Role of graphite crystal structure on the shock-induced formation of cubic and hexagonal diamond
Abstract not provided
Volz, Travis J. (ORCID:0000000182249368)↗
SEARCH · Engineering Papers
Results for “data reporting formats”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Chromatographic Modeling of 1-Foot Detritiation Test Column Results for the Optimization of Regeneration Time
This report documents the methods and results of a modeling study on a series of data generated by 1-foot test columns for the Water Detritiation project. In order to compliment modeling work already in progress on this project, a purely empirical curve-fitting approach is used in this study to determine chromatographic performance indicators such as retention time, curve width, and the number of chromatographic stages. The data used in this study comes from four sets of chromatographic test separations performed in March through May of 2017 using 1-foot columns. All are using the same flow rates and temperature (room temperature, nominally 25 C°). The first set of data (referred to in this report as the Column 1 data) is a series of twelve breakthrough curve measurements. Prior to each of these twelve runs, the column was regenerated by flowing hydrogen gas through the column, for increasing amounts of time, ranging from 2 hours to 25 hours. The second set of data (referred to as the Column 2 data) is comprised of five measurements of breakthrough curves measured in similar fashion as the Column 1 data, across a range of regeneration times from 2 to 21 hours. The third set of data (referred to as the Purge data) is of three breakthrough curves, measured after a regeneration time of 8 hours, which takes place after a nitrogen purge of 15, 30, or 45 minutes. The fourth data set is a series of five breakthrough curve measurements using a 2 nd batch of stationary phase, taken after regeneration times ranging from 2 to 20 hours. The overall modeling approach is as follows. First, the data is pre-processed for formatting, artifact removal, and is normalized. The data is then fit by integrated versions of four common chromatographic models. The best model is chosen based on the predictive performance of the model, and chromatographic performance values are calculated based on the best model’s fit parameters. Each of these processes are detailed below.
42 ENGINEERING↗
Hot Droughts and Forest Tree Dynamics in the Amazon - Statistical Models, Scripts, Data, and Outputs
This package contains data, outputs, equations, and R scripts for analyses for manuscript entitled "Hot droughts in the Amazon: A window to a future hypertropical climate" by J. Chambers et al., in particular it contains statistical models and analyses for the INPA BIONTE tree mortality study. The Models folder contains details for all statistical models in PDF files. The Scripts folder contains the R scripts for Bayesian Hierarchical Models (two text files) and SEMs (one text file) are separate and reasonably annotated. All data associated with these scripts are in the data folder. The Data folder contains two of the three CSV files used for the analyses and are called by the R scripts. Two of them are part of published datasets (`BIONTE_mortality-rates.csv` from Lima et al. 2024, DOI:10.15486/ngt/1898910 and `SPEI.csv` from Pastorello et al. 2023 DOI:10.15486/ngt/1958257) and also provided in this package for convenience (please see the corresponding datasets for usage and citation terms). The third dataset (`BIONTE_gapfilled_wd.csv`) contains sensitive information and can be obtained by contacting the manuscript lead author. The Outputs folder contains the two output files that provide extra information about the analyses. The file `figuresFeb2025d.pdf` contains all the figures from the manuscript - captions are in the manuscript. The file `ChambersMS.pdf` contains primary results from Bayesian statistical models, regression analyses, and validation steps applied to the tree mortality data from the INPA experiments. The document includes visual summaries, model diagnostics, and leave-one-out (LOO) validation results. A breakdown of file contents can be found in the README file that is part of this package.
54 ENVIRONMENTAL SCIENCES↗
Metagenome-assembled genomes from soil samples in control and warming plots in Blodgett Forest, CA (2014-2021)
The pathways of carbon transport and loss through and from soils—soil organic matter (SOM) depolymerization to dissolved organic carbon and mineralization to carbon dioxide (CO2)—are fundamentally driven by microbial activity, which is strongly regulated by environmental conditions. As part of LBNL (Lawrence Berkeley National Laboratory) TES (Terrestrial Ecosystem Science) Belowground Biogeochemistry Science Focus Area (SFA), we have established a novel whole-soil long-term warming experiment at the University of California (UC) Blodgett Forest Research Station (Sierra Nevada) in 2014, where we study the role of biogeochemical, microbial and geochemical process interactions in SOM decomposition and stabilization.Here, we present metagenome-assembled genomes (MAGs) for the bacterial and archaeal community from soil depth profiles collected from 2014 to 2021 from three paired control and warming plots. We collected soil samples across a range of depth profiles (spanning surface to 90 cm deep) from three paired control and warming plots from a temperate mixed forest in Northern California. Each paired plot had been subjected to experimental warming since June 2014 to simulate a predicted climate change scenario for northern California. 101 soil metagenomes were sequenced at JGI (Joint Genome Institute) and UCSF (University of California San Francisco) Center for Advanced Technology and can be found under the JGI (Joint Genome Institute) GOLD (Genomes Online Database) Sequencing project Gs0151586 and NCBI (National Center for Biotechnology Information) Projects PRJNA1225762 and PRJEB39497. Metagenomes were assembled using JGI (Joint Genome Institute) Metagenome Workflow (10.1128/mSystems.00804-20). For each metagenome, the assembled contigs were binned into genomes using 3 binning algorithms (cocacola, metabat, and maxbin) and the resulting bins were consolidated using dastool. The consolidated bins from all metagenomes were pooled, filtered by completeness (>50%) and contamination (<25%), and dereplicated at 99% ANI (average nucleotide identity) using dRep (https://github.com/MrOlm/drep).The dataset includes a zip file of 2321 MAG (Metagenome Assembled Genome) fasta files, the accession numbers for the underlying metagenomes, and a csv file with MAG (Metagenome Assembled Genome) quality metrics and taxonomic classification (GTDB -Genome Taxonomy Database-RS220). This dataset also includes a file-level metadata (flmd.csv) file that lists each file contained in the dataset with associated metadata and a data dictionary (dd.csv) file that contains column/row headers used throughout the files along with a definition, units, and data type. A sample metadata file (samples.csv) that contains site information has also been included.
54 ENVIRONMENTAL SCIENCES↗
Implications of Aerosol Physicochemical Properties Including Ice Nucleation at ARM Mega Sites for Improved Understanding of Microphysical Atmospheric Cloud Processes (Final Technical Report)
Continuous, long-term measurements of atmospheric ice-nucleating particles (INPs) that influence clouds and precipitation were conducted to investigate the abundance and variability of ground-level INPs across the world. Three field campaigns were organized by the DOE Atmospheric Radiation Measurement (ARM) program, including Examining INP from Southern Great Plains (ExINP-SGP, 2019), Examining INP from Eastern North Atlantic (ExINP-ENA, 2020 – 2021), and Examining INP from North Slope of Alaska (ExINP-NSA, 2021 – 2024). Additional small-scale supporting field experiments were performed in 2019 and 2021 to collect airborne particulate matter at SGP for complementary laboratory characterization of the particles’ physical and chemical properties [Aerosol-Ice Formation Closure Pilot Study (AEROICESTUDY), 2019; ExINP-SGP II, 2021]. In these studies, the PI’s team measured INP concentration with both real-time and laboratory measurements in a wide range of freezing temperatures ($T$ from 0 °C to about –30 °C). This project elucidated spatial variability and seasonality in the abundance of immersion mode active INPs across three ARM sites using a single instrument, a Portable Ice Nucleation Experiment (PINE) chamber version 03 (PINE-03 hereafter). Collocated aerosol and meteorological data were analyzed to assess the correlation between ambient INP abundance, air mass origin region, and meteorological variability. Our findings suggest very high freezing efficiency of INPs at the NSA site across the measured temperatures (ice nucleation active surface site density, $n_s(T)$, $\approx 2 \times 10^{8} - 10^{10}$ m -2 for from –16 to –31 °C), which is a factor of 10 – 1000 times greater efficiency as compared to that found in the previous mid-latitude INP measurements in autumn using the same instrument; surprisingly high INP abundance ($\ge 1 \text{ L}^{-1}$ at –25 °C) for the examined temperatures throughout the year that PINE-03 did not measure at other sites; and high INP concentration in spring, possibly related to arctic haze episodes.
58 GEOSCIENCES↗
Integrating Very-High-Resolution UAS Data and Airborne Imaging Spectroscopy to Map the Fractional Composition of Arctic Plant Functional Types in Western Alaska: Supporting Data
Remote sensing maps of plant functional type (PFT) fractional cover (FCover), dominant PFT, and FCover uncertainty derived from NASA's Airborne Visible / Infrared Imaging Spectrometer - Next Generation (AVIRIS-NG). The AVIRIS-NG imaging spectroscopy data (380-2510 nm) was collected as a part of the collaboration between NASA's Arctic-Boreal Vulnerability Experiment (ABoVE; Miller et al., 2019) and DOE's Next Generation Ecosystem Experiment in the Arctic (NGEE-Arctic). This package includes maps of the NGEE-Arctic Council watershed on the Seward Peninsula, Alaska, created using AVIRIS-NG imagery collected on July 9th, 2019. The map data and metadata are provided as GeoTIFF (*.tif), ENVI image (*.dat), and text (*.txt, *hdr) formats. Additional map quicklooks are provided as *.pdf files and GIS *.kml files. These datasets are provided in support of Yang et al., (2023), "Integrating Very-High-Resolution UAS Data and Airborne Imaging Spectroscopy to Map the Fractional Composition of Arctic Plant Functional Types in Western Alaska".The Next-Generation Ecosystem Experiments: Arctic (NGEE Arctic), was a research effort to reduce uncertainty in Earth System Models by developing a predictive understanding of carbon-rich Arctic ecosystems and feedbacks to climate. NGEE Arctic was supported by the Department of Energy's Office of Biological and Environmental Research.The NGEE Arctic project had two field research sites: 1) located within the Arctic polygonal tundra coastal region on the Barrow Environmental Observatory (BEO) and the North Slope near Utqiagvik (Barrow), Alaska and 2) multiple areas on the discontinuous permafrost region of the Seward Peninsula north of Nome, Alaska.Through observations, experiments, and synthesis with existing datasets, NGEE Arctic provided an enhanced knowledge base for multi-scale modeling and contributed to improved process representation at global pan-Arctic scales within the Department of Energy's Earth system Model (the Energy Exascale Earth System Model, or E3SM), and specifically within the E3SM Land Model component (ELM).
54 ENVIRONMENTAL SCIENCES↗
WHONDRS Surface Water and Sediment Geochemistry and Organic Matter Characterization Data from Streams across HJ Andrews Experimental Forest, Oregon (v2)
This dataset supports a broader study developing conceptual models for river corridor critical zone processes across spatial scales and was generated in collaboration with the HJ Andrews River Corridor Critical Zone Workshop in 2025. The dataset provides surface water geochemistry (dissolved organic carbon, total dissolved nitrogen) from 48 sites across the HJ Andrews Experimental Forest, Oregon (https://andrewsforest.oregonstate.edu). Some of the sites have been impacted by the Holiday Farm Fire and the Lookout Fire in 2020 and 2023, respectively. Related data were collected as part of the workshop and will be published separately in collaboration with other workshop attendees and available at http://www.hydroshare.org/resource/b274c4a234bf4b12b7cb8a54a696c629. Related genomic data can be found on the National Center for Biotechnology Information (NCBI) under BioProject PRJNA1503030 (see critical details section below for more information). Additional related data collected in 2016 from a similar effort can be found at https://data.ess-dive.lbl.gov/datasets/doi:10.15485/3377027 and http://www.hydroshare.org/resource/ea6c0832885a46c3939e7bb22e48e754 and are described within https://doi.org/10.5194/essd-11-1-2019 (Ward et al., 2019). This data package was originally published in March 2026. It was updated in August 2026 (v2; new and modified files). See the change history section in the readme for more details. For details on how to navigate data packages generated by this project, see https://data.ess-dive.lbl.gov/portals/PNNLRiverCorridorSFA/About. In addition to a readme, this data package also includes a file-level metadata (FLMD) file that describes each file and a data dictionary (DD) that describes all column/row headers and variable definitions. This dataset is comprised of (1) a folder of field photos, (2) a folder of raw Fourier transform ion cyclotron resonance mass spectrometry (FTICR-MS) data, (3) a data checks report, (4) a folder of sample data, (5) file-level metadata, (6) data dictionary, (7) field metadata, (8) readme, (9) international generic sample number (IGSN) mapping file; and (10) field protocol. The sample data subfolder contains surface water and sediment (1) dissolved organic carbon (DOC, measured as non-purgeable organic carbon, NPOC) data and averages, (2) total dissolved nitrogen data and averages, (3) methods codes, (4) FTICR-MS methods; and (5) a subfolder of 9.4 Tesla (9.4T) FTICR-MS data. This folder contains the CoreMS processed data and seven subfolders, thee containing .xml files for each sample type (sediment, surface water and blank samples), three containing the sediment CoreMS output files for each sample type (sediment, surface water and blank samples), and the other containing instructions and scripts for processing the files in CoreMS (https://github.com/EMSL-Computing/CoreMS). All files are .csv, .pdf, .R, .xml, .Rmd, .py, .cal, .json, .jpg, or .jpeg.
Biogeochemistry↗
Carbon flux measurements from chambers collected between July to October 2022 at Old Woman Creek, Huron, Ohio.
This dataset contains carbon dioxide and methane flux measurements collected via chamber sampling at Old Woman Creek National Estuarine Research Reserve in Huron, OH. These data were generated to understand temporal and vegetation patterns associated with wetland carbon cycling. Specifically, this dataset intends to answer how carbon dioxide and methane fluxes change monthly and hourly across sites with vegetation and without vegetation. Data includes chamber measurements that were measured in both sites with vegetation and without vegetation and that were collected hourly, for 12 hours, and monthly, for four months. The file soilrespiration_data.csv contains these data, and the metadata file (soilrespiration_chammetadata.csv) and location metadata file (soilrespiration_locationmetadata.csv) have information on locations where the chambers were placed and sampled in the wetland. Data processing was done on raw methane fluxes (Flux_CH4) to remove the influence of ebullition (Flux_CH4_ebullition) to get a diffusive flux (Flux_CH4_diffusive).
54 ENVIRONMENTAL SCIENCES↗
Temperature, Humidity, and Time-Lapse Video Data from Yosemite National Park, Water Year 2024
This dataset contains time-lapse imagery and distributed measurements of air temperature, relative humidity, dew point, and soil temperature across Yosemite National Park from October 2023 to September 2024. Instruments were deployed at 10 sites in two cross-valley transects as part of the DOE Grant: Seasonal Cycles Unravel Mysteries of Missing Mountain Water organized by Jessica Lundquist (University of Washington), Rosemary Carroll (Desert Research Institute), and Ethan Gutmann (National Center for Atmospheric Research). The data are intended to support hydrologic modeling efforts to better resolve the fate of mountain water, and are published to support studies of surface climate or hydrologic processes in complex terrain. Measurements were collected with low-cost data loggers installed 2 m high on evergreen trees or buried just below the soil surface. A time-lapse camera at one site captures valley-scale seasonal snow cover variability.Dataset files are organized by site and variable (air measurements, ground measurements, or time-lapse video). Air and ground measurements are packaged in LoggerData.zip, and time-lapse imagery is compiled into a short video stored in TimelapseVideos.zip. File-level metadata contains details for each file included in the dataset. A data dictionary provides units and descriptions for column or row names in all files. The locations metadata file describes site characteristics, locations, and associated GPS methods.
54 ENVIRONMENTAL SCIENCES↗
A Self-Synchronizing Underwater Acoustic Network for Mooring Load Monitoring of a Wave Energy Converter
This paper reports on the development of a self-synchronizing underwater acoustic network developed for remote monitoring of mooring loads in Wave Energy Converters (WECs). This network uses Time Division Multiple Access and operates self-contained with the ability for users to remotely transmit commands to the network as needed. Each node is a self-contained unit, consisting of a protocol adaptor board, an FAU-DPAM underwater acoustic modem and a battery pack. A node can be connected to a load cell, to a topside user or to the WEC. Every node is swapable. The protocol adaptor board, named Protocol Adaptor for Digital LOad Cell (PADLOC) supports a variety of digital load cell message formats (CAN, MODBUS, custom ASCII) and underwater acoustic modem serial formats. PADLOC enables topside users to connect to separate load cells through a user-specific command. This is especially important if the user is monitoring multiple load cells during deployment or maintenance, when the primary data system may be offline. Each PADLOC board handles formatting, buffering and has a one-on-one serial connection with each pair (node) of a digital load cell and acoustic modem. In addition, each PADLOC board handles the timekeeping and power saving features for each node. The only limitation is the data bit rate and delay limitations associated with the underwater acoustic modem. A four node self-synchronizing network has been developed to demonstrate the load cell monitoring capability using the PADLOC technology on the CalWave WEC.
acoustic↗
Chemical and genetic characterization of the ungrouped pallasite Lieksa
The meteorite Lieksa was found in 2017 in Löpönvaara, Finland, and later donated to the Finnish Museum of Natural History. Here, we report siderophile element concentrations, genetic isotopic data, and a metal–silicate segregation age for the meteorite. The ~280 g Lieksa is ~80% metal and ~20% silicate and oxide inclusions by volume, with the inclusions consisting primarily of Fe-rich olivine. Due to Lieksa's silicate content, coupled with a texture characterized by metal enclosing the silicates, it has been classified as a pallasite. Lieksa's olivine and bulk chemical characteristics are distinct from those of the known pallasite and iron meteorite groups, consistent with its classification as ungrouped. The meteorite exhibits a flat, chondrite-normalized highly siderophile element pattern, consistent with an origin as an early crystallization product from a metallic melt with chondritic relative abundances. Molybdenum, Ru, and 183 W isotopic data indicate that Lieksa formed in the non-carbonaceous (NC) domain of the solar nebula. Radiogenic 182 W abundances for Lieksa yield a model metal–silicate segregation age of 1.5 ± 0.8 Myr after calcium-aluminum-rich inclusion formation, which is within the range established for other NC-type pallasite and iron meteorite parent bodies.
58 GEOSCIENCES↗
Persistent, “Mysterious” Seismoacoustic Signals Reported in Oklahoma State during 2019
Here, we report on the source of seismoacoustic pulses that were observed across the state of Oklahoma (OK) during summer of 2019, and the subject of national media coverage and speculation. Seismic network data collected across four U.S. states and interviews with witnesses to the pulse’s effect on residential structures demonstrate that they were triggered by routine ammunition disposal operations conducted by McAlester Army Ammunition Plant (McAAP). During these operations, conventional explosives destroy obsolete munitions stored in pits through a controlled sequence of electronically timed shots that occur over tens of minutes. Despite noise-abatement efforts that reduce coupling of acoustic energy with air, some lower frequency, subaudible (infrasonic) sound radiates from these shots as discrete pulses. We use nine months of blast log documents, seismic network records, analyst picks, and physical modeling to demonstrate that seismic stations as far as 640 km from McAAP sample these pulses, which record seasonal patterns in stratospheric and tropospheric winds, as well as the dynamic formation of waveguides and shadow zones. Digital short-term average to long-term average detectors that we augment with dynamic thresholds and time-binning operations identify these pulses with a fair probability, when compared with visual observations. Our analyses thereby provide estimates of observation rates for both partial and full sequences of these pulses, as well as single shots. We suggest that disposal operations can exploit existing, composite seismic networks to predict where residents are likely to witness blasting. Crucially, our data also show that dense seismic networks can record multiscale atmospheric processes in the absence of infrasound arrays.
58 GEOSCIENCES↗
The Cypress Sandstone Seal System
The Cypress Sandstone is the youngest and shallowest unit in the Illinois Basin that was featured in the United States Carbon Utilization and Storage Atlas IV as a target for saline carbon storage with an estimated 0.2 to 2.3 GT of storage potential. Additional research on a residual oil zone (ROZ) developed within the Cypress Sandstone has delineated 27 prospects with approximately 290.8 million m3 (1.8 billion barrels) of oil in place. 21 to 31 million m 3 (144 to 196 million barrels) of oil is estimated to be recoverable using carbon dioxide enhanced oil recovery (CO 2 -EOR). Storage of CO 2 associated with EOR in these ROZ prospects alone, not accounting for associated main pay zones (MPZs), underlying brine formation, or intervals adjacent to or between prospects, is estimated to be up to 10.4 billion tonnes. The Cypress Sandstone is thus well understood to be a CO 2 injection target, both for EOR and associated storage. However, the seal system overlying the Cypress Sandstone is poorly understood. Unlike deeper formations such as the Mt. Simon Sandstone or the St. Peter Sandstone which are either in use as a CO 2 sink or being characterized for prospective storage, respectively, the Cypress is not overlain by hundreds of feet of impermeable shale. Rather, the Cypress is overlain by a lithologically variable interval that is composed generally of shales and limestones with some sandstone in the part of the Basin where the Cypress is deep enough to facilitate CO 2 storage. Also, due to its status as one of the shallowest and most prolific oil reservoirs in the Basin, the seal system overlying the Cypress Sandstone has a relatively high number of legacy well penetrations. The purpose of this report is to characterize the Cypress Sandstone seal system using well logs and available core. Gross thickness, lithology (facies), and mineralogy of seals is described and mapped across the Basin. The column height of CO 2 that can be held is calculated using capillary pressure data from a representative core.
02 PETROLEUM↗
The AGORA High-resolution Galaxy Simulations Comparison Project. IV. Halo and Galaxy Mass Assembly in a Cosmological Zoom-in Simulation at z ≤ 2
In this fourth paper from the AGORA Collaboration, we study the evolution down to redshift z = 2 and below of a set of cosmological zoom-in simulations of a Milky Way mass galaxy by eight of the leading hydrodynamic simulation codes. We also compare this CosmoRun suite of simulations with dark matter-only simulations by the same eight codes. We analyze general properties of the halo and galaxy at z = 4 and 3, and before the last major merger, focusing on the formation of well-defined rotationally supported disks, the mass–metallicity relation, the specific star formation rate, the gas metallicity gradients, and the nonaxisymmetric structures in the stellar disks. Codes generally converge well to the stellar-to-halo mass ratios predicted by semianalytic models at z ~ 2. We see that almost all the hydro codes develop rotationally supported structures at low redshifts. Most agree within 0.5 dex with the observed mass–metallicity relation at high and intermediate redshifts, and reproduce the gas metallicity gradients obtained from analytical models and low-redshift observations. We confirm that the intercode differences in the halo assembly history reported in the first paper of the collaboration also exist in CosmoRun, making the code-to-code comparison more difficult. We show that such differences are mainly due to variations in code-dependent parameters that control the time stepping strategy of the gravity solver. We find that variations in the early stellar feedback can also result in differences in the timing of the low-redshift mergers. All the simulation data down to z = 2 and the auxiliary data will be made publicly available.
79 ASTRONOMY AND ASTROPHYSICS↗
Data and scripts associated with: “Burn severity and vegetation type control phosphorus concentration, molecular composition, and mobilization”
This data package is associated with the publication “Burn severity and vegetation type control phosphorus concentration, molecular composition, and mobilization” published in European Geophysical Union - Biogeosciences (Barnes et al. 2025). This study investigates how phosphorus (P) biogeochemistry is altered by burn severity in contrasting types of vegetation chars. This data package documents the workflow used to process and generate the main figures and statistics in the manuscript. The R scripts reference minimally processed P nuclear magnetic resonance (P-NMR) and X-ray absorption near edge structure (P-XANES) data, as well as fully processed data including total elemental composition of the solid chars, total elemental composition of the char leachates (particulate and aqueous phases), and leachate aqueous phase molybdate reactive P concentration. These source data and associated metadata can be found on ESS-DIVE at https://data.ess-dive.lbl.gov/datasets/doi:10.15485/1894135 (Grieger et al. 2022; v3). Files and scripts included in this data package finish the processing workflow for P-NMR and P-XANES data. These data can be used to gain a better understanding of bulk chemical changes in chars and their leachates, as well as detailed molecular changes to P. This data package is associated with the GitHub repository found at https://github.com/river-corridors-sfa/rcsfa-RC3-BSLE_P. This data package is comprised of a “data” folder and a series of data processing and analysis scripts. Details on how to recreate the workflow can be found in the Critical Details section of the readme and the “workflow_readme.md” file. The file-level metadata file (file ending in “flmd.csv”) lists all files contained in this data package and descriptions for each. The data dictionary (file ending in “dd.csv”) describes all tabular data columns and their respective definitions and units.
54 ENVIRONMENTAL SCIENCES↗
Evaluation of Nuclear Spent Fuel Disposal in Clay-Bearing Rock - Process Model Development and Experimental Studies
This report represents the milestone deliverable M2SF-23SN010301072 “Evaluation of Nuclear Spent Fuel Disposal in Clay-Bearing Rock - Process Model Development and Experimental Studies” The report provides a status update of FY23 activities for the work package Argillite Disposal work packages for the DOE-NE Spent Fuel Waste Form Science and Technology (SFWST) Program. Clay-rich geological media (often referred as shale or argillite) are among the most abundant type of sedimentary rock near the Earth’s surface. Argillaceous rock formations have the following advantageous attributes for deep geological nuclear waste disposal: widespread geologic occurrence, found in stable geologic settings, low permeability, self-sealing properties, low effective diffusion coefficient, high sorption capacity, and have the appropriate depth and thickness to host nuclear waste repository concepts. The DOE R&D program under the Spent Fuel Waste Science Technology (SFWST) campaign has made key progress (through experiment, modeling, and testing) in the study of chemical and physical phenomena that could impact the long-term safety assessment of heat-generating nuclear waste disposition in clay/shale/argillaceous rock. International collaboration activities comprising field-scale heater tests, field data monitoring, and laboratory-scale experiments provide key information on changes to the engineered barrier system (EBS) material exposed high thermal loads. Moreover, consideration of direct disposal of large capacity dual-purpose canisters (DPCs) as part of the back-end SNF waste disposition strategy has generated interest in improving our understanding of the effects of elevated temperatures on the engineered barrier system (EBS) design concepts. Chemical and structural analyses of sampled bentonite material from laboratory tests at elevated temperatures are key to the characterization of thermal effects affecting bentonite clay barrier performance. The knowledge provided by these experiments is crucial to constrain the extent of sacrificial zones in the EBS design during the thermal period. Thermal, hydrologic, mechanical, and chemical (THMC) data collected from heater tests and laboratory experiments have been used in the development, validation, and calibration of THMC simulators to model near-field coupled processes. This information leads to the development of simulation approaches to assess issues on coupled processes involving porous media flow, transport, geomechanical phenomena, chemical interactions with barrier/geologic materials, and the development of EBS concepts. These lines of knowledge are central to the design of deep geological backfilled repository concepts where temperature plays a key role in the EBS behavior, potential interactions with host rock, and long-term performance in the safety assessment.
11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
Meteoric 10Be Flux Calibration Data for the East River Watershed, Colorado, USA
This data package contains tabular and geospatial data used to quantify and model meteoric beryllium-10 fluxes in the East River watershed, Colorado, USA. The tabular component includes calibration-site data from five glacial moraine sites and includes environmental variables used to evaluate spatial controls on meteoric 10Be delivery, including elevation, mean annual precipitation (MAP), mean snow depth, and mean snow water equivalent (SWE). These site-level data were used to compare observed fluxes with environmental gradients across the watershed and to evaluate the effects of erosion correction on flux estimates. The package also includes supporting slope and curvature values used to assess topographic inputs to the erosion analysis. A second component of the data package contains updated manuscript tables and regression outputs used to summarize the relationships between meteoric 10Be flux and environmental predictors. These tables include meteoric 10Be sample information and AMS results, site-level environmental values, site-level meteoric 10Be inventory and flux values, watershed-averaged predicted fluxes, soil bulk density measurements, fine-fraction values, soil pH measurements, and regression statistics including slope, intercept, coefficient of determination, and p-value. The regression products include both standard linear regressions and regressions in which the intercept is constrained to pass through zero, and they support the analyses presented in the companion manuscript. Together, these tabular files provide the numerical basis for the manuscript tables and the regression-based interpretation of meteoric 10Be flux variability in a snow-dominated mountain watershed. The geospatial component of the package consists of GeoTIFF raster files used to generate the map products presented in Figures 2 and 6 of the companion manuscript. These rasters represent watershed-scale spatial layers for environmental variables and regression-based predictions of meteoric 10Be flux. This dataset contains comma-separated values files (.csv), Microsoft Excel files (.xlsx), GeoTIFF raster files (.tif), and upporting metadata files, including CSV data dictionaries and readme text files (.csv, .txt). The tabular files can be opened with standard spreadsheet software, and the raster files can be viewed and analyzed in GIS software such as ArcGIS Pro or QGIS. Together, these files document the numerical and spatial datasets used to calibrate and predict meteoric 10Be delivery in the East River watershed.
East River↗
Data from: "Reply to ‘The challenge of defining effectively-no-snow’"
This repository contains the data and code associated with the paper titled "Reply to ‘The challenge of defining effectively-no-snow’" published in Nature Reviews Earth and Environment, 2026. In this reply, we argue that the 10th percentile of peak SWE (Snow Water Equivalent), which we propose in the original article, can be used as intended given it's a standardized, impact-based benchmark for comparing snow conditions across regions, not as a literal measure of snow absence. We present new evidence with SNOwpack TELemetry (SNOTEL) data showing that years meeting the threshold are overwhelmingly associated with subsequent drought (given United States Drought Monitor conditions), supporting its hydrologic and societal relevance. We conclude that while the distinction between "effectively no snow" and "zero snow" should be clearly communicated, the original definition remains appropriate for assessing impacts on snow-dependent water systems. The file code_nree_ML_reply_2026.Rmd contains the main processing scripts which analyze the SNOTEL data. Data from the US Drought Monitor was downloaded at: https://usdmdataservices using the Get Drought Severity Statistics By Area Percent' option, saved to the *_HUC4_delineated.csv files (Hydrologic Unit Code), which are labeled accordingly. This work was supported by the Watershed Function Science Focus Area at Lawrence Berkeley National Laboratory funded by the US Department of Energy, Office of Science, Biological and Environmental Research under Contract No. DE-AC02-05CH11231.
EARTH SCIENCE > TERRESTRIAL HYDROSPHERE > SNOW/ICE↗