SEARCH · Engineering Papers

Results for “quantitative structure”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 811 records · Page 45

All sources NASA NTRS DOE OSTI

NASA NTRS1979

Soft X-ray structure of the Coma cluster of galaxies

Results are reported for an observation of the Coma cluster with an imaging X-ray telescope system aboard a sounding rocket. A two-dimensional X-ray map of the cluster in the energy range from 0.15 to 2.0 keV is presented. The radial distribution, granularity, and ellipticity of the X-ray surface brightness are investigated, and the spectrum and flux within the field of view are analyzed. These properties are then examined quantitatively by comparing the observations with models through the use of a chi-squared test. It is found that: (1) no single galaxy contributes more than a few percent of the total X-ray flux of the Coma cluster; (2) the X-ray source is diffuse but granular on a scale of several arcmin, particularly in the central region; (3) the centroid of the X-ray source is at a local intensity minimum; and (4) the data are most consistent with an isothermal hydrostatic model.

Gorentstein, P.↗

NASA NTRS1976

Comparison of the crater morphology-size relationship for Mars, moon, and Mercury

Morphology-size data are examined for Martian, Mercurian, and lunar craters. It is shown that both Martian and Mercurian craters exhibit central peaks at lower diameters than those on the moon and that gravity has affected the diameter at which central peaks form on Mars. A quantitative analysis of Martian crater statistics demonstrates that a complete range of crater shapes from small bowl craters to larger and more complex terraced craters occurs on Mars. The complexity of the shapes is found to increase as the sizes of craters increase. It is concluded that aeolian erosion on Mars does not completely mask differences in crater interior structure caused by differences in the gravitational forces on Mars and the moon.

Smith, E. I.↗

NASA NTRS1988

Recent advances in electronic structure theory and their influence on the accuracy of ab initio potential energy surfaces

Recent advances in electronic structure theory and the availability of high speed vector processors have substantially increased the accuracy of ab initio potential energy surfaces. The recently developed atomic natural orbital approach for basis set contraction has reduced both the basis set incompleteness and superposition errors in molecular calculations. Furthermore, full CI calculations can often be used to calibrate a CASSCF/MRCI approach that quantitatively accounts for the valence correlation energy. These computational advances also provide a vehicle for systematically improving the calculations and for estimating the residual error in the calculations. Calculations on selected diatomic and triatomic systems will be used to illustrate the accuracy that currently can be achieved for molecular systems. In particular, the F+H2 yields HF+H potential energy hypersurface is used to illustrate the impact of these computational advances on the calculation of potential energy surfaces.

Bauschlicher, Charles W., Jr.↗

NASA NTRS1989

Recent advances in electronic structure theory and their influence on the accuracy of ab initio potential energy surfaces

Recent advances in electronic structure theory and the availability of high speed vector processors have substantially increased the accuracy of ab initio potential energy surfaces. The recently developed atomic natural orbital approach for basis set contraction has reduced both the basis set incompleteness and superposition errors in molecular calculations. Furthermore, full CI calculations can often be used to calibrate a CASSCF/MRCI approach that quantitatively accounts for the valence correlation energy. These computational advances also provide a vehicle for systematically improving the calculations and for estimating the residual error in the calculations. Calculations on selected diatomic and triatomic systems will be used to illustrate the accuracy that currently can be achieved for molecular systems. In particular, the F + H2 yields HF + H potential energy hypersurface is used to illustrate the impact of these computational advances on the calculation of potential energy surfaces.

Bauschlicher, Charles W., Jr.↗

NASA NTRS1992

Compressibility effects on dynamic stall of airfoils undergoing rapid transient pitching motion

The research was carried out in the Compressible Dynamic Stall Facility, CDSF, at the Fluid Mechanics Laboratory (FML) of NASA Ames Research Center. The facility can produce realistic nondimensional pitch rates experienced by fighter aircraft, which on model scale could be as high as 3600/sec. Nonintrusive optical techniques were used for the measurements. The highlight of the effort was the development of a new real time interferometry method known as Point Diffraction Interferometry - PDI, for use in unsteady separated flows. This can yield instantaneous flow density information (and hence pressure distributions in isentropic flows) over the airfoil. A key finding is that the dynamic stall vortex forms just as the airfoil leading edge separation bubble opens-up. A major result is the observation and quantification of multiple shocks over the airfoil near the leading edge. A quantitative analysis of the PDI images shows that pitching airfoils produce larger suction peaks than steady airfoils at the same Mach number prior to stall. The peak suction level reached just before stall develops is the same at all unsteady rates and decreases with increase in Mach number. The suction is lost once the dynamic stall vortex or vortical structure begins to convect. Based on the knowledge gained from this preliminary analysis of the data, efforts to control dynamic stall were initiated. The focus of this work was to arrive at a dynamically changing leading edge shape that produces only 'acceptable' airfoil pressure distributions over a large angle of attack range.

Chandrasekhara, M. S.↗

NASA NTRS2013

Interactive Ozone and Methane Chemistry in GISS-E2 Historical and Future Climate Simulations

The new generation GISS climate model includes fully interactive chemistry related to ozone in historical and future simulations, and interactive methane in future simulations. Evaluation of ozone, its tropospheric precursors, and methane shows that the model captures much of the largescale spatial structure seen in recent observations. While the model is much improved compared with the previous chemistry-climate model, especially for ozone seasonality in the stratosphere, there is still slightly too rapid stratospheric circulation, too little stratosphere-to-troposphere ozone flux in the Southern Hemisphere and an Antarctic ozone hole that is too large and persists too long. Quantitative metrics of spatial and temporal correlations with satellite datasets as well as spatial autocorrelation to examine transport and mixing are presented to document improvements in model skill and provide a benchmark for future evaluations. The difference in radiative forcing (RF) calculated using modeled tropospheric ozone versus tropospheric ozone observed by TES is only 0.016W/sq. m. Historical 20th Century simulations show a steady increase in whole atmosphere ozone RF through 1970 after which there is a decrease through 2000 due to stratospheric ozone depletion. Ozone forcing increases throughout the 21st century under RCP8.5 owing to a projected recovery of stratospheric ozone depletion and increases in methane, but decreases under RCP4.5 and 2.6 due to reductions in emissions of other ozone precursors. RF from methane is 0.05 to 0.18W/ sq. m higher in our model calculations than in the RCP RF estimates. The surface temperature response to ozone through 1970 follows the increase in forcing due to tropospheric ozone. After that time, surface temperatures decrease as ozone RF declines due to stratospheric depletion. The stratospheric ozone depletion also induces substantial changes in surface winds and the Southern Ocean circulation, which may play a role in a slightly stronger response per unit forcing during later decades. Tropical precipitation shifts south during boreal summer from 1850 to 1970, but then shifts northward from 1970 to 2000, following upper tropospheric temperature gradients more strongly than those at the surface.

Ozone↗

NASA NTRS1972

Structural design criteria applicable to a space shuttle

The structural criteria are limited to general and mission-oriented criteria and are not configuration specific. Care was taken to ensure that the criteria will not restrict configuration development and will not establish the overall risk level. In some instances, margins of confidence are indicated, not only because experience shows them to be necessary but also because technology now permits quantitative values to be established.

Source record↗

NASA NTRS1978

VLBI observations of 3C 345 and NRAO 512 in right and left circular polarization

In October 1975, the radio telescopes of the Haystack, National Radio Astronomy, and Owens Valley Radio Observatories were used as an interferometer to monitor, at 8 GHz, the right and left circularly polarized radiation emitted by the quasars 3C 345 and NRAO 512. The data for each polarization are used separately to estimate several parameters describing a model of the fine structure of the radio brightness of 3C 345 and, subsequently, the angular separation between 3C 345 and NRAO 512. The results for the two polarizations are in approximate agreement, indicating that to the limit of resolution about 0.5 milliarcsec), the fourth Stokes parameter, V, is not significantly different from zero within the compact components of these radio sources. The corresponding quantitative limits on the degree of circular polarization are 0.08 + or - 0.07 for 3C 345 and 0.01 + or - 0.08 for NRAO 512.

Menyuk, C. R.↗

NASA NTRS1981

Image motion compensation on the Spacelab 2 Solar Optical Universal Polarimeter /SL2 SOUP/

The SOUP experiment on Spacelab 2 includes a 30 cm visible light telescope and focal plane package mounted on the Instrument Pointing System (IPS). Scientific goals of the experiment dictate pointing stability requirements of less than 0.05 arcsecond jitter over periods of 5-20 seconds. Quantitative derivations of these requirements from two different aspects are presented: (1) avoidance of motion blurring of diffraction-limited images; (2) precise coalignment of consecutive frames to allow measurement of small image differences. To achieve this stability, a fine guider system capable of removing residual jitter of the IPS and image motions generated on the IPS cruciform instrument support structure has been constructed. This system uses solar limb detectors in the prime focal plane to derive an error signal. Image motion due to pointing errors is compensated by the agile secondary mirror mounted on piezoelectric transducers, controlled by a closed-loop servo system.

Tarbell, T. D.↗

NASA NTRS1985

Extensional tectonics on continents and the transport of heat and matter

Intracontinental zones of extensional tectonic style are commonly of finite width and length. Associated sedimentary troughs are fault-controlled. The evolution of those structures is accompanied by volcanic activity of variable intensity. The characteristic surface structures are usually underlaid by a lower crust of the transitional type while deeper subcustal areas show delayed travel times of seismic waves especially at young tectonic provinces. A correspondence between deep-seated processes and zones of continental extension appears obvious. A sequential order of mechanisms and their importance are discussed in the light of modern data compilations and quantitative kinematic and dynamic approaches. The Cenozoic exensional tectonics related with the Rhine River are discussed.

Neugebauer, H. J.↗

NASA NTRS1989

Optimization of rotor blades for combined structural, performance, and aeroelastic characteristics

The strategies whereby helicopter rotor blades can be optimized for combined structural, inertial, dynamic, aeroelastic, and aerodynamic performance characteristics are outlined. There are three key ingredients in the successful execution of such an interdisciplinary optimization. The first is the definition of a satisfactory performance index that combines all aspects of the problem without too many constraints. The second element is the judicious choice of computationally efficient analysis tools for the various quantitative components in both the cost functional and constraints. The third element is an effective strategy for combining the various disciplines either in parallel or sequential optimizations.

Peters, David A.↗

NASA NTRS1992

Phase transformations in SrAl2Si2O8 glass

Bulk glass of SrAl2Si2O8 composition crystallized at temperatures below 1000 C into hexacelsian, a hexagonal phase which undergoes a reversible, rapid transformation to an orthorhombic phase at 758 C, and at higher temperatures crystallized as celsian, a monoclinic phase. The glass transition temperature and crystallization onset temperature were determined to be 883 C and 1086 C, respectively, from DSC at a heating rate of 20 C/min. Thermal expansion of the various phases and density and bend strengths of cold isostatically pressed glass powder bars, sintered at various temperatures, were measured. The kinetics of the hexacelsian-to-celsian transformation for SrAl2Si2O8 were studied. Hexacelsian flakes were isothermally heat treated at temperatures from 1025-1200 C for various times. Avrami plots were determined by quantitatively measuring the amount of monoclinic celsian formed at various times using x ray diffraction. The Avrami constant was determined to be 1.1, suggesting a diffusionless, one dimensional transformation mechanism. The activation energy was determined from an Arrhenius plot of 1n k vs. 1/T to be 125 kilocal/mole. This value is consistent with a mechanism which transforms the layered hexacelsian structure to a three dimensional framework celsian structure and involves the breaking of Si-O bonds.

Drummond, Charles H., III↗

NASA NTRS1954

Structural response to discrete and continuous gusts of an airplane having wing bending flexibility and a correlation of calculated and flight results

An analysis is made of the structural response to gusts of an airplane having the degrees of freedom of vertical motion and wing bending flexibility and basic parameters are established. A convenient and accurate numerical solution of the response equations is developed for the case of discrete-gust encounter, an exact solution is made for the simpler case of continuous-sinusoidal-gust encounter, and the procedure is outlined for treating the more realistic condition of continuous random atmospheric turbulence, based on the methods of generalized harmonic analysis. Correlation studies between flight and calculated results are then given to evaluate the influence of wing bending flexibility on the structural response to gusts of two twin-engine transports and one four-engine bomber. It is shown that calculated results obtained by means of a discrete-gust approach reveal the general nature of the flexibility effects and lead to qualitative correlation with flight results. In contrast, calculations by means of the continuous-turbulence approach show good quantitative correlation with flight results and indicate a much greater degree of resolution of the flexibility effects.

Houbolt, John C↗

NASA NTRS1994

Diagnostics of dust content in spiral galaxies: Numerical simulations of radiative transfer

In order to find the best observable diagnostics for the amount of internal extinction within spiral galaxies, we have constructed realistic models for disk galaxies with immersed dust layers. The radiative transfer including both scattering and absorption has been computed for a range of model galaxies in various orientations. Standard galaxy surface photometry techniques were then applied to the numerical data to illustrate how different observables such as total magnitude, color and luminosity distribution behave under given conditions of dust distribution. This work reveals a set of superior diagnostics for the dust in the disk. These include not only the integrated parameters, but also the apparent disk structural parameters, the amplitude of the asymmetry between the near and far sides of the galaxy as divided by the apparent major axis and their dependence on the orientation of the galaxy with respect to the observer. Combining the above diagnostics with our impressions of real galaxies, we arrive at the qualitative conclusion that galaxy disks are generally optically thin. Quantitative conclusions will appear in subsequent work.

Byun, Y. I.↗

NASA NTRS2026

Thermal Inspection for the Assessment of Adhesively Bonded Metal Adherends

Certification of adhesively bonded structures is currently a challenge for aircraft manufacturers. The ability to certify bonds in primary structure can reduce dependence on fasteners and this will enable more efficient manufacturing. For example, drilling holes and installing fasteners in bonded joints can be a potentially significant bottleneck in airframe manufacturing. In addition, fasteners increase the airframe weight and can add stress concentration areas. Reducing fastener count can accelerate manufacturing and improve aircraft performance. NASA is currently investigating nondestructive evaluation (NDE) techniques to assess bond integrity. For example, bond thickness influences bond strength and therefore NDE techniques are being investigated to determine bond thickness. For bonded metal structures, there is a large difference in the thermal diffusivity between the 7075 aluminum alloy metal adherends and aircraft grade adhesive. Multi-layered thermal models show a large variation in the thermal response for bondline adhesive thicknesses that vary from 100 to 300 microns for adherend thicknesses of 0.163 cm. Experimental through-transmission thermal measurements reveal promise to quantitatively characterize the bondline thickness. Results were validated with X-ray computed tomography and optical microscopy measurements, and influence of porosity on the thermal model and measurements are investigated.

X-ray computed tomography↗

NASA NTRS2026

Thermal Inspection for the Assessment of Adhesively Bonded Metal Adherents

bondline thickness↗

NASA NTRS1985

Mapping Structures Characteristic of the Highland Boundary Scarp on Mars

In an effort to shed some light on the processes which have produced the highlands/lowlands boundary scrap on Mars, the global distributions of knobby terrain, detached and separated blocks and mesas, and craters larger than 10 km diameter were mapped. These data were represented as fractional areal percentages of the sample box, which is 2.5 deg high (latitude) along north-south profiles every 5 deg in longitude. The fractional area of crater interiors provides a way of quantitatively characterizing the boundary between cratered highlands and relatively uncratered plains. In the vicinity of the nomimal scarp there is generally good agreement between the dropoff in fractional area of craters and a drop-off in topography. Contoured versions of the fractional area of crater interiors, even at the low resolution imposed by the sample box, show good agreement with the geologic mapping. The most northerly occurrence of detached plateaus and knobby terrain were located in order to test the plausibility of the hypothesis that much of the present day highland boundary scrap is due to southward migration of a former boundary.

Frey, H.↗

NASA NTRS1995

Evaluation of Oxygen Interactions with Materials 3: Mission and induced environments

The Evaluation of Oxygen Interactions with Materials 3 (EOIM-3) flight experiment was developed to obtain benchmark atomic oxygen/material reactivity data. The experiment was conducted during Space Shuttle mission 46 (STS-46), which flew July 31 to August 7, 1992. Quantitative interpretation of the materials reactivity measurements requires a complete and accurate definition of the space environment exposure, including the thermal history of the payload, the solar ultraviolet exposure, the atomic oxygen fluence, and any spacecraft outgassing contamination effects. The thermal history of the payload was measured using twelve thermocouple sensors placed behind selected samples and on the EOIM-3 payload structure. The solar ultraviolet exposure history of the EOIM-3 payload was determined by analysis of the as-flown orbit and vehicle attitude combined with daily average solar ultraviolet and vacuum ultraviolet (UV/VUV) fluxes. The atomic oxygen fluence was assessed in three different ways. First, the O-atom fluence was calculated using a program that incorporates the MSIS-86 atmospheric model, the as-flown Space Shuttle trajectory, and solar activity parameters. Second, the oxygen atom fluence was estimated directly from Kapton film erosion. Third, ambient oxygen atom measurements were made using the quadrupole mass spectrometer on the EOIM-3 payload. Our best estimate of the oxygen atom fluence as of this writing is 2.3 +/- 0.3 x 10(exp 20) atoms/sq cm. Finally, results of post-flight X-ray photoelectron spectroscopy (XPS) surface analyses of selected samples indicate low levels of contamination on the payload surface.

Koontz, Steven L.↗