Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “weak”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 739 records · Page 41

Using Kinetic Entropy to Understand Dissipation in Re-connection and Turbulence

This report summarizes results obtained at Space Science Institute (SSI) under a collaborative project funded by the NSF-DOE partnership in Basic Plasma Physics. The overall goal of the project was to perform a study of kinetic entropy as a diagnostic of dissipation in several archetypal models, such as magnetic reconnection and decaying plasma turbulence. The specific task of the SSI group was to perform collisionless and weakly collisional Particle-in-Cell (PIC) simulations modeling these systems. Overall, the project has demonstrated that, as expected, kinetic entropy carries an imprint of weakly collisional processes commonly thought to be associated with dissipation and thus provides an important diagnostic of dissipation. Specific entropy-related metrics have been proposed that could be used as quantitative measures of dissipation. These metrics have been implemented as diagnostics in PIC simulations and their utility, as well as relation to other, previously proposed, measures of dissipation have been demonstrated. Further, PIC simulations were used to investigate a general question of how energy is dissipated in magnetized weakly collisional turbulence in both non-relativistic and relativistic plasmas.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Use of Stable Mercury Isotopes to Assess Mercury and Methylmercury Transformation and Transport across Critical Interfaces from the Molecular to the Watershed Scale (Final Report)

This project titled “Use of Stable Mercury Isotopes to Assess Mercury and Methylmercury Transformation and Transport across Critical Interfaces from the Molecular to the Watershed Scale” represents a collaborative effort between the University of Michigan (Jason Demers, PI) and Oak Ridge National Laboratory (Scott Brooks, co-I). Much has been learned about mercury (Hg) cycling in stream ecosystems, and East Fork Poplar Creek (EFPC) in particular, through decades of previous research. Nevertheless, some of the most fundamental questions regarding the sources of bioavailable Hg and its transformation to toxic methylmercury (MeHg) have remained unanswered. These fundamental questions include: (1) what are the sources and biogeochemical processes that lead to the input of dissolved Hg to stream water across critical subsurface interfaces within stream ecosystems, and EFPC in particular? and (2) what are the sources and biogeochemical processes that control the production and fate of bioaccumulative MeHg within stream ecosystems, and in EFPC in particular? To address these fundamental questions, our project aimed to couple laboratory experiments and field observations, both utilizing natural abundance Hg stable isotope techniques, to identify the processes responsible for generating mobile, bioavailable dissolved Hg from recalcitrant legacy sources within critical subsurface zones (e.g., streambed hyporheic zone, riparian floodplain subsurface). We used the isotopic signature of this bioavailable dissolved Hg to track its mobilization across these critical interfaces in order to link diffuse subsurface sources of dissolved Hg with increases in surface water dissolved Hg flux measured at the watershed scale. Additionally, our research aimed to determine the isotopic composition of MeHg within these same critical subsurface zones. We directly assessed the isotopic composition of MeHg within biota in order to gain insight into which subsurface sources of inorganic Hg and toxic MeHg are available for bioaccumulation within the EFPC ecosystem. Net fluxes of dissolved Hg along the flow path of EFPC were shown to vary spatially and temporally. In the Upper EFPC, within the Y12 boundary, stream water flux of dissolved Hg consistently decreased between the outfall and the downstream boundary of Y12 (57% ± 29%, 1SD). Within the Upper EFPC, an assessment of Hg isotopic composition suggested that losses were strongly reaction-driven, although isotopic diagnostics did not conform to any known processes. Downstream of Y12, in the upper reach of the Lower EFPC, dissolved Hg fluxes tended to increase during the dormant season (net gain of 11-120%), and decrease during the growing season (net loss of 23% +/- 18%, 1SD). In the downstream-most reach of Lower EFPC, dissolved Hg fluxes increased by 12-108% in 9 out of 10 monthly assessments. Overall, diffuse fluxes from the non-Y12 watershed accounted for 34% (+/- 17%, 1SD) of all dissolved Hg exported during base flow. Within Lower EFPC, an assessment of Hg isotopic composition was consistent with the contribution of diffuse Hg inputs from high-concentration hotspots within riparian floodplains and streambed hyporheic pore water. To investigate remobilization of recalcitrant Hg from legacy sediment sources, we developed procedures that coupled isotopic analysis with sequential extractions of streambed sediment. We found that the proportion of weakly-bound Hg within EFPC streambed sediment was relatively small, but could still account for a large proportion of the annual flux of dissolved Hg from EFPC. These sequential extractions also showed that this weakly-bound Hg fraction could be replenished from the much larger fraction of recalcitrant Hg in sediment. The isotopic composition of these weakly-bound and remobilized recalcitrant Hg fractions within the sediment was consistent with high-concentration dissolved Hg hotspots within hyporheic pore water. Thus, this research provided novel evidence that legacy mercury sources within streambed sediment could provide an ongoing contribution of dissolved Hg to surface waters. Finally, we developed new methods for the direct determination of the MeHg isotopic composition of organisms, which allowed a more direct evaluation of inorganic Hg and MeHg sources accumulating in the food web. We found that fish and aquatic invertebrates in both EFPC and a regional background site obtained inorganic Hg and MeHg from multiple isotopically distinct sources, including sediment, suspended particulates, and periphyton. Photodemethylation was found to be an important reaction influencing MeHg dynamics at both sites. However, the balance of microbial methylation and demethylation processes differed between the two streams, with fractionation resulting from methylation and demethylation processes being relatively in balance within the regional background site, whereas microbial methylation appeared to be dominant over microbial demethylation within the EFPC ecosystem. Broadly, the application of Hg isotopic analysis in this study led to numerous novel insights regarding the biogeochemical cycling of Hg in stream ecosystems. This research project promoted the development of two new approaches, including the coupling of sequential extractions with Hg isotopic analysis to assess remobilization of recalcitrant Hg within sediments, and a new method for the isotopic analysis of MeHg isolated from environmental samples. Both of these efforts represent advances in capacity for the field of mercury isotopic analysis and environmental assessment. Overall, this study demonstrates that the application of Hg stable isotope techniques continues to provide new insights into the biogeochemical cycling of Hg in complex aquatic environments, both within the EFPC and beyond.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Improving Dark Energy Constraints Using Low-Redshift Large-Scale Structures

The primary goal of this project was to improve constraints on dark energy measurements by improving our ability to extract cosmological information from low redshift large-scale structures. PI Clowe's project's primary aim was to reduce the bias in measurements of the masses of clusters of galaxies to a level where the evolution of the cluster mass function can be used in the Vera Rubin Observatory's Legacy Survey of Space and Time Dark Energy Science Collaboration survey to improve the accuracy of the measurement of dark energy and other cosmological parameters. Co-PI Seo's project studied observational systematics affecting large-scale clustering of galaxies, which will be used to improve dark energy constraints from the Dark Energy Spectroscopic Instrument (DESI). The cluster lensing project employed a series of simulations and observations of clusters of galaxies to test numerous potential systematic errors in cluster mass measurements using weak gravitational lensing as the accuracy of current weak lensing measurements are more than order of magnitude worse than what is required to use clusters of galaxies for accurate determination of dark energy parameters. PI Clowe and group developed and analyzed simulations to test for, and correct biases introduced in, the weak lensing measurement process. Finally, PI Clowe and group developed a method of detecting clusters using galaxy overdensities and applied the method to the BLISS and DES surveys. The success of spectroscopic dark energy mission such as the extended Baryon Oscillation Spectroscopic Survey (eBOSS) and the Dark Energy Spectroscopic Instrument (DESI) will depend on a thorough understanding of various observational systematics in the target density fluctuations that would give rise to spurious, non-cosmological signals. PI Seo and group developed a deep learning, artificial neural network (ANN) technique that modeled and mitigated such effects, aimed at deriving more robust galaxy clustering signals not only for the baryon acoustic oscillation feature and redshift-space distortions but also for primordial non-Gaussianity constraint.

79 ASTRONOMY AND ASTROPHYSICS↗

Materials for Ultra‐Coherent, Mobile, Electron‐Spin Qubits

This research project has had the goal of gaining a better understanding of the physics of electrons bound to the surface of superfluid helium from both experimental and theoretical perspectives. It has particularly been aimed at two areas which had not been well studied: the relaxation and decoherence of the spin of the electrons on the helium surface and how the properties of underlying metallic layers affect the behavior of the electrons when the helium covering the metal is thin. This work is motivated in part by interest in using the spin of these electrons as a quantum bit, or qubit. Low levels of decoherence are advantageous for qubits, and moving the electrons, as one might do in a quantum processor, will be easiest if thin helium films can be employed. It had been suggested that spin decoherence should be very weak for electrons bound to superfluid He, but before this work there have been no quantitative studies of spin relaxation and decoherence. It is especially important to know how moving the electrons across the helium surface would affect their spin coherence. Calculations performed as part of this project show that the Rashba effective magnetic field, the mechanism which limits the spin coherence of mobile electrons in silicon-based devices (an actively pursued qubit technology), is exceptionally weak for electrons bound to helium. This project has identified other decoherence mechanisms which are stronger, but still weak compared to analogous silicon-based structures. Calculated spin coherence times for mobile electrons approach one day, as compared to microseconds in silicon. With coherence times of this magnitude, the spin qubit errors on helium will be completely dominated by errors in the quantum gates. In related work, the possibility of using an artificial spin-orbit interaction (a gradient magnetic field) for quantum operations on the electrons spins was considered. The calculations show that a moderate gradient field, small enough to be generated by a narrow superconducting wire, will enable high-fidelity quantum operations on electrons held in lithographically-defined quantum dots by driving them with a microwave electric field. The spin and motional coherence of the electrons is sufficient to allow high-fidelity 2-qubit quantum operations between electrons in neighboring quantum dots. As an outgrowth of experiments aiming to measure electron spin coherence it was discovered that very high densities of electrons can be stably supported on thin helium films coating ultra-smooth amorphous metallic layers. The measured densities are high enough that the electron system has almost certainly transitioned from an ordered array of electrons, known as a Wigner crystal (ordered by the electrons’ mutual repulsion), to a quantum fluid known as a Fermi liquid. This transition has been a subject of intense interest for over 40 years, since the electron Wigner crystal was first observed with electrons bound to superfluid helium, but it has never been unambiguously observed. Experiments are still underway in these new structures to definitively determine whether true quantum melting of the Wigner crystal has been demonstrated. This work has also catalyzed the development of a new approach for measuring the transport of electrons across very thin helium films, as will be needed for some of the quantum computing applications. The high electron density experiments as well as experiments with electrons bound in quantum dots have led to new techniques which may enable spin coherence measurements.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

The DECADE cosmic shear project IV: cosmological constraints from 107 million galaxies across 5,400 deg$^2$ of the sky

We present cosmological constraints from the Dark Energy Camera All Data Everywhere (DECADE) cosmic shear analysis. This work uses shape measurements for 107 million galaxies measured through Dark Energy Camera (DECam) imaging of $5,\!412$ deg$^2$ of sky that is outside the Dark Energy Survey (DES) footprint. We derive constraints on the cosmological parameters $S_8 = 0.791^{+0.027}_{-0.032}$ and $Ω_{\rm m} =0.269^{+0.034}_{-0.050}$ for the $Λ$CDM model, which are consistent with those from other weak lensing surveys and from the cosmic microwave background. We combine our results with cosmic shear results from DES Y3 at the likelihood level, since the two datasets span independent areas on the sky. The combined measurements, which cover $\approx\! 10,\!000$ deg$^2$, prefer $S_8 = 0.791 \pm 0.023$ and $Ω_{\rm m} = 0.277^{+0.034}_{-0.046}$ under the $Λ$CDM model. These results are the culmination of a series of rigorous studies that characterize and validate the DECADE dataset and the associated analysis methodologies (Anbajagane et. al 2025a,b,c). Overall, the DECADE project demonstrates that the cosmic shear analysis methods employed in Stage-III weak lensing surveys can provide robust cosmological constraints for fairly inhomogeneous datasets. This opens the possibility of using data that have been previously categorized as ``unusable'' for cosmic shear analyses, thereby increasing the statistical power of upcoming weak lensing surveys.

79 ASTRONOMY AND ASTROPHYSICS↗

Efficacy of the Cell Perturbation Method in Large-Eddy Simulations of Boundary Layer Flow over Complex Terrain

A challenge to simulating turbulent flow in multiscale atmospheric applications is the efficient generation of resolved turbulence motions over an area of interest. One approach is to apply small perturbations to flow variables near the inflow planes of turbulence-resolving simulation domains nested within larger mesoscale domains. While this approach has been examined in numerous idealized and simple terrain cases, its efficacy in complex terrain environments has not yet been fully explored. Here, we examine the benefits of the stochastic cell perturbation method (CPM) over real complex terrain using data from the 2017 Perdigão field campaign, conducted in an approximately 2-km wide valley situated between two nearly parallel ridges. Following a typical configuration for multiscale simulation using nested domains within the Weather Research and Forecasting (WRF) model to downscale from the mesoscale to a large-eddy simulation (LES), we apply the CPM on a domain with horizontal grid spacing of 150 m. At this resolution, spurious coherent structures are often observed under unstable atmospheric conditions with moderate mean wind speeds. Results from such an intermediate resolution grid are often nested down for finer, more detailed LES, where these spurious structures adversely affect the development of turbulence on the subsequent finer grid nest. We therefore examine the impacts of the CPM on the representation of turbulence within the nested LES domain under moderate mean flow conditions in three different stability regimes: weakly convective, strongly convective, and weakly stable. In addition, two different resolutions of the underlying terrain are used to explore the role of the complex topography itself in generating turbulent structures. We demonstrate that the CPM improves the representation of turbulence within the LES domain, relative to the use of high-resolution complex terrain alone. During the convective conditions, the CPM improves the rate at which smaller-scales of turbulence form, while also accelerating the attenuation of the spurious numerically generated roll structures near the inflow boundary. During stable conditions, the coarse mesh spacing of the intermediate LES domain used herein was insufficient to maintain resolved turbulence using CPM as the flow develops downstream, highlighting the need for yet higher resolution under even weakly stable conditions, and the importance of accurate representation of flow on intermediate LES grids.

17 WIND ENERGY↗

Northern Hemisphere Extratropical Cyclone Activity in the Twentieth Century Reanalysis Version 3 (20CRv3) and Its Relationship with Continental Extreme Temperatures

In this study, we detect and track extratropical cyclones using 6-hourly mean sea level pressure data taken from the Twentieth Century Reanalysis version 3 (20CRv3) over the period 1951–2015 and compare them with those in the Interim and fifth generation of ECMWF reanalyses over the period 1979–2018. Three indices were employed to characterize cyclone activity, including cyclone count, cyclone intensity, and a cyclone activity index (CAI) that combines the count and intensity. The results show that the cyclone indices in the three datasets have comparable annual climatologies and seasonal evolution over the northern extratropical land and ocean in recent decades. Based on the cyclone indices over the period 1951–2010 in 80 ensemble members of 20CRv3, cyclone count and intensity are negatively correlated in winter and tend to be positively and weakly correlated in summer. The interannual CAI variability is dominated by the cyclone count variability. Regional mean cyclone activity can be well represented using the ensemble average cyclone index. We then examined the linkage of the cyclone activity in 20CRv3 and observed cold and warm extremes over Eurasia and North America over the period 1951–2010. In winter, the principal components of interannual cold and warm extreme anomalies are more correlated with the regional mean cyclone count index over Eurasia, while they are more correlated with the cyclone intensity index over North America. The temperature anomalies associated with the regional and ensemble mean cyclone count index explain about 10% (20%) of interannual cold (warm) extreme variances averaged over Eurasia. The temperature anomalies associated with the mean cyclone intensity explain about 10% of interannual cold and warm extreme variances over North America. Large-scale atmospheric circulation anomalies in association with cyclone activity and the induced temperature advection drive temperature anomalies over Eurasia and North America. In summer, circulation and thermal advection anomalies associated with cyclone activity are weak over the two continents. Hence, that season’s relationship between cyclone activity and extreme temperature variability is weak.

20CRv3↗

Ferrotorryweiserite, Rh 5 Fe 10 S 16 , a New Mineral Species from the Sisim Placer Zone, Eastern Sayans, Russia, and the Torryweiserite–Ferrotorryweiserite Series

Ferrotorryweiserite, Rh 5 Fe 10 S 16 , occurs as small grains (≤20 µm) among droplet-like inclusions (up to 50 μm in diameter) of platinum-group minerals (PGM), in association with oberthürite or Rh-bearing pentlandite, laurite, and a Pt-Pd-Fe alloy (likely isoferroplatinum and Fe-Pd-enriched platinum), hosted by placer grains of Os-Ir alloy (≤0.5 mm) in the River Ko deposit. The latter is a part of the Sisim placer zone, which is likely derived from ultramafic units of the Lysanskiy layered complex, southern Krasnoyarskiy kray, Russia. The mineral is opaque, gray to brownish gray in reflected light, very weakly bireflectant, not pleochroic to weakly pleochroic (grayish to light brown tints), and weakly anisotropic. The calculated density is 5.93 g·cm –3 . Mean results (and ranges) of four WDS analyses are: Ir 18.68 (15.55–21.96), Rh 18.34 (16.32–20.32), Pt 0.64 (0.19–1.14), Ru 0.03 (0.00–0.13), Os 0.07 (0.02–0.17), Fe 14.14 (13.63–14.64), Ni 13.63 (12.58–14.66), Cu 4.97 (3.42–6.41), Co 0.09 (0.07–0.11), S 29.06 (28.48–29.44), and total 99.66 wt.%. They correspond to the following formula calculated for a total of 31 atoms per formula unit: (Rh 3.16 Ir 1.72 Pt 0.06 Ru 0.01 Os 0.01 ) Σ 4.95 (Fe 4.48 Ni 4.11 Cu 1.38 Co 0.03 ) Σ10.00 S 16.05 . The results of synchrotron micro-Laue diffraction studies indicate that ferrotorryweiserite is trigonal; its probable space group is $R\bar{3}m$ (#166) based on its Ni-analog, torryweiserite. The unit-cell parameters refined from 177 reflections are a = 7.069 (2) Å, c = 34.286 (11) Å, V = 1484 (1) Å 3 , and Z = 3. The c:a ratio is 4.8502. The strongest eight peaks in the X-ray diffraction pattern derived from results of micro-Laue diffraction study [d in Å(hkil)(I)] are 2.7950 ($20\bar{2}5$) (100); 5.7143 (0006) (60); 1.7671 ($22\bar{4}0$) (44.4); 3.0486 ($20\bar{2}1$) (39.4); 5.7650 ($10\bar{1}2$) (38.6); 2.5956 ($20\bar{2}7$) (37.8); 3.0058 ($11\bar{2}6$) (36.5); and 1.5029 ($4\bar{2}\bar{2}12$) (35.3). Ferrotorryweiserite and the associated PGM crystallized from microvolumes of residual melt at late stages of crystallization of grains of Os- and Ir-dominant alloys occurred in lode zones of chromitites of the Lysanskiy layered complex. In a particular case, the residual melt is disposed peripherally around a core containing a disequilibrium association of magnesian olivine (Fo 72.9–75.6 ) and albite (Ab 81.6–86.4 ), with the development of skeletal crystals of titaniferous augite: Wo 40.8–43.2 En 26.5–29.3 Fs 20.3–22.6 Aeg 6.9–9.5 (2.82–3.12 wt.% TiO 2 ). Ferrotorryweiserite represents the Fe-dominant analog of torryweiserite. We also report occurrences of ferrotorryweiserite in the Marathon deposit, Coldwell Complex, Ontario, Canada, and infer the existence of the torryweiserite–ferrotorryweiserite solid solution in other deposits and complexes.

58 GEOSCIENCES↗

Constraints on the IBEX Ribbon’s Origin from Its Evolution over a Solar Cycle

Abstract In 2009, the Interstellar Boundary Explorer (IBEX) discovered a narrow “ribbon” of energetic neutral atom emissions across the sky with properties correlated with the solar wind latitudinal structure and the interstellar magnetic field draped around the heliosphere. It is widely believed that the ribbon is formed from the escape of heliospheric ENAs into the local interstellar medium and their eventual return as secondary ENAs. However, there is no consensus on the rate of pitch angle scattering of these PUIs before they become secondary ENAs. We test two opposing limits of scattering rates (“weak” versus “strong”) by solving a time-dependent model of the ribbon that evolves with the solar cycle, and we compare them to IBEX observations over 2009–2019. First, we find that both models qualitatively reproduce the evolution of IBEX fluxes for most of the data set, with a few exceptions, although the strong (or “spatial retention”) scattering model greatly underestimates the observed fluxes. Regardless, time dependence of fluxes cannot distinguish these models. Second, the ribbon’s geometric properties, i.e., its center and radius, are significantly different between the models. The spatial retention model reproduces the observed ribbon centers as a function of energy and time slightly better than the weak scattering model, and the spatial retention model reproduces the observed ribbon radius over energy and time almost perfectly, whereas the weak scattering model compares poorly. Our analysis favors the spatial retention mechanism as the source of the IBEX ribbon, but it requires modification to increase the flux of ENAs observed at 1 au.

Zirnstein, E. J. (ORCID:0000000172400618)↗

Suppression of Composition g -modes in Chemically Equilibrating Warm Neutron Stars

We investigate the impact of chemical equilibration and the resulting bulk viscosity on nonradial oscillation modes of warm neutron stars at temperatures up to T ≈ 5 MeV, relevant for protoneutron stars and neutron star postmerger remnants. In this regime, the relaxation rate of weak interactions becomes comparable to the characteristic frequencies of composition g-modes in the core, resulting in resonant damping. To capture this effect, we introduce the dynamical sound speed, a complex, frequency-dependent generalization of the adiabatic sound speed that encodes both the restoring force and the dissipative effects of bulk compression. Using realistic weak reaction rates and three representative equations of state, we compute the complex frequencies of composition g-modes with finite-temperature profiles. We find that bulk viscous damping becomes increasingly significant with temperature and can completely suppress composition g-modes. In contrast, the f-mode remains largely unaffected by bulk viscosity due to its nearly divergence-free character. Our results highlight the sensitivity of g-mode behavior to thermal structure, weak reaction rates, and the equation of state, and establish the dynamical sound speed as a valuable descriptor characterizing oscillation properties in dissipative neutron star matter.

Neutron stars↗

Investigating the Effects of Bars on Star Formation and Nuclear Activity of Galaxies Using DESI Survey Data

We present a statistical analysis of the connections between galactic bars, star formation, and active galactic nucleus (AGN) activity using 33,201 disk galaxies (0.01 < z < 0.05) from Dark Energy Spectroscopic Instrument Data Release 1 (DESI DR1) cross-matched with Galaxy Zoo DESI. Based on morphological classifications, we identify 3508 strongly barred and 8335 weakly barred systems. We find that barred galaxies exhibit a clear bimodal distribution in color–mass space: weak bars are preferentially found in bluer, lower-mass disks, whereas strong bars are more common in massive, redder systems. Strongly barred galaxies are on average more massive and metal rich than unbarred systems. In addition, strong bars enhance central star formation rates (SFRs) in low-mass galaxies but reduce specific SFRs in massive systems, reflecting a dual role where bars initially trigger central star formation but eventually promote quenching by accelerating gas consumption. In terms of nuclear activity, barred galaxies display a higher incidence of AGN activity. The presence of a bar is also associated with an increased fraction of powerful AGN, with the highest proportions found in strongly barred systems. However, the correlations between AGN activity and detailed bar structural parameters are weak, suggesting that the link between bars and nuclear activity is indirect and regulated by multiple factors. Overall, our results support a scenario in which bars facilitate angular momentum transport and gas inflow, thereby driving central star formation and fueling supermassive black hole accretion while operating alongside other processes that shape galaxy evolution.

Liu, Jianfei [Chinese Academy of Sciences (CAS), B↗

Emergence of Microphysical Bulk Viscosity in Binary Neutron Star Postmerger Dynamics

Abstract In nuclear matter in isolated neutron stars, the flavor content (e.g., proton fraction) is subject to weak interactions, establishing flavor ( β -)equilibrium. However, there can be deviations from this equilibrium during the merger of two neutron stars. We study the resulting out-of-equilibrium dynamics during the collision by incorporating direct and modified Urca processes (in the neutrino-transparent regime) into general-relativistic hydrodynamics simulations with a simplified neutrino transport scheme. We demonstrate how weak-interaction-driven bulk viscosity in postmerger simulations can emerge and assess the bulk viscous dynamics of the resulting flow. We further place limits on the impact of the postmerger gravitational-wave strain. Our results show that weak-interaction-driven bulk viscosity can potentially lead to a phase shift of the postmerger gravitational-wave spectrum, although the effect is currently on the same level as the numerical errors of our simulation.

Astronomy & Astrophysics↗

Disorder Enhanced Thermalization in Interacting Many-Particle System

We introduce an extension of the non-equilibrium dynamical mean field theory to incorporate the effects of static random disorder in the dynamics of a many-particle system by integrating out different disorder configurations resulting in an effective time-dependent density-density interaction. We use this method to study the non-equilibrium transient dynamics of a system described by the Fermi Anderson-Hubbard model following an interaction and disorder quench. The method recovers the solution of the disorder-free case for which the system exhibits qualitatively distinct dynamical behaviors in the weak-coupling (prethermalization) and strong-coupling regimes (collapse-and-revival oscillations). However, we find that weak random disorder promotes thermalization. In the weak coupling regime, the jump in the quasiparticle weight in the prethermal regime is suppressed by random disorder while in the strong-coupling regime, random disorder reduces the amplitude of the quasiparticle weight oscillations. These results highlight the importance of disorder in the dynamics of realistic many-particle systems.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

The Beam Dump eXperiment

Hadronic matter makes about 14% of the known universe. The remaining 86% is Dark Matter (DM). Since it does not interact with the ordinary matter via electromagnetic force, DM is not visible and, to date, it escaped detection. The search for Dark Matter (DM) is one of the hottest topic in modern physics. Despite the increasing number of astrophysical and cosmological observations proving the existence, so far no particle physics experiment has detected DM yet. Up to now, most of the experimental efforts have been focused on the so called WIMP (Weakly Interacting Massive Particle) paradigm, which predicts heavy DM (10 GeV-10 TeV mass range) interacting with Standard Model (SM) particles via the weak force mediators (W or Z bosons). More recently, due to the lack of clear evidence of WIMPs, other models of DM gained the interest of the physics community. These models consider Light DM particles (LDM), in MeV-GeV mass range. Among LDM theories, the Dark Photon theory predicts the existence of a Dark Sector interacting with SM particles via a new massive vector boson (Dark Photon, Heavy Photon or A0), mediator of a new force. This scenario, despite being theoretically well motivated, is remarkably experimentally unexplored. The Beam Dump eXperiment (BDX), is an approved experiment at Jefferson Lab (JLab), aiming to discover the DM predicted witihn the Dark Photon theory. The experiment uses the CEBAF (Continuous Electron Beam Accelerator Facility) 11 GeV electron beam, impinging on the JLab Hall-A beam-dump, to produce a beam of DM particles, detected by a ~ 1 m3 detector made of thallium doped cesium iodide (CsI(Tl)) crystals located ~ 20 m downstream. In order to achieve excellent background rejection, the experimental setup includes active vetos and passive shielding surrounding CsI(Tl) crystals. Given the weakness of the DM-SM interaction, the scattering of a DM particle in the BDX detector is a rare event. Therefore, the characterization of the expected background is a critical aspect of the experiment. Both cosmogenic and penetrating SM particles produced by the beam interaction in the dump contribute to the background of the experiment. While the cosmogenic contribution can be measured during the experiment when the beam is off, beam-related background can only be estimated via Monte Carlo (MC) simulations. Therefore, a careful assessment of possible systematics introduced by the MC is needed. The beam-correlated background characterization was made by measuring the muon flux produced by the interaction of the CEBAF beam with Hall-A dump in a dedicated experimental campaign in spring 2018 [1]. The comparison to the ?ux predicted by MC allowed us to validate the BDX simulation framework. The reach of BDX, i.e. the region that the experiment can probe in the LDM theory parameter space, depends critically on the background rejection capability and signal detection effciency. For this reason, the detector setup was fine-tuned through a dedicated study. The response to LDM and background events was evaluated for different setups and selection cuts. As a result of this procedure, the configuration resulting in the best sensitivity was selected [2]. The reach calculation was performed taking into account the different LDM production mechanisms, including the contribution of secondary particles produced in the beam-dump. In particular, the effect of the secondary positrons annihilation was found to be extremely significant. In the majority of the sensitivity studies, this contribution is neglected, but recent results [3] [4] demonstrated that this process significantly enhances the sensitivity of lepton beam-dump experiments. Currently, the BDX collaboration is focused on the deployment and operation of a small detector, called BDX-MINI, built to perform a preliminary physics measurement searching for LDM at JLab. This test will pave the way to the realization of the full BDX experiment. The measurement is currently ongoing but results are expected by the end of this year. During my PhD I was involved in all aspects of the BDX experiment: design, simulation, prototyping and data analysis. The main results of my work are reported in this thesis. This manuscript is organized as follows: the first Chapter provides an introduction to the theory of LDM, with particular attention to the Dark Photon paradigm; the second Chapter illustrates the BDX experimental setup, the LDM production and detection mechanisms and the expected backgrounds; Chapter 3 and 4 describe, respectively, the BDX-HODO measurement, with a detailed description of the simulations, and the BDX experimental setup and analysis cuts optimization. Chapter 5 reports about BDXMINI detector characterization, calibration and sensitivity estimate. Finally, Chapter 6 describes in detail the calculation of the secondary positron annihilation contribution to the sensitivity of BDX and other electron-beam thick-target experiment.

Marsicano, Luca↗

Building an Efficient Cluster Cosmology Software Package for Modeling Cluster Counts and Lensing

We introduce a software suite developed for galaxy cluster cosmological analysis with the Dark Energy Survey Data. Cosmological analyses based on galaxy cluster number counts and weak-lensing measurements need efficient software infrastructure to explore an increasingly large parameter space, and account for various cosmological and astrophysical effects. Our software package is designed to model the cluster observables in a wide-field optical survey, including galaxy cluster counts, their averaged weak-lensing masses, or the cluster's averaged weak-lensing radial signals. To ensure maximum efficiency, this software package is developed in C++ in the CosmoSIS software framework, making use of the CUBA integration library. We also implement a testing and validation scheme to ensure the quality of the package. We demonstrate the effectiveness of this development by applying the software to the Dark Energy Survey Year 1 galaxy cluster cosmological data sets, and acquired cosmological constraints that are consistent with the fiducial Dark Energy Survey analysis.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Bend inducible self-folding Origami flexures and microsystems

The present disclosure relates to a spatio-temporal stimulus responsive foldable structure. The structure may have a substrate having at least a region formed to provide engineered weakness to help facilitate bending or folding of the substrate about the region of engineered weakness. The substrate is formed to have a first shape. A stimulus responsive polymer (SRP) flexure is disposed at the region of engineered weakness. The SRP flexure is responsive to a predetermined stimulus actuation signal to bend or fold in response to exposure to the stimulus actuation signal, to cause the substrate to assume a second shape different from the first shape.

Kampasi, Komal↗

Investigating SU(3) with Nf=8 fundamental fermions at strong renormalized coupling

Lattice simulations have observed a novel strong coupling symmetric mass generation (SMG) phase for the SU(3) gauge system with $N_f=8$ fundamental fermions (represented by two sets of staggered fields) at very large renormalized coupling ($g^2_{GF} \gtrsim 25$). The results of Phys.Rev.D 106 (2022) 014513 suggest that the SMG phase is separated from the weak coupling, conformal phase by a continuous phase transition, implying that the SMG phase exists in the continuum limit. To scrutinize these findings, we are generating a set of large volume zero temperature ensembles using nHYP improved staggered fermions with additional Pauli-Villars fields to tame gauge field fluctuations. We consider the low-lying meson spectrum and verify the existence of the SMG phase. Based on a finite size scaling analysis we predict that the phase transition between the strong and weak coupling phases is likely governed by a merged fixed point that is ultraviolet in the strong coupling but infrared in the weak coupling side. This finding suggests that the SU(3) 8-flavor system sits at the opening of the conformal window

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Validation of the DESI-DR1 3x2-pt analysis: scale cut and shear ratio tests

Combined survey analyses of galaxy clustering and weak gravitational lensing (3x2-pt studies) will allow new and accurate tests of the standard cosmological model. However, careful validation is necessary to ensure that these cosmological constraints are not biased by uncertainties associated with the modelling of astrophysical or systematic effects. In this study we validate the combined 3x2-pt analysis of the Dark Energy Spectroscopic Instrument Data Release 1 (DESI-DR1) spectroscopic galaxy clustering and overlapping weak lensing datasets from the Kilo-Degree Survey (KiDS), the Dark Energy Survey (DES), and the Hyper-Suprime-Cam Survey (HSC). By propagating the modelling uncertainties associated with the non-linear matter power spectrum, non-linear galaxy bias and baryon feedback, we design scale cuts to ensure that measurements of the matter density and the amplitude of the matter power spectrum are biased by less than 30% of the statistical error. We also test the internal consistency of the data and weak lensing systematics by performing new measurements of the lensing shear ratio. We demonstrate that the DESI-DR1 shear ratios can be successfully fit by the same model used to describe cosmic shear correlations, and analyse the additional information that can be extracted about the source redshift distributions and intrinsic alignment parameters. This study serves as crucial preparation for the upcoming cosmological parameter analysis of these datasets.

Emas, N. [Swinburne U., Ctr. Astrophys. Supercompu↗