Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Airframes”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 775 records · Page 43

TPSAS-NF1676L-23328-DND

Objectives - Environmentally Responsible Aviation (ERA) Project - NASA and The Boeing Company collaboration on damage arresting composites - 10% airframe weight reduction can provide significant reduction in fuel burn and emissions - Incremental improvements to conventional “tube & wing” configuration insufficient to meet the goals - HWB configuration promises significantly improved aircraft performance - HWB requires pressurized composite airframe with nearly flat panels that transfers significant mechanical loads - Explore PRSEUS as the primary structural concept for HWB

Adam Przekop↗

Modified Epoxy Matrix Resins for Reduced Dependence on Redundant Fasteners in Secondary-Bonded Composite Structures

In structural bonds, the interface between adherend and adhesive is nearly two-dimensional making it susceptible to minute quantities of contamination that can lead to weak bonds. No methods currently exist to measure the strength of an adhesive bond nondestructively. For these reasons, regulating organizations such as the Federal Aviation Administration (FAA) often require redundant load paths in secondary-bonded, primary-structures to achieve certification for civil transport aircraft. To meet this requirement, manufacturers commonly install redundant fasteners (~105 fasteners in a twin-aisle airframe with composite fuselage and wings), which add tremendous complexity, time and cost, and significantly reduce performance of the airframe. Under NASA’s Convergent Aeronautics Solutions (CAS) Program, the Adhesive Free Bonding of Composites (AERoBOND) project is investigating reformulated aerospace epoxy matrix resins to enable reflow and diffusion of the resin at the interface during a secondary bonding/cure process. The mixing process eliminates the material discontinuity at the interface, thereby removing the dependence of bond performance on adhesion across a nearly two-dimensional boundary. The AERoBOND interface is similar to the interlaminar region formed during a co-cure process, so joint performance depends on the cohesive properties of the matrix resin, which can be measured, inspected non-destructively, and certified for flight with fewer redundant fasteners. This presentation describes the ongoing development of stoichiometrically-offset epoxy resins to control the degree of cure in composite joints and enable interfacial mixing during secondary bonding/curing. Details on the resin formulation, laminate fabrication, and mechanical testing will also be presented. The precracked mode-II fracture toughness measured from preliminary AERoBOND joints was similar for joints fabricated with conventional epoxy matrix materials.

thermoset, hardener, prepreg, assembly↗

AERoBOND Project Summary

Under NASA’s Convergent Aeronautics Solutions (CAS) project, the Adhesive-Free Bonding of Complex Composites (AERoBOND) project investigated off-stoichiometric epoxy polymers for fast, reliable assembly of epoxy matrix composite structures. The project goal was to demonstrate feasibility of the AERoBOND joining method by demonstrating mechanical properties greater than 80% of conventional co-cured materials while reducing structure weight by 1%. The project consisted of three convergent research areas: material and process development, systems analysis, and material and process modeling. Material and process development was the largest component of AERoBOND with approximately 6 FTE and 1WYE of support to formulate and characterize new resins, prepare carbon fiber prepregs, fabricate laminates, measure mechanical properties, analyze failure results, and select material and process improvements. The systems analysis activity estimated the potential reduction in part count and aircraft weight by comparing models of composite wing boxes with no fasteners (co-cured structure), fasteners in major joints (co-cured stringers), and fasteners in all joints. The materials and process modeling activity included a molecular model of the AERoBOND materials system to predict mechanical properties of resins with offset stoichiometry and a process model to predict the effect of resin formulation and processing conditions on the extent of mixing and degree of cure in a finished joint. As the number of airline passenger trips doubles in the next 20 years (IATA/Tourism Economics Air Passenger Forecasts, April 2019), the increased demand for new commercial aircraft is now the single greatest technical challenge to the airframe manufacturing industry. To meet efficiency requirements, new aircraft must be fabricated primarily from high performance structural composites, but manufacturing processes are inherently slow with the largest bottleneck attributed to assembly and installation of fasteners (NASA/TM–2019-220428). Manufactures of commercial transport aircraft are compelled to install more than 100,000 redundant fasteners into bonded joints to prevent failures due to unpredictable weak bonds. In structural adhesive bonds, the interface between adherend and adhesive is nearly two-dimensional making it susceptible to minute quantities of contamination, which can cause weak bonds. Currently, bond strength assessment is only possible through destructive testing (i.e., breaking the joint). For these reasons, regulatory organizations such as the Federal Aviation Administration (FAA) often require redundant load paths in secondary-bonded, primary-structures to alleviate concerns with bond performance. The AERoBOND process enables reflow of matrix resin during assembly to eliminate the material discontinuity at the interface, thereby eliminating the dependence of mechanical performance on interfacial adhesion. The AERoBOND joint is equivalent to the interlaminar region obtained during a co-cure process, so joint performance depends on the cohesive properties of the matrix resin. Conventional co-cured structures, although too costly and complex for large-scale manufacturing, are trusted by manufacturers and regulators, and are certified for flight with few or no redundant fasteners.Systems analysis performed on a composite wing model at the scale of a single-aisle commercial transport aircraft indicated that >20,000 redundant fasteners per wing could be eliminated by implementing the AERoBOND joining method. A total weight reduction of 15% was predicted in a wing box by eliminating fasteners and thinning components that must no longer support localized fastener loads and accommodate fastener dimensions. Interlaminar shear fracture toughness measured by the end-notched flexure test was greater than 1 kJ/m2 (nearly 140% of the co-cured benchmark property), which is greatly in excess of the project goals for mechanical properties. Testing was planned to measure interlaminar tensile fracture toughness as well as interlaminar tensile and shear strengths using the same AERoBOND configuration, but was delayed due to closure of LaRC facilities during the COVID-19 pandemic. The AERoBOND process model is partially validated and available for experimental use. It allows the user to input AERoBOND process parameters such as material composition, laminate configuration, and cure cycle to predict the final cure state of the AERoBOND joint. A preliminary, multi-scale material model was developed to predict AERoBOND joint mechanical properties (stiffness and strength) based on the cure state of the joint provided by the process model. The timing for transition of this technology within NASA is excellent as NASA initiates new enduring projects to address composites manufacturing rate challenges. AERoBOND technology is well suited to AAVP/AATT objectives for rapid manufacturing of a composite wing. A minimal effort (1 FTE/$15k procurement/0 WYE) is proposed in FY21 to continue a minor mechanical testing effort and maintain a SAA with ASX composites to develop commercial quality prepreg material. An RFI with the composites industry is suggested to quantify the technology gap between the current TRL and the TRL needed for transition to industry. A moderate effort [3-4 FTE/$150k/1 WYE (~$115k)] is proposed in FY22 for the “high rate composites manufacturing” project currently in planning. The partnership with ASX Composites will be expanded to produce material for sub-element/element-scale “panel-off” activities. Industry partnerships with airframe manufacturers is an expected component to explore damage tolerance and environmental stability. Further development of multi-scale modeling tools (process model, meso-scale model, and molecular model) is planned to enhance and deliver tools for rapid manufacturing infusion.

Frank Louis Palmieri↗

Performance Analysis of Optimized STARC-ABL Designs Across the Entire Mission Profile

Boundary layer ingestion (BLI) offers the potential for significant fuel burn reduction by exploiting strong aeropropulsive interactions. NASA’s STARC–ABL concept uses an electri- cally powered BLI tail cone thruster on what is otherwise a traditional airframe. Despite the traditional airframe of this configuration, aeropropulsive integration is critical to the perfor- mance of the BLI propulsor. Furthermore, due to being electrically powered, the fan pressure ratio and efficiency of the BLI tail cone thruster vary widely across the flight envelope, and this variation in fan performance must be accounted for with the aeropropulsive integration of the BLI system. Thus, accurate performance prediction for this novel propulsion configu- ration requires the use of a coupled aeropropulsive model across the flight envelope. In this work, we analyze the off-design performance of 18 optimized designs using an aeropropulsive model that is built with the OpenMDAO framework to couple 3-D RANS CFD simulations to 1-D thermodynamic cycle analyses. The designs are created via high-fidelity aeropropulsive design optimizations that span a range of fan pressure ratio and thrust values at the cruise conditions for the STARC-ABL concept, which was chosen as the aerodynamic design point for the propulsor. Performance analyses we present herein are then performed at a range of off-design flight conditions that span the flight envelope, including low-speed and low-altitude flight conditions. This study provides the first set of high-fidelity data for the STARC–ABL configuration at off-design conditions, and the results quantify the power savings through BLI compared to a traditional propulsion system across the entire mission profile.

optimization↗

Evaluation of VSPAERO Analysis Capabilities for Conceptual Design of Aircraft with Propeller-Blown Wings

Advancements in electric propulsion and the emergence of Advanced Air Mobility are driving the evolution of new aircraft designs. Since electric propulsion enables flexibility in propeller location, there is an increasing need for reliable, quick analyses of propeller-airframe interactions during the conceptual design phase. Many existing analysis tools capable of accurately modeling propeller-airframe interactions are computationally expensive and require a high level of expertise and significant time investment for setup. VSPAERO is a NASA-developed, open source, computational analysis tool that runs a Vortex-Lattice Method (VLM) solver and is targeted at conceptual design. This paper assesses the applicability of the VSPAERO VLM in the conceptual design phase by comparing VSPAERO predictions to predictions by OVERFLOW, a Reynolds-Averaged Navier-Stokes Computational Fluid Dynamics solver, and RoBIN, another VLM tool. The paper details the modeling, meshing, and analysis techniques used within VSPAERO. Analyses were performed for a wing in isolation, a propeller in isolation, and then for two propeller-blown wing configurations: one with a propeller located at the midspan and another with a propeller located at the wingtip. The propeller was modeled both as an actuator disk and as rotating blades.

VSPAERO↗

Full-Envelope Aero-Propulsive Model Identification for Lift+Cruise Aircraft Using Computational Experiments

This paper describes a process utilizing computational fluid dynamics experiments to develop a reduced-order, integrated propulsion-airframe aerodynamic model for a lift+cruise electric vertical takeoff and landing (eVTOL) reference aircraft concept. eVTOL configurations exhibit aerodynamic characteristics of both fixed-wing and rotary-wing aircraft as well as complex phenomena, such as propulsion-airframe interactions. Consequently, conventional aircraft aerodynamic modeling strategies require modification when applied to these unique aircraft. A novel aero-propulsive modeling approach using design of experiments techniques and computational fluid dynamics simulations is postulated for modeling a lift+cruise aircraft configuration. Aero-propulsive models are developed throughout the operational flight envelope to enable continuous flight dynamics simulations from hover through forward flight. The model adequacy is assessed using validation data acquired separately from data used to identify the model and indicates that the models have sufficient predictive capability. Research findings are presented with a discussion of unique lift+cruise aircraft aerodynamic characteristics and practical strategies to inform future aero-propulsive modeling and simulation efforts for eVTOL aircraft.

lift+cruise↗

Performance of Coupled Physics Solvers for Multidisciplinary Hypersonic Flow Simulations on Several Classes of Computer Architectures

The application of hypersonic flow simulation tools to realistic flight scenarios will require the coupling of multiple physical effects to the baseline fluid dynamics. Such multiphysics effects can include the aerooelastic response of the airframe or engine components, dynamic transport of atmospheric particles, the deformation of solid-fluid interfaces that can ablate, pyrolyze, or erode, as well as a host of other processes, all of which are governed by unique sets of physical equations and models. Coupling multiple (and potentially disparate) physics solvers to a robust compressible flow solver poses additional challenges related to the stability, performance and scalability of the combined solver. The choices made during the software design process can therefore lead to a variation in simulation efficiency across different computer architectures. In this paper, we will consider two representative multiphysics hypersonic flow scenarios: the interaction of solid particulates with the flow field created by a hypersonic lifting body and the aerooelastic deformation of a model airframe under high-Mach-number flow conditions. For these simulations we explore the behavior of several hypersonic simulation tools, including Kestrel, FUN3D, US3D, and JENRE multiphysics framework, on several high performance computing systems containing various CPU and GPU architectures.

architecture↗

Hover and Forward Flight Performance Modeling of the Ingenuity Mars Helicopter

In 2015, NASA’s Jet Propulsion Laboratory partnered with Ames Research Center, Langley Research Center, and AeroVironment to develop Ingenuity, a small coaxial helicopter capable of flying within Mars’ unique atmospheric conditions. Ingenuity was successfully deployed from its protective shroud on the underside of the Mars 2020 Perseverance Rover and has flown 17 flights on Mars as of December 2021. A number of rotorcraft analysis tools were utilized, and a series of experimental tests were performed to ready Ingenuity for its launch with the Perseverance Rover in July 2020. In this paper, RotCFD, a Reynolds-averaged Navier-Stokes flow solver, is used to model Ingenuity in hover and forward flight for the purposes of validating tools to aid in the development of a future generation of Mars rotorcraft. The results from the RotCFD modeling are benchmarked against results from hover performance tests of the Ingenuity prototype in the 25-Foot Space Simulator at the Jet Propulsion Laboratory and are also compared to hover and forward flight predictions made by CAMRAD II, a well-known comprehensive rotorcraft analysis code. Surrogate performance models are trained to obtain a set of trimmed rotor settings for Ingenuity at different forward flight speeds, which are then used as inputs for the RotCFD forward flight simulations. Additionally, a study of the airframe-rotor interaction and a study of the aerodynamics of the individual airframe components of Ingenuity in forward flight are performed. Finally, to better understand performance predictions by RotCFD and CAMRAD II, a study is conducted on how sectional angles of attack in each code vary with radial station and azimuth.

Hover↗

Experimental and Computational Study of the X-59 Wind Tunnel Model at Glenn Research Center 8- by 6-foot Supersonic Wind Tunnel

The Commercial Supersonics Technology (CST) Project under the NASA Advanced Air Vehicles Program (AAVP) focuses on developing technologies for enabling designs of future commercial supersonic aircraft. Many different technology areas are being addressed, such as designing airframes for better efficiency, improving engine integration for minimizing noise, maximizing combustion efficiency, and reducing high-altitude emissions, but the greatest emphasis has been on understanding the contributions to sonic boom loudness and learning how to shape the airframe and integrate the engine(s) such that the boom noise is minimized.

CST↗

Analysis and Optimization of Baseline Single Aisle Aircraft for Future Electrified Powertrain Flight Demonstrator Comparisons

The purpose of this study is to provide baseline single-aisle vehicles for future comparisons NASA’s Electrified Powertrain Flight Demonstrator (EPFD) turbofan powered Vision Systems. Both a large single-aisle (≈150 passenger) and a small single-aisle (≈100 passenger) vehicle will be analyzed using NASA’s General Aviation Synthesis Program and a modernized Python-based version of this program that enables efficient gradient-based optimization of both the airframe and propulsion that currently is being referred to as GASPy. A technology build-up will be conducted to bring the current State-of-the-art vehicles to a projected 2035 technology level by incorporating estimations for improvements in aerodynamics, structures, and propulsions. These vehicles can be used in NASA’s future EPFD project as baselines to measure the benefits of future hybrid and fully electric aircraft against. The advanced, large single-aisle will then be used to demonstrate the benefits of a coupled engine-airframe optimization for fuel burn reduction.

Carl J Recine↗

A Field-Deployable Wireless Data Acquisition System for Ground-Test Arrays

This paper describes the development, characterization, and deployment of a field-deployable wireless data acquisition system for ground-test arrays, applicable in noise-source localization or beamforming measurements such as those encountered during airframe noise flyover measurement tests. The system design is enabled by commercially available, low-power Internet of Things (IoT) processors and Wi-Fi communication components. Time is synchronized across the array wirelessly by leveraging the Coordinated Universal Time (UTC) time provided by the Global Positioning System (GPS). Initial laboratory characterization of the system demonstrated its ability to meet acoustic bandwidth, dynamic range, time synchronization, environmental, and battery life requirements for typical ground-test array deployments. A successful system deployment at NASA Langley was performed that included measurement of a suspended elevated static noise source, and Uncrewed Aerial System (UAS) vehicle measurements using a quadcopter operated both in hover mode and forward flight. Beamform analysis of the acquired data showed an excellent ability of the array to extract accurate sound pressure levels from the suspended source. Synchronization of the array and vehicle GPS timecodes allowed the ability to extract acoustic signatures from the UAS vehicle during hover and forward flight maneuvers over the array. These results validate that the use of a high channel count wireless array is advantageous in airframe and propulsion noise flyover test campaigns.

wireless↗

Wind Tunnel Testing of Static Aerodynamic and Power Consumption Characteristics of an Octocopter

The introduction of multirotor unmanned aircraft systems (UAS) in low-altitude airspace poses significant safety challenges. Further development of advanced aviation systems is needed to realize the full potential of UAS applications, particularly for urban and beyond visual line-of-sight (BVLOS) operations. The NASA System Wide Safety (SWS) project is developing key technologies to mitigate future airspace safety risks involving autonomous aircraft operation in densely populated areas. An important part of these technologies requires flight dynamics and performance models to assess feasible trajectories, power consumption requirements, and operational envelope limitations. To support these efforts, this research seeks to improve the accuracy of multirotor aerodynamic models and investigate stability characteristics relevant to flight safety. This paper presents a recent study of an octocopter vehicle using the NASA Langley 12-Foot Low-Speed Tunnel (LST). Results from isolated-airframe (no propellers) and powered-airframe tests are presented. A one-factor-at-a-time (OFAT) approach was used to explore the effect of propeller advance ratio and vehicle angle of attack on vehicle forces, moments, and power consumption. The results show nonlinear aerodynamic behavior and indicate regions where aerodynamic interaction effects may be significant.

George V. Altamirano↗

Automated Fiber Placement Through Thickness Defect Stacking Optimization

In its 2022 commercial market outlook, Boeing forecasted an 80% increase in the global fleet through 2041 compared to 2019 pre-pandemic levels. This sharp rise in demand will drive pressure onto airframe manufacturers to ramp up production and find more efficient ways to design and manufacture airplanes. Complicating this challenge is the industry’s recent transformation from traditional metal-based airframes towards hybrid composite-metal aircraft. While composites have been used in aviation for decades, aircraft manufacturers are still struggling to design and manufacture quality parts at a high rate. Automated Fiber Placement (AFP) is one of the main manufacturing techniques used to produce large-scale composite parts. After a design has been created, a manufacturing strategy has to be developed based on the working material, part geometry, and machine capabilities. This process planning stage is essential to the AFP workflow and currently requires a high level of manual input from an experienced process planner. In an effort to automate and optimize this stage, the Computer Aided Process Planning (CAPP) module was developed. CAPP assists process planners in identifying optimal starting point location and layup strategy for each ply of a laminate. This Ply-Level Optimization (PLO) phase operates on the quantification of ply quality through predictable geometry-based defects such as gaps, overlaps, angle deviation, and steering. As you move from PLO to Laminate-Level Optimization (LLO) the design space grows exponentially, emphasizing the need for automated optimization. The work presented in this thesis expands CAPP’s functionality by comparing the planned fiber paths through the thickness of the laminate to mitigate stacked area defects and achieve an optimal laminate-level manufacturing strategy. Within CAPP, predicted gap and overlap defects are imported from Vericut Composites Programming (VCP) and then discretized to streamline the through-thickness comparison. Two objective functions are used to score different combinations of ply layup strategies based on defect stacking both globally and locally. Four combinatorial optimization algorithms were coupled with these objective functions to investigate the laminate-level manufacturing strategy design space and converge on the optimal plan. These algorithms were evaluated based on accuracy and efficiency through virtual testing on a complex tool surface. A separate LLO approach was developed to achieve near-optimal laminates in significantly less time. The end result is a software package which greatly reduces the required input from process planners, shortening the design-build cycle time and improving part quality.

AFP↗

High-Fidelity Simulations of Lift+Cruise VTOL Urban Air Mobility Concept Aircraft in Hover

This paper presents progress of high-fidelity multidisciplinary simulations for the NASA lift+cruise vertical takeoff and landing (VTOL) urban air mobility concept aircraft in hover. The study focuses on the unsteady flow solutions featuring strong wake interactions between rotors and the airframe. The simulations couple a high-fidelity aerodynamic model with a comprehensive rotorcraft aeromechanics tool with rotor rotation-speed trim. The aerodynamic model is based on the Reynolds-averaged Navier-Stokes equations using the one-equation Spalart-Allmaras turbulence model with rotation correction. Unsteady aerodynamic flows are computed on a dynamic, deformable, unstructured, overset grid system. An integrated overset-grid assembler is used to construct the composite grid from 23 component grids and facilitate communications between individual component grids. Rotor performance and airframe forces and moments are computed and compared on two unstructured grids. The study demonstrates capabilities of high-fidelity multidisciplinary analysis tools to capture the strong unsteady flowfield around this multi-rotor aircraft in hover.

CFD↗

High-Fidelity Simulations of Lift+Cruise VTOL Urban Air Mobility Concept Aircraft in Hover

This presentation presents progress of high-fidelity multidisciplinary simulations for the NASA lift+cruise vertical takeoff and landing (VTOL) urban air mobility concept aircraft in hover. The study focuses on the unsteady flow solutions featuring strong wake interactions between rotors and the airframe. The simulations couple a high-fidelity aerodynamic model with a comprehensive rotorcraft aeromechanics tool with rotor rotation-speed trim. The aerodynamic model is based on the Reynolds-averaged Navier-Stokes equations using the one-equation Spalart-Allmaras turbulence model with rotation correction. Unsteady aerodynamic flows are computed on a dynamic, deformable, unstructured, overset grid system. An integrated overset-grid assembler is used to construct the composite grid from 23 component grids and facilitate communications between individual component grids. Rotor performance and airframe forces and moments are computed and compared on two unstructured grids. The study demonstrates capabilities of high-fidelity multidisciplinary analysis tools to capture the strong unsteady flowfield around this multi-rotor aircraft in hover.

CFD↗

Comprehensive Analysis Aeroelastic Stability Predictions for the Mars Sample Recovery Helicopters and Ingenuity

A rotorcraft comprehensive analysis was used to generate aeroelastic stability predictions for both Ingenuity and the Mars Sample Recovery Helicopters. The analysis was performed multiple times for each rotor system with sequential increases to the level of modeling complexity. Initial cases used an independent blade analysis, trim inflow distribution, no airframe degrees of freedom, and a hover condition (a time-invariant problem). The final model used all blades, dynamic inflow, airframe degrees of freedom, and a Floquet theory approach to the flutter analysis. The approach of sequentially increasing modeling complexity was employed to ensure the causes of any observed instabilities could be identified. For each case, stability results were determined across a range of air densities, tip Mach numbers, and rotor collective pitch settings. For the Sample Recovery Helicopter, a forward flight condition analysis with the highest level of modeling complexity was also performed. The aeroelastic stability predictions showed both the Ingenuity and Sample Recovery Helicopter rotor systems to be stable for all analyzed conditions. Parameter excursions of structural properties were performed to explore conditions resulting in aeroelastic instabilities.

Aeroelastic↗

Experimental Investigation of a Boundary Layer Ingesting Tailcone Thruster Configuration at the National Transonic Facility

A transonic, high Reynolds number wind tunnel test of a Boundary Layer Ingesting Tailcone System (BLITS) was conducted in the National Transonic Facility (NTF) at the NASA Langley Research Center during the spring of 2023. The test was sponsored by the NASA Advanced Air Transport Technology Project and produced a large dataset to help in the development and validation of an integrated airframe-turbomachinery computational simulation capability. The Common Research Model with Tail Cone Thruster (CRM-TCT) configuration was tested at Mach numbers from 0.75 to 0.85 and Reynolds number based on mean aerodynamic chord from 5 to 15 million, with the objective of characterizing the tailcone nacelle inlet pressure and flow angle profile, characterizing the aftbody boundary layer (BL), and evaluating the overall airframe configuration performance. The test article included multiple tailcone nacelle assemblies with different measurement objectives, and each assembly was able to be controlled remotely and rotate in small increments, allowing for an increased measurement density for characterizing the nacelle inlet distortion. Additionally, the use of cryogenic-rated miniature BL rakes was successful in measuring boundary layer heights on the aftbody. Sensitivities of the measured quantities of interest to Mach number, Reynolds number, angle of attack, and nacelle weight flow rate are also presented.

boundary layer ingestion (BLI)↗

Experimental Investigation of a Boundary Layer Ingesting Tailcone Thruster Configuration at the National Transonic Facility

A transonic, high Reynolds number wind tunnel test of a Boundary Layer Ingesting Tailcone System (BLITS) was conducted in the National Transonic Facility (NTF) at the NASA Langley Research Center during the spring of 2023. The test was sponsored by the NASA Advanced Air Transport Technology Project and produced a large dataset to help in the development and validation of an integrated airframe-turbomachinery computational simulation capability. The Common Research Model with Tail Cone Thruster (CRM-TCT) configuration was tested at Mach numbers from 0.75 to 0.85 and Reynolds number based on mean aerodynamic chord from 5 to 15 million, with the objective of characterizing the tailcone nacelle inlet pressure and flow angle profile, characterizing the aftbody boundary layer (BL), and evaluating the overall airframe configuration performance. The test article included multiple tailcone nacelle assemblies with different measurement objectives, and each assembly was able to be controlled remotely and rotate in small increments, allowing for an increased measurement density for characterizing the nacelle inlet distortion. Additionally, the use of cryogenic-rated miniature BL rakes was successful in measuring boundary layer heights on the aftbody. Sensitivities of the measured quantities of interest to Mach number, Reynolds number, angle of attack, and nacelle weight flow rate are also presented.

boundary layer ingestion (BLI)↗