a low toxicity profile, this could be an environmentally beneficial method to upcycle PE.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Characterization of plasma catalytic decomposition of methane: role of atomic O and reaction mechanism

In this work, we investigated atmospheric pressure plasma jet (APPJ)-assisted methane oxidation over a Ni-SiO 2 /Al 2 O 3 catalyst. We evaluated possible reaction mechanisms by analyzing the correlation of gas phase, surface and plasma-produced species. Plasma feed gas compositions, plasma powers, and catalyst temperatures were varied to expand the experimental parameters. Real-time Fourier-transform infrared spectroscopy was applied to quantify gas phase species from the reactions. The reactive incident fluxes generated by plasma were measured by molecular beam mass spectroscopy using an identical APPJ operating at the same conditions. A strong correlation of the quantified fluxes of plasma-produced atomic oxygen with that of CH 4 consumption, and CO and CO 2 formation implies that O atoms play an essential role in CH 4 oxidation for the investigated conditions. With the integration of APPJ, the apparent activation energy was lowered and a synergistic effect of 30% was observed. We also performed in-situ diffuse reflectance infrared Fourier-transform spectroscopy to analyze the catalyst surface. The surface analysis showed that surface CO abundance mirrored the surface coverage of CH n at 25 °C. This suggests that CH n adsorbed on the catalyst surface as an intermediate species that was subsequently transformed into surface CO. We observed very little surface CH n absorbance at 500 °C, while a ten-fold increase of surface CO and stronger CO 2 absorption were seen. This indicates that for a nickel catalyst at 500 °C, the dissociation of CH 4 to CHn may be the rate-determining step in the plasma-assisted CH 4 oxidation for our conditions. We also found the CO vibrational frequency changes from 2143 cm –1 for gas phase CO to 2196 cm –1 for CO on a 25 °C catalyst surface, whereas the frequency of CO on a 500 °C catalyst was 2188 cm –1 . Here, the change in CO vibrational frequency may be related to the oxidation of the catalyst.

methane oxidation↗
DOE OSTI2022

An insight into microscopy and analytical techniques for morphological, structural, chemical, and thermal characterization of cellulose

Cellulose obtained from plants is a bio-polysaccharide and the most abundant organic polymer on earth that has immense household and industrial applications. Hence, the characterization of cellulose is important for determining its appropriate applications. In this article, we review the characterization of cellulose morphology, surface topography using microscopic techniques including optical microscopy, transmission electron microscopy, scanning electron microscopy, and atomic force microscopy. Additionally, other physicochemical characteristics like crystallinity, chemical composition, and thermal properties are studied using techniques including X-ray diffraction, Fourier transform infrared, Raman spectroscopy, nuclear magnetic resonance, differential scanning calorimetry, and thermogravimetric analysis. This review may contribute to the development of using cellulose as a low-cost raw material with anticipated physicochemical properties.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2021

The importance of nutrients for microbial priming in a bog rhizosphere

Wetlands host anaerobic microbes which convert organic carbon into methane (CH 4 ), a powerful greenhouse gas. Wetland plants can influence which carbon compounds are available for microbial processing by exuding freshly fixed carbon from their roots. Notably, exudation of carbon from plant roots can trigger microbial priming: the process of new carbon stimulating the microbial community into processing more soil carbon than they otherwise would have. This study utilized high resolution Fourier transform ion cyclotron mass spectrometry (FT-ICR-MS) analysis to probe the chemical composition of soil organic compounds from the rhizosphere of Carex aquatillis, a common wetland sedge, which is known to have stimulated microbial priming within a peat soil. The goal was to identify what types of molecules are created or lost during microbial priming in the wetland rhizosphere and thus advance mechanistic understanding of the process. FT-ICR-MS analysis demonstrated that more microbial transformations of carbon occurred among water-soluble compounds than among hydrophobic compounds, but that some hydrophobic compounds were processed as well. Crucially for understanding microbial priming, the root exudates triggered increased processing of high molecular weight molecules regardless of nutrient content but processed low molecular weight compounds only if they contained essential nutrients. Furthermore, the pattern of which molecules are processed and which are not is evidence for a selective priming effect in which some types of carbon compounds are used at an increased rate, while others are not.

59 BASIC BIOLOGICAL SCIENCES↗
NASA NTRS1973

Automated thematic mapping and change detection of ERTS-1 images, part A

The author has identified the following significant results. Automatic and accurate image processing techniques are essential to full utilization of ERTS-1 photography. In pursuit of this, terrain types in the ERTS-1 photography will be classified by spatial signatures. Diffraction patterns from selected ERTS-1 images have been developed optically and are being analyzed to identify unique signatures for various terrain types. Spatial signatures have been definitely identified for cultivated land and certain urban areas. A Fourier plane mask has been developed that greatly facilitates the analysis of the diffraction patterns.

Gramenopoulos, N.↗
NASA NTRS1973

Theoretical analysis of impact in composite plates

The calculated stresses and displacements induced anisotropic plates by short duration impact forces are presented. The theoretical model attempts to model the response of fiber composite turbine fan blades to impact by foreign objects such as stones and hailstones. In this model the determination of the impact force uses the Hertz impact theory. The plate response treats the laminated blade as an equivalent anisotropic material using a form of Mindlin's theory for crystal plates. The analysis makes use of a computational tool called the fast Fourier transform. Results are presented in the form of stress contour plots in the plane of the plate for various times after impact. Examination of the maximum stresses due to impact versus ply layup angle reveals that the + or - 15 deg layup angle gives lower flexural stresses than 0 deg, + or - 30 deg and + or - 45 deg. cases.

Moon, F. C.↗
NASA NTRS1977

High-resolution electron microscope

Employing scanning transmission electron microscope as interferometer, relative phases of diffraction maximums can be determined by analysis of dark field images. Synthetic aperture technique and Fourier-transform computer processing of amplitude and phase information provide high resolution images at approximately one angstrom.

Nathan, R.↗
NASA NTRS1976

Steady incompressible variable thickness shear layer aerodynamics

A shear flow aerodynamic theory for steady incompressible flows is presented for both the lifting and non lifting problems. The slow variation of the boundary layer thickness is considered. The slowly varying behavior is treated by using multitime scales. The analysis begins with the elementary wavy wall problem and, through Fourier superpositions over the wave number space, the shear flow equivalents to the aerodynamic transfer functions of classical potential flow are obtained. The aerodynamic transfer functions provide integral equations which relate the wall pressure and the upwash. Computational results are presented for the pressure distribution, the lift coefficient, and the center of pressure travel along a two dimensional flat plate in a shear flow. The aerodynamic load is decreased by the shear layer, compared to the potential flow. The variable thickness shear layer decreases it less than the uniform thickness shear layer based upon equal maximum shear layer thicknesses.

Chi, M. R.↗
NASA NTRS1980

Verification of interim simulated atmospheric turbulence

During horizontal and near-horizontal flight of the space shuttle orbiter, the effects of atmospheric turbulence on the vehicle are crucial in establishing the space shuttle design, control, and human pilot effects. The effects of both turbulent gusts and gust gradients (shears) must be taken into account. By means of a nonrecursive turbulence simulation model, twelve simulated turbulence time series for gusts and gust gradients were generated as part of a previous investigation. The current investigation was concerned with the spectral analysis of the time series based on the use of Fourier transform theory. A comparison between the computed spectra and the corresponding von Karman theoretical spectra is also included. A basic difference is explained between the computed and theoretical spectra which was identified as a result of the comparison. Conclusions and recommendations are presented.

Tatom, F. B.↗