Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Study center”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 739 records · Page 41
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Evidence for four-top quark production in proton-proton collisions at s = 13 TeV

The production of four top quarks ($\mathrm{t\bar{t}t\bar{t}}$) is studied with LHC proton-proton collision data samples collected by the CMS experiment at a center-of-mass energy of 13 TeV, and corresponding to integrated luminosities of up to 138 fb$^{-1}$. Events that have no leptons (all-hadronic), one lepton, or two opposite-sign leptons (where lepton refers only to prompt electrons or prompt muons) are considered. This is the first $\mathrm{t\bar{t}t\bar{t}}$ measurement that includes the all-hadronic final state. The observed significance of the $\mathrm{t\bar{t}t\bar{t}}$ signal in these final states of 3.9 standard deviations (1.5 expected) provides evidence for $\mathrm{t\bar{t}t\bar{t}}$ production, with a measured cross section of 36 $^{+12}_{-11}$ fb. Combined with earlier CMS results in other final states, the signal significance is 4.0 standard deviations (3.2 expected). The combination returns an observed cross section of 17 $\pm$ 4 (stat) $\pm$ 3 (syst) fb, which is consistent with the standard model prediction.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2025

Observation of double parton scattering in same-sign W boson pair production in pp collisions at $\sqrt{s} = 13$ TeV with the ATLAS detector

This letter reports the measurement of double parton scattering in same-sign W boson pair production with the ATLAS detector. The data set used corresponds to an integrated luminosity of 140 fb -1 of proton–proton collisions at a center-of-mass energy of 13 TeV, collected during Run 2 of the Large Hadron Collider. The study is performed in final states including two same-charge leptons, electron or muon, missing transverse momentum, and up to one jet. An excess of events is observed over the expected background contributions with a significance of 8.8 standard deviations. The measured fiducial cross section times leptonic branching fraction is 4.59 ± 0.64 fb. The measurement corresponds to a double parton scattering effective cross section of 10.6 ± 1.8 mb.

DPS↗
DOE OSTI2020

Pore-Edge Tailoring of Single-Atom Iron–Nitrogen Sites on Graphene for Enhanced CO 2 Reduction

Hosting atomically dispersed nitrogen-coordinated iron sites (Fe-N 4 ) on graphene offers unique opportunities for driving electrochemical CO 2 reduction reaction (CO 2 RR) to CO. However, the strong adsorption of *CO on the Fe-N 4 site embedded in intact graphene limits current density due to slow CO desorption process. Herein, we report how the manipulation of pore edges on graphene alters the local electronic structure of isolated Fe-N 4 sites and improves their intrinsic reactivity for prompting CO generation. We demonstrate that constructing holes on graphene basal plane to support Fe-N 4 can significantly enhance its CO 2 RR compared to the pore-deficient graphene-supported counterpart, exhibiting a CO Faradaic efficiency of 94% and a turnover frequency of 1630 h -1 at 0.58 V vs RHE. Mechanistic studies reveal that the incorporation of pore edges results in the downshifting of the d-band center of Fe sites, which weakens the strength of the Fe-C bond when the *CO intermediate adsorbs on edge-hosted Fe-N 4 , thus boosting the CO desorption and evolution rates. These findings suggest that engineering local support structure renders a way to design high-performance single-atom catalysts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Mesolytic cleavage of homobenzylic ethers for programmable end-of-life function in redoxmers

Irreparable chemical damage to redox-active monomers, oligomers, and polymers (i.e. redoxmers) limits the lifetime of energy storage devices (e.g. redox flow batteries) by causing electrode and membrane fouling, as well as irreversible capacity loss. To predictably restore device and materials performance, it is desirable to add programmed destruction capabilities into these damage-prone materials. Here, we report the use of triggerable retrograde reactions to achieve programmable end-of-life function in redoxmers. Retrograde reactions are intended to break up damaged redoxmer materials into more soluble small-molecule constituents to prevent irreparably fouling battery interfaces. We investigated the redox-triggered mesolytic cleavage of homobenzylic ethers (HBEs) for this purpose. Combining experimental methods with simulations, we probed the influence of ring substituents on the programmable bond-scission behavior of HBEs. Variation of para-substituents on the HBEs allowed us to modify the oxidation potential, degradation pathway, and electrochemical mechanisms of the generated products. Given its ideal oxidation potential, we selected the para-methoxy-based HBE as the cleavage scaffold and integrated it with dialkoxybenzene, TEMPO, viologen, and para-nitrobenzene redox centers for compatibility, bulk deconstruction, and electrode defouling tests. Upon applying a high oxidation potential, the redox-active pendant is cleaved from the backbone via HBE bonds; of the four redox centers tested, three of them remained fully redox active. Viologen-appended redox active polymers with HBE linkers were cleaved to fully separate the redox centers from the backbone. Polymer-filmed electrodes were partially restored following HBE oxidation defouling. Here these studies highlight the co-design of new materials functions for developing sustainable energy storage materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Proton transfer kinetics of transition metal hydride complexes and implications for fuel-forming reactions

Proton transfer reactions involving transition metal hydride complexes are prevalent in a number of catalytic fuel-forming reactions, where the proton transfer kinetics to or from the metal center can have significant impacts on the efficiency, selectivity, and stability associated with the catalytic cycle. Here, this review correlates the often slow proton transfer rate constants of transition metal hydride complexes to their electronic and structural descriptors and provides perspective on how to exploit these parameters to control proton transfer kinetics to and from the metal center. A toolbox of techniques for experimental determination of proton transfer rate constants is discussed, and case studies where proton transfer rate constant determination informs fuel-forming reactions are highlighted. Opportunities for extending proton transfer kinetic measurements to additional systems are presented, and the importance of synergizing the thermodynamics and kinetics of proton transfer involving transition metal hydride complexes is emphasized.

08 HYDROGEN↗
DOE OSTI2026

The X17 with Chiral Couplings

In recent years, the ATOMKI collaboration has performed a series of measurements of excited nuclei, observing a resonant excess of electron-positron pairs at large opening angles compared to the Standard Model prediction. The excess has been hypothesized to be due to the production of a new spin-1 or spin-0 particle, X17, with a mass of about 17 MeV. Recently, the PADME experiment has reported an excess in the $e^+e^-$ cross section at center-of-mass energies near 17 MeV, perhaps further hinting at the existence of a new state. Studies of the spin-1 case have hitherto focused on either vector {\em or} axial-vector couplings to quarks and leptons, whereas UV theories more naturally produce {\em both} vector and axial-vector (\textit{i.e.} chiral) couplings, analogous to the Standard Model weak interactions. We consider the ATOMKI anomalies in the context of an $X$ with chiral couplings to quarks and explore the parameter space that can explain the ATOMKI anomalies, contrasting them with experimental constraints. We find that it is possible to accommodate the reported ATOMKI signals. However, the $99\%$ CL region is in tension with null results from searches for atomic parity violation and direct searches for new low mass physics coupled to electrons. This tension is found to be driven by the magnitude of the reported excess in the transition of $^{12}{\rm C}(17.23)$, which drives the best-fit region towards excluded couplings.

Fieg, Max H. [UC, Irvine; UC, Irvine (main); Fermi↗
DOE OSTI2022

Electronic and magnetic properties of the topological semimetal SmMg 2 Bi 2

Dirac semimetals show nontrivial physical properties and can host exotic quantum states like Weyl semimetals and topological insulators under suitable external conditions. Here, by combining angle-resolved photoemission spectroscopy measurements (ARPES) and first-principle calculations, we demonstrate that the Zintl-phase compound SmMg 2 Bi 2 is in close proximity to a topological Dirac semimetallic state. ARPES results show a Dirac-like band crossing at the zone center near the Fermi level (E F ), which is further confirmed by first-principle calculations. Theoretical studies also reveal that SmMg 2 Bi 2 belongs to a Z 2 topological class and hosts spin-polarized states around the E F . Zintl's theory predicts that the valence state of Sm in this material should be Sm 2+ , however, we detect many Sm-4f multiplet states (flat-bands) whose energy positions and relative intensities suggest the presence of both dominant Sm 2+ and minor Sm 3+ . The small concentration (2.5%) of Sm 3+ in the bulk of a crystal is inferred to arise from Sm vacancies in the crystal. It is also evident that these flat bands and other dispersive states are strongly hybridized when they cross each other. Due to the presence of Sm 3+ ions, the temperature dependence of the magnetic susceptibility χ (T) shows a Curie-Weiss-like contribution in the low-temperature region, in addition to the Van Vleck-like behavior expected for the Sm 2+ ions. The present study will help to better understand the electronic structure, magnetism, and transport properties of related materials.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2023

Observation of e + e – → ω χ b J ( 1 P ) and Search for X b → ω Υ ( 1 S ) at s near 10.75 GeV

We study the processes $e^{+}e^{–} → ωχ_{bJ}$(1P) (J=0, 1, or 2) using samples at center-of-mass energies $\sqrt{s}$ = 10.701, 10.745, and 10.805 GeV, corresponding to 1.6, 9.8, and 4.7 fb –1 of integrated luminosity, respectively. These data were collected with the Belle II detector during special operations of the SuperKEKB collider above the Υ(4S) resonance. We report the first observation of $ωχ_{bJ}$(1P) signals at $\sqrt{s}$ = 10.745 GeV. By combining Belle II data with Belle results at $\sqrt{s}$ = 10.867 GeV, we find energy dependencies of the Born cross sections for $e^{+}e^{–} → ωχ_{b1,b2}$(1P) to be consistent with the shape of the Υ(10753) state. These data indicate that the internal structures of the Υ(10753) and Υ(10860) states may differ. Including data at $\sqrt{s}$ = 10.653 GeV, we also search for the bottomonium equivalent of the X(3872) state decaying into ωΥ(1S). No significant signal is observed for masses between 10.45 and 10.65 GeV/c 2 .

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2023

Seamless Transition of Critical Infrastructures using Droop Controlled Grid-forming Inverters

Seamless recovery of power to critical infrastructures, after grid failure, is a crucial need arising in scenarios that are increasingly becoming more frequent. Here, this article proposes a seamless transition strategy using a single and unified mode-dependent droop controlled grid-forming inverters. The control strategy achieves the following objectives: 1) regulates the output active and reactive power by the droop-controlled inverters to a desired value while operating in on-grid mode; 2) seamless transition and recovery of power injections into the load after grid failure by inverters that operates in grid-forming mode all the time; 3) requires only a single bit of information on the grid/network status for the mode transition. A framework for assessing the stability of the system and to guide the choice of parameters for controllers is developed using control-oriented modeling. A controller hardware-in-the-loop-based real-time simulation study on a test system based on the realistic electrical network of a commercial-scale medical center is conducted for initial prototyping of the control strategy. A hardware experiment is conducted with two 3 - $\phi$, 480 -V, 125 -kVA grid-forming inverters, a 3 - $\phi$, 480 -V, 270 -kVA grid simulator, a physical grid switch, and a physical load bank. The experimental data establishes the effectiveness of the always grid-forming operation and control of inverters in meeting power delivery objectives when on-grid and off-grid under various kinds of loads and scenarios while minimizing transients during transitions. Furthermore, performance comparison with existing strategies showcases the advantage of the proposed strategy.

24 POWER TRANSMISSION AND DISTRIBUTION↗
DOE OSTI2024

Electronic descriptors for dislocation deformation behavior and intrinsic ductility in bcc high-entropy alloys

Controlling the balance between strength and damage tolerance in high-entropy alloys (HEAs) is central to their application as structural materials. Materials discovery efforts for HEAs are therefore impeded by an incomplete understanding of the chemical factors governing this balance. Through first-principles calculations, this study explores factors governing intrinsic ductility of a crucial subset of HEAs—those with a body-centered cubic (bcc) crystal structure. Analyses of three sets of bcc HEAs comprising nine different compositions reveal that alloy chemistry profoundly influences screw dislocation core structure, dislocation vibrational properties, and intrinsic ductility parameters derived from unstable stacking fault and surface energies. Key features in the electronic structure are identified that correlate with these properties: the fraction of occupied bonding states and bimodality of the d-orbital density of states. The findings enhance the fundamental understanding of the origins of intrinsic ductility and establish an electronic structure–based framework for computationally accelerated materials discovery and design.

36 MATERIALS SCIENCE↗
DOE OSTI2023

An Observed Transition of Galaxy Spins on Void Surfaces

In linear theory, the galaxy angular momentum vectors that originate from initial tidal interactions with surrounding matter distribution intrinsically develop perpendicular alignments with the directions of maximum matter compression, regardless of galaxy mass. In simulations, however, galaxy spins exhibit parallel alignments in the mass range lower than a certain threshold, which depends on redshift, web type, and background cosmology. We show that the observed three-dimensional spins of the spiral galaxies located on the void surfaces from the Sloan Digital Sky Survey indeed transit from perpendicular to parallel alignments with the directions toward the nearest void centers at the threshold zone, 9.51 $\leqslant$ log[M th,$\star$ /(h -1 M ⊙ )] $\leqslant$ 10.03. This study presents the first direct observational evidence for the occurrence of mass-dependent spin transition of real galaxies with respect to non-filamentary structures of the cosmic web, opening a way to constrain the initial conditions of the early universe by measuring the spin transition threshold.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2026

Review of Particle Physics

The Review summarizes much of particle physics and cosmology. Using data from previous editions, plus 3,200 new measurements from 903 papers, we list, evaluate, and average measured properties of gauge bosons and the recently discovered Higgs boson, leptons, quarks, mesons, and baryons. We summarize searches for hypothetical particles such as supersymmetric particles, heavy bosons, axions, dark photons, etc. Particle properties and search limits are listed in Summary Tables. We give numerous tables, figures, formulae, and reviews of topics such as Higgs Boson Physics, Supersymmetry, Grand Unified Theories, Neutrino Mixing, Dark Energy, Dark Matter, Cosmology, Particle Detectors, Colliders, Probability and Statistics. Most of the 118 reviews are updated, including many that are heavily revised.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2023

Towards inverse microstructure-centered materials design using generative phase-field modeling and deep variational autoencoders

The field of Integrated Computational Materials Engineering (ICME) combines a broad range of methods to study materials’ responses over a spectrum of length scales. A relatively unexplored aspect of microstructure-sensitive materials design is uncertainty propagation and quantification (UP/UQ) of materials’ microstructure, as well as establishing process-structure–property (PSP) relationships for inverse material design. In this study, an efficient UP technique built on the idea of changing probability measures and a deep generative unsupervised representative machine learning method for microstructure-based design of thermal conductivity of materials is proposed. Probability measures are used to represent microstructure space, and Wasserstein metrics are used to test the efficiency of the UP method. By using deep Variational AutoEncoder (VAE), we identify the correlations between the material/process parameters and the thermal conductivity of heterogeneous dual-phase microstructures. Through high-throughput screening, UP, and the deep-generative VAE method, PSP relationships that are too complex can be revealed by exploiting the materials’ design space with an emphasis on microstructures. As a last point, we demonstrate generative machine learning serves as a useful tool for inverse microstructure-centered materials design, and we demonstrate this by examining the inverse design of thermal conductivity in nano-structured materials. Here, the results reveal the effects of morphology, volume fraction, characteristic length scale, and the individual thermal diffusivity of phases on the thermal conductivity of dual-phase alloys. Our findings emphasize the advantages of high-throughput phase-field modeling and generative deep learning for linking PSP and inverse microstructure-centered materials design.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Performance contracting centers of expertise: a framework for federal implementation

This report examines the establishment and operation of Energy Performance Contracting (EPC) Centers of Expertise (COEs) within the federal government. EPCs, including Energy Savings Performance Contracts (ESPCs) and Utility Energy Service Contracts (UESCs), are critical mechanisms for advancing energy efficiency, resilience, and infrastructure modernization without the need for significant upfront appropriations. However, EPCs require specialized knowledge in project development, contracting, financing, legal parameters and technical project oversight. Currently federal agencies have varying levels of expertise and institutionalized policy to effectively and consistently use congressionally authorized EPCs which have decades of proven and impactful use. To address these challenges, several federal agencies have created COEs to centralize expertise, standardize practices, and streamline implementation. This report reviews statutory and policy drivers, highlights the benefits and challenges and presents case studies from the General Services Administration (GSA), the Department of Veterans Affairs (VA) and the U.S. Army Engineering and Support Center Huntsville (HNC). Recommendations are also provided for agencies considering the establishment of EPC COEs, which will bring much needed structure, consistency and lead to implementation of these energy and infrastructure building projects to save costs for U.S. taxpayers.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2023

Biochemical and genetic studies define the functions of methylthiotransferases in methanogenic and methanotrophic archaea

Methylthiotransferases (MTTases) are radical S-adenosylmethionine (SAM) enzymes that catalyze the addition of a methylthio (-SCH 3 ) group to an unreactive carbon center. These enzymes are responsible for the production of 2-methylthioadenosine (ms 2 A) derivatives found at position A37 of select tRNAs in all domains of life. Additionally, some bacteria contain the RimO MTTase that catalyzes the methylthiolation of the S12 ribosomal protein. Although the functions of MTTases in bacteria and eukaryotes have been established via detailed genetic and biochemical studies, MTTases from the archaeal domain of life are understudied and the substrate specificity determinants of MTTases remain unclear. Here, we report the in vitro enzymatic activities of an MTTase (C4B56_06395) from a thermophilic Ca. Methanophagales anaerobic methanotroph (ANME) as well as the MTTase from a hyperthermophilic methanogen – MJ0867 from Methanocaldococcus jannaschii. Both enzymes catalyze the methylthiolation of N 6 -threonylcarbamoyladenosine (t 6 A) and N 6 -hydroxynorvalylcarbamoyladenosine (hn 6 A) residues to produce 2-methylthio-N 6 -threonylcarbamoyladenosine (ms 2 t 6 A) and 2-methylthio-N 6 -hydroxynorvalylcarbamoyladenosine (ms 2 hn 6 A), respectively. To further assess the function of archaeal MTTases, we analyzed select tRNA modifications in a model methanogen – Methanosarcina acetivorans – and generated a deletion of the MTTase-encoding gene (MA1153). We found that M. acetivorans produces ms 2 hn 6 A in exponential phase of growth, but does not produce ms 2 t 6 A in detectable amounts. Upon deletion of MA1153, the ms 2 A modification was absent, thus confirming the function of MtaB-family MTTases in generating ms 2 hn 6 A modified nucleosides in select tRNAs.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2025

Imaging Bias‐Driven Domain Wall Motion With Scanning Oscillator Piezoresponse Force Microscopy

Understanding ferroelectric domain wall dynamics at the nanoscale across a broad range of timescales requires measuring domain wall position under different applied electric fields. The success of piezoresponse force microscopy (PFM) as a tool to apply local electric fields at different positions and imaging their changing position, together with the information obtained from associated switching spectroscopies has fueled numerous studies of the dynamics of ferroelectric domains to determine the impact of intrinsic parameters such as crystalline order, defects and pinning centers, as well as boundary conditions such as environment. However, the investigation of sub-coercive reversible domain wall vibrational modes requires the development of new tools that enable visualizing domain wall motion under varying applied fields with high temporal and spatial resolution while also accounting for spurious electrostatic effects. Here, scanning oscillator piezoresponse force microscopy extends the investigation of domain wall dynamics to new regimes, providing direct visualization of domain wall position as a function of an external electric field that varies in time and location. In conclusion, this enables studying the energetics of field-driven ferroelectric domain wall motion, which is shown to obey a thermally activated flow regime in the millisecond timescale.

Piezoresponse Force Microscopy↗
DOE OSTI2021

Exact Landau Level Description of Geometry and Interaction in a Flatband

Flatbands appear in many condensed matter systems, including the two-dimensional electron gas in a high magnetic field, correlated materials, and moiré heterostructures. They are characterized by intrinsic geometric properties such as the Berry curvature and Fubini-Study metric. The influence of the band geometry on electron-electron interaction is difficult to understand analytically because the geometry is in general nonuniform in momentum space. In this work, we study the topological flatband of Chern number C = 1 with a momentum-dependent but positive definite Berry curvature that fluctuates in sync with Fubini-Study metric. We derive an exact correspondence between such ideal flatbands and Landau levels and show that the band geometry fluctuation gives rise to a new type of interaction in the corresponding Landau levels that depends on the center of mass of two particles. We characterize such interactions by generalizing the usual Haldane pseudopotentials. This mapping gives exact zero-energy ground states for short-ranged repulsive generalized pseudopotentials in flatbands, in analogy to fractional quantum Hall systems. Driving the center-of-mass interactions beyond the repulsive regime leads to a dramatic reconstruction of the ground states towards gapless phases. The generalized pseudopotential could be a useful basis for future numerical studies.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗