Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “High Temperature Methods”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 757 records · Page 42
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Imaginary-time correlation function thermometry: A new, high-accuracy and model-free temperature analysis technique for x-ray Thomson scattering data

The accurate interpretation of experiments with matter at extreme densities and pressures is a notoriously difficult challenge. In a recent work [Dornheim et al., Nat. Commun. 13, 7911 (2022)], we have introduced a formally exact methodology that allows extracting the temperature of arbitrary complex materials without any model assumptions or simulations. Here, we provide a more detailed introduction to this approach and analyze the impact of experimental noise on the extracted temperatures. In particular, we extensively apply our method both to synthetic scattering data and to previous experimental measurements over a broad range of temperatures and wave numbers. We expect that our approach will be of high interest to a gamut of applications, including inertial confinement fusion, laboratory astrophysics, and the compilation of highly accurate equation-of-state databases.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2020

Determining Multi-Component Phase Diagrams with Desired Characteristics Using Active Learning

Herein, we demonstrate how to predict and experimentally validate phase diagrams for multi-component systems from a high-dimensional virtual space of all possible phase diagrams involving several elements based on small existing experimental data. The experimental data for bulk phases for known systems represents a sampling from this space, and screening the space allows multi-component phase diagrams with given design criteria to be built. This approach uses machine learning methods to predict phase diagrams and Bayesian experimental design to minimize experiments for refinement and validation, all within an active learning loop. The approach is proven by predicting and synthesizing the ferroelectric ceramic system (1-ω)(Ba 0.61 Ca 0.28 Sr 0.11 TiO 3 )-ω(BaTi 0.888 Zr 0.0616 Sn 0.0028 Hf 0.0476 O 3 ) with a relatively high transition temperature and triple point, as well as the NiTi-based pseudo-binary phase diagram (1-ω)(Ti 0.309 Ni 0.485 Hf 0.20 Zr 0.006 )-ω(Ti 0.309 Ni 0.485 Hf 0.07 Zr 0.068 Nb 0.068 ) designed for high transition temperature (ω ≤ 1). Each phase diagram is validated and optimized through only three new experiments. The complexity of these compounds is beyond the reach of today’s computational methods.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Preliminary Process and Instrumentation Design of Advanced Reactor Integration with Refineries and Hydrogen Production Facilities

With the ongoing push to decarbonize energy use and especially greenhouse gas emissions across all sectors, there are incentives to investigate how nuclear reactors may be used to generate clean energy and be used in various energy economies beyond just the electrical grid. Two initial integrations, high temperature steam electrolysis (HTSE) and oil refineries, are investigated in this first DOE Integrated Energy Systems (IES) program detailed industrial integration design report. Increasingly detailed reports are anticipated both for the industries discussed in this report and for additional industries in the future of the program. This report is a robust starting point showing how integration thermodynamic analysis establishes the requirements on the reactor and methods by which those requirements can be evaluated for specific reactor designs. Two Advanced Reactor Demonstration Program awardees are selected as representative designs for their respective technologies: NuScale for light-water reactors (LWRs) and X-Energy for high temperature gas reactors (HTGRs). Other reactor technologies or specific reactor configurations would require specific analysis similar to what is done in this report, thus this report can be a reference point by which to extend this work to other nuclear plant designs.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2024

RESOLVING THE ELECTROCHEMICAL EQUATIONS OF A SOLID OXIDE FUEL CELL FOR USE IN TRANSIENT SIMULATION AND INTEGRATION INTO CYBER-PHYSICAL SYSTEMS

A major challenge with complex cyber-physical systems stems from long model computational time that creates a mismatch between the model system and the physical system. The numerical modeling of solid oxide fuel cells (SOFCs) presents particular challenges due to the highly coupled nature of the underlying equations and the multiphysics needed to fully resolve their behavior during a transient event. To this end current approaches revolve around splitting the computational efforts into resolving temperature effects and resolving electrochemical effects. Current methods employed for the transient simulation of an SOFC for implementation in the Hybrid Performance (HyPer) facility cyberphysical plant at the National Energy Technology Laboratory reveal a distinct need for accelerated results with a high degree of stability. To this aim, an investigation into the computational time for the code reveals that the underlying electrochemical algorithm takes an order of magnitude more time than its thermal counterpart and has a tendency to vary in terms of iteration time and as such a rework of the underlying system is proposed. The primary method for accelerated electrochemical algorithm solutions is to employ higher order root finding recipes for the resolution of the highly coupled electrochemical equations. This is done with the intention to reduce the overall number of subiterations necessary for resolving voltage, current density, and species concentration, properties of the fuel cell that are all directly coupled and require nested iterative approaches. The overall objective of this approach is an order of magnitude reduction in calculation time without sacrificing stability and increasing accuracy. Specific approaches involve using both bounded and unbounded techniques, such as the False Position method and the Secant method (or if applicable Newton-Raphson) respectively, the drawbacks being slower convergence for False Position and instability for the Secant or Newton-Raphson methods. Current preliminary results on simplified versions of the parent functions involved for electrochemical calculations indicate a reduction in computational steps by a factor of two for the secant method and a factor of three for Newton-Raphson. When implemented into new modified electrochemical algorithms, the results indicate a possible order of magnitude reduction in calculation time.

Arias, Jesus↗
DOE OSTI2025

Understanding the Existence of a Na 2 Dimer in a High-Spin State

The recent observation of a high-spin Na 2 dimer formed on the surface of liquid helium nanodroplets raises some fundamental questions, as the ground state of Na 2 is known to have zero spin. Is it protected against spontaneous dissociation? What is its binding energy and interatomic distance? Is it stable at a higher temperature? Using calculations based on density functional theory (with and without long-range interaction) and coupled cluster methods, CCSD(T), we show that the bonding in the high-spin Na 2 dimer is governed by van der Waals interaction with binding energy (bond length) varying between −0.030 eV (5.108 Å) and −0.192 eV (4.231 Å), depending on the computational method used. Thus, the experimental method used by Kresin and coworkers can be very useful to study larger metastable high-spin clusters such as Li 4 which was predicted in 1985 to have a tetrahedral structure carrying a magnetic moment of 2 μ B , while its ground state is planar and nonmagnetic.

Basis sets↗
DOE OSTI2022

Enabling technologies for the continuous electrically driven conversion of CO 2 and water to multi-carbon products at high current densities

Here, we demonstrate greatly improved conversion of CO 2 using a gas diffusion electrode (GDE) with flowing electrolyte configuration for CO 2 gas delivery in combination with a high surface area nickel phosphide electrocatalyst. This configuration achieves 40–50% selectivity for total carbon products over H 2 formation (HER) at total current densities ranging from 50 to 300 mA cm -2 . We developed a soft-templating method using CTAB detergent micelles for synthesis of phase-pure Ni 2 P, achieving a 260-fold larger surface area (BET) and porous sponge-like morphology that produces stable currents. This catalyst produces mainly one C-product, methylglyoxal (MG, C 3 H 4 O 2 ) with 38–47% overall selectivity, the highest reported selectivity for a 12-electron reduction product. The versatile soft-templating method for electrocatalyst synthesis uses low-temperature (185 °C) that is permissive for incorporation of co-catalysts that are otherwise destroyed by the high temperatures used in traditional solid-state synthesis (SSS). The non-porous Ni 2 P-SSS catalyst produces mainly H 2 at these current densities. Achieving these high currents and C/H selectivity benefits from use of hydrophobic polymers as co-catalyst binders (cationic = Nafion, anionic = PFAEM and neutral = PTFE) to improve CO 2 conversion. PFAEM is the better ionomer for the CO 2 RR at high current density, postulated as due to suppressing CO 2 conversion to inactive bicarbonate. Precipitation of the carbon products as a polycarbonate polymer occurs at high currents.

36 MATERIALS SCIENCE↗
DOE OSTI2024

High pressure melt line of nickel using a generalized embedded atomic method potential

As the second most abundant metal in the Earth's core, nickel plays an important role in determining the structure and temperature of the Earth's core. Yet, the melt line of Ni at pressures corresponding to the Earth's core has not been explored in the literature. Many previous experimental and simulation efforts have reported the melting point of Ni at pressures below 100 GPa, but there exist large discrepancies, most of which have persisted due to various experimental and simulation bottlenecks in handling extreme pressure and temperature conditions. We adopted the generalized embedded atom method, which overcomes the limitations of existing interatomic potentials, to probe phase stability and phase boundaries of Ni at pressures between 50 and 500 GPa. Further, the potential was validated by comparing the cold curves, phonon dispersion curves, and enthalpies of fusion with ab initio density functional theory calculations. Our analysis shows that face centered cubic (FCC) is stable, and the hexagonal close packed (HCP) and body centered cubic (BCC) phases are metastable close to the melt line. Melting temperatures at different pressures were obtained from two-phase co-existence simulations and take the following functional form: $T$ m = $1969.23+19.15P-0.012P$ 2 . In contrast to iron, differences between the melting points of the stable and metastable phases of Ni are less than 250 K at 300 GPa, and the difference in melting points of the metastable BCC and HCP phases changes sign at 500 GPa, which implies that the phase transition mechanisms during solidification can be very complex.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Development of an ERT‐Based Framework for Bentonite Buffers Monitoring From Laboratory Tests: 1. Characterizing Thermal–Hydrological–Mechanical Processes

Abstract Bentonite clay is widely used in engineered barrier systems for the permanent disposal of high‐level radioactive waste due to its low permeability, high swelling capacity, and thermal stability. However, the complex thermal‐hydrological‐mechanical (THM) processes induced by heating from decaying radioactive waste and hydration from surrounding rock can lead to heterogeneous changes that are difficult to measure and predict. This study develops an Electrical Resistivity Tomography (ERT)‐based framework for monitoring THM processes, progressing from sample‐scale to bench‐scale tests, to inform field‐scale applications. Sample‐scale tests analyzed small bentonite samples under controlled variations in water content, temperature, and porosity to establish fundamental resistivity relationships. Bench‐scale tests involved larger bentonite columns subjected to heating (up to 200°C) and hydration under controlled pressure, simulating repository conditions. ERT measurements, complemented by X‐ray CT imaging, temperature monitoring, and tracing sensors, revealed coupled THM processes, such as hydration‐induced compression, swelling, and thermal gradients, leading to complex resistivity patterns. The results demonstrate the potential of ERT for capturing THM‐induced resistivity changes, though challenges remain in upscaling and quantitative analysis. This study evaluates laboratory test capabilities and proposes future improvements for understanding THM‐induced resistivity responses. A conceptual framework for ERT implementation in field‐scale monitoring is presented, synthesizing findings from both scales and exploring how ERT data can inform long‐term modeling and reduce prediction uncertainties. Overall, this ERT‐based framework offers a robust method for monitoring bentonite buffers, aiding in early issue detection and supporting the safe long‐term disposal of radioactive waste in geological repositories, while highlighting the need for future development. Plain Language Summary Bentonite clay is crucial in engineered barrier systems (EBS) for containing high‐level radioactive waste due to its ability to absorb water, swell, seal and remain stable under high temperatures. When bentonite absorbs water and heats up from radioactive decay, it experiences complex changes in its physical and mechanical properties. Understanding these changes is important for ensuring the long‐term safety and effectiveness of EBS. This study used Electrical Resistivity Tomography (ERT), a non‐invasive method that measures electrical conductivity to monitor these changes during laboratory experiments. The ERT data revealed significant variations in resistivity corresponding to changes in water content, temperature, and density, providing detailed spatial and temporal insights into the behavior of bentonite. These findings enhance our ability to predict the long‐term performance of bentonite barriers, ensuring the safe containment of radioactive waste. By improving our understanding of bentonite's behavior, this research supports the development of more reliable and effective barrier systems for radioactive waste disposal, protecting the environment and public health. Key Points ERT monitoring was employed to capture resistivity changes in bentonite during controlled heating and hydration experiments, providing insights into THM processes ERT data reveal significant resistivity changes correlated with water content, temperature, and mechanical effects, enhancing the understanding of THM dynamics in bentonite This study explores the potential of the framework for application in field‐scale EBS monitoring, emphasizing the need for integrating additional geophysical methods for comprehensive subsurface imaging

Chen, Hang↗
DOE OSTI2021

Empirical prediction of saline water atomization pressure loss and spray phase change using local flow pressure analysis

A pressure analysis technique was developed to obtain spray spatial evaporation profile in a thermal desalination process. The technique can replace temperature-based evaporation measurement methods that are challenged by liquid-phase interference. It also provides an alternative to optical methods with high cost and complexity. Fundamental analysis was developed to determine local humidity ratios from changes in local static and dynamic pressures. The analysis was applied to data obtained from an external mixing air-assist atomizer. An empirical model was developed for the pressure loss in atomization process and was used in the analysis of humidity ratio. The results were used to develop empirical correlations for local humidity ratio in spray mediums using inlet conditions. Utilizing inlet conditions to predict evaporation profiles is an important contribution as it eliminates the need to take local spray measurements. Obtaining local data is often difficult and expensive; Our method and correlation circumvent the need for that. Finally, the correlations presented in this paper apply to saline water sprays with total dissolved salt of 0-10 wt%. The salinity-specific correlations are accurate to within ±10% of experimental data. The individual models were aggregated into a unified correlation for salinities within 0-10 wt%. The unified correlation is accurate to within ±18% of experimental data.

42 ENGINEERING↗
DOE OSTI2026

Predicting critical heat flux using localized sensing at invisible vapor-liquid interfaces

Predicting critical heat flux (CHF) in two-phase electronics cooling systems remains a significant challenge due to the sudden onset of boiling crisis and the difficulty in directly visualizing vapor-liquid interfaces. Existing sensing methods rely on lagging temperature measurements, optically accessible systems, or spatially averaged signals that cannot pinpoint CHF initiation at localized high-heat-flux regions. Here, we report a planar capacitive sensing approach that enables real-time, localized detection of vapor-liquid interface dynamics for CHF prediction in boiling heat transfer. The capacitive sensor exploits the dielectric constant difference between liquid and vapor phases to capture bubble nucleation, growth, and departure dynamics with a temporal resolution down to 2 ms. The capacitive sensing reveals distinct signals across boiling regimes: from high-frequency fluctuations during strong nucleate boiling to low-frequency fluctuations with increased amplitudes when approaching CHF. The multi-sensor array experiments demonstrate real-time localized sensing, where each sensor responds exclusively to boiling in its immediate vicinity without crosstalk from neighboring regions. This non-intrusive sensing approach provides predictive rather than lagging sensing signals of CHF occurrence, offering predictive diagnosis of two-phase liquid cooling for the thermal management of high-power-density electronics.

CHF↗
DOE OSTI2025

Advancements in the modification of TiFe alloys for enhanced hydrogen Storage: Strategies and future Directions

Hydrogen is considered a promising clean energy source, and a potential alternative to conventional fossil fuels. TiFe alloy has been particularly interesting due to its ability to reversibly absorb and desorb hydrogen at room temperature and low pressure. The initial hydrogen absorption stage of TiFe alloy requires activation under high-temperature and high-pressure conditions, which hinders its practical application. Here, this paper primarily examines the impact of elemental substitution methods on the hydrogen storage capabilities of TiFe alloys, with a particular emphasis on elucidating the mechanisms associated with various substituent elements. Commonly utilized elements, such as Mn, V, and Zr, significantly improve the activation performance of TiFe alloys. Additionally, the incorporation of elements such as Ni, Cr, Ce, and Y contributes to the modulation of phase composition, as well as the enhancement of activation and kinetic properties. However, there exists a notable deficiency in systematic investigations concerning alternative elements, coupled with a frequent oversight of the preparation process's influence on the hydrogen storage characteristics of these alloys. Consequently, the mechanisms by which different elements affect the hydrogen storage process in TiFe alloys remain inadequately understood among current research, thereby complicating the establishment of experiment-based design guidelines for TiFe alloys. Furthermore, the plasma treatment and high-entropy alloying present new approaches for optimizing the hydrogen storage properties of TiFe alloys. This paper aims to present novel research perspectives and insights to scholars in the field by introducing methods for the modification of TiFe alloys.

Hydrogen storage↗
DOE OSTI2020

Structure and good piezoelectric performance in the complex system of Pb[(Zn,Ni)Nb]O 3 –Pb[(In,Yb)Nb]O 3 –Pb(Zr,Hf,Ti)O 3

High-performance piezoelectrics are always demanded for the high-end application. In this study, a complex piezoelectric system of 0.49Pb(Zn 1/2 Ni 1/2 ) 1/3 Nb 2/3 O 3 – x Pb(In 1/2 Yb 1/2 ) 1/2 Nb 1/2 O 3 –(0.51 – x )Pb(Zr 1/2 Hf 1/2 ) 0.1 Ti 0.9 O 3 (0.16 ≤ x ≤ 0.23) was fabricated through the solid-state method. The structure, ferroelectric, piezoelectric, and dielectric properties were investigated. The optimum piezoelectric coefficient d 33 of 761 pC/N, high Curie temperature of 169 °C, dielectric permittivity ( ε r ) of 4557, and electromechanical coupling coefficient ( k p ) of 63% were found at the morphotropic phase boundary composition of x = 0.19, which are superior to other complex piezoelectric materials. In particular, a significant large-signal d 33 * of 913 pm/V and low strain hysteresis (6%) was obtained in the temperature range of 20–170 °C. Temperature-dependent x-ray diffraction (XRD) has demonstrated that good temperature stability is put down to the structure stability. The agreement between the calculated lattice strain from in situ high-energy synchrotron XRD data and the macroscopic measurements suggests that the large lattice strain has a dominant contribution to the high piezoelectric response. The high piezoelectric performance and good temperature stability makes it potential for application.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Analytic insights into nonlocal energy transport: Steady state Fokker Planck theory in arbitrary Z plasmas

The generation of energetic electrons in laser fusion in an important issue. The electrons may either arise from a laser plasma instability, or from the uncoupled high temperature tail of a Maxwellian distribution. To study these in a laser fusion context, it is important to find a method accurate enough to be useful, and simple enough to be incorporated into a radiation hydrodynamics numerical simulation, the main workhorse for studying the laser fusion target. That is why analytic insights become important, they allow one to simplify the Fokker Planck theory so that a solution of it can be incorporated into a radiation hydrodynamic simulation. This work develops and analyzes a steady state Fokker Planck theory for plasmas of arbitrary Z. It develops a method of solving the simplified Fokker Planck method with a technique called sparse eigenfunction analysis. As a result, this method appears to work reasonably well when compared to the experimental results from the Rochester/NIF on plastic spherical targets with and without a silicon layer.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2026

A novel method for thermal noise reduction, enabling measurements of broadband, low-amplitude electron temperature fluctuations using individual radiometer channels

A new analysis method has been developed for measurements of broadband, low-amplitude turbulent electron temperature fluctuations in fusion plasmas using individual radiometer channels of a correlation electron cyclotron emission diagnostic. This method takes advantage of differences in the correlation time of thermal noise compared to the correlation time of plasma fluctuations in fusion reactors. The validation of this single-channel method is demonstrated using comparisons with the standard dual-channel radiometer spectral decorrelation method for measurements of turbulent electron temperature fluctuations in the core and edge of low confinement (L), improved confinement (I), and high confinement (H)-mode plasmas at the ASDEX Upgrade tokamak.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2025

Gaussian-process generative model for the QCD equation of state

We develop a generative model for the nuclear matter equation of state at zero net baryon density using the Gaussian process regression method. We impose first-principles theoretical constraints from lattice quantum chromodynamics and hadron resonance gas at high- and low-temperature regions, respectively. By allowing the trained Gaussian process regression model to vary freely near the phase transition region, we generate random smooth crossover equations of state with different speeds of sound that do not rely on specific parametrizations. Here, we explore a collection of experimental observable dependencies on the generated equations of state, which paves the groundwork for future Bayesian inference studies to use experimental measurements from relativistic heavy-ion collisions to constrain the nuclear matter equation of state.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2024

Application of C ( t )-Integral Solutions in Extending ASME BPVC Section XI Division 2 Code Case N-934 for Transient Creep Crack Growth

Creep crack growth is a phenomenon which arises in damaged metallic structures under combined primary and secondary loads in the creep regime. The High Temperature Flaw Evaluation Code Committee of the American Society of Mechanical Engineers Boiler and Pressure Vessel Code (BPVC) is evaluating methods in extending Code Case N-934 to capture transient creep crack growth. Here, this paper provides context and basic examples on the selected approach to transient creep crack growth methods based on the C(t)-integral. The basis for selected C(t)-integral solution as analytical method is established, including an overview of its derivation. Practical assessments of a crack growing under creep conditions in a realistic component are conducted to illustrate the analytical approach. Additional considerations in the application of the analytical methods and limitations are discussed.

36 MATERIALS SCIENCE↗
DOE OSTI2023

The Wiedemann-Franz law in doped Mott insulators without quasiparticles

Many metallic quantum materials display anomalous transport phenomena that defy a Fermi liquid description. In this report we use numerical methods to calculate thermal and charge transport in the doped Hubbard model and observe a crossover separating high- and low-temperature behaviors. Distinct from the behavior at high temperatures, the Lorenz number L becomes weakly doping dependent and less sensitive to parameters at low temperatures. At the lowest numerically accessible temperatures, L roughly approaches the Wiedemann-Franz constant L, even in a doped Mott insulator that lacks well-defined quasiparticles. Decomposing the energy current operator indicates a compensation between kinetic and potential contributions, which may help to clarify the interpretation of transport experiments beyond Boltzmann theory in strongly correlated metals.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗