Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “input data”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 793 records · Page 44
All sourcesNASA NTRSDOE OSTI
NASA NTRS1981

Modelling of polymer photodegradation for solar cell modules

A computer model including an integration routine was developed and demonstrated to simulate, in principle, the chemical changes which may occur in the photooxidation of hydrocarbons, using as input data a set of elementary reactions, corresponding rate constants and appropriate starting conditions. Application of this model to the photooxidation of pottant and plastic materials used in the LSA module designs provides a reliable predictive capability regarding the useful lifetime of these materials. An earlier mechanism consisting of 46 reactions was simplified considerably by reducing the number of formal termination steps since it became apparent that the major termination process goes via the peroxy radicals. In addition, new reactions of oxygen with acryl radicals (from Norrish type I) to form peracids, which then decompose to form carbon dioxide are included.

Somersall, A. C.↗
NASA NTRS1981

Modelling of polymer photodegradation for solar cell modules

A computer program developed to model and calculate by numerical integration the varying concentrations of chemical species formed during photooxidation of a polymeric material over time, using as input data a choice set of elementary reactions, corresponding rate constants and a convenient set of starting conditions is evaluated. Attempts were made to validate the proposed mechanism by experimentally monitoring the photooxidation products of small liquid alkane which are useful starting models for ethylene segments of polymers like EVA. The model system proved in appropriate for the intended purposes. Another validation model is recommended.

Somersall, A. C.↗
NASA NTRS1981

Feasibility study of deformation modes of deforming composite materials using visioplasticity method

The impact resistance and the effect of impact on fiber reinforced composite materials was investigated. The visioplastic method for studying deformation modes and transient impact distribution is described and the basic equations used in the visioplastic method are presented. The subroutine for digitizing the input data and a computer program (STRESS) for calculating the strains and stresses of deforming projectiles are presented.

Dwivedi, S. N.↗
NASA NTRS1981

Optical implementation of systolic array processing

Algorithms for matrix vector multiplication are implemented using acousto-optic cells for multiplication and input data transfer and using charge coupled devices detector arrays for accumulation and output of the results. No two dimensional matrix mask is required; matrix changes are implemented electronically. A system for multiplying a 50 component nonnegative real vector by a 50 by 50 nonnegative real matrix is described. Modifications for bipolar real and complex valued processing are possible, as are extensions to matrix-matrix multiplication and multiplication of a vector by multiple matrices.

Caulfield, H. J.↗
NASA NTRS1982

Software reliability: Repetitive run experimentation and modeling

A software experiment conducted with repetitive run sampling is reported. Independently generated input data was used to verify that interfailure times are very nearly exponentially distributed and to obtain good estimates of the failure rates of individual errors and demonstrate how widely they vary. This fact invalidates many of the popular software reliability models now in use. The log failure rate of interfailure time was nearly linear as a function of the number of errors corrected. A new model of software reliability is proposed that incorporates these observations.

Nagel, P. M.↗
NASA NTRS1982

NASTRAN thermal analyzer in a unified finite-element treatment of thermo-structural analyses

The NASTRAN thermal analyzer (NTA) which performs large-scale unified thermo-structural analyses with the NASTRAN (NASA structural analysis) computer program is described. The mathematical similitude between these two distinct disciplines of thermal and structure is examined. It serves as the theoretical basis upon which the implementation of the thermal capability in NASTRAN was accomplished. The program structure, the functional flow, the solution algorithms, the organization of an input data deck and the solution capabilities of NTA are summarized. Emphasis is placed on the interface of the unified approach in thermo-structural analyses where stresses, deflections, vibrations and bucklings induced by the effect of temperature change are of concern. Attentions are also directed to the preprocessor and post processors. As a specially designed preprocessor, the VIEW program is capable of generating exchange factors which can be output, at user's option, in formats compatible with that required by NTA. Two post processors that serve specific objectives are included. They are the thermal variance analysis and the graphical displaying capability of temperatures in color or black and white.

Lee, H. P.↗
NASA NTRS1982

Recent developments in thermal radiation system analyzer (Trasys)

Changes in the thermal radiation analyzer system (TRASYS) computer program are discussed. New capabilities were added while keeping intact the same data input structure. An overview of the program structure and general capabilities is given. Where appropriate, assessments are made of new features. The application of TRASYS peripheral programs and the importance they have in developing a totally integrated thermal analysis system are discussed. Form factor computations times were reduced approximately 40 percent, and the longer flux runs were reduced 50 percent when shadow tables were used.

Vogt, R. A.↗
NASA NTRS1981

Application of Computer Axial Tomography (CAT) to measuring crop canopy geometry

The feasibility of using the principles of computer axial topography (CAT) to quantify the structure of crop canopies was investigated because six variables are needed to describe the position-orientation with time of a small piece of canopy foliage. Several cross sections were cut through the foliage of healthy, green corn and soybean canopies in the dent and full pod development stages, respectively. A photograph of each cross section representing the intersection of a plane with the foliage was enlarged and the air-foliage boundaries delineated by the plane were digitized. A computer program was written and used to reconstruct the cross section of the canopy. The approach used in applying optical computer axial tomography to measuring crop canopy geometry shows promise of being able to provide needed geometric information for input data to canopy reflectance models. The difficulty of using the CAT scanner to measure large canopies of crops like corn is discussed and a solution is proposed involving the measurement of plants one at a time.

Bauer, M. E.↗
NASA NTRS1981

Numerical prediction of the monsoon depression of 5-7 July, 1979

The objective analysis and assimilation procedure with the FGGE/MONEX data are described. Numerical predictions with the GLAS general circulation model were made from the two initial conditions arrived at by assimilating the two different data sets. The model, the analysis and assimilation procedure, the differences in the analyses due to different data inputs, and the differences in the numerical prediction of monsoon depressions are outlined.

Shukla, J.↗
NASA NTRS1982

Steady, Oscillatory, and Unsteady Subsonic and Supersonic Aerodynamics, production version 1.1 (SOUSSA-P1.1). Volume 2: User/programmer manual. Addendum 1: Analytical treatment of wake influence

The influence of the trailing wake at each wing panel center is investigated. The effect of the wake is calculated by analyzing the wake as being subdivided into trailing wake strips. With the improved program there are two optional ways of calculating the wake effect, and the choice is controlled by an added parameter KANW that is part of the input data.

Cunningham, H. J.↗
NASA NTRS1982

Aeroelastic analysis for helicopter rotors with blade appended pendulum vibration absorbers. Mathematical derivations and program user's manual

Mathematical development is presented for the expanded capabilities of the United Technologies Research Center (UTRC) G400 Rotor Aeroelastic Analysis. This expanded analysis, G400PA, simulates the dynamics of teetered rotors, blade pendulum vibration absorbers and the higher harmonic excitations resulting from prescribed vibratory hub motions and higher harmonic blade pitch control. Formulations are also presented for calculating the rotor impedance matrix appropriate to these higher harmonic blade excitations. This impedance matrix and the associated vibratory hub loads are intended as the rotor blade characteristics elements for use in the Simplified Coupled Rotor/Fuselage Vibration Analysis (SIMVIB). Sections are included presenting updates to the development of the original G400 theory, and material appropriate to the user of the G400PA computer program. This material includes: (1) a general descriptionof the tructuring of the G400PA FORTRAN coding, (2) a detaild description of the required input data and other useful information for successfully running the program, and (3) a detailed description of the output results.

Bielawa, R. L.↗
NASA NTRS1982

Coupled rotor/airframe vibration analysis program manual manual. Volume 1: User's and programmer's instructions

user instruction and software descriptions for the base program of the coupled rotor/airframe vibration analysis are provided. The functional capabilities and procedures for running the program are provided. Interfaces with external programs are discussed. The procedure of synthesizing a dynamic system and the various solution methods are described. Input data and output results are presented. Detailed information is provided on the program structure. Sample test case results for five representative dynamic configurations are provided and discussed. System response are plotted to demonstrate the plots capabilities available. Instructions to install and execute SIMVIB on the CDC computer system are provided.

Cassarino, S.↗
NASA NTRS1980

An error analysis of basic kinematic quantities

A description is presented of the computational procedures used to obtain spatial fields of relative vorticity, advection of vorticity, horizontal divergence, and vertical motion. An investigation is conducted of the effectiveness of these procedures to reduce the effects of deliberately introduced random errors, giving attention to the confidence which can be placed on values of the derived parameters. It is concluded that fields of 500 mb vorticity and 700 mb vertical velocity, which are frequently used in synoptic scale forecasting schemes, show minimal effects of the deliberately introduced errors. Vorticity advection is found to be the most sensitive term to input data errors. Large fluctuations in fields of this parameter are evident both statistically and qualitatively.

Berecek, E. M.↗
NASA NTRS1982

Mathematical modeling of ice accretion on airfoils

The progress toward development of a computer model suitable for predicting icing behavior on airfoils over a wide range of environmental conditions and airfoils shapes is reported. The LEWICE program was formulated to solve a set of equations which describe the physical processes which occur during accretion of ice on an airfoil, including heat transfer in a time dependent mode, with the restriction that the flow must be describable by a two-dimensional flow code. Input data comprises the cloud liquid water content, mean droplet diameter, ambient air temperature, air velocity, and relative humidity. A potential flowfield around the airfoil is calculated, along with the droplet trajectories within the flowfield, followed by local values of water droplet collection efficiency at the impact points. Both glaze and rime ice conditions are reproduced, and comparisons with test results on icing of circular cylinders showed good agreement with the physical situation.

Macarthur, C. D.↗
NASA NTRS1982

Development and validation of preliminary analytical models for aircraft interior noise prediction

Predictions are made of the transmission of sound into an unpressurized and unstiffened cylinder under random and harmonic excitations, in order to validate the preliminary version of an airplane interior noise prediction model which is based on an analysis of the power flow type. The predictions are compared to experimental results, and statistically significant differences between predictions and measurements are found to be primarily due to input data deficiencies. Because the model requires only the value of a simple integral for determining interior spatial coupling, and resonance frequencies to determine frequency coupling, the known dynamics of the fuselage can be utilized without difficulty.

Pope, L. D.↗
NASA NTRS1982

Advancements in aerothermodynamics in support of the Galileo probe

The Galileo probe, scheduled for launch in 1985, will experience the most severe heating environment ever encountered for a planetary mission, and the probe design should be based on a reliable definition of the aerothermal environment during entry. Significant advances in numerical computations make possible the prediction of such complicated flowfields, which include the effects of massive ablation injection, radiative transfer, turbulence, shape change and small angle of attack. Also included is a discussion of modeling and data inputs for numerical computations as deduced from both experimental and analytical studies concerning: radiation, transport and thermodynamic properties; probe afterbody flowfield and heating conditions; and the role of ablator spallation.

Moss, J. N.↗
NASA NTRS1983

Off-Design Turbine Modeling

Off-design efficiency and flow function obtained from design point input data. Computer program PART improved method of representing turbine component when preforming calculations of off-design-point data to total efficiency over range of pressure ratios and speeds specified by user. PART written in FORTRAN IV.

Converse, G. L.↗
NASA NTRS1984

Algorithm for Constructing Contour Plots

General computer algorithm developed for construction of contour plots. algorithm accepts as input data values at set of points irregularly distributed over plane. Algorithm based on interpolation scheme: points in plane connected by straight-line segments to form set of triangles. Program written in FORTRAN IV.

Johnson, W.↗