Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Inertia”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 793 records · Page 44
All sourcesNASA NTRSDOE OSTI
NASA NTRS1974

Investigation of the effect of hub support parameters on two-bladed rotor oscillatory loads

The results are presented of a test program and analysis to investigate the effects of inplane hub support parameters on the oscillatory chordwise loads of a two-bladed teetering rotor. The test program was conducted in two phases. The first consisted of a shake test to define the impedance of a number of test configurations as a function of frequency. The second phase was the test of these configurations in the NASA-Langley transonic dynamics tunnel. The test showed that the one-per-rev inplane bending moments could be changed by a factor of 2.0 as a function of the pylon configuration at the same aerodynamic operating condition. The higher harmonic inplane, flapwise, and torsional bending moments, and pitch link axial loads were not affected by changes in inplane hub impedance. The maximum inplane loads occurred for the pylon configuration with the minimum spring rate and maximum inertia.

Lee, C. D.↗
NASA NTRS1974

Transient Response of Shells of Revolution by Direct Integration and Modal Superposition Methods

The results of an analytical effort to obtain and evaluate transient response data for a cylindrical and a conical shell by use of two different approaches: direct integration and modal superposition are described. The inclusion of nonlinear terms is more important than the inclusion of secondary linear effects (transverse shear deformation and rotary inertia) although there are thin-shell structures where these secondary effects are important. The advantages of the direct integration approach are that geometric nonlinear and secondary effects are easy to include and high-frequency response may be calculated. In comparison to the modal superposition technique the computer storage requirements are smaller. The advantages of the modal superposition approach are that the solution is independent of the previous time history and that once the modal data are obtained, the response for repeated cases may be efficiently computed. Also, any admissible set of initial conditions can be applied.

Stephens, W. B.↗
NASA NTRS1972

A Structural Design for an Externally Blown Flap (EBF) Medium STOL Research Aircraft

A computer program to predict, by reference to structural drawings, the dynamic response of a high lift STOL wing with externally blown flaps was developed. Structural data for the computer program are presented in the form of sketches, weight and dynamic loads information graphs, and tables for an external blown, triple-slotted flap, high lift STOL transport wing. Weight, mass distribution, and moment of inertia data are summarized in table form and presented pictorially by drawing layout. The methods used for obtaining weight data were: (1) actual know, weight of components, (2) preliminary stress sizing, and (3) statistical weight estimating methods.

Source record↗
NASA NTRS1974

Dynamic Docking Test System (DDTS) active table computer program NASA Advanced Docking System (NADS)

A computer program was developed to describe the three-dimensional motion of the Dynamic Docking Test System active table. The input consists of inertia and geometry data, actuator structural data, forcing function data, hydraulics data, servo electronics data, and integration control data. The output consists of table responses, actuator bending responses, and actuator responses.

Gates, R. M.↗
NASA NTRS1974

The effect of cyclic feathering motions on dynamic rotor loads

The dynamic loads of a helicopter rotor in forward flight are influenced significantly by the geometric pitch angles between the structural axes of the hub and blade sections and the plane of rotation. The analytical study presented includes elastic coupling between inplane and out-of-plane deflections as a function of geometric pitch between the plane of rotation and the principal axes of inertia of each blade. The numerical evaluation is based on a transient analysis using lumped masses and elastic substructure techniques. A comparison of cases with and without cyclic feathering motion shows the effect on computed dynamic rotor loads.

Harvey, K. W.↗
NASA NTRS1974

Comparison of flight data and analysis for hingeless rotor regressive inplane mode stability

Analytical and experimental data obtained during the development of the AH-56A covering stability of the regressive inplane mode, including coupling with other modes such as body and rotor plunge are reported. Data were obtained on two distinctly different control systems; both gyro controlled, but one with feathering moment feedback and the other with direct flapping feedback. A review was made of analytical procedures employed in investigating the stability of this mode and a comparison was made of the analytical and experimental data. The effect of certain parameters including blade droop, sweep, delta 3, alpha 1, vehicle roll inertia, inplane frequency, and rpm and forward speed on the mode were also reviewed. It was shown that the stability of this mode is treatable by analysis and that adequate stability is achievable without recourse to auxiliary inplane damping devices.

Anderson, W. D.↗
NASA NTRS1973

A refined analysis of composite laminates

The purpose of this paper is to develop a sufficiently accurate analysis, which is much simpler than exact three-dimensional analysis, for statics and dynamics of composite laminates. The governing differential equations and boundary conditions are derived by following a variational approach. The displacements are assumed piecewise linear across the thickness and the effects of transverse shear deformations and rotary inertia are included. A procedure for obtaining the general solution of the above governing differential equations in the form of hyperbolic-trigonometric series is given. The accuracy of the present theory is assessed by obtaining results for free vibrations and flexure of simply supported rectangular laminates and comparing them with results from exact three-dimensional analysis.

Srinivas, S.↗
NASA NTRS1973

Control of spin ambiguity during reorientation of an energy dissipating body

A quasi-rigid body initially spinning about its minor principal axis and experiencing energy dissipation will enter a tumbling mode and eventually reorient itself such that stable spin about its major principal axis is achieved. However, in this final state the body may be spinning in a positive or negative sense with respect to its major axis and aligned in a positive or negative sense with the inertially fixed angular momentum vector. This ambiguity can be controlled only through an active system. The associated dynamical formulations and simulations of uncontrolled reorientations are presented. Three control schemes are discussed and results offered for specific examples. These schemes include displacement of internal masses, spinning up of internal inertia, and reaction jets, all of which have demonstrated the ability to control spin ambiguity.

Kaplan, M. H.↗
NASA NTRS1973

Mars gravity derived from the long-period motion of Mariner 9

The spherical harmonic coefficients in the Mars gravity field are determined using a two-stage filtering process. In the first stage, a weighted least-squares orbit determination processor is applied to Mariner 9 radio data to estimate the mean Kepler elements of each orbit. A finite difference method is then used to generate orbital element rates. In the second stage, the gravity coefficients are determined using another weighted least-squares processor which fits the long period Lagrange perturbation equations to the estimated rates. The resulting gravity potential and associated equipotential surface is presented and error sources discussed. Gravity field results are applied to various physical properties of Mars, such as moments of inertia.-

Ferrari, A. J.↗
NASA NTRS1974

Density within the moon and implications for lunar composition

A number of simple density models for the moon are discussed. The considered models are consistent with the lunar mass and moment of inertia, the latest information on the seismic velocity of the lunar crust and mantle, and assorted estimates of temperature in the lunar interior. New material presented includes the implications for density models of recent seismic evidence for a thin, high velocity layer beneath the lunar crust and for a zone of partial melting below 1000 km depth. The consequences of a dense, iron-rich central core are also explored.

Solomon, S. C.↗
NASA NTRS1974

On the status of the rotation of Venus

Owing to its extremely slow rotation, Venus must be regarded as a triaxial body with differences of all three principal moments of inertia comparable in magnitude, thus rendering it a body essentially different from a rapidly rotating planet. The dynamical problem then arises of how such a body, with a rotation-period comparable with its orbital period, would be affected by couples exerted upon it by the gravitational action of the sun. Equations for the rotatory motion are set up in a form suitable for numerical solution by machine-calculations, but the problem so presented can be adequately investigated only for a hypothetical planet. Results obtained on this limited basis nevertheless suggest that for the actual planet the direction of the rotation axis may move almost randomly between the two hemispheres defined by the orbital plane and thus that the present direction near the south celestial pole of the orbit may be only a temporary situation.

Lyttleton, R. A.↗
NASA NTRS1974

The M.I.T. Blowdown compressor facility

A blowdown compressor test facility has been developed which allows time-resolved aerodynamic testing of full-scale transonic compressor rotors at low cost. The rotor is brought to speed in vacuum, a diaphragm is opened, and the test gas is allowed to flow for a time of the order of 0.1 sec, during which the rotor is driven by its own inertia. Both 'steady-state' performance evaluation and detailed time resolution of the flow on the blade-passing time scale have been demonstrated for a two-ft-diam transonic rotor with a tangential Mach number of 1.2 and a nominal pressure ratio of 1.6. The steady-state performance as determined in the experiments includes an efficiency of 0.92 and a pressure ratio of 1.55 at design speed. The time-resolved measurements include the combination tone structure in the upstream flow field, resolved both axially and radially, and the wake structure downstream of the rotor, also resolved both radially and axially.

Kerrebrock, J. L.↗
NASA NTRS1974

Preliminary infrared radiometry of the night side of Mercury from Mariner 10

The infrared radiometer on Mariner 10 measured the thermal emission from the planet with a spatial resolution element as small as 40 kilometers in a broad wavelength band centered at 45 micrometers. The minimum brightness temperature (near local midnight) in these near-equatorial scans was 100 K. Along the track observed, the temperature declined steadily from local sunset to near midnight, behaving as would be expected for a homogeneous, porous material with a thermal inertia only slightly larger than that of the moon. From near midnight to dawn, however, the temperature fluctuated over a range of about 10 K.

Chase, S. C.↗
NASA NTRS1974

Turbulent diffusion with memories and intrinsic shear

The first part of the present theory is devoted to the derivation of a Fokker-Planck equation. The eddies smaller than the hydrodynamic scale of the diffusion cloud form a diffusivity, while the inhomogeneous, bigger eddies give rise to a nonuniform migratory drift. This introduces an eddy-induced shear which reflects on the large-scale diffusion. The eddy-induced shear does not require the presence of a permanent wind shear and is intrinsic to the diffusion. Secondly, a transport theory of diffusivity is developed by the method of repeated-cascade and is based upon a relaxation of a chain of memories with decreasing information. The full range of diffusion consists of inertia, composite, and shear subranges, for which variance and eddy diffusivities are predicted. The coefficients are evaluated. Comparison with experiments in the upper atmosphere and oceans is made.

Tchen, C. M.↗
NASA NTRS1973

A novel triaxial vibration test technique

The present work examines the circumstances under which simultaneous multiaxial vibration testing may be desirable, the testing techniques and equipment required to make it feasible, and the type of results that may be obtained together with some practical limitations to the techniques. Two schemes for performing vibration testing simultaneously or sequentially along three mutually perpendicular axes are considered and the most promising, involving a 'floating' technique, is presented in some detail. Practical problems associated with jig design and system resonances, cross-coupling between the various degrees of freedom, secondary loads on shaker elements, and system drift, are considered and workable solutions proposed. A simple simulation of multiaxial testing of a 1.1-pound inertia-simulated model of an Apollo command module is presented.

Wignot, J. E.↗
NASA NTRS1974

The thermal state and internal structure of Mars

The evolution and state of the interior of Mars are studied through the use of theoretically calculated thermal history and density models. Invoking melting of an Fe-FeS mixture permits initial core formation within the first billion years. At the present time the core radius ranges from about 1300 to 1800 km, depending on composition, and the core is liquid even if the composition is varied from the eutectic. Large-scale differentiation of the silicates occurs in the last 2 b.y. When the mean density is 3.96 g/cu cm, the radius is 3389 km, and the moment of inertia factor is 0.377, the density models indicate high mantle densities near 3.74 g/cu cm. Thus an FeO content of about 29% is implied, consistent with the production of a low-viscosity magma. Chemical models of the Martian mantle indicate a composition primarily of olivine with about 56% forsterite.

Johnston, D. H.↗
NASA NTRS1974

The Langley cryogenic high Reynolds number wind-tunnel program

A pilot version of a new type of transonic tunnel was placed in operation in the fall of 1973. In the tunnel the cryogenic method is used to obtain a high Reynolds number. The cryogenic concept employs low temperatures to increase the Reynolds number through reducing the viscous forces rather than increasing the inertia forces. The cryogenic approach offers the desired Reynolds-number increase with no increase in dynamic pressure, and therefore no increase in model loads. A series of aerodynamic experiments have been made in the pilot tunnel to confirm the cryogenic concept at transonic speeds. A brief description is given of the project for a large tunnel which has evolved from the investigations.

Polhamus, E. C.↗