Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “linearity”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 739 records · Page 41

Wind tunnel wall effects in a linear oscillating cascade

Experiments in a linear oscillating cascade reveal that the wind tunnel walls enclosing the airfoils have, in some cases, a detrimental effect on the oscillating cascade aerodynamics. In a subsonic flow field, biconvex airfoils are driven simultaneously in harmonic, torsion-mode oscillations for a range of interblade phase angle values. It is found that the cascade dynamic periodicity - the airfoil to airfoil variation in unsteady surface pressure - is good for some values of interblade phase angle but poor for others. Correlation of the unsteady pressure data with oscillating flat plate cascade predictions is generally good for conditions where the periodicity is good and poor where the periodicity is poor. Calculations based upon linearized unsteady aerodynamic theory indicate that pressure waves reflected from the wind tunnel walls are responsible for the cases where there is poor periodicity and poor correlation with the predictions.

Buffum, Daniel H.↗

Long-term prediction test procedure for most ICs, based on linear response theory

Experimentally, thermal annealing is known to be a factor which enables a number of different integrated circuits (IC's) to recover their operating characteristics after suffering radiation damage in the space radiation environment; thus, decreasing and limiting long term cumulative total-dose effects. This annealing is also known to be accelerated at elevated temperatures both during and after irradiation. Linear response theory (LRT) was applied, and a linear response function (LRF) to predict the radiation/annealing response of sensitive parameters of IC's for long term (several months or years) exposure to the space radiation environment were constructed. Compressing the annealing process from several years in orbit to just a few hours or days in the laboratory is achieved by subjecting the IC to elevated temperatures or by increasing the typical spaceflight dose rate by several orders of magnitude for simultaneous radiation/annealing only. The accomplishments are as follows: (1) the test procedure to make predictions of the radiation response was developed; (2) the calculation of the shift in the threshold potential due to the charge distribution in the oxide was written; (3) electron tunneling processes from the bulk Si to the oxide region in an MOS IC were estimated; (4) in order to connect the experimental annealing data to the theoretical model, constants of the model of the basic annealing process were established; (5) experimental data obtained at elevated temperatures were analyzed; (6) time compression and reliability of predictions for the long term region were shown; (7) a method to compress test time and to make predictions of response for the nonlinear region was proposed; and (8) nonlinearity of the LRF with respect to log(t) was calculated theoretically from a model.

Litovchenko, V.↗

Formulation and validation of high-order linearized models of helicopter flight mechanics

A high-order linearized model of helicopter flight dynamics is extracted from a nonlinear time domain simulation. The model has 29 states that describe the fuselage rigid body degrees of freedom, the flap and lag dynamics in a nonrotating coordinate system, the inflow dynamics, the delayed entry of the horizontal tail into the main rotor wake, and, approximately, the blade torsion dynamics. The nonlinear simulation is obtained by extensively modifying the GENHEL computer program. The results indicate that the agreement between the linearized and the nonlinear model is good for small perturbations, and deteriorates for large amplitude maneuvers.

Kim, Frederick D.↗

The linear stability of plane stagnation-point flow against general disturbances

The linear-stability theory of plane stagnation-point flow against an infinite flat plate is re-examined. Disturbances are generalized from those of Goertler type to include other types of variations along the plate. It is shown that Hiemenz flow is linearly stable and that the Goertler-type modes are those that decay slowest. This work then rationalizes the use of such self-similar disturbances on Hiemenz flow and shows how questions of disturbance structure can be approached on other self-similar flows.

Brattkus, K.↗

Non-linear dynamics of a geared rotor-bearing system with multiple clearances

The nonlinear frequency response characteristics of a geared rotor-bearing system are examined. A three-DOF dynamic model is developed which includes nonlinearities associated with radial clearances in the radial rolling element bearings and backlash between a spur gear pair; linear time-invariant gear meshing stiffness is assumed. The corresponding linear system problem is also solved, and predicted natural frequencies and modes match with finite element method results. The applicability of both analytical and numerical solution techniques to the multi-DOF nonlinear problem is investigated. Satisfactory agreement is found between the theory presented here and the available experimental data. Nonlinear modal interactions and differences between internal static transmission error excitation and external torque excitation are discussed. In addition, parametric studies are performed to understand the effect of system parameters such as bearing stiffness to gear mesh stiffness ratio, alternating to mean force ratio and radial bearing preload to mean force ratio on the nonlinear dynamic behavior.

Kahraman, A.↗

Optimization of linear, controlled structures

An approach to the integrated design of linear controlled structures, which is being investigated as part of NASA's controlled structures interaction (CSI) methodology development program, is presented. The approach is integrated in the sense that the structure and its controller are simultaneously designed. The design methodology uses constrained nonlinear optimization procedures based on analytically obtained gradients of the structural responses. Design of the controller is based on the so-called Q-parameterization theory, which parameterizes all closed-loop input/output maps achievable with stabiizing linear controllers. Very general objective and constraint functions are possible, and structural shape can be included in the design variables. This method has been partially implemented and demonstrated; early findings are reported.

Hunziker, K. Scott↗

Linear quadratic servo control of a reusable rocket engine

The paper deals with the development of a design method for a servo component in the frequency domain using singular values and its application to a reusable rocket engine. A general methodology used to design a class of linear multivariable controllers for intelligent control systems is presented. Focus is placed on performance and robustness characteristics, and an estimator design performed in the framework of the Kalman-filter formalism with emphasis on using a sensor set different from the commanded values is discussed. It is noted that loop transfer recovery modifies the nominal plant noise intensities in order to obtain the desired degree of robustness to uncertainty reflected at the plant input. Simulation results demonstrating the performance of the linear design on a nonlinear engine model over all power levels during mainstage operation are discussed.

Musgrave, Jeffrey L.↗

Linear and circular digital spectral analysis of serial data

Two methods of digital spectral analysis of unevenly sampled data are developed and illustrated here. One method uses a linear function of time (or space), the other uses circular functions. The circular method turns out to be essentially equivalent to a least-squares sine-wave analysis. The linear, anharmonic method uses only the field of real numbers and elementary algebraic operations, and hence it can be made computationally very fast and accurate. Both methods are very general, properly handling all kinds of time series ranging from simple series consisting only of the times of events to complicated series consisting of pulses with long duty cycles. The two methods are here applied to the analysis of annual mean relative sunspot numbers.

Stothers, Richard B.↗

The linear stability of three-dimensional boundary-layers over axisymmetric bodies at incidence

The linear stability of the fully three-dimensional boundary layer formed over a 6:1 prolate spheroid at 10 deg incidence is investigated using a modified version of the linear stability code COSAL. For this case, both Tollmien-Schlichting and cross flow disturbances are relevant in the transition process. The predicted location of the onset of transition using the e exp N method compares favorably with experimental results of Meier and Kreplin (1980). Using a value of N = 10, the predicted location is located approximately 10 percent upstream of the experimentally determined location. Results also indicate that the direction of disturbance propagation is dependent upon the type of disturbance, and hence the dimensional frequency.

Spall, R. E.↗

The wavelength dependence of broadband linear polarization in cool stars

A model is developed to investigate the effect of wavelength dependence of magnetically generated broadband linear polarization (BLP) in late-type stars as a function of line blanketing, observation filters, and other variables. Linear polarization is assumed to be a single 'average' line and the line opacity, magnetic area filling factor, and continuum intensity are incorporated to establish an equation for disk-generated BLP. The method is investigated by computing special models for the flare star BY Dra and the sun which are compared to previous calculations. The model is shown to agree with the calculations of BLP, and the magnetic BLP dependent on wavelengths varies significantly from the simple power law dependences on wavelength. The model sets lower limits to the area occupied by magnetic regions, and an upper limit to the expected BLP also results from the formulation.

Saar, Steven H.↗

Observer-based robust-H-infinity control laws for uncertain linear systems

Based on the algebraic Riccati equation approach, this paper presents a simple and flexible method for designing observer-based robust-H-infinity control laws for linear systems with structured parameter uncertainty. The observer-based robust-H-infinity output-feedback control law, obtained by solving three augmented algebraic Riccati equations, provides both robust stability and disturbance attenuation with H-infinity-norm bound for the closed-loop uncertain linear system. Several tuning parameters are embedded into the augmented algebraic Riccati equations so that flexibility in finding the symmetric positive-definite solutions (and hence, the robust-H-infinity control laws) is significantly increased. A benchmark problem associated with a mass-spring system, which approximates the dynamics of a flexible structure, is used to illustrate the design methodologies, and simulation results are presented.

Shieh, Leang S.↗

Effect of ohmic, mass-transfer, and kinetic resistances on linear-sweep voltammetry in a cylindrical-pore electrode

A means is presented to account for the effect of ohmic, mass-transfer, and kinetic resistances on linear-sweep voltammograms by modeling a pore in a porous matrix as a cylindrical-pore electrode, and solving the mass and charge conservation equations in the context of this geometry for the simply redox reaction O + ne(-) yield R where both O and R are soluble species. Both analytical and numerical techniques are used to solve the governing equations. The calculated peak currents and potentials are correlated by empirical formulas to the measurable parameters: sweep rate, concentration of the redox species, diffusion coefficient, conductivity of the electrolyte, and pore dimensions. Using the correlations, a methodology is established for determining if the redox reaction kinetics are irreversible or reversible (Nernstian). If the reaction is irreversible, it is shown how the standard rate constant and the transfer coefficient may be extracted from linear-sweep voltammetry data, or, if the reaction is reversible, how the number of electrons transferred may be deduced.

Weidner, John W.↗

Linear stability of free planetary waves in the presence of radiative-photochemical feedbacks

The diabatic effects of Newtonian cooling and ozone-dynamics interaction on the linear stability of free planetary waves in the atmosphere have been studied using a simple beta-plane model. The model couples radiative transfer, ozone advection, and ozone photochemistry with the quasi-geostrophic dynamical circulation. An analytical expression is derived which demonstrates the following: (1) the influence of meridional ozone advection on wave growth or decay depends on the wave and basic state vertical structures; and (2) photochemically accelerated cooling, which predominates in the upper stratosphere, augments the Newtonian cooling rate and is stabilizing. Attention is also given to the 1D linear stability problem which is numerically solved for a Charney basic state and for zonal mean basic states. It is shown that ozone heating generated by ozone-dynamics interaction in the stratosphere can reduce (enhance) the damping rates due to Newtonian cooling by as much as 50 percent for planetary waves of large vertical scale and maximum amplitude in the stratosphere.

Nathan, Terrence R.↗

Atomic Clock Based On Linear Ion Trap

Highly stable atomic clock based on excitation and measurement of hyperfine transition in 199Hg+ ions confined in linear quadrupole trap by radio-frequency and static electric fields. Configuration increases stability of clock by enabling use of enough ions to obtain adequate signal while reducing non-thermal component of motion of ions in trapping field, reducing second-order Doppler shift of hyperfine transition. Features described in NPO-17758 "Linear Ion Trap for Atomic Clock." Frequency standard based on hyperfine transition described in NPO-17456, "Trapped-Mercury-Ion Frequency Standard."

Prestage, John D.↗

Linear quadratic servo control of a reusable rocket engine

A design method for a servo compensator is developed in the frequency domain using singular values. The method is applied to a reusable rocket engine. An intelligent control system for reusable rocket engines was proposed which includes a diagnostic system, a control system, and an intelligent coordinator which determines engine control strategies based on the identified failure modes. The method provides a means of generating various linear multivariable controllers capable of meeting performance and robustness specifications and accommodating failure modes identified by the diagnostic system. Command following with set point control is necessary for engine operation. A Kalman filter reconstructs the state while loop transfer recovery recovers the required degree of robustness while maintaining satisfactory rejection of sensor noise from the command error. The approach is applied to the design of a controller for a rocket engine satisfying performance constraints in the frequency domain. Simulation results demonstrate the performance of the linear design on a nonlinear engine model over all power levels during mainstage operation.

Musgrave, Jeffrey L.↗

Modal interaction in linear dynamic systems near degenerate modes

In various problems in structural dynamics, the eigenvalues of a linear system depend on a characteristic parameter of the system. Under certain conditions, two eigenvalues of the system approach each other as the characteristic parameter is varied, leading to modal interaction. In a system with conservative coupling, the two eigenvalues eventually repel each other, leading to the curve veering effect. In a system with nonconservative coupling, the eigenvalues continue to attract each other, eventually colliding, leading to eigenvalue degeneracy. Modal interaction is studied in linear systems with conservative and nonconservative coupling using singularity theory, sometimes known as catastrophe theory. The main result is this: eigenvalue degeneracy is a cause of instability; in systems with conservative coupling, it induces only geometric instability, whereas in systems with nonconservative coupling, eigenvalue degeneracy induces both geometric and elastic instability. Illustrative examples of mechanical systems are given.

Afolabi, D.↗

MMIC linear-phase and digital modulators for deep space spacecraft X-band transponder applications

The design concepts, analyses, and development of GaAs monolithic microwave integrated circuit (MMIC) linear-phase and digital modulators for the next generation of space-borne communications systems are summarized. The design approach uses a compact lumped element quadrature hybrid and Metal Semiconductor Field Effect Transistors (MESFET)-varactors to provide low loss and well-controlled phase performance for deep space transponder (DST) applications. The measured results of the MESFET-diode show a capacitance range of 2:1 under reverse bias, and a Q of 38 at 10 GHz. Three cascaded sections of hybrid-coupled reflection phase shifters were modeled and simulations performed to provide an X-band (8415 +/- 50 MHz) DST phase modulator with +/- 2.5 radians of peak phase deviation. The modulator will accommodate downlink signal modulation with composite telemetry and ranging data, with a deviation linearity tolerance of +/- 8 percent and insertion loss of less than 8 +/- 0.5 dB. The MMIC digital modulator is designed to provide greater than 10 Mb/s of bi-phase modulation at X-band.

Mysoor, Narayan R.↗

Physical lumping methods for developing linear reduced models for high speed propulsion systems

In gasdynamic systems, information travels in one direction for supersonic flow and in both directions for subsonic flow. A shock occurs at the transition from supersonic to subsonic flow. Thus, to simulate these systems, any simulation method implemented for the quasi-one-dimensional Euler equations must have the ability to capture the shock. In this paper, a technique combining both backward and central differencing is presented. The equations are subsequently linearized about an operating point and formulated into a linear state space model. After proper implementation of the boundary conditions, the model order is reduced from 123 to less than 10 using the Schur method of balancing. Simulations comparing frequency and step response of the reduced order model and the original system models are presented.

Immel, S. M.↗